We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Carrying capacity 3000 kg Approx. Onsite Dimension. (l x w x h): 800 x 300 x 250 mm, weight approx.: 10 kg
used
Description: maximum load capacity 3000 kg  ,Power Ac / DC Approx. Onsite Dimension. (l x w x h): 400 x 400 x 300 mm, weight approx.: 15 kg
used
Hoist: DH 312 H12 Equipped with vaccuum pump + tank Kind of: overhead travelling crane Capacity: 5 ton Span: 16 350 mm Tackle speed: 1,3 & 8 m/min Numbre of riggers : single rigger
used
weight max.: 2 t stroke: . mm clamping width: . mm serial number: 8684 weight: 2020 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight max.: 0,5 t stroke: 500 mm height of hook: 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Year: ca. 1988 arm length: 2000 mm weight max. in kg: max. 1000 kg height of hook: max. 2000 mm WITHOUT LIFTING DEVICE: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Suspension crane: 2 Stück: : 1. Kran : dimensions: 2500 x 3800 mm : 125 kg : 2. Kran: dimensions: 2500 x 4800 mm : 125 kg for expample for assembly work: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 1000 kg year of manufacture 1985 -Documents: crane inspection book, operating instructions, -Base plate: Ø 685 mm -Projection: 4,390 mm -Total height: 4,350 mm -Hook height: 3,140 mm -Chain hoist: DEMAG type PK5N with main stroke 5 m/min, built in 1973 -Chain length: 3300 mm -Transport dimensions: 950/4630/H1890 mm -Own weight: 1160 kg
used
maximum capacity: 250 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,000 x 600 x 3,400 mm, weight approx.: 1,000 kg
used
Description: including Demag electric chain hoist, maximum load capacity 500 kg maximum capacity: 500 kg, throat: 4,000 mm, Approx. Onsite Dimension. (l x w x h): 4,600 x 600 x 4,750 mm, weight approx.: 1,000 kg
used
Description: Carrying capacity: 5000 kg Incl. runway Track dimensions: approx. 17000 mm Dimensions of the bridge: approx. 12000 mm Attention: the bridge crane can be transported on a normal standard truck Approx. Onsite Dimension. (l x w x h): 17,000 x 12,000 x 5,000 mm, weight approx.: 5,000 kg
used
Description: Carrying capacity: 320 kg Projection: approx. 3000 mm Approx. Onsite Dimension. (l x w x h): 3,500 x 500 x 2,500 mm, weight approx.: 500 kg
used
Description: boom maximum 2000 mm , Adjustable in the grid , with manual hydraulic pump maximum capacity: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,100 x 1,250 x 2,000 mm, weight approx.: 360 kg
used
used
Pillar jib crane, hall crane, workstation crane -Manufacturer: ABUS, column jib crane type VS load capacity 500 kg -Documents: crane inspection book, operating instructions, -Base plate: Ø 710 mm -Projection: 3045 mm -Total height: 4,075 mm -Hook height: 3,305 mm -Chain hoist: DEMAG type DKUN5-500KV1F4 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Chain length: 3300 mm -Transport dimensions: 3850/810/H1110 mm -Own weight: 720 kg
used
Atlas crane AK601. A5 for sale, YOC 1998
used
Crane hook truss TIGRIP turnstile, little used, slight signs of wear, good condition Load capacity: 1000 kg, Weight: 36 kg, Length of arms: 1.30m
used
Description: Crane runway length approx. 7000 mm, SWF hoist unit type CA1-045.2P-F, year of manufacture 2017, load capacity 500 kg Approx. Onsite Dimension. (l x w x h): 7,000 x 600 x 500 mm, weight approx.: 220 kg
used
Power 324 KW, Displacement 12419 ccm, Diesel, permissible Ges. Weight 26000 kg, abs. Mileage 463.083 KM, AMNERKUNG: The loading crane of the vehicle requires a TÜV approval!
used
Abgel. Running hours 7826 hrs., AMNERKUNG: Vehicle is not road legal!
