milling used for sale

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWTable surface850 x 650 mmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)Tool Clamping BT 40Tool Clamping BT 40 for pull-studs DIN 69872 (differently from standard)Electronic HandwheelExternal electronic Handwheel

Milling Center Microcut Ric M800 LL BJ 2012

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface1400 x 600 mmDimensions (L x W x H)2,74 x 2,74 x 2,86 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z1100/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.6950 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Milling Machining Center Turi Ric M 800 LL BJ 2018

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsMaximum load (table centre)1000 KgDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsDrive power (40% DC)13 kWMax. torque83 NmTorque (100% DC)57 NmDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1400 x 560 mmWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 20 bar with chip conveyorProduction Package ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,6 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with60 PositionsMax. torque121 NmTorque (100% DC)84 NmDrive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmMaximum load (table centre)1000 KgWeight approx.6200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hProduction Package 40 barProduction Package 40 bar Option  ...

GeneralVertical Machining Centres; Control: 3D-control Heidenhain TNC 620 CharacteristicsTable surface1400 x 560 mmDimensions (L x W x H)3,93 x 3,49 x 2,94 (6,3 x 5,5 x 2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z1100/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgWeight approx.6050 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 3 with Chip ConveyorProduction Package 3 Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarfPrep. 4th axis EA 510.L indirect (Heidenhain ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical450 mmTool changerType of magazineChain Number of tools30 Type of gripperDouble gripper Floor space/WeightDimensions (L x W x H)2,92 x 2,42 x 2,88 (3,0) mWeight approx.9600 KgHSC70 5-Axis SpecificationHSC70 with 5-Axis specification clamping area Ø 600 mm // Ø 23.61 inch swivel range B-axis +20/-110°; C-axis 360° table load max. 500 kg // 1102.31 lbs absolute measuring systems incl. permