mills machines used for sale

Key data: 40 mm, 945 mm, 710 mm

MAS radial boring mill, type VR4A Ready to use. flawless operation Technically tested with retrofitted emergency stop switch Specifications: Drilling spindle mount: Mk4 Max drilling capacity 50/60 mm Feed in longitudinal direction drill head (X-axis): 945 mm Height adjustment arm (Y-axis): 710 mm Min spacing stand -- drilling spindle (X): 310 mm Max spacing stand -- Drilling spindle (X): 1255 mm Spindle diameter: 40 mm Max drilling depth: 310 mm Speeds: 40 > 2000 rpm Power on main drive shaft: 3 kW Height: 2240 mm Weight: 2.55t ACCESSORIES: Table/Cube The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.

Manufacturer JUARISTI Model TS 3-MG 12 Year 2009 CNC HEIDENHAIN i TNC-530 Rotary table Type Juaristi MG-12 Table Surface 2.000 x 2.500 mm. T Slots 11 T Slot distance 170 mm. Max weight allowed on table 8.000 kg Table Rotation (B Axis) Continuo – 0,001º Travels Longitudinal travel (Z Axis) 2.475 mm. Axial travel (W Axis) 800 mm. Vertical travel (Y Axis) 2.500 mm. Cross travel (X Axis) 3.000 mm. 5 controlled axes X, Y, Z, W, B, U Main Spindle Quill Diameter 130 mm. Speed 3.000 rpm Main Axis Orientation INCLUDED Taper ISO 50 DIN 69871/1-B Milling head Type INCLUDED Head Power 30 kW Speed Ranges 2 Turning Speeds 0-2.500 rpm Boring head Andrea Chuck model D`ANDREA UT5-800-S Head Ø Ø 800 mm Cross Axis Travel 250 mm. Automatic tool changer ATC Type Horizontal / Vertical ATC Positions 30 Other equipment TS-3 head, TS-5 column and longitudinal bed IN ...

Laboratory bead mill Manufacturer: VMA Getzmann GmbH Type: Dispermat SL-C50 N°: 0819203 Built: 2003 as good as new with ceramic grinding set with control panel additional pump with user manual and documentation LWH: 670 x 700 x 370

Fully refurbished Hosokawa Alpine CW 250 used machine by Alpine Originals. The pin mill Hosokawa Alpine Contraplex CW fitted with two driven contrarotating discs. It is used to grind soft materials, even with high fat or humidity content. It allows also the processing of certain flexible materials or those that can´t lose their properties during comminution in cryogenic mode using liquid nitrogen (LN2) freezing them. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 40 to 500 micrometer (µm) t ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Fully refurbished Hosokawa Alpine UPZ 315 used machine by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulu ...

Colloid mill Manufacturer: Probst & Class Type: N100E N°: 90028 Power: 5.5 kW Engine manufacturer: Loher with operating instructions various spare parts (piping, taps, etc.) LWH: 1150 x 400 x 800 mm

Corundum stone mill Manufacturer: Fryma Type: MMR-O N°: 166 with funnel & outlet Power: 12 hp with various grinding discs LWH: 500 x 500 x 1250 mm

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the  ...

Kolloplex pin mill type 630 Z, Drive : 55 KW Weight : 1100 kg; --> Stifscheiben diameter housing and door side : 630 mm;

Three-roller Manufacturer: Joseph Vögele AG Type: PW 3103 Item #: 713345 Year of construction: 1965 LWH: 550 x 850 x 1200

old, but very good Alpine A 250 B mill, drive: 5.5 Kw., mounted on frame, with motor circuit breaker, ready for use. old, but very nice Alpine A 250 B Mill, motor 5.5 Kw., frame mounted, ready for use

Inv. Num. : 5479 Type: PC W 200 HA Producer: ŠKODA Created: 1987 Parameters: Spindle drive power: 77 kW Minimum spindle speed: 0.8 1/min Maximum spindle speed: 630 1/min Mechanical feed length axis X: 4000 mm Maximum feed speed axis X: 4000 mm/min Maximum feed speed axis Y: 4000 mm/min Maximum feed speed axis Z: 4000 mm/min Cone: ISO 60 Spindle diameter: 200 mm Maximum turning-out depth: 2000 mm Spindle extension: 1600 mm Base size: 6400 x 5100 mm Ride of the stand on the bed: 5000 mm

Processing plant Manufacturer: Koruma Type: Disho Lab-15 Machine no.: 6023 Year of construction: 2000 very good condition with scraper mixer with control cabinet & touch panel Container lid swiveling LWH: 1500 x 900 x 1600 mm

Plastic crusher, industrial shredder, cutting mills Wanner 20/20 E-SS for sale in very good condition. This slow-speed gear grinder is used next to an injection molding machine or in a separate room for grinding angles and middle parts. Due to the low speed, it is also suitable for grinding low-melting elastomers and sensitive engineering plastics. On the rotating rotor there are 6 knives. The crushing capacity of the grinder is approx. 60kg/h. The mill is equipped with a 4 kW engine.

