mills machines used for sale

Capacity up to 250 kg/h Melting container capacity 35 kg stainless steel with casting device with vibration table Connection 8.2 kVA Electrical heating resistance 4.5 kW with cooling compressor, coolant R134a Cooling capacity 7.5 kW with touchscreen operation with 1 year warranty, operating errors excluded

Code 8529 Description CNC Bed milling machine Make Zayer Type 2200 BF 3 Machine nmb 52248 Year 1986 Control Fagor 8020 Table size 2200 x 800 mm Movement table (X) 1830 mm Cross traverse ram (Y) 1016 mm Vertical traverse milling head (Z) 1016 mm Spindle taper ISO 50 Max. Weight on table 4000 kg No. of spindle speeds 18 steps Spindle speeds 28 – 1800 rpm Feeds dir. Progr. X-Y-Z 3 – 5000 mm/min Rapids Longitudinal 5 m/min Cross 5 m/min Vertical 5 m/min Total Weight 10.000 kg Mainmotor 11 kW Power connection 38 KVA Voltage 380 Volt Accessories Milling head Horiz./Vert. with ISO-50 Hydr. tool clamping device Condition Machine is in good condition

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

Code 81176 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 3000 S/N 30 – S / 80 Year 1995 Control Heidenhain Manual Plus ( 1998 ) Distance between centers 3000 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 6000 kg Accessories 3 chuck of 315 mm 1 fixed steady 1 open steady cooling equipment Condition Machine is in good condition

Max Bending Length 2250mm Machine is in excellent condition - As New LOW HOURS

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

2K52-1 radial drilling machine was built in the 80s in the USSR. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as drilling, reaming, countersinking and threading in workpieces of various sizes. All these machining processes are performed by means of a reliable, tiltable spindle with an optimised speed range. This solution enables the machining of workpieces at different angles, without the need for repositioning them. The work head with spindle moves along the arm, enabling precise setting of the drilling point. The arm, in turn, moves vertically and horizontally along the rotating column, providing great flexibility during operation. The machine column rotates around its own axis, allowing the arm to be repositioned relative to the base. The 2K52 radial drilling machine is also equipped with, among others, a work tab ...

Code 0733 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 4 MA S/N 2204-1372 Year 1987 Control Grundig - Contour 2 Table 800 x 460 mm Longitude ( X – axis ) table 485 mm Vertical ( Y – axis ) table 380 mm Cross ( Z – axis ) spindle 385 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 63 - 3150 rpm Feeds X-Y-Z 2 - 3000 mm/min Rapides 3 m/min Spindle motor 3,7 / 4,4 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 1810 DESCRIPTION CNC Universal milling machine Make TOS Model FNG 63 CNC S/N 16663 Year 1991 Control Heidenhain TNC 355 Table 1120 x 630 mm Longitude ( X – axis ) table 800 mm Vertical ( Y – axis ) table 500 mm Cross ( Z – axis ) spindle 630 mm Spindle movement ( H/V ) 100 mm Spindle taper 40 ISO Speeds 20 - 4000 rpm Feeds X-Y-Z 1 – 7500 mm/min Rapides 7,5 m/min Spindle motor 11 kW – 380 Volts Accessories Table 1120 x 630 mm Coolant Condition Machine is in normal condition

Sliding Table Saw Milling Machine Planing Machine Slotted Hole Drilling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: BF6-31 YOC 1990 Format sliding carriage 1.6 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Boom table Miter stop Motor power main motor 3 KW Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 3 KW Milling fence with fine adjustment Dressing thickness planing machine Planing width 31  ...

Code 1815 DESCRIPTION CNC Universal toolroom milling machine Make DECKEL Model FP 3 A S/N 2206-0593 Year 1980 Control Grundig 2102 ( position ) Table 800 x 460 mm Longitude ( X – axis ) table 500 mm Vertical ( Y – axis ) table 400 mm Cross ( Z – axis ) spindle 300 mm Spindle quill 80 mm Spindle taper 40 ISO Speeds 25 - 2500 rpm Feeds X-Y-Z 1 – 500 mm/min Rapides 1,5 m/min Spindle motor 2,0 / 4,0 kW – 380 Volts Accessories Table 800 x 460 mm Coolant Condition Machine is in good condition

Code 4946 DESCRIPTION CNC Milling machine Make ABENE Model VHF – 3 TNC Serial No. 30038 Year 1984 Control Heidenhain TNC 150 B Table 1200 x 320 mm Longitude ( X – axis ) table 670 mm Vertical ( Y – axis ) table 450 mm Cross ( Z – axis ) table 250 mm Spindle gap 250 mm Spindle taper 40 ISO Speeds in 12 ranges 44 - 2000 rpm Feeds X-Y-Z 1 - 3000 mm/min Rapides 3,0 – 1,5 m/min Spindle motor 4,5 kW - 380 Volts Weight of machine 1600 kgs Accessories Univ. millinghead 3 x DRO Heidenhain Coolant, etc. Condition Machine is in very good condition

