mini cnc milling used for sale

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

equipped with digital reading on 2 axes; swivelling head; incl. number of cutter holders Auction-ID: A1-45793-35

SK40 milling head, with flange, with quill and tool clamp, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, We would also have a smaller one from a DECKEL FP3A. Also with quill and clamping. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

Machine : Vert. Milling head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please enquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

No forklift available Auction-ID: A1-41993-92

Table milling machine STEHLE, nameplate not found, table size total approx. 80x110 cm, w. 3-roller feed Steff 2034

Lot of roughing and finishing milling cutters from manufacturer Garant and Holex, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-210

Lot of roughing and finishing milling cutters from manufacturer Garant and Holex, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-209

Lot roughing cutters from manufacturer Garant, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-215

Lot roughing cutters from manufacturer Garant, Sara, Titex, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-216

Lot of roller end mills, 7 pieces, different sizes, see pictures. Auction-ID: A1-45977-220

Lot of roughing and finishing milling cutters from manufacturer Garant and Sara, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-211

Lot of roughing and finishing milling cutters from manufacturer Garant, Holex, Hitachi, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-212

Universal milling head SK 40, presumably from Huron universal milling machine Auction-ID: A1-45977-224

Lot of shape milling cutters from manufacturer Garant, Osborn, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-219

Lot of roughing and finishing milling cutters from manufacturer Garant / Holex, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-214

Lot of roughing and finishing milling cutters from manufacturer Garant / Holex, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-213

Lot of shape milling cutters from manufacturer Garant, Holex, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-218

Lot of roughing cutters from manufacturer Garant, Sara, partly in their original packaging, different sizes, see pictures. Auction-ID: A1-45977-217

Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal650 mmCross700 mmVertical950 mmGeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate CabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerTableTable surface 740 x 420 mmNumber of tools 15Type of magazine WheelMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!Chip removal package with chip conveyorChip removal package with chip conveyor conte ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralHorizontal machining centre - Horizontal milling head - Chip trough with integrated Coolant tank 300 l / 130 gallo; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross1050 mmLongitudinal800 mmVertical1000 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BAdditional T-slot pallet 630 mm x 630 mmAdditional T-slot pallet 630 mm x 630 mm / 24.8 in x 24.8 in T-slots 14 mm / 0,55 in, clamping surface following DIN 55201-A2Clamping hydraulics 2/4 channe ...

GeneralUniversal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI Technical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minWorking area 1Longitudinal1150 mmCross710 mmVertical710 mmTool changerApplicationVertical Tool changer planevertical Type of gripperPick up Number of tools32 MiscellaneousClamping SystemHSK-A 63 Floor space/WeightDimensions (L x W x H)6,0 x 5,0 x 2,7 (7,0 x 5,5 x 3,5) mWeight approx.10700 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC rotary table integrated in rigid tableType of Measuring system Direct measuring systemMotor spindle 10,000 rpmMotor spindle SK 40 10,000 rpm4. Axes (swivelling range) +/- 360/000,1 degreeRotation speed max.4. Axis 30 rpmDistance between T-Slots 63 mmNumber of Slots 11Slot width 14 ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Signal lamp with 4 colours standardSignal lamp with 4 colours Red: General error Yellow: Intervention necess ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.10000 rpmWeight approx.5600 KgTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

5 pcs end mill MK, various, incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End mills ! Also have items with SK40 .

Brass blank, brass plate, sides milled, L-345mm, W-230, H-70mm, weight: approx. 48kg. Price: Euro 480,-, net ex works !

UNIVERSAL MILLING MACHINE Inv. No. 13.147J1 Make TOS Model FA3AH Mach. No. 1854 Table 300 x 1,375 mm Longitudinal Travel (X) 890 mm Cross Travel (Y) 275 mm Vertical Travel (Z) 400 mm Taper ISO 40 R.P.M. 45 – 2.000 KW 4 Volts 400 Cycles 50 Including Coolant attachment Emergency stop Auction-ID: A1-45737-175

UNIVERSAL MILLING MACHINE Inv. No. 12.315J1 Make INDUMA Model NL87 Serial number 75479 Table dimensions 2200 x430 mm Longitudinal travel (X) 1500 mm Cross travel(Y) 420 mm Vertical travel (Z) 530 mm Taper ISO 50 R.P.M. 36 – 1,350 (16x) HP 25 Volts 400 Cycles 50 Including: Universal Milling Head Coolant Auction-ID: A1-45737-110