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

UNUSED: Facinghead of a Wotan BF 160 Horizontal borer.

Mixer, hammer mill, crusher, glass crusher, used Manufacturer: EHINGER IMPIANTI Type: MUD 89 Year of construction: 2003 Engine SIEMENS 45 kW 1475 rpm 400/690 V Reduction with V-belt approx. 4,3:1 Total dimensions: approx. 2800 x 1700 x 2000 mm The mill was planned for the simultaneous grinding and separation of materials with different grinders e.B fragile and tough fractions. It was part of a glass recycling plant in which foam glass gravel was produced. We sell the complete plant with belt ovens, cup plants, silos, crushers and mills.

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knife: 3 Rotor blades: 5 Drive: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580mm Rotor diameter: approx. 450mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Hammer mill Mikropul Cologne Type 3SCB Serial number: 610098002 Year of construction: 1979 Electric motor 30 to 75 Kw can be used Height: 1200 mm Width: 1200 mm Depth: 1000 mm Inlet: 170 mm x 170 mm Outlet diameter: approx. 500 mm Roller: 400 mm x 350 mm Changes and errors in the technical data, data and prices as well as intermediate sale reserved.

Ball mill Drum mill Wet grinding body Mill clinked TMNP17/2 with engine and adjustment gearbox used Manufacturer: VEB Type: TMNP 17/2 Year: 1984 Drum length approx. 2010 mm, walled out inside with wear-resistant clinkers Drum Ø ca. 1700 mm Wall thickness approx. 17 mm Drive gear Ø approx. 870 mm x 100 mm Opening approx. Ø 220 mm / 450x450 mm with coaster block gearbox and approx. 15 kW electric motor The substructure can be offered as a steel structure by us Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Shredder | Cutting mill 18/45/ 7.5 kWt VGA for plastic 18/45 VGA Cutting mill for plastics, cable 7.5 KW, 80-140 kg/h. Model: VESPA 18/45 / 7.5 kWt VGA Throughput Kg/h: 80-140 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×225 Stator Knife Quantity/Dimensions Piece x mm: 4×225 Motor kW: 7.5 Weight Kg: 320 Capacity (cable) kg/h: up to 140 Capacity (plastic) kg/h: 80-120 Dimensions (mm) A 860 B-670 C-1480 D 1250 E 460 F 220

VESPA 50/80/45 kW VGA Cutting mill for plastics 45 KW, 500-800 kg/h. Insertion opening mm: 820×650 Rotor diameter mm: 500 Throughput kg/h: 500-800 Rotor blade quantity/mm: 6 x 400 Stator knife quantity/mm: 4 x 400 Engine KW: 45,0 Dimensions LxWxH mm: 2400x1700x3070 Weight kg: 4500 With material conveying blower 7.5 kW and BigBag filling station.

50/80/45 kW VGA Cutting mill for plastics 45 KW, 500-800 kg/h. Insertion opening mm: 820×650 Rotor diameter mm: 500 Throughput kg/h: 500-800 Rotor blade quantity/mm: 6 x 400 Stator knife quantity/mm: 4 x 400 Engine KW: 45,0 Dimensions LxWxH mm: 2400x1700x3070 Weight kg: 4500 With material conveying blower 7.5 kW and BigBag filling station.

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill, assistance mill VESPA 16/22/4 kWt for small parts Model VESPA 16/22 / 4 kWt VGA Throughput Kg/h: 40-60 Rotor diameter мм: 160 Rotor knife quantity/dimensions piece x mm: 6×110 Stator Knife Quantity/Dimensions Piece x mm: 4×110 Motor kW: 4 Weight Kg: 320

Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Model: VESPA 25/40/7.5 VGA Throughput Kg/h: 100-140 Rotor diameter мм: 250 Rotor knife quantity/dimensions piece x mm: 6×200 Stator Knife Quantity/Dimensions Piece x mm: 4×200 Engine kW: 7.5 Weight Kg: 560 Dimensions (mm) A 1115 B 770 C 1800 D 1490 E 410 F 310

50/120/75 VGA Cutting mill VESPA for plastics 75 KW, 700-1100 kg/h. Insertion opening mm: 1220×650 Rotor diameter mm: 500 Throughput kg/h: 700-1100 Rotor blade quantity/mm: 6 x 600 Stator knife number/mm: 4 x 600 Motor KW: 75,0 Dimensions LxWxH mm: 2400x2100x 3070 Weight kg: 6800 options: With material conveying blower 11.0 kW and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

35/40/11 VGA Cutting mill for plastics 35/40 VGA, 11 KW, 120-200kg/h. Insertion opening mm: 420×380 Rotor diameter mm: 350 Throughput kg/h: 120-200 Rotor blade quantity/mm: 6 x 200 Stator knife number/mm: 4 x 200 Motor KW: 11,0 Dimensions mm: 1180x780x1970 Weight kg: 950 options: With material blower 4.0 kW Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

50/100/55 VGA granulator for plastics 55 KW, 700-900 kg/h. Insertion opening mm: 1020×650 Rotor diameter mm: 500 Throughput kg/h: 700-900 Rotor blade quantity/mm: 6 x 400 Strator knife quantity/mm: 4 x 400 Motor KW: 55,0 Dimensions LxWxH mm: 2400x1700x 3070 Weight kg: 4650 With material conveying blower 7.5 kW and BigBag filling station. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc.