Code 61044 Description Toolroom millingmachine Make MACMON Type M 100 E Serial no. 1176 Year 1984 Table size 600 x 215 mm Longitude traverse table (X) 310 mm Cross traverse millinghead (Y) 170 mm Vertical traverse milling head (Z) 340 mm Spindle taper 40 ISO 16 Spindle speeds: H / V 40 - 2000 rpm 16 Feeds: longitude and vertical 9 - 450 mm/min Spindle motor 1,3 and 1,8 kW - 380 Volts Dimension L x W x H 1,1 x 1,1 x 1,4 meter Weight 750 kg Accessories Universal millinghead with quill of 70 mm Coolant Condition Machine is in good condition

Code 8520 DESCRIPTION CNC bed milling machine Make DECKEL Model FP 42 A S/N 2388 – 0155 Year 1981 Control Grundig 2301 Table 1380 x550 mm Longitude ( X – axis ) table 1170 mm Vertical ( Y – axis ) table 370 mm Cross ( Z – axis ) spindle 370 mm Spindle taper 40 ISO 21 Speeds 10 - 2000 rpm 21 Feeds X-Y-Z 1 - 2500 mm/min Spindle motor 3,7 / 4,4 kW – 380 Volts Weight 3000 kgs Accessories Coolant Condition Machine is in good condition

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

specifications: - Saw blade diameter up to 400 mm - Cutting range at saw blade diameter 400 mm - at 90° around 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pcs Pneum. Material clamping sticks with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Code 111256 Description Hydraulic vertical Keyseatingmachine Make FRÖMAG Model RAPIDA D 63/425 Serial no: AKK 87370 ASK 1660 Year 1979 Capacity : 3 – 63 mm Stroke length: max. 445 mm Speed: 2 – 22 m/min max. weight on table: 30.000 kg Tabel size 685 x 455 mm Accessories Autom. Cycle Very much tooling Condition Good

Key data: 690 mm, 2255 mm, 2500 1/min

Basic machine data Used CNC Lathe from SMEC (SAMSUNG) Make: SMEC (SAMSUNG) Type: PL 45LY Year of Make: 2014 Condition: Mint Control: Name: FANUC OI-TD FANUC Manual Guide (dialog program) Travels: x-travel: 350 mm // y-travel: +/- 60 mm (120 mm) // z-travel: 2250 mm Technical data: • C-axis • Max. speed: 2500 rpm • Swing diameter over bed: 775 mm • Max. turning diameter: 690 mm • Max. turning length: 2255 mm • Hydraulic 3-jaw chuck: 450 mm • Rapid traverse: x = 20 m // z = 18 m • 12 tool positions • BMT75 interface • Bar passage: 118 mm • Hydraulic tailstock (programmable) • Hydraulic bezel SMW 30-245 mm • High-pressure coolant pump up to 30 bar • Chip conveyor • Man. Tool Measurement Arm • Signal light • Tool package included with machine Incl. 4 driven tools 2 x Axial 2 x Radial The machine is in mint con ...

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Key data: 1150 mm, 900 mm, 600 1/min

Basic machine data Used CNC lathe from HWACHEON Make: HWACHEON Type: VT 1150 M Year of Make: 2008 Condition: Very good Control: Name: FANUC 0iTC Travels: x-travel: 610 mm // z-travel: 950 mm Technical data: • Spindle: 600 rpm • 3-jaw chuck ⌀ 1270 mm • Turning diameter: 1150 mm • Turning length: 900 mm • 12-station turret • BMT 85 tool holder • Tool drive: 3000 rpm • Rapid traverse: x = 24 m/min y = 20 m/min • Tool magazine: 12 stations (Capto C8) • Chip conveyor • IKZ (internal coolant supply) • Machine is sold with complete tool package The machine is in a very good condition – hardly used. Machine has only 3269 PGM hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Packaging machine BVM Compacta Trend; good condition; is cleaned and checked before delivery; Welding0 width 500mm; Passage height 220mm; treadmill finger conveyor belt 1600mm; SC 4530 shrink tunnel with plastic link belt; Discharge belt 1000mm. Side sealing machine BVM Compacta Trend; good condition; will be cleaned and checked before shipping; sealing width 500mm; hight 220mm; infeed conveyor with fingers 160mm; shrink tunnel SC 4530 with plastic belt; outfeed conveyor 1000mm.

Emco F3 - Milling Machine - Vise - Workplace lighting - Coolant device - Tools & Machine Feet Technical data Working Range: - Slide path longitudinal: 300 mm - Slide path transverse: 200 mm - Vertical slide path: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Vertical milling head swivel: ± 90 ° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Groove spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: Pull-out screw M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slides: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (infinitely variable) - Rapid traverse: 1200 mm/min Coolant Facility: - Tank capacity: 30 l - Flow rate: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% ED) - Speed: 1400 / 2800 rpm Dimensions: - Dimensio ...

Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Auction-ID: A7-45702-12

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

RGA Pacific 500

Code 6398 Umschreibung CNC Bahngesteuerte Drei-Koordinaten Messmaschine Fabrikat DEA Typ IOTA 1102 Maschine Nummer 514 Baujahr 1989 Steuerung DEA CU / 01 Tischabmessung L x H x B 1800 x 1000 x 700 mm Längs X = 915 mm Quer Y = 610 mm Vertikal Z = 610 mm Nutzbare Messvolumen 0.34 m3 Gewicht 2050 kg Bemerkungen Maschine hat KEINE Messkopf ( wie Renishaw ) Maschine ist ohne Computer

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 121P3-20-FSH Refrigeration Machines, MTA S.p.A. TAEevo Tech 121P3-20-FSH are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 255 ltr., built-in P3 circulation pump, electric frost protection and a condenser pressure control (winter package -20°C). Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 35 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 5.96 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 19 Max. Current (A) 33 Starting Current Circuit (A) 165 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm)  ...

Code 8499 Omschrijving Projektor Fabrikaat Hilger Type TT 288.311 Serienummer 55211 Vergrotingen 10x, 15x, 25x, 50x en 100x

Large Format 3000 x 1500mm With Automation Siemens 840

5 axis CNC – portal profile machining center for all materials - aluminum - steel - stainless steel - plastics - non-ferrous metals. Drilling + tapping, flow drilling, milling + thread milling, as well as sawing at free angles – for example, steel profile saws up to 6 mm wall thickness Largest saw blade diameter 500 mm Largest machining length 7,000 mm Largest workpiece cross-section 650 x H 300 mm Working range in five-axis operation 6,400 mm x 480 x H 300 mm Spindle drive power 17 kW at 100% ED Milling spindle speeds up to 24,000 rpm Moving tool magazine for 12 tools Tool holder HSK 63 Rapid speeds up to 100 m/min / acceleration 2.5 G Space requirement (including control cabinet and control panel) approx. 9 m x 2.5 m x H 2.6 m Weight approx. 5,000 kg. equipment: - OSAI® CNC control - YASKAWA® feed drives and feed controllers - HITECO® milling spindle wit ...

Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive power  ...

PLASTIC BAGS MAKING MACHINE VAMA VC 600 Germany made in 2015. Technical data Manufacturer: VAMA GmbH Model: VC 600 Production year: 2015 Technical parameters The width of the film maximum: 600 mm The maximum length of the bag: 1200 mm Film thickness: 25-80 μm weld Capacity: 60 - 90 bags per minute Rolling rollers 2 with roll diameter: 700 mm Stacking position: 25-50 pieces Machine for the production of plastic bags Excellent condition, located in Poland

AVIA VMC 650 - Vertical Machining Center Recording: ISO 40 X/Y/Z: 650 / 540 / 620 mm The AVIA VMC 650 vertical machining center has been specially developed for the production of small to medium quantities. With a maximum workpiece weight of 700 kg, even heavier parts can be machined without any problems. The high rapid traverse speeds of 25 m/min in the X, Y and Z axes ensure high efficiency of the machine. With a spindle speed of 10000 rpm, a very good surface is guaranteed for a wide variety of materials. - Heidenhain iTNC 530 HSCI CNC control - Tool changer with 24 positions - Chip screw conveyor - Year of construction 2012 Technical data Table: - Table size: 800 x 540 mm - T-slots (size/spacing/number): 18 mm / 100 mm / 5 - Max. workpiece weight: 700 kg Spindle: - Type: Cartridge - Tool holder: ISO 40 according to PN-92/M-55085/01 (DIN 69871A) - Tightening  ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation - automatic CNC – controlled double-sided pre-bending - Conical bending device - three hydraulically driven rollers (one hydraulic motor per roller) - hydraulic linear under-roll adjustment - hard chrome-plated piston rods - hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics - Central lubrication system

Very high-quality CNC – controlled precision sheet metal round bending machine with automatic bending sequence calculation – automatic CNC – controlled double-sided pre-bending – conical bending device, three hydraulically driven rollers (one hydraulic motor per roll), hydraulic linear sub-roll adjustment – hard chrome-plated piston rods – hardened and ground rollers - PILZ® laser protection - BECKHOFF® CNC – control with Ethernet technology and large touch screen - DANFOSS® precision hydraulics – central lubrication system Maximum bending length 2,000 mm Roll diameter 170 mm Smallest weft diameter = 1.1 x the roll diameter The rollers run in bronze plain bearings. Nominal pre-bending performance over the entire bending length at 5 x D = 5 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 7 mm sheet steel/ST40 Drive  ...

GER RS-12/50 surface grinding machine. Grinding area: 1200x550mm. Distance table-centre of spindle: 625mm. Table speed: 2 to 25m/min. Maximum table travel: 1250mm. Maximum work weight: 1200Kgs. Maximum cross travel: 500mm. Grinding wheel size: 400x80x127mm. Manual diamond grinder. Vertical orientable headstock. Vertical automatic feed. Power of grinding spindle: 12,5cv. Weight: 4500Kgs.

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer 4JE-13Y-40P -Kaeltepower: 60 kW at -10ºC/40ºC, 26 kW at -25ºC/40ºC -Volume: 3 x 63.5 m3/h -Quantity in stock: 1 piece -Kealtemittel: R134 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman