mills machines used for sale

Extended twisting gear for Vemag filling machine Robby or DP, to put a metal detector in between, older model, functional, smooth-running

Key data: 5000 mm, 8000 mm, 4000 mm

Berthiez Vertical Turning Lathe • Year of manufacture: 1982 • CNC type: older system (CNC axes) Dimensions and Working Parameters • Table diameter: 5000 mm • Maximum turning diameter: 8000 mm • Maximum turning diameter at center: 5000 mm • Maximum workpiece height: 4000 mm • Ram travel (T): 3600 mm • Saddle travel (TA): 650 mm Speed and Power • Table rotation range: 0.6 – 60 rpm • Table motor power: 140 kW • Maximum load on hydraulic support: 160 t • Ram feed speed: 400 mm/min • Saddle feed speed: 2500 mm/min • Spindle rotation for milling: 0.01 – 0.50 rpm • Positioning speed: 0.001 – 0.50 rpm Tool Carriages 1. Hand-Operated (Primary) Carriage • Kulannum section size: 360 × 360 mm • Axial travel (CA): 2500 mm • Horizontal travel (CB): 3400 mm • Tilt range (E-F): 15° – 45° 2. Side Tool C ...

Width 52 cm Year of manufacture 1997 Automatic Paper Folding Machine Computer control with monitor Flat pile feeder FSA 52 with suction head 1st station: 4 fold pockets 52 cm Downstream knife shaft Flexible sword folding unit Shed display Delivery date: immediately

ELB PERFEKT BD10 SPS surface grinding machine was built in 2004 in Germany by ELB-Schliff Werkzeugmaschinen GmbH. The machine is used for precision grinding of workpieces with a maximum weight of 1000 kg. The machining process is carried out fully automatically on a large magnetic plate or directly on the work table. The grinding head, consisting of a spindle and grinding wheel, moves along guide rails to ensure an even and accurate surface finish. The ELB SCHLIFF PERFEKT BD10 SPS magnetic surface grinding machine is also equipped with, among others, a cooling system with a belt paper filter, which cleans the coolant after machining and allows it to be reused in the next process. The total weight of the machine is 6300 kg. Technical specifications of the ELB PERFEKT BD10 SPS grinding machine - magnetic plate dimensions (L x W): 1000 x 750 mm - maximum grinding dimensions (L x W x H) ...

Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.

IDEAL 5221-90 – Professional Pile Cutting Machine Powerful and precise paper stack cutting machine for printers, copy shops and offices. The IDEAL 5221-90 impresses with a cutting width of 520 mm and a cutting height of up to 80 mm, ideal for large paper stacks. The electric backgauge with digital measurement display enables fast and accurate work. Thanks to high-quality Solingen knife steel, clean and precise cuts are guaranteed. The SCS safety system ensures maximum safety during operation. ✔ Cutting width: 520 mm ✔ Cutting height: up to 80 mm ✔ Electric backgauge ✔ Digital measurement display ✔ Robust professional quality Ideal for professional cutting work with high demands on precision and reliability.

Single cylinder punching machine equipped with three separate working stations for different tasks: punching, shearing flat bars, and cutting angles. Punching capacity: 36t. Diameter 28 mm in 10 mm thickness. Flat bar shearing: 350 x 6 mm. 200 x 13 mm. Angle cutting at 90: 80 x 80 x 8 mm. Angle cutting at 45: 50x50x6mm.

The machine is in very good technical condition, testing is possible by prior arrangement.

Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

The machine is in very good technical condition, testing is possible by prior arrangement.

Year of construction 1998 Capacity 450 kg/h The Mondomix VL25 is designed for liquid and semi-liquid food products. With a capacity of up to 450 kg/h, it ensures a stable foam structure and consistent product quality. It is suitable for applications such as creams, fillings, marshmallow and other aerated confectionery products in industrial production.

Year of construction 1998 Capacity 450 kg/h The Mondomix VL15 is designed for liquid and semi-liquid food products. With a capacity of up to 450 kg/h, it ensures a stable foam structure and consistent product quality. It is suitable for applications such as creams, fillings, marshmallow and other aerated confectionery products in industrial production.

