mills machines used for sale

Drilling Ø in steel/GG 20: 40/55 mm Spindle holder: MK 4 Projection: 345 mm Table size: 450 x 600 mm Distance between table and drill quill: 785 mm Quill stroke: 180 mm Spindle speeds in 4 groups by pole-switching. Engine and manual transmission as well as infinitely variable control: 160 - 1540 rpm 4 automatic feeds: 0.09; 0,12; 0.18 and 0.22 mm/rev Drive motor: 380 V, 2.6/3.2 kW Weight: 640 kg Space requirement: 700 x 1150 x 2000 mm

Drilling Ø: 28/35 mm Spindle holder: MK 3 Projection: 293 mm Table size: 400 x 400 mm Table swivel on round column and height-adjustable via hand crank and rack Large distance between table and drill quill: 630 mm Quill stroke: 180 mm Spindle speeds in 4 groups adjustable: 65 - 1750 rpm Drive motor: 380 V, 0.9/1.5 kW Weight: 340 kg Space requirement: 600 x 920 x 1880 mm

Table support or sanding length: 200 x 400 mm Sanding belt dimensions: 200 x approx. 1500 mm 2 belt speeds due to pole-switchable motor: 8/16 m/s Drive motor: 380 V, 1.8/2.2 kW Weight: 145 kg Space requirement: 1000 x 750 x 1100 mm

Inv. Num. : 9295 Type: XO 87 Producer: Wenzel Created: 2007 Parameters: Axis X: 1500 mm Axis Y: 800 mm Axis Z: 700 mm

AUTOMATIC DIE CUTTER BOBST SP 102 E II -Year 2001 -Size max 72x102 cms, Min size 35x40 cms. -Max speed : 7.500 sh/hour -Max pressure: 250 tons. -Thickness from 80 to 2000 grm/sqm -Non stop feeder and delivery -Center line system -Two frames for stripping and two for die cutting -Micrometric adjustment thin plate system -Double action stripping -Cube control system -In production, any test possible, very nice conditions -Complete with all parts and many accessories, Available immediately

2 high-performance tapping equipment; for more details on the speed see photo of manual Auction-ID: A7-48332-647

x-travel: 720 mm y-travel: 220 mm z-travel: 450 mm table surface area: 1000x310 mm weight of the machine ca.: 1.500 kg dimensions of the machine ca.: 2000x1200x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 220 kN plate thickness: 8 mm sheet width: 3000 mm plate length: 1500 mm workpiece weight: 200 kg total power requirement: 9,5 kW dimensions of the machine ca.: 7395 x 6540 x 2072 mm Features: Punching head: - Hydraulic single-tool holder with 360° rotation - Manually adjustable holding force - Programmable holding mechanism (active/passive/re-tightening) - Spray lubrication for punch - Punch stroke counter - Level monitoring for thread forming and tool lubrication Control System: - Open control system based on Sinumerik 840 D - 12 TFT color display - Teleservice via the Internet - Automatic shutdown Data Transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual-beam photoelectric sensors - Hydraulic emergency shutdown - Warpage detection Programming: - TruTrops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread formi ...

: neu : 2024 : 5546 : prompt, Zwischenverkauf v : Polen : 1730 € : 1 : 150 mm : 2.000 x 150 mm : 200 x 150 x 42 ø mm : 605 mm : 3000 1/min : 3.5 kW : 1025 mm : 600 mm : 1000 mm : 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5500 € : 106.15 € : 2.5 mm : 160 mm : 250 nm : 4 Stk. : 96 mm : 13 1/min : 1475 mm : 550 mm : 1200 mm : 320 kg reduction motor with brake system movement of rolls with foot pedal adjustable idle roll steel shafts with bronze bushings 4 set of rolls complete with stand user manual in GERMAN or ENGLISH according to CE rules ALTERNATIVE (PRICE ON REQUEST): HIBKS 2,5 with hydraulic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Bulgarien : 113620 € : 2147.42 € : 800 mm : 2000 mm : 400 mm : 260 mm : 560 mm : 560 mm : 318 MK : 12 : 8 - 400 1/min : 152 : 0.039 - 15 mm/U : 0.02 - 7.5 mm/U : 76 : 0.5 - 150 mm : 60 - 1/5 Gänge/ : 0.125 - 37.5 : 240 - 4/5 : 410 mm : 150 mm : 105 mm : 6 MK : 225 mm : 11 kW : 6000 kg Their main purpose is to process pipes. Accordingly, this type of machines is widely used in the oil industry. Oil country lathes have large capabilities of processing inner and outer cylindrical and conical threads on pipes with large diameters. The clamping of the pipes with two universals and stands allows the processing of long pipes. These lathes are suitable for producing elements and equipment for the oil industry, as well as for maintaining such facilities. Drive via gearbox Electrodynamic brake 3-axis digital display Fagor Quick-change tool holder Amestra ty ...

