131,501 used machines on RESALE, but how to find them? Machine Search
Banding machine with special dimensions. Frame size: 640 mm wide and 350 mm high. Belt width used 30 ( 28 ) mm. Due to the special belt guide, the insert is extremely thinner materials possible. Foil up to approx. 40 μm descending, paper up to approx. 70 g/m² . Compressed air is required for operation.
Professional pallet wrapper with stretch film height adjustment Turntable diameter 1,600 mm max. load 1,600 kg Film roll width 500 mm Weight approx. 500 kg Supply voltage 400V - 50 Hz - 3 Ph
Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,
large working width: 2040 mm for iron sheets up to approx.: 1 mm Dimensions: 2650 x 650 x 1180 mm Weight: approx. 680 kg
Professional packaging machine from a renowned European manufacturer for tape width up to 50 mm. Maximum carton dimensions approximately: width 650 mm x height 650 mm; length unlimited. Minimum carton dimensions approximately: width 130 mm x height 120 mm x length 160 mm. -No settings required for different carton formats. -Double-sided closure at the top and bottom. -Transport drive on the side. -Contact pressure infinitely adjustable for automatic width and height adjustment. -Adjustable working height of the machine. -Capacity approx. 800 cartons per hour. -Transport speed approx. 20 m/min. -400 V / 50 Hz. The machine can be demonstrated under power.
Key data: 530 mm, 3000 mm, 4 St.
SPECIFICATIONS: Working dimensions mm: 3000 x 530 Speed 5000 rpm Number of knives: 04 Installed capacity: KW 5.5
Key data: 630 mm, 240 mm, 7 kW
SPECIFICATIONS: Max. machining width mm: 630 Max. working height mm: 240 Installed power: 7.5 KW Feed speed: 6-18 m/min Roller with 4 blades Voltage: 380 volts Manual operation
Key data: 12 , 10 , 18
Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP ...
2-hole paper drilling machine Hole spacing 80mm Paper Insertion Height 45mm Heavy Cast Iron Table Table size W61 x D80 x H68 cm 220V=1.9A / 380V=1.1A
Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder
Cleaned & Checked Model 54S Number of heads: 1 Maximum stack height (mm) 50 Tabletop model Power supply (V) single or three-phase Power 220V=1.05A / 380V=0.6A W x D x H (cm) 80 x 54 x 73 Weight, net (kg) 30
accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice
Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg
Key data: 3000 W, 1500 , 3000
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts ...
STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...
Cariba C300 horizontal cartoner with automatic bottle infeed, continuous motion, reverse tuck closure, GUK pre-folded leaflet inserter, carton size range: min. 15 x 15 x 55 mm (AxBxC), max. 150 x 90 x 220 mm (AxBxC), output up to 250 strokes/minute, electrics 400V/50Hz, machine net weight approx. 2000 kg
colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used spiral mixer Diosna SP 200 D, overhauled, as good as new, for 200 kg dough, 2 clocks, stainless steel kettle, stainless steel spiral, machine no. 9912-174, electrics renewed, repainted, new bearings, new V-belts
used slinging machine Rego SM 3, overhauled, 30 litres, with 2 boilers (20 and 30 litres) and 2 tools (fine and coarse), 1.5 hp, 5.2 A, 380 V, serial no. SM3/166/10
Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Counter and preset for number of discs with integrated drawer Circular knife made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Used machine cleaned with 3 months warranty Many more bread slicers in stock!
Bread Slicer Circular Knife Machine Wabäma Model: R 300 EX The all-rounder among bread slicers EX model for installation in the sales counter! max. number of slices: 140 pieces/min. max. bread dimensions: 250 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Circular knife made of high-quality Teflon special coating Machinery on the move Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 620 x 750 x 860 mm, WxDxH Used machine cleaned with 3 months warranty We stock a wide range of bread slicers!
Bread cutter Wabäma Model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Machinery on the move Cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine cleaned Many more bread slicers in stock!
Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour
Capacity: 120kg of green coffee per roast (480kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas Burner: Weishaupt indirect modulated The roaster is completely refurbished with: new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (PLC and touchscreen, Artisan and Cropster connection possible) new cooling bin sheathing new modulated burner new paint (powder coating) Inspection of the roaster is possible at any time.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6012 1,5kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 1.5kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-T-6035 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Energy requirements: 24.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head mov ...