2008 HEIDELBERG STAHLFOLDER KH 78/4K-TK KH78+SPH-70+PFH 82 16 pages

Key data: 40 kp, 550 , 390

Rated power at 50%ED: 40kVA Short-circuit current: 26.2kA Electrode force: 65-390daN / single stroke Throat: 250-550mm Tubular arm cone Mk2, straight --- Welding control: MPS 10 (5 times, 8 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Wohlenberg 115

Binding machine Muller Martini PONEY 5 stations

Folder MBO 70X100 32 pages

MBO Folding machine 460X680

Cart beam punching machine / travelling head die cutting press 25 ton, 1600 x 500 mm, punching head 500 x 500 mm with 2-hand touch triggering, with light curtain approx. 1500 kg

Key data: 6000 mm, 2 mm

to sell on behalf of: Hydr. CNC Long Bending Machine OEMB H200.60 Bending capacity 6000 x 2 mm (aluminium 3 m m) With hydr. Adjustable upper beam (adjustment sheet thickness / radius) With hydr. Roller shears with parallel stop with CNC control approx. 6500 kg

Our state-of-the-art Automatic Tube Filling Machine is a versatile all-rounder and has been developed to optimally support companies with the highest quality standards. Thanks to its high-quality workmanship and wide range of applications, it offers intuitive operation that optimizes your tube filling processes efficiently and reliably. The powerful drives and the user-friendly color touchscreen control system allow maximum flexibility for format and product changeovers and greatly simplify your tube filling. The machine has memory locations for quick and reproducible setting of all relevant machine parameters. If you would like to optimize your tube filling processes through a strong production output with high quality at the same time, we at Impuls Packaging are your ideal partner. Overview of the overall system Parameters: Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 ...

Presse à injecter DEMAG ERGOTECH 110 T Type : 110/470-430 Année: 2003 Force de fermeture : 110 T / 1100 KN Diamètre vis : 40 mm Volume injectable : 231 cm3 Pression d’injection : 2200 bars Entre colonnes : 470 x 470 mm Dimensions des plateaux : 620 x 670 mm Épaisseur moule min: 200 mm Course d'ouverture: 600 mm Poids : 5600 kg Dimensions : 4,70 x 2,00 x 1,50 m

Thread grinding machine WMW 5822M with change gears.

Manufacturer: Gur Is Model: TY-1050 MT Year of Manufacture: 2020 Machine Type : Bagmaking Machine Condition: Good working condition, currently in production Materials and Film Specifications - Film types: LDPE, HDPE, recycled film extracts - Film thickness: 20 to 100 micron PE film Production Specifications - Sealing width (bag length): up to 1050 mm - Draw length (bag width): 80 to 600 mm - Linear speed: up to 300 m/min - Output: up to 200 bags per minute Bag Types Produced - Patch handle bags with handle cut-off - Safety bags - Side weld and bottom seal bags - Bottom gusset bags - Open and closed lip bags - Round bottom bags - Header seal bags Drive and Control System - Control: PLC with operator interface terminal - Drive: servo motor driven input nip rollers and sealing bar - Print registration: photocell print registration control included Attachments and Accessories In ...

Manufacturer: Limax Year of Manufacture: 2010 Machine Type : Side Weld Bag Making Machine Condition: Good working condition, currently in production Materials and Film Specifications Film types: LDPE, HDPE, recycled film extracts Production Specifications - Sealing width (bag length): 70 mm to 700 mm - Draw length (bag width): 100 mm to 900 mm - Linear speed: up to 150 m/min - Output: up to 130 bags per minute Bag Types Produced - Patch handle bags with handle cut-off - Safety bags - Side weld bags, various types - Open and closed lip bags - Header seal bags - Bottom gusset bags - Round bottom bags Drive and Control System - Control: PLC with operator interface terminal - Drive: servo motor driven input nip rollers and dual sealing bars - Print registration: photocell print registration control included Attachments and Accessories Included - Driven unwinder: 1600 mm wide - W ...

