mini cnc milling used for sale

Specifications / Technical data S-400/T CNC-Portalfraesmaschine / Engraving machine Granite, marble, slate, soapstone engraving, photoengraving, fraesen... With the T-variant of the High-Z CNC-Fraesmachine you acquire old-guarded technology with the certain i-Tuepfelchen in TUeV-Qualitat. The High-Z/T is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circulation spindles used, the High-Z/T CNC-Fraes machine achieves a fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This means engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty journeys with the new High-Z/T. This makes t ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machi ...

Item condition: New. Machine is delivered pre-assembled and tested! Specifications / Specifications S-720/T CNC-Fraesmaschine and G raviermaschine / Fraese With the T-variant of the High-Z CNC Fraes.- and engraving machine you acquire old-fashioned technology with the certain I-Tpfelchen in TUeV-certified quality (EMC). The High-Z/T CNC-Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. The high-Z/T CNC-Fraese achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm due to the ball's circulation spindles. At the same time, high travel speeds of up to 108mm/second ( 6500mm/ minute) can be achieved. This allows engraving and feeding speeds of up to approx. 4500mm/min and express ingess esons up to approx. 7000mm/min. Here you can watch a video of empty journeys with the new High-Z/T. This i ...

The range of applications of a RaptorX-SL CNC Fraes machine is extremely large due to the maximum adjustable working area (read-through under bridge variable: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge). special large foods up to 17,500 mm ( at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ), wherein this is rather unpromising due to the mostly applied layer structure  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

Hartford PRO 1000 A machining center The article has been checked for function, the technical condition is perfect. Optical wear exist, the exact state of the article can be found in the article images. Qk0270k Workspace: X 1,020 mm, y axis 520 mm, Z axis 550 mm Accessories and details: HEIDENHAIN control iTNC 530 Ceramic bearing spindle 12000 RPM. Coolant d. spindle (20 bar) HEIDENHAIN Handwheel 24 - specialized magazine Vises and tools do not belong to the auction/scope of delivery! If you are seriously interested, appointments are welcome. Interested parties are always welcome. If you have questions, I am like available.

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

- Working range X - Axis 1300 mm- Working area Y - Axis 1300 mm- Working area Z - Axis 200 mm- Working accuracy -+0.04/300 mm- Vacuum - Scanning table with 4 sections and T-slots including vacuum pump- Max. Travel speed 10000 mm/min- Max. Working speed 6000 mm/min- milling spindle motor 2.2 kW / ISO 20, water-cooled tool changer 6-fold, side-collet tool holder diameter 3, 6, 8,10,12 mm- speed Milling spindle 6000-18000 rpm- Drive motors stepper motors- Voltage 400 V/50Hz guide in X,Y Direction linear guide + rack guide in X, Z-direction linear guide + ball roller spindle- command language G-code- DSP control NK 105 (option: Mach3 control, PC and Monitor)- CAD/CAM Software Vectric CUT2D PRO (NESTING Inclusive)- Workpiece positioning, pneumatically lowerable stops 1 x pieces in X ,2 pieces in Y- tool lengths Sensor safety light barrier regulation according to EN 848-3 (optional one-sided,  ...

Tool to CNC milling center Steep cone-cone SK 40 Vsadrq with tightening bolt Tool according to the pictures flat rate EUR 6980.00 Built in 2003 In good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

A used S O R A L U C E CNC driving stand milling and drilling center FS 16000 Built in 2000 MAIN TECHNICAL DATA: Travel: Longitudinal (X): mm 16000 Senkr. (Z): mm 1600 Cross (Y): mm 1500 Milling and drilling spindle: Tool holder: ISO 50, DIN 69871 Auto. Tool tension: clamping force 15000 N Tightening bolt: DIN 69872 Form B (BT50) Spindle speeds: Special speeds: rpm 20-3000 Feeds: Feed range: mm/min 2-5000 Rapids: X-axis: mm/min 12000 Y- and Z-axis mm/min 15000 The machine is equipped with: - HEIDENHAIN control TNC 426 M. - Operator's platform in the X-direction with sliding door and Viewing windows against chip flight and splashing water. - Operator's console swivels mounted on the stage. - Automatic thermal expansion compensation of the Milling sliders. - Automatically indexing milling head. This milling head enables the fully automatic m ...

Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight approx 9 T

CNC Horizontal Milling Machine LAGUN Model G Cosmos 20 Manufacturer: LAGUN Model: G Cosmos 20 New in: 2004 Condition: very good, complete Control: Fagor 8055 Table dimensions: 2000 x 700 mm Distance from table to column: 1217 mm T-slots: 5x18x116 mm Max. workpiece weight: 4000 kg X axis travel: 2000 mm Y axis travel: 800 mm Z axis travel: 1000 mm Spindle taper: ISO 50 Spindle speed: 15 000 rpm Rapid traverse rate: 24 mm/min Main motor power: 17 - 20.5 kW Total power required: 27 kW Machine weight: 10 600 kg Dimensions: 5495x3440x3016 mm

CNC controlled 3 axle system a 3 axis system for various Aufgaben(wie Fraesen, Bohren, gravieren, Handhabung, Lasern, Laborarbeiten, etc.) X-Y axes are created by IEF. Traverse paths x 200 mm, Y: 320 mm Z axis (FESTO) operated pneumatically. Stroke Z: 95 mm 4 x supports height 330 mm Control IEF, PA control Alu-Profilrahmen(4x4cm) with 4 doors with automatic locking system. Dimensions: L x D x H (CA. 1390 x 990 x 2000 mm) Aluminum table top Cabinet

With CNC control, HEIDENHAIN, Type: TNC 155, measuring taster Separate control cabinet: 1260 x 500 x 1700 mm Travel distances 700 x 550 x 550mm Table area 1000 x 490 mm Accessories: Treatment / Cooling system / tool shots The machine stored since 2013. At the time of storage, the machine was fully functional.; ready for use

No. 3087: 1 gebr. 5-axis milling machine Fabr. BOHNER & KÃ?HLE, VH 2 type / 10 K with control Fidia V 7.2 arb.-ber.: 1500 x 1500 (1000) x 975 mm Power: 14 kW Accessories: Table 2500 x 1000 mm 16 x tool changer Cup other: Spindle retainer for SK 50 Spindle speeds 40-5600 min-1 RADIUS Milling spindle 1030 mm Weight 12500 kg

No. 4304: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 3 CC Bu. 1990 with Sinumerik 880 ARB.-ber.: 400 x 400 x 500 mm, power: 6 kW Accessories: rigid table full cab Electronic Handwheel Documentation other: spindle retainer for SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m / min Space ca Weight approx. 3 to

: 4378 No.1 gebr. CNC milling machine with 4 cutting heads Fabr. RAMBAUDI, Rammatic 804 type Bu. 1992 with HEIDENHAIN iTNC 530 ARB.-ber.: 1500 x 815 x 815 mm, power: 4 x 11 kW Accessories: clamping table 3250 x 815 mm Maximum table load 5000 kg other: spindle retainer for SK 50 Speed range 40 - 3600 min-1 Quill stroke 150 mm Space requirement approx. 8 x 4 x 4 weight approx. 20 to

Milling Machine MAHO MH 700 C CNC- 5 axis CNC- Phillips 432 X/Y/Z- 700/450/500 mm B axis CNC Universal table 820x480 mm 5th axis- CNC/NC dividing head ISO 40 spindle adapter Quill stroke of spindle 100 mm Universal table: -swiveling of the Horizontal X/Z axis 30 degrees -swiveling of the vertical Y axis 360 degrees Spindle speeds infinitely variable 20-3150 rpm

X: 500 mm Y: 360 mm Z: 400 mm Speed range: 40-2000 RPM Spindle retainer: SK 40 DIN2079 Control: HEIDENHAIN TNC 155 Total power: 6 kW Machine weight: 2000 kg Dimensions (W x D x H): 2.8 x 2.9 x 1.9 m Condition: good, ready to use

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Control : Heidenhain TNC 355 Travel X - Path 560 mm Y - Path 500 mm Z - Path 400 mm Table 900 x 460 mm Spindle speeds 40 - 4000 rpm. Spindle holder SK 40 Drive power 8 kw Weight 2900 kg