: neu : 2025 : 090120 : prompt, Zwischenverkauf v : Türkei : 7500 € : 144.75 € : 1 : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9656 : prompt, Zwischenverkauf v : Türkei : 2600 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 209800 € : 3371.76 € : 20 to : 2000x1250 mm : 2000 mm : 1250 mm : 90 m/Min : 70 m/Min : 114 m/Min : 1100 1/Min : 375 1/Min : 1200 1/Min : 6 mm : 3 mm : 3 mm : 1.5 mm : 27 : 0,1 mm : 0,05 mm : 30 U/Min : 150 U/Min : 100 kg : 940 mm : 6 bar : 88.9 mm : 7.5 kW : 5600 mm : 6600 mm : 4200 mm : 6200 mm : 2310 mm : 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index ...

: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 269.18 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12570 € : 241.34 € : 50 mm : MK 4 : 350 mm : 93 - 152 - 204 - 298 - 44 U/min : 3 kW : M35 : 480 mm : 755 mm : 2265 mm : 435 kg : 0,1 / 0,18 / 0,24 mm/U : 180 mm : 150 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Gear drive 3 aut. feeds sliding machine table solid drill head tiltable turntable front wheel for sensitive fine feed (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment L coolant equipment and machine base with T-slots ERB Reverse for tapping IR/RS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 160788 € : 3038.89 € : 3 kW : - : 12 mm : 6 mm : 6 mm : 3 mm : 6 mm : 26,5 kW : 250 mm : 16 mm : 160 x 160 mm : 200 x 150 mm : 6000 mm : 58 kg/m : +/- 0,2 mm : +/- 0,05 mm : rund, quadratisch, rechte : 40 m/min : 94 m/min : 30 m/min : 510 °/s The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC graphic control with touchscreen - Laser source Brilase 3 kW Premium incl. chiller - Cutting head with automatic focus adjustment - manual loading -manual unloading table 3 m - Positioning laser - Central lubrication - slug car - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Suction unit with filters Semi-automatic loading system Manual unloading table 6 m with conveyer Durma cloud license Lasersources with 4 or 6 kW on request The data for this ad was cr ...

: neu : 2025 : 030138 : prompt, Zwischenverkauf v : Deutschland : 3444.77 € : 1 : 13 mm : MK 2 : 220 mm : 40 - 4000 U/min : M 10 (steigungsabhängig) : 520 mm : 400 mm : 850 mm : 62 kg : 60 mm : 85 - 370 mm : 420 mm : 300 x 250 mm : 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) ALTERNATIVE: Version with B16 spindle (Art. no.212500) The dat ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1055 € : 12 mm : 19 mm Weldon : 1.1 kW : 400 mm : 126 mm : 185 mm : 10 kg : 12 mm : 40 mm : 40 mm : 45 mm : 370 U/min : 6 mm PRO-40 AD is a low profile mag drill, that fits in the tightest of spots. Perfect solution for any applications in confined spaces, wheretypical mag drills are too large. Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep. An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces. Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces, preventing the motor from engaging if the adhesive force is dangerously low. PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) ...

: neu : ca. 2 Wochen ab Auftragse : 257.02 € : 80 mm : 28 mm : 120 mm : 12 kg [felix] 2.0 Easy and safe drilling operations - Thanks to the innovative machine vice by Felix Röwekamper. The machine vice for freely adjustable clamping of the workpiece. Simple, fast, secure and superior in use. With two hand movements the vice is clamped on the drilling machine table, precisely and safely adjusted. Prism jaws with shoulder and horizontal and vertical holding recesses to clamp a wide range of workpieces Hardened and precision ground clamping jaws No additional clamping devices necessary The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2025 : 090069 : prompt, Zwischenverkauf v : Türkei : 840 € : 1 : 0.8 mm : 80 mm : 110 nm : 7 Stk. : 52 mm : 380 mm : 180 mm : 380 mm : 30 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 20 mm : 20 mm : 12 mm : 15 mm : 13 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear ...

: neu : 2023 : 9684 : prompt, Zwischenverkauf v : Türkei : 970 € : 1 : 1.2 mm : 100 mm : 140 nm : 7 Stk. : 62 mm : 560 mm : 220 mm : 500 mm : 50 kg 7 tool sets users manual in ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 197430 € : 3731.43 € : 1010 mm : 590 mm : 1000 x 400 mm : 1000 x 400 mm : 0 -25 m/min : 0 - 4000 mm/min : 0,001 mm : 450 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3675 mm : 4055 mm : 2480 mm : 6500 kg : 423 kg : 670 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 5.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with preci ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 32480 € : 620.37 € : 1550 mm : 9 mm : 9 mm : 7 mm : 7 mm : 5 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3250 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT (PRICES ON REQUEST): infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened roll ...

