mineral water used for sale

Cooling capacity: ? W volume capacity: ? m³ / h Packing: 0,65 0,80 1,15 m Shipping weight: ca. 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Volume 16300 L Material V2A Isolated design Horizontal design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Description Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet

Ice water system Langheinz L 130 with ice bank: 30 kg Water connection: 1/2" Weight empty / operating approx.: 65kg / 160kg Energy consumption at 100 litres: 1.5 - 2.5 KWh Connection 220V Used device cleaned with warranty Option: Maintenance contract Delivery Instruction & Commissioning

Ice water system

Rehsler TW HL4006D Refrigeration System Voltage: 400 V Rated power: 11 kW Current consumption: 18 A Degree of protection: IP54 Ab. Operating pressure: 10 bar Minimum ambient temperature: 5º C Maximum ambient temperature: 43º C More items - new and used - can be found in our shop! International shipping costs on request!

Water cooler

Lohberg food distribution Dimensions: Width: 2100 mm Depth: 850 mm Height: 800 mm Height with glass shelf 1170 mm Depth with tablet tray: 1180 mm Basin: W x L x D 300 x 510 x 200 mm Water supply via water connection to the pools More items - new and used - can be found in our shop! International shipping costs on request!

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - / Contact us at -

Make: CARRIER Type: 30AWH016H-9 Power: 16kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH008H Power: 8kW Weight: 120kg Single-phase 230V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH012HD9 Power: 12kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Make: CARRIER Type: 30AWH015HD9 Power: 15kW Three-phase 380V for heating and cooling with built-in pump, expansion tank, control 1" inch connectors NEW Original packaging

Output: 40000 U/h // Bottle Size: 0,5

Output: 25000 U/h // Bottle Size: 2,5

Output: 10000 U/h // Bottle Size: 0,5

Pero Washing Machine 2600/016GR.2W-4667

Hyfra Cooling Water Recirculating Cooler CWK70 Power range: 6.4 kW Year of construction 2009 Refrigerant R410A Mains voltage 400V / 16 A / 3Ph Hose connection 3/4" ID19 VAT is shown EXW, pickup available without warranty

Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter width 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry

Water Distillation Plant for WFI Water Manufacturer : Kemiterm Type: 1000MS-6 Technical specifications : low pressure 5/3 bar high pressure 8/5 bar Temperature 100 °C / 85 °C GMP Distillation capacity up to 2200 l/h Documents: available

WATER COOLING TANK, for strand pelletizers, Constructed in AISI4304 stainless steel, On 4 wheels (2 with brakes), Overall dimensions : LxWxH 2,5 x 0,5 x 1,0 mt., tank : LxWxH 2,5 x 0,5 x 0,25 mt., conditions: very good

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 295 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/volvo-td121gpb-pump-580mh-used/4231 6, , = More information =, , Empty weight: 1.850 kg, Type number: TD121GPB POMP 580M³H

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 357 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/volvo-td121gpb-pump-580m3h-used/423 17, , = More information =, , Empty weight: 1.850 kg, Type number: TD121GPB POMP 580M³H

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/pumps/mtu-16v4000-pump-3600m3-hr-used/178 90, , = More information =, , Empty weight: 12.100 kg, Height: 3000 cm, Type number: 16V4000 POMP 3600M³/HR

Engine Brand: MTU, Condition: NEW, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/pumps/mtu-16v4000-pump-3600m3hr-used/1787 2, , = More information =, , Empty weight: 12.150 kg, Type number: 16V4000 POMP 3600M³/HR

Engine Brand: IVECO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Rated Speed: 1800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/iveco-1-used-pump/23200, , = More information =, , Year of construction: 1010, Type number: 1

Engine Brand: ARMSTRONG, Condition: USED, Engine Cooling Type: Air Cooled , Engine Color: Red , Working Hours: 38 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 16.5 Kw, Rated Speed: 2900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/armstrong-srt25653-pump-121l-min-us ed/17879, , = More information =, , Type number: SRT25653 pomp 12,1L/Min

Engine Brand: ARMSTRONG, Condition: USED, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 62 Kw, Rated Speed: 2900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/armstrong-4104-pump-2720-l-min-used /17873, , = More information =, , Empty weight: 1.250 kg, Type number: 4104 pomp 2720 Lit/min

Inv. Num. : 6800 Type: 6020 Producer: RT Created: 2016 Parameters: Work table length: 6000 mm Work table width: 2000 mm Machine weight: 8000 kg Equipment: 3D Head TECHNI Possibility of 3D cutting

- Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...

This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions.

This 3-axis CMS tecnocut JP 60hp was manufactured in 2008. Its a waterjet cutting machine designed for precision in cutting a wide range of materials. Consider the opportunity to buy this CMS tecnocut JP 60hp waterjet cutting machine. Contact us for more information.

This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine.

This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information.

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.