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

No. 3999: 1 used Universal tool milling machine Make HERMLE, type UWF 801, 1988 with Heidenhain TNC 135 Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid Table 800 x 390 mm Chip tray Documentation Other: Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg

x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe

No. 2179: 1 used Universal tool milling machine MAKE HERMLE, type UWF-801, built 1980 with Heidenhain TNC-124 track control Working range: 500 x 430 x 400 mm, drive power: 3 kW Accessories: Rigid table 800 x 350 mm, Chip tray, automatic tool clamping, Coolant device, operating instructions, electronic handwheel in the control panel Other: Spindle ISO-40, Speed range 45-2000 rpm, Feed range 4-1600 (1000) mm/min, Rapid speed 1.6 (1) m/min. Space requirement approx. 2.3 x 2.3 x 1.8 m, Weight approx. 1100 kg.

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

5 Axis Universal Machining Center with Nikken Rotary Tilt Sub-Device and Erowa Pallet system Manufacturer DMG Model DMU 100T Built in 2003 Control MillPlus IT Travel X / Y / Z 1080 x 710 x 710 mm Nikken rotary tipping table 32-fold tool changer / SK 40 Erowa Robot Easy Automation Integration with 12 stations and 31 units Erowa clamping systems

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

SHW UFZ 5 S with tool robot for 60 tools. X 4000, Y 1100, Z 1100, spindle 6000 rpm, round table Dm 1250, pitch 360000, also with horizontal dividing head with steady, pitch 3600000, internal cooling 16bar. Very few operating hours. Condition: excellent (used)

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Micron WF 61 C Equipped with a controlled round table Workspace X-axis: 800mm Y-axis: 500mm Z-axis: 460mm Table: 1000 x 500mm Number of working spindle speeds: 21 Speed range 40-4000 rpm Pinole movement vertical: 90mm Feed speed in all 3 axes: 1-3000 mm/min

Lid Maho DMC 80 U hi-dyn Workspace: X-axis: 800mm Y-axis: 700mm Z-axis: 600mm Workpiece weight: 800 kg Number of axes: 5

Mikron VCP 800 2007 Built in 2007 Control Heidenhain iTNC 530 Travel X-800mm , Y-650mm , Z-500mm Working spindle: Spindle speed max. 12000rpm. Tool magazine: Number of tool slots 36 Machine table: Clamping area 800 x 650mm Accessories: Inner coolant supply - Belt filter system 20Bar Conveyor

5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm

DATA ON THE MACHINE Machine type: CNC milling machine Manufacturer: HERMLE Model: UWF1001H Built: 1991 Condition: used Location Warstein , Germany Reference M-HER-0221 Description We offer you a used CNC milling machine from manufacturer Hermle. Control Heidenhain TNC 407/415 Monitor new x-path 700 mm y-path 550 mm z-way 500 mm Table clamping area 650 x 395 mm Spindle speeds - infinitely 20- 4200 rpm Spindle holder ISO 40 DIN 2079 Pinole stroke vertical 95 mm Drive spindle motor 12 kw Machine weight approx. 3.8 t Space requirements approx. 5 x 4.6 x 2.5 m Electrics 400 Volt Coolant device Fixed angle table 1000 x 490 mm Vertical milling head swivel. +/- Full-protection cabin Separate control cabinet (absolutely clean and uncrafted) electronic handwheel Our offer is aimed at professionals who are covered in accordance with the Trade Code in accor ...

Description CNC tool milling machine from lid suitable for tooling, fixture construction, training as well as mold making Travel: 1200x600x500mm Speed: 20-6300 rpm Technical data Control CNC Dialog 11 Table 1500 x 675 mm Longitudinal path (X,Y,Z axis) 1200x600x500mm Tool changer no Tool holder: SK 40 Vertical spindle speeds: 20-6300rpm Feeds 2-5000mm/min Connection 50 Hz 3x 380V Spindle motor 7.5KW Machine weight approx. 8200kg Dimensions 3300x2400x2400mm

Description CNC tool milling machine from Kunzmann suitable for tooling, fixture construction, training as well as mold making Travel: 600x400x400mm Speed: 50-4000 rpm Technical data Control CNC Heidenhain 310 Table 800 x 425 mm Longitudinal path (X,Y,Z axis) 600x400x400mm Tool changer no Tool holder: SK 40 Vertical spindle speeds: 50-4000rpm Feeds 2-5000mm/min Connection 50 Hz 3x 380V Spindle motor 5.5KW Machine weight approx. 1800kg Dimensions 2000x1700x3000mm