Manufacturer: Arvor Year of Manufacture: 2009 Machine Type : Bottom Seal Bag Making Machine Condition: Good working condition, currently in production Materials Film types: LDPE, HDPE, MDPE Production Specifications - Sealing width (bag width): up to 1200 mm - Draw length (bag length): 150 mm to 3400 mm - Number of lanes: 1 - Linear speed: up to 150 m/min - Output: up to 50 bags per minute Bag Types Produced - Garbage bags - Fruit and vegetable bags - Various other bottom seal bag formats Drive and Control System - Control: PLC with operator interface terminal - Drive: servo motor driven sealing bar - Print registration: photocell print registration control included Accessories Included - Unwinder - Photocell for printed film - Anti-static bars Find more here - / Contact us at -

Manufacturer: Huicheng Model:HCR6-HY Year of Manufacture: 2016-2019 Gauge : E14 Width : 132 inches 7 WIDE + 4 NARROW Find more here - / Contact us at -

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mm diameter of tools min: 69,85 mm tooth width max.: 58 mm diameter of tools max.: 230 mm x-axis: 325 mm y-axis: 350 mm z-axis: 470 mm work piece table - Ø: 212,71 mm b-axis: + 90,1 / - 1 ° Control: 160 i - MB FANUC total power requirement: 75 kW weight of the machine ca.: 10.000 Kg dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m WAGURI With EWAB robot cell (KUKA robot) without coolant filter system Fire extinguishing system without CO2 bottles Cooling oil return with various pumps / collecting basins Threading device A1/B2 axes with measuring probe Clamping device for a pinion shaft External spindle oil cooler Extraction system pinion shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ratio of transmission: 10:1 min. number of teeth: 3 max. number of teeth: 200 range of tooth size: 20 mm tooth width max.: 58 mm diameter of tools min: 69,85 mm diameter of tools max.: 230 mm x-axis: 325 mm y-axis: 350 mm z-axis: 470 mm work piece table - Ø: 212,71 mm b-axis: + 90,1 / - 1 ° Control: SIN 840 D SIEMENS total power requirement: 75 kW weight of the machine ca.: 10.000 Kg dimensions of the machine ca.: 6,10 x 4,40 x 3,30 m WAGURI with EWAB load cell built in 2012 (Linear loader) no coolant filter system available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool turret 12 times: C4 Capto total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power.  ...

plate thickness: 4 mm blade length: 220 mm pressure: 0 t weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,6 x 1,7 x 1,6 m total power requirement: 2,5 kW Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm travel -x axis: 280 mm feed x-axis: 0,1 - 30.000 mm/min rapid traverse X-axis: 30 m/min travel -z axis: 1.150 mm Feed z- axis: 0,1 - 60.000 mm / min. rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5.000 U/min tool turret - number of stations: 12 tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The dat ...

plate thickness: 3-4 mm pressure: 0 t Cutting length: 220 mm table height: 900 mm quantity of oil: 35 l Table dimensions: 950 x 790 mm total power requirement: 4 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° automatic cutting gap adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 400 mm control: Siemens 840 D swing diameter: max. 300 mm workpiece length - max.: 400 mm travel -x axis: 280 mm feed in x - axis: 0,1 - 30 m/min rapid traverse X-axis: 30 m/min travel -z axis: 1150 mm feed range Z-direction: 0,1 - 60000 mm/min rapid traverse Z-axis: 60 m/min spindle bearing diameter: 90 mm spindle head DIN 55026 - Size: A6 turning speeds: 1 - 5000 U/min tool taper: Capto C4 total power requirement: 45 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 7,0 x 5,0 x 3,2 m CNC lathe with SIEMENS SINUMERIK 840D control, Screw conveyor with chip breaker and return pumping station, NC-steady SMW-SLU-1-OLD Ø10-70mm, 12-fold tool turret SAUTER 0.5.460.220, NC tailstock, Artis monitoring, Pickup-loading incl. conveyor. Without coolant system, was connected to central supply. Machine can be inspected under power. The data ...