SPECIFICATIONS: Number of drill bits: 35 (1/2 right - 1/2 left) Drilling distance mm: 32 Table width mm: 1250 03 Clamping jacks Installed capacity KW: 3.0 Electrical/pneumatic operation
Conventional Vertical Lathe O-M TMS2-18/40 Made in 1975. Table size: 1800mm Max swing: 4000mm Max turning height: 1500mm Condition Under power.
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-TA-6022 3kW Specifications - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 0.0G - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service yo ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-C2 6kW / VF2560-6000W Specifications - Maximum sheet size: 6000x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 6000kg - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommended thickness 10.0mm, maximum thickness 12.0mm Structure parts ...
Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-CT2-6022 6kW Specifications - Maximum sheet size: 6050x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 - Length: 14580mm - Width: 4300mm - Height: 2350mm - Weight: 16800.0kg Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm - Brass: recommen ...
Inv. Num. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC 31i-B Duty cycle: 8981 h Maximum turning length: 600 mm Maximum turning diameter over bed: 300 mm Maximum turning diameter over support: 230 mm Number of spindles: 2 pieces Maximum main spindle power: 22 kW Spindle clearance: 76 mm Maximum spindle speed: 5000 1/min Maximum workpiece weight: 120 kg Max. rod diameter: 65 mm Axis X1/X2: 165/190 mm Axle Z1/Z2: 700/720 mm Axis Y: 100 mm B-axis: 770 mm C1/C2 axis: 360 Weight: 7800 kg Equipment: Bar feeder SS 2500 Conveyor Feeder/Dispenser
Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm
Zig - Zag Veneer Splicing Machine Kuper Type: FW-Pimus (special model) Year of construction 2008 Nominal current 4 A Voltage: 230 V Specifications: Stand projection: 920 mm Working height: 950 mm Veneer thickness: approx. 0.4 to 2.0 mm (also thick veneer) Feed in 3 stages: approx. 10 to 23 m/min 3 K heating system. The new temperature control ensures optimal melting results of the adhesive thread and thus ensures a perfect connection. Discus discs with tolerance compensation mechanism Electrically controlled thread tear-off roller new heating system with standstill control Frequency converter controlled drive Space requirement: approx. 1,400 x 560 x 1,470 mm Incl. accessories
Barwell Cryogenic Deflashing and Deburring Machine Freeze Trim Chamber Model BFT10
strapping machine Mosca RO-M Manufacturer: Mosca Type: RO-M Semi-automatic cardboard strapping Band width: 4 to 12 mm Hot wedge welding system Adjustable belt tension Control: ecomat 100 Foot pedal for strapping release Table surface: W 640 mm Working height: 830 mm Power supply: 400 V More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well
Cardboard shears , Cardboard cutting machine , Cutting length 110 cm . Masive steel table top , Cleaned and tested
POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.
Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...
Stock number: 3886 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 15521, Year of manufacture: 2002 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30,000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 530 Fabr. Operating hours spindle 10220 hours Accessories: Chip conveying. Cooling water system. Probe Renishaw OMP 60 Cooling by spindle Spindle Cooling Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weig ...
WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...
Spiral mixer DIOSNA, type: SP 24 -refurbished- - everything renewed - Kneader suitable for up to 24 kg of dough - with timer - 2 speeds -mobile -El. Connection: 380 V, 3ph, 50 Hz, 6 A - Condition: Very good, ready for immediate use - incl. 6 months warranty Inspection and test run are of course possible by arrangement.
Kneading Machine Spiral Kneading Dough Machine Model: Spiralo 120 A sophisticated technology ... already proven many times over! LED control with program control 2 speeds + 1x boiler counter-rotation, 3 timers Doughs from 9 to 120 kg / 6-80 kg flour Flour dust hood with protective circuit Stainless steel boiler and spiral Floor-standing machine with base plate 1 extendable tank car DGUV V3 tested Connection 400V, 9.75 kW, 32A-CEE plug Dimensions: 800 x 1650 x 1340/1850 mm, WxDxH TOP quality and price in one machine! New machine with 24 months warranty + service package Option: Additional tank car 120 Soft starter Maintenance contract We have a wide range of spiral mixers in stock!
Used spiral mixer DIOSNA, type: SP 24 F -in very good condition- - Kneader suitable for up to 24 kg of dough - with digital control -mobile -El. Connection: 400 V, 3ph, 50 Hz, 5 A, 2.2 kW - Condition: Very good, ready for immediate use Inspection and test run are of course possible by arrangement.
maximum number of results exceeded
please refine your search