Description CNC tool milling machine from lid suitable for tooling, fixture construction, training as well as mold making Travel: 600 / 500 / 500 mm Speed: 50-6300 rpm Control Dialog 11 Technical data Control CNC Dialog 11 Table 900x528mm Longitudinal path (X,Y,Z axis) 600 / 500 / 500 mm Tool changer no Tool holder: SK 40 Vertical spindle speeds: 50-6300rpm Feeds 2-6000mm/min Connection 50 Hz 3x 380V Spindle motor 7.5KW Machine weight approx. 2700kg

Description CNC tool milling machine from DMG suitable for tooling, fixture construction, training as well as mold making Travel: 350x240x340mm Speed:20-6300rpm Technical data Year built / YOM 1999 Spindle speeds 20-6300rpm Steuerung / Control Siemens 810 D Shopmill Feeds 2-5000mm/min Table / Table 400x280mm Engine / Motor 5.5Kw Longitudinal / Travel (X,Y,Z) 350x240x340mm Machine Weight /Weight ca 1600kg Tool holder / Taper SK 40 Dimensions / Dimension 2000x2000x2000mm

DECKEL MAHO DMU 100 T YEAR OF CONSTRUCTION: 2001 - Number of axes: 5 ( simultaneous) milling spindle - Tool holder: SK40 - Spindle drive power: 15 [kW] - Spindle speed: 20 - 12,000 [up] LINEAR ACHSEN - Travel X/Y/Z axes: 1,060 x 710 x 710 [mm] - Rapid speed (X/Y/Z) : 30,000 [mm/min] - Feed speed (X/Y/Z) : 20 - 15,000 [mm/min] SCHWENKACHSE A : SCHWENKKOPF - Travel: 90 [degrees](+/-) - Minimum resolution: 0.001 [degree] SCHWENKACHSE B : NC ROUND TABLE x 800 [mm] - Travel: 360 [degrees](+/-) - Minimum resolution: 0.001 [degree] WERKZEUGWECHSLER - Number of tools in the magazine: 32 ( 2x 16 places) table - Table size: 1500 x 795 [mm] - Loading table max. : 500 [kg]

60P Hi-Dyn 5 Axis CNC Machining Centre (2005) - Heidenhain Heros iTNC530 Control, - CAT40 Taper, - 630mm Diameter Table, - 60 Tool ATC, - Swarf Conveyor, - Coolant Filtration. S/No. 1116-000201-3 - - include CAT 40 Tooling suitable for Deckel Maho with Universal 3D Tester. - Aditional table with holders - 26 tools holder included AND 3d PROBE - HIGH PRESSURE 40 BAR COOLING TROUGH SPINDLE - COOLING TROUGH SPINDLE - NEW CHILLER IN 2021 - NEW HARD DISCS IN 2021 DECEMBER SPINDLE HOURS: 21400 MOST OF TIME MACHINE CUT FIBERGLASS AND PLASTIC, ALU and a bit mild steel. For customer we organize free loading . Transport we organize as well with an separated offer.

Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Milling machine lid FP 4 NC Built c. 1992 with controlled C-axis 2 pieces of screw sticks Various tool holders Machine is in top condition and was last serviced on 20.08.2020 for approx. 3.000,- € (net). documents available. The machine is sold only because of space requirements. Location of the machine: 76661 Philippsburg

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

Machine details Stock number 1105-03328 Machine type tool milling machine - Universal Make MAHO Type MH 800 E Year of construction 2000 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock price Technical details x-path 700 mm y-way 550 mm z-path 500 mm Speed 20 - 5000 rpm Tool holder SK 40 Quibola stroke vertical 80 mm Feed 1 - 5000 mm/min Rapid speed 6000 mm/min Table size 900 x 550 mm Total power requirement 16 KVA Weight of the machine ca. 7 t Space requirement approx. 2.4 x 2.85 x 2.1 m Information - with web control CNC 532 - with FIXED ANGLE TABLE WITH TOOL CHANGER - Enclosure Machine under power Ready for demonstration.