: 220 kN sheet thickness - max.: 8 mm travel -x axis: 2500 mm travel -y axis: 1250 mm : 90 m/min : 60 m/min : 108 m/min : 360 °/sec punch diameter: 76,2 mm workpiece weight: 150 kg : 0,01 mm bzw. 0,01° : 15 Stück tool changing time: 1,5 - 6,5 sec weight of the machine ca.: 11.050 kg dimensions: 6400 x 5800 x 2100 mm Working hours: 30.430 h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate length: 1250 mm plate thickness: 8 mm Punching capacity: 220 kN Number of working hours: 51.658 h total power requirement: kW weight of the machine ca.: 11.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: - mm grinding depth: - mm swing diameter: - mm : 220 mm : ja total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 1450 mm taper MK: 4 Cube: ja weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Neu geliefert an Universität. 2018 übernommen. Dann komplett bei BEMA gewartet und an an Einmannbetrieb geliefert. Nun wird die Maschine nochmal gewartet und Tischgeometrie neu hergestellt. 2-Achsen-Digitalanzeige Fagor nachgerüstet. -Reitstock mit Feinverstellung -Inn ...

x-travel: 4.000 mm y-travel: 1.700 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mm max. workpiece weight: 10.000 kg/m² T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min Orthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kW Speed range, stepless: 60 - 6.000 min-1 max. torque: 1.500 Nm tool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 25 kg changing positions: Horizontal/Vertikal total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: 11,0 x 6,0 x 4,6 m Equipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via inter ...

rotary table diameter: 600 mm grinding height: 600 mm grinding head - power requirement: kW workpiece weight: 300 kg grinding wheel diameter: 600 mm power spindle motor: 15 kW grinding height: 600 mm Control: SIEMENS STC weight of the machine ca.: 19 t dimensions of the machine ca.: 4,7 x 3,6 x 2,5 m Equipment & Accessories ? Wet grinding unit with universal paper belt filter, discharge container and magnetic separator, tank capacity approx. 500 l ? Electrical cabinet with digital drives SIMODRIVE 611D ? Coolant Mist extractor ? Recooling unit for grinding spindle motor ? Fully closed machine enclosure ? Central lubrication ? Swivebale Control Panel with SIEMENS Simatic 10” Touch HMI mounted at front of the machine ? Electro-permanent magnetic plate Ø 600 mm with 4mm pitch, absolute accuracy due to lack of heat, incl. Adhesion control (30-100%), autom. magnet pole switching via push b ...

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire diameter - max.: 2,5 mm wire diameter - min.: - mm workpiece length - max.: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

wire diameter - max.: 2 mm wire diameter - min.: - mm workpiece length - max.: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 1500 mm workpiece width - max.: 0,5 - 50 mm dimensions: 3300 x 1500 x 1800 mm feed stepless: 0-4 m/min total power requirement: 20,4 kW weight of the machine ca.: 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a p ...

internal diameter: - mm grinding depth: - mm swing diameter: - mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 540 mm turning length: 1520 mm control: Fanuc 18i-TB total power requirement: kW weight of the machine ca.: 15500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: - mm grinding depth: - mm swing diameter: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mm gear width: 200 mm max. module: 10 min. module: 0,5 max. dia. of teeth cutting: 1000 mm min. dia. of teeth cutting: 75 mm table diameter: 1000 mm boring diameter: 400 mm spindle stroke: 0 - 230 mm stroke position adjustment: 250 mm distance between table / ram: 480 / 730 mm dia. of shaper cutter: 8 Zoll taper: Morse 5 tool taper: 1 3/4 Zoll total power requirement: ca. 20 kW weight of the machine ca.: 11 t Standard version - Chip conveyor - Two additional tables with diameters of 850 mm and 1,500 mm - Several cutting tools - Set of interchangeable gears - Program for cutting in 1-2-3-4 passes/cycles - Program for spiral cutting - Several holders and clamps for workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.