CNC BED MILLING MACHINE Inv. No. 12.608LM Make RAMBAUDI Model VERSAMILL12 Control CNC PILOT GRUNDIG Mach. No. 82601 Table dimensions 1600x510 mm Longitudinal travel (X) 1.100 mm Vertical travel (Y) 820 mm Cross travel (Z) 620 mm Taper ISO 50 R.P.M. 22-2000 kW 8 Volts 380 Auction-ID: A1-45737-111

Auction-ID: A1-45737-148

NCT A3400 – CNC Milling Machine General data: Manufacturer: NCT Kft., Budapest Model: A3400 Year of manufacture: 2020 Serial number: P19075 Machine type: CNC machining center Condition: Unknown Technical details: Power: 22 kW Voltage: 400 V Current: 38.83 A CE marked: yes Equipment: Heidenhain DA 400 air preparation unit Enclosed working area CNC control panel Description: Modern CNC milling machine NCT A3400 designed for precision machining operations. The machine features a fully enclosed workspace, advanced control system, and integrated air preparation unit, making it suitable for industrial production environments requiring high accuracy and reliability. Auction-ID: A7-46004-1

Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.

Highly dynamic precision milling machine OPS-INGERSOL EAGLE-V5 / Precision-Line Year of Make: 2025 Travel distances: X= 550 mm, Y= 400 mm, Z= 400 mm Table Type: Swivel Rotary Table / Torque Drives Spindle holder: HF spindle HSK-E40 with DDF; Fisherman Spindle speed: 1 - 42,000 rpm Spindle power: 15kw Torque S6 (60%) 6.7Nm Tool magazine: 100 places Control: HEIDENHAIN Weight: 8500Kg

Spindle swivel: No; Height adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: Scala; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000, speed display defective; Motor power: 5 / 6 kW; Engine brake: Yes, manual; Suction port: 120mm; Machine length: 2500mm; Machine depth: 900mm; Weight: 800kg; Powerful design in all details.High cutting performance, lifelong durability

Spindle swivel: No; Sliding sled: Yes; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 40 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5 kW; Engine brake: Yes automatic; Extraction port: 2 x 120mm; Machine length: 1200mm; Machine depth: 900mm; Weight: 600kg;

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: mech. counter; Swivel angle indicator: -; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4000, 5000, 6000, 8000, 10000; Motor power: 5 / 6.2 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2600mm; Machine depth: 900mm; Weight: 700kg;

Engine power: 2 hp; heavy standing model

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 2800, 4500, 6000, 5600, 8000, 12000 rpm; Engine power: 4/5.5hp kW; Engine Brake: Manual; Extraction port: 2 x 120mm; Machine length: 2000mm; Machine depth: 900mm; Weight: 700kg; Powerful design in all details.High cutting performance, lifelong durability

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: mech. Counters; Swivel angle indicator: mech. Counters; Milling stop indicator: mech. Counters; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Spindle swivel: Yes 0 to 45Â; Height adjustment: electric/position control; Swivel adjustment: electric / position control; Milling fence adjustment: electric / position control; Milling jaw adjustment: manual / handwheel; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Aigner integral stop: yes; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm;

Spindle swivel: Yes -5 to 45Â; Height adjustment: manual/handwheel; Spindle stroke: 142mm; Swivel adjustment: manual / handwheel; Stop adjustment: manual; Altitude display: Scala; Swivel angle indicator: Scala; Milling stop indicator: Scala; Spindle diameter: 30 mm; Spindle length: 140mm; Max. tool diameter: 250mm; Speeds: 3500 / 6000 / 8000 / 10000rpm; Motor power: 5.3 kW; Engine brake: Yes, automatic; Table size: 1000mm x 520mm; Carriage length : 1200mm; Suction connection: 2 x 120 mm; Machine length: approx. 1200 mm; Machine width: approx. 900 mm; Weight:

Spindle swivel: Yes 0 to 45Â; Height adjustment: handwheel / electric; Swivel adjustment: handwheel / electric; Milling jaw adjustment: manual; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Working width: 260 mm; Working height: 130 mm ; Working waves: 5; Spindle arrangement: down, right, left, up, down; Slot bed: yes; Motor power shaft bottom: 5.5kW; Motor power shaft right: 5.5 kW; Motor power shaft left: 7.5 kW; Motor power shaft top: 7.5 kW; Motor power shaft bottom: 7.5 kW; Adjustment shaft bottom: crank; Adjustment shaft right: crank; Adjustment shaft left: crank; Adjustment shaft top: crank; Planer heads: Centrolock; Feed speed: infinitely variable; Feed roller pressure: pneumatic; Current consumption: 50A; Current consumption: 71.7A;

Milling fence adjustment: via handwheel; Milling stop Gauge: Siko meter; Milling jaw adjustment: handwheel; Milling jaw gauge: Siko counter;