used
Description: Voltage 380 V , maximum load capacity 250 kg Rail length approx. 4200 mm , with crossbeam and vacuum lifters without documentation Approx. Onsite Dimension. (l x w x h): 5,000 x 1,900 x 2,500 mm, weight approx.: 500 kg
used
maximum capacity: 250 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 600 x 2,500 mm, weight approx.: 450 kg
used
Description: Serial number 13643 with 4 grid-adjustable attachment points Total length 350 cm Load capacity: 2,000 kg Approx. Onsite Dimension. (l x w x h): 3,500 x 2,100 x 200 mm, weight approx.: 300 kg
used
Description: Serial number S5791 Adjustable anchor point Shackles, chains and accessories included Total length 210 cm Load capacity: 6,000 kg Including wooden bearing block Approx. Onsite Dimension. (l x w x h): 2,400 x 1,050 x 1,100 mm, weight approx.: 800 kg
used
Description: Including two load center mounts adjustable in the grid Total length: 410 cm Load hook adjustment range: 200 cm to 400 cm, Load capacity: 15,000 kg Approx. Onsite Dimension. (l x w x h): 4,100 x 400 x 1,000 mm, weight approx.: 1,000 kg
used
Description: Serial number 20131224 Total length: 460 cm Load hook adjustment range: 150 cm to 450 cm Load capacity: 17,000 kg Approx. Onsite Dimension. (l x w x h): 4,600 x 400 x 1,000 mm, weight approx.: 900 kg
used
Description: Track gauge 8000 mm Bridge wheel diameter 320 mm Rail width 60 mm Radio control - Hand control  , RAIL LIFT Drum diameter 324 mm Rope diameter 16 mm For further information attached PDF file serial number: 5,194, Hoist: electric chain hoist, Crane control: wired control, With rail: Yes, maximum capacity: 25,000 kg, Approx. Onsite Dimension. (l x w x h): 9,500 x 28,000 x 10,500 mm, weight approx.: 40,000 kg
used
Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 50t / 50t Span: 14500 ,mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 301043 Wheel diameter: 350 mm Trolley travelling speed: 5 / 20 m/min Disc brake Total electrical connection values Total connected load: 84 kW Starting current (for voltage drop calculation): 407,9 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011368, distance: 14,500 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 50,000 kg, Approx. Onsite Dimension. (l x w x h): 15,500 x 5,200 x 2,400 mm, weight approx.: 19,500 kg
used
Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2021 Two trolleys Load capacity: 100t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 304116 Number of wheels: 8 Wheel diameter: 500 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011067, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, Test report available: Yes, Self-running: Yes, Pulling height max.: 15 m, maximum capacity: 100,000 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg
used
Description: Double-Girder Overhead Travelling Crane as good as new manufactured by ABUS in 2022 Two trolleys Load capacity: 63t / 63t Span: 20150 mm Control: Radio control and operation via pendant control possible Crane trolley Drive unit number: AN 303333 , Number of wheels: 8 Wheel diameter: 420 mm Speed: 10 / 40 m/min Disc brake Total electrical connection values Total connected load: 148 kW Starting current (for voltage drop calculation): 747.7 A Please have a look at the video and the PDF files. Sling chains are not included in the scope of delivery serial number: 111-011364, distance: 20,150 mm, Hoist: electric wire rope hoist, Crane control: radio remote control, With rail: No, Test report available: Yes, Self-running: Yes, maximum capacity: 63 kg, Approx. Onsite Dimension. (l x w x h): 22,000 x 5,000 x 2,500 mm, weight approx.: 45,000 kg
used
Description: Pillar jib crane Pillar height 3550mm, jib arm length 3120mm Lower edge of jib arm 2750mm, cross-section arm 120x65mm Cross-section pillar 120x120mm Untested / defects or incompleteness cannot be ruled out Approx. Onsite Dimension. (l x w x h): 3,550 x 200 x 200 mm, weight approx.: 100 kg
used
There are 4 Abus cranes available. 1.) ABUS VS 355 2.)ABUS VS 3.)ABUS VS 4.)ABUS VS. 1) ABUS VS 355 incl. dowel plate, year of manufacture: 1987, lifting capacity 750kg, lifting height 3000mm, construction height approx. 3800mm, reach 4000mm. 2.)ABUS VS, year of manufacture: 1986, lifting capacity 1t, lifting height 4700mm, reach 5000mm. 3.)ABUS VS, year of manufacture: 1986, lifting capacity 2t, lifting height 4820mm, reach 5000mm. 4.)ABUS VS, year of manufacture: 1986, lifting capacity 2t, lifting height 4820mm, reach 5000mm.