: gebraucht : 2010 : 080065 : prompt, Zwischenverkauf v : Deutschland : 29800 € : 1 : 2040 mm : 3 mm : 2 mm : 4.5 mm : Motorisch : 1.5 kW : 1.1 kW : 3060 mm : 1650 mm : 1500 mm : 2730 kg : 750 mm : 140 mm : 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5", color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R ...

: gebraucht : 2003 : 4544 : prompt, Zwischenverkauf v : Spanien : 13800 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1500 mm : 1350 mm : 1850 mm : 950 kg : 1,5 kW with 3-axis digital display Fabr.Fagor Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-m ...

: neu : ca. 2 - 4 Wochen ab Auftr : Deutschland : 1781.01 € : 10 mm : B 16 : 180 mm : 250 - 3000 U/min : 0,45 kW : 400 mm : 248 mm : 460 mm : 30 kg : 50 mm : 105 - 245 mm : 300 x 200 mm : 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice &, keyless chuck) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 € : 402.43 € : 40 to : 250 mm : 200 x 20 mm : 1100 x 620 mm : 55 mm : 4,7 - 9,1 mm/s : 45 mm/s : 45 l : 3 kW : 950 mm : 1250 mm : 900 mm : 1000 mm : 750 kg 2 holder pins, height 110 mm (higher ones on request) Manual stop 500 mm with millimeter scale Adjustable speed 2 handwheels for adjusting the stroke and retraction point Precise hydraulic stroke adjustment, even under pressure Two-hand operation Huge range of tools, prices on request ALTERNATIVE: Version with CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Italien : 2000 mm : 6 mm : 6 mm : 4 mm : 5 mm : 4.5 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...

thread dia.: / mm threading length: / mm thread pitch: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece height max.: 100 mm workpiece width - max.: 1300 mm bending speed: 0,4 - 2,6 m/min number of spindles: 6 Stk Spindle length: 6 x 350 mm total power requirement: 7,5 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,07 x 2,3 x 2,21 m Includes a recirculating conveyor system for workpiece carriers and an exhaust system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Labeler Manufacturer BBK Type ESB 1207-1832 Suitable for self-adhesive labels The machine is used exclusively for applying lid labels to vials. Documentation available

Honing range: 1.9 - 100 mm Spindle speeds infinitely variable in 2 groups: 95 - 3500 rpm Drive motor, gear motor: 380 V, approx. 0.55 kW Working height: 1000 mm Space requirement: 1150 x 800 x 1250 mm Weight approx.: 260 kg

Exist. from: 2 industrial robots Fabr.: Fanuc, type: R-2000iB/2000iC/165L, each with welding head and wire feeder unit Fabr.: Fronius, integrated into closed welding booth Fabr.: Heuen Mechanization-Automation robot technology, with workpiece clamping devices, roller conveyor, linear axis and automatic positioning device for long parts, including control, safety housing, Note: Machine can be loaded against assumption of costs! Costs: approx. 600,00 € Item number: 042273

S/N: 040129, Year of construction: 1993, Max. cutting force: 220 kN, Mains connection: 380 V / 50 Hz, Connected load: 17 kVA, Control voltage: 24 V, Compressed air connection: 6 bar, Machine weight: approx. 11,050 kg, including extensive stock of punching tools, dies, hold-downs and accessories, stored in tool cabinet, Note: Machine can be loaded against assumption of costs! Costs: approx. 500,00 € Item number: 042271

Fully automatic slicer Bizerba A404 FB, Year of manufacture 2010, with discharge belt, good used condition, fully functional

Fabr.-No.: 32642, Version: SABO Standard 40, Connected load: 4.2 kW, Nominal voltage: 380 V, Control voltage: 220 V, Speed range: 63–1,000 rpm, Feed range: 0.20–1.60 mm/rev, Height-adjustable work table, Note: Machine can be loaded against assumption of costs! Costs: approx. 150,00 € Item number: 042267

