mills machines used for sale

Width 82 cm Year of construction 2015 Round Stack Feeder RFH-82 1st station: Knife shaft station SSP 82 2nd station: 6 fold pockets 82 cm Folding rollers Extra-Grip Automatic folding pocket adjustment Automatic folding roller adjustment Dual current device Standing sheet delivery SBP 86 Fully overhauled and workshop tested Machine condition: cleaned Delivery date: immediately

Width 52 cm Year of construction: 2011 Round stack feeder Extended infeed table 1st station: 10 fold pockets Roller diameter 46 mm Double downstream knife shaft 2nd station: 4 fold pockets 52 cm Roller diameter 40 mm Double downstream knife shaft Downstream knife shaft Counting device MC-Control Shed Extension ASP 66-2 ME new suction wheel, new infeed belt, new folding rollers, workshop tested Machine condition: cleaned and checked Delivery date: immediately from stock

Key data: 254 mm, 500 mm, 3600 1/min

Stock number: 3967 CNC LATHE Manufacturer: HYUNDAI, Type: HIT 18S Machines NO.: 34156066, Year of manufacture: 1998 Specifications: Max. circulation diameter 254 mm dia. Turning length 500 mm Main motor power 15 kw Main spindle speed range 3600 rpm Spindle bore 75 mm dia. X axis movement 180 mm Z ash movement 510 mm Tool turret 1 with 8 stations Control Siemens 840C Fabr. Controlled in X-Z axes Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg

Gr. working width: 1020 mm for sheet metal (at 40 kg strength) up to: 2 mm kl. Tail width: 10 x s kl. Inner radius: 1.5 - 2 x s Upper beam opening width: 190 mm Highest working point of the upper beam: 120 mm Lower beam positionability: 60 mm kl. Box profile (WxH): 165 x 125 mm Space requirement (WxD): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Banderolierer BandAll BA 64-35/30; serviced and inspected by BandAll after-sales service; Frame 640x350mm; Belt width 30mm; suitable for paper or foil; Compressed air required. Banding machine BandAll BA 64-35/30; tested and checked by the support of BandAll ; frame 640x350mm; band width 30mm; used for paper or foil; compressed air needed.

Continuous blasting machine Raga CH12X18, S/N 284, built in 2000, with blasting chamber, 3 blasting chamber blowers, extraction, carousel system for Christmas tree hangers

Blasting machine Wheelabrator (Czech Republic) HW12-16, year of construction 2021, fir tree plant, interchangeable system

The machine is in good technical condition, testing is possible by prior arrangement.

Fully automatic double blasting machine Rösler, automated by industrial robots, blasting chambers each with 2 blowers, each with 2 loading and unloading boxes, built in 2011, incl. wet separator (not visible in the photos)

The machine is in good technical condition, testing possible after prior agreement. Swing diameter over bed: 630 mm, max. turning diameter: 350 mm, max. turning length: 870 mm, spindle passage 52 mm.

used spiral mixer Oase SPK 75, good condition, checked and tested, runs perfectly, for 75 kg flour, with 2 clocks, stainless steel kettle, stainless steel spiral, with new lid, motor newly stored, 6.6 kW, machine no. 910707

: neu : 2024 : 9738 : prompt, Zwischenverkauf v : Türkei : 20300 € : 389.76 € : 1 : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 200 mm y-travel: 200 mm z-travel: 400 mm Control: Siemens 840 D total power requirement: 84 kW weight of the machine ca.: 19 t dimensions of the machine ca.: 7,9 x 6 x 2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mosca RO-MP-K Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding With automatic release With packet height detection (photocells) Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Chiller - Eurochiller GCA9 / Very good technical condition Cooling capacity 13.3 kW Refrigerant R407C The device has: - Compressor - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 1 The device after maintenance, fully functional 3-month operation warranty in Poland

EDM machine Mitsubishi FA20 The rear door seal needs to be replaced A complete service must be done after relocating the machine, adjusting axes According to the Mitsubishi Service Center, costs approx. 2,500 €

Chiller - MTA TAE EVO 161 Cooling capacity 55 kW Refrigerant R410A The device has: - Compressor x 2 - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 2 The device after maintenance, fully functional 3-month operation warranty in Poland

Lathe Hurco TM8i no defects , energized

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

For particularly high PVC or aluminium profiles Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed weight: approx. 300 kg

Key data: 3 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Stepless speed adjustment via handwheel Clockwise and counterclockwise rotation Hydraulic infeed via foot switch Weight: approx. 550 kg Other tools on request

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Manufacturer: KEMPER Drives/motors: HEW Herford + ABM Greiffenberger Main Engine Type: RR 160L/84 S Country of manufacture: West Germany (Germany) — a machine probably from the 80s/90s. Type: spiral bakery kneader with fixed bowl Controls: 2 speeds Automatic cycle Timer emergency STOP

Single Head Corner Welding Machine

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Rotox Water Slot Mill

Inv. Num. : 6826 Type: TruLaser 3030 Producer: Trumpf Created: 2010, GO 2020 Parameters: Laser ON: 74680 Beam ON: 29226 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Source: TruFlow 6000 Equipment: Cooling Suction

Inv. Num. : 9144 Type: Bylaser 4400 Producer: Bystronic Created: 2010 Parameters: Laser power: 4.4 kW Work table length: 4000 mm Work table width: 2000 mm Maximum table load (uniform): 1760 kg Maximum sheet metal cutting thickness (steel): 20 mm Number of tables: 2 Equipment: Impulse cutting Donaldson 5.5 kW Suction

Key data: 320 mm, 305 mm, 5000 1/min

FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder

Key data: 2000 mm, 360 , 55

- Top condition - 570 C 2000-800 - YOC 2007 - 55 Snail - 2 Core moves - GID interface - Only sealed in January, the SGM is completely dry.

KRONES Contiform 312 – PET Blow Moulding Machine (Year 2019) High-performance PET blow moulding machine designed for efficient production of PET bottles for beverage applications. The KRONES Contiform 312 features advanced 3rd generation blow moulding technology, combining high production capacity, energy-efficient infrared heating, and servo-driven stretching for precise bottle quality. The machine is currently still under power and available for inspection. General Information Manufacturer: KRONES Model: Contiform 312 Year of Manufacture: 2019 Condition: Still under power Documentation: Manuals available Technical Specifications Production Capacity: 24,000 bottles per hour Blow Moulding Cavities: 12 Bottle Neck Finish: 38 mm Conversion to 28 mm neck finish possible by buyer Bottle Formats / SKU Volumes: 235 ml 780 ml Operating Data Working Hours: approx. 5,300 ...

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)

Oxy-fuel cnc cutting machine. Prestine condition.

Rebord (Samed) Darix 46/100 semiautomatic casemaker year 2015 Size max. 46 x 100cm hot melt gluing weight 800 kg good condition

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Rebord (Samed) Darix Evolution Pos semi automatic casemaker year 2017 automatic board feeder Size max. 46 x 90 cm hot melt gluing Weight 1.600 kg good condition

Manufacturer: LAIP Model: 198-HT Type: High Temperature Yarn Dyeing Machine Year of manufacture: 2008 Condition: Used, was working before dismantling TECHNICAL SPECIFICATIONS - Package diameter range: 1760 to 3000 mm - 2 sets of carriers, each set with 2 carriers - Spindles for 21 cm diameter packages - 64 bobbins per level - Total PES dyeing capacity: 1,300 kg - Control system: 777 Setex controller - Designed for synthetic yarns, primarily PES (polyester Find more here - / Contact us at -

Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Key data: 11000 kN

ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...

Key data: 1300 mm, 2 , 150 mm

Wide belt grinding machine 1300 mm 2 Volume

Key data: 1000 mm, 450 mm

Inv. Num. : 9150 Type: CNC 10 A/B Producer: DÖRRIES Created: GO 2015 Parameters: Control system: Siemens Sinumerik SL Table diameter: 1000 mm Engine power: 69 kW Max. workpiece diameter: 1500 mm Max. workpiece height: 450 mm Max. workpiece weight: 5000 kg Maximum table speed: 2-120/ 20-400 1/min Equipment: Chip conveyor 4-position turret Hydraulic/Manual 3-Jaw Chuck

BEKUM BA 52 snowblower – 6L accumulator head – up to 60 liters For sale: BEKUM BA 52 blow molding machine, suitable for the manufacture of high-volume containers and technical parts. Robust machine known for its reliability in industrial production. Technical characteristics • Brand / Model: BEKUM BA 52 • Type: Blow Molding Machine • Station: Single Station • Clamping force: 450 kN • Control: Original BEKUM control • Extruder: S 701 • Head: 6 liter accumulator head • Maximum production volume: up to 60 liters Mould dimensions • Length: 1200 mm • Width: 750 mm • Depth: 2 × 150–300 mm Ideal machine for the production of high-capacity canisters, tanks, technical containers and blown parts. Machine visible on site. Photos and additional information available on request.

Edge banding machine Brandt type KDF 890 Technical data: - Description: see machine photos

TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: Infinite, Regulating wheel speed nº: Infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dimensions of the regulating wheel (OD x ID x W): 305 x 190.5 x 254 mm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Power hydraulic motor: 0.55 Kw., Hydraulic motor power: 0.55 Kw., Total power: 27 Kw., Voltage: 220/380V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Tall: 1.900 mm, Weight: 6.420 Kg.

control: Fanuc Series 31i - B workpiece length - max.: 300 mm grinding wheel diameter: 356 mm grinding wheel width: 75 mm quill stroke: 45 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 600 mm grinding width: 375 mm workpiece height: 350-375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 65 mm arm length: 1600 mm workpiece height max.: 1600 mm surface area: 1800x800 mm turning speeds: 18-1800 U/min Feed: -2,54 mm/U The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.