For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.

OM Vertical Turnmill TMD-30/40 with 2 x crossrail mounted Vertical rams + C-Axis + Milling spindle New 1990 / Retrofit in 2020 from Fanuc 15T to Siemens 840D Control Siemens 840 D Table diameter 3000 mm Turning diameter 4000 mm Turning height 3000 mm Table load max. 40 ton Distance between table & crossrail max. 3400 mm Ram horizontal travel (X) 2200 mm Ram vertical travel (Z) 2000 mm (right ram),1600 mm (left ram) Crossrail travel 2400 mm Table speed 0.4 ~ 60 rpm Table motor 55 KW Max. torque 10,000 kgM Table index C-Axis 0.001degree Milling spindle speed 3~750 rpm Spindle taper ISO 50 Milling spindle power 18.5 KW Milling feed 1~180 deg/min. Ram section 260 x 260 mm ( right ram ), 250 x 250 mm ( left ram ) Tool shank size 50 x 50 mm Machine dimension (L,W) 14,700 x 10,500 mm Condition said to be very good (please see attached photos).  ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...

Machine : Tools for boring mill / radial drilling machine Type: MK5 5 drill rods φ 40 , 30, .. L- 280 – 400mm 3 extensions MK5 – MK4 , L-400-520mm 1 boring tool Oerlikon MK5, φ 70, 6-260 5 Mandrels MK5 - φ 16, 22, 27,32,40mm 2 Pliers chuck Clarkson 1 MK5 boring tool, adjustable, φ 60mm 2 Shots 2 milling cutters: end mill rough/plain φ 56x100mm, / groove milling cutter 4 milling cutters: 2 rough/plain φ 40x12o, 2 roughing cutters 1 Reduction from MK5 to SK40 Weight: approx. 70kg kg PRICE : € 700,- ex works ! A - T-slot size: approx. 21.5mm, B-35, thread M20 16 T-slot nuts 20 threaded rods M20, L-120 – 400mm 3 x 2 pcs. clamping claws 4 nuts long, 6 nuts, washers 2 blocks for adjustment with adjustment screw 4 blocks 80 x 60 x40mm ( backing )

Corundum disc mill Manufacturer: FrymaKoruma Type: MK-360/B Item #: 101031 Year of construction: 2007 Power: 45 kW Pressure product space: 4/3 bar Pressure double jacket: 6 bar Weight: 670 kg new grinding discs installed with control cabinet with double-acting mechanical seal various spare parts LBH: Mill: 1150 x 650 x 600 mm Control cabinet (large): 1000 x 290 x 1220 mm Control cabinet (small): 400 x 300 x 200 mm

Boring power:10 mm weight:590 kg connected load:2 kW dimensions::1500 x 1300 x 2300 mm

Inlet opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 mm Stator knives: 3 Rotor blades: 3 Drive: 18.50 kW Feed opening: approx. 400 x 400 mm Rotor width: approx. 400 mm Rotor diameter: approx. 400 Stator knives: 3 Rotor knives: 3 Drive: 18.50 kW

BÜHLER Stone Mill MSUA 400 4 kw V-belt drive n=500 rpm Inlet 100 mm diameter Engine rebuildt Bearing: oil exchanged

Corundum disc mill Manufacturer: Fryma Type: MK-95/R No.: 215747 Year of construction: 1987 Power: 3.3 kW in EEx protection new grinding disc, with spare discs with hopper mounted on a mobile wagon LBH: 800 x 600 x 1720 mm

Second hand golfetto hammer mill

Bead Mill Manufacturer: Fryma Type: MS-18 No.: M17118 Year of construction: 1996 Power: 11.43 kW Pressure product space: 2.5 bar Pressure double jacket: 2 bar with double-acting mechanical seal with blocking pressure station Grinding chamber as good as new LBH: 1200 x 800 x 1600 mm

Composed of: - Pin mill, manufacturer : Condux, type CST 150 / F, pin disc diameter : 165 mm; - Dosage - Filters - Container approach --> mill housing in stainless steel;

Hosokawa Powderplex Sifier Mill APP 400 Crushing and sighting Drive power 37 kW Engine speed 3000 1/min Pressure shock resistant up to 10 bar-Ü additional view terrad Very good ready-to-use condition, directly from production!

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.

Granulator Manufacturer: Rapid Type: 1514 Year of construction: 2000 - Device tested, cleaned and ready for use -

Inlet opening: approx. 500 x 700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Drive: 110 kW

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW

Inlet: approx. 400 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blade: 5 x 2 Drive: 55 kW

Inlet: approx. 920 x 1580 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 800 mm Stator knife: 3x2 Stator knife: 9x4 Drive: 160 kW