KAUTEX KB 150 Blow Molding Machine Year: 1981 Max. blow volume (dm³): 220 L Clamping force: 70 t Screw diameter (mm): 120/20 mm Hourly output (kg/h) (with PE): 420 kg/h Accumulator head volume (dm³): 20 L Approx. shot weight (kg): 15.2 kg Min. die diameter (mm): 100 mm Max. die diameter (mm): 350 mm Platen dimensions H x W (mm): 1200 x 1200 mm Max. platen opening (mm): 1500 mm Min. platen opening (mm): 700 mm Longitudinal head offset: 0 to +200 mm Transverse head offset: ± 10 mm False platens (mm): 150 x 2 mm Mold opening stroke (mm): 2 x 400 mm Dimensions (L x W x H): 9200 x 6000 x 5200 mm Max. tooling weight (kg): 3000 kg Max. blow pressure: 7 bar Max. hydraulic auxiliary pressure: 200 bar Number and type of hydraulic auxiliaries: 2 (5/3) Number of pneumatic auxiliaries: 2 (3/2) Unscrewing: Yes, 2 (VB2 carriage)

Consisting of: 1 belt reel, 1 straightening and feeding system, Manufacturer: H. Schleicher, Type: RMSV6-127/160, Year: 1982, Strip width: 650 mm, Strip thickness: 2–5.5 mm, 1 Eccentric press, Factory: VEB Pressen- und Scherenbau Erfurt, Type: PEE (I) 250/400, Masch.-Nr. 34859, Year of manufacture: 1977, Press force: 250 t, Stroke: 36–126 mm, Stroke rate: 40 /min, Slide adjustment: 110 mm, Note: Machine can be loaded against assumption of costs! Costs: approx. 500,00 € Item number: 042263

Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stroke between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Pneumatic material feed via foot switch Weight: approx. 280 kg

Key data: 350 kN

Krauss Maffei 35-55 CX - 35T Year: 2005

We sell a very manoeuvrable, wheeled Multivac R 81 packaging machine for packaging sausages, cold cuts, minced meat or sliced meat. The length is about 4.50m, width and height about 1.2m. The weight is approx. 1.5 tonnes. On the machine we process the above-mentioned products with a capacity of up to 350kg/h. If necessary, there are several tools. New price currently about 140k€.

Key data: 3200 kN

HAITIAN Mars II S eco - 3200/1700 Clamping force: 320 t Opening stroke: 640 mm Tie-bar spacing: 680 x 680 mm Mold thickness (min./max.): 250 – 680 mm Ejection stroke: 160 mm Screw diameter: 70 mm Screw L/D ratio: 18.6 Injection pressure: 1570 bar Injection volume: 1078 cm³ Net weight : 13.2 t Dimensions (L x W x H): 7.61 x 1.74 x 2.54 m

Code: 0197 Brand: CASADEI INDUSTRIA Model: K 30/10 HF - CE Standard Automatic edge bander for straight panels, with glue tank for wood, veneer, pvc, melamine, abs and various - CE Standard Technical data Automatic belt conveyor for panel feed - Speed 7 mt/min Panel height mm 10/45 Edge thickness up to 3 mm Gluing unit: Glue tank capacity kg 1,2 - Electronic temperature control Front and rear pneumatic end cutting unit with circular Vidia blades - Micrometric cutting depth adjustment -End cutting speed 9000 rpm - End cutting blade diameter 80 mm Upper and lower end trimming unit - Vidia cutters diameter 80 - Possibility of combined radius/chamfer cutters - End Trimming speed 9000 rpm Total power Kw 2,2 N° 3 suction ports diameter 60 mm Panel support roller conveyor Overall dimensions mm 2150 x 800 x 1200 h Weight kg 405

- Max. turning diameter: 160 mm - Max. rod diameter: 65 mm - 2x Grooving slides, flat path 70 mm - 2x cross slides, flat path 70 mm - 8-speed turret, non-powered - Max. speed main spindle: 7,500 1/min - Chip conveyors Accessories - Bar feeder IEMCA TAL 65/32 Dimensions LxWxH: - Machine with chip conveyor 4200 x 1385 x 1800 mm - Bar feeder 4000 x 800 x 1400 mm Total weight: 6,500 kg

Used Make up Line Rheon Condition: Used, fully operational / in working condition Location: Ukraine For more detailed information, photos, or videos, please feel free to call or message us directly.

Workshop bench with various SK 40 and various tool contents Auction-ID: A7-48410-873

Taper size: SK 30; Equipped with schunk NSE 138 pneumatic clamp Auction-ID: A1-48232-70

Thanks to the hydraulic spring and the multi-measuring chamber, the IMPERATOR CT II is the optimal combination of dough protection and weight accuracy. Removable components such as discharge belt, volumetric flask and flour shaker simplify cleaning. Rscm I Rltezibdyezjw We used the machine for breads 500 grams and 1,000 grams (dry weight) The machine can be tested on site. Sale ex location EXW : DE 75015 Bretten (near Karlsruhe)