Mobile car and scrap press type Ecotechnika P 5250 with loader crane. Good condition. Only 2950 operating hours. At call!
BOGENSORTIERANLAGE Manufacturer Gremser Type: S102-A2 Manr.: 410663 Built: 1999 Maximum size width: 102 cm Length: 142 cm Minimum size width: 40 cm Length: 50 cm Material grades 60 g / m2 to 120 g/m2, securities Arc Alignment +-0.1 mm Processing Minimum: 30 m / min Maximum: 140 m / min Maximum power 140 cycles / min Maximum stack height feeder: 1550 cm Good sheet display: 1600 cm Poor bow delivery: 1100 cm Maximum lifting weight 1000 kg Supply voltage 500 V AC Machine weight 2000 kg Dimensions: Width: 190 cm Length: 1220 cm Height: 270 cm Inlet height: 1750 mm Note: Sorts sheets of paper with quality defects (holes, stains, scratches and other irregularities, damage ? Total fault diagnosis was renewed in September 2005 Investment costs: 156,000.00 € Mistakes reserved!
used
Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...
used
-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...
used
Viledon Filter Mats, PA/560 G-10 TO Cut dimensions e.g. 2140 x 1229 or 4500 x 1436 or similar. The filter mats are superimposed, partly minimally contaminated on the side wheels, but otherwise as good as new. Delivery price 60% below new price plus VAT, packaging and transport. 8 €/m2 We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
used
Kat-No 06-1101-1 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 620 mm in the end Height Zyl: 1000 mm Total height: 1410 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Delivery: immediately from stock. All prices are ex works plus law VAT. ...
used
Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...
used
Steel silo type CB 3000, volume 3 m3, payload approx. 4.8 tons, net weight approx. 700 kg, outlet height 1,000 mm, outlet flap NW 250, 1 injection line, 1 vent pipe, 1 manhole lid NW 500 in the roof, 1 manhole lid NW 500 in cylinder, 1 riser ladder, 1 stand platform, forklift sphotos and crane eyelets.
used
Mini-silo type CB 1000, volume 1 m3, payload approx. 1,600 kg, net weight approx. 290 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eye and forklift holder
used
Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...
used
Ladies and gentlemen, Offer: 2 used HALLEN see pictures Dimensions approx. width 21.00m / length 40.00m / eaves 9.00m / first 9.65m Snow load approx. 85 kg/m2 / 2 x crane 12.5 tons approx. 13 meters wingspan Condition very good Sightseeing is possible at short notice. PRICE: on request The price of the hall without dismantling. The dismantling of the hall could be taken over by us. The reconstruction of the hall can be organized At the moment we can offer other high-quality halls in the size of 150 m2 to 12,000 m2. We will be happy to send you an offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake ...
used
Mini-silo type Piccolo 1.2, volume 1.2 m3, payload approx. 1,600 kg, net weight approx. 300 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eyelets and forklift holder
used
Mini-silo type Twinleg, volume 1.2 m3, payload approx. 2,000 kg, net weight approx. 390 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid in the silo roof, crane eyelets and forklift holder.
used
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
used
Steel silo type CB 3000, volume 3 m3, payload approx. 4.8 tons, net weight approx. 700 kg, outlet height 1,000 mm, outlet flap NW 250, 1 injection line, 1 vent pipe, 1 manhole lid NW 500 in the roof, 1 manhole lid NW 500 in cylinder, 1 riser ladder, 1 stand platform, Forklift sphotos and crane eyelets
used
UP Mini , Uni Push Repair / inspection and replacement pradler gear technology Pradler Transmission Technology info@pradler.com Service and Replacement PradlerGetriebetechnik.de Tel. 05242 / 43186 email: info@pradler
used
Cat. No. 06-1101-8 new with lid-round standing on feet from V2A – 2,000 litres top quality for the favorable price, the best high-grade steel to German Institute for Standardization welds minimally, stable feet standard equipment: material V2A, 1.4301 according to. German Institute for Standardization 17440, inside 3IIId=2B – outside marbles completely pickled, passiviert and neutralises rest outlet DN 50 level indicator with strip and scale swimming lid completely with accessories air-bleed valve and bleed valve air pump transport hooks for lid on / from state feet volume: 2,000 litres Diameter: 1,310 mm Cyl. Height: 1,500 mm Total Height: 2,165 mm feet: 3 surcharges upon request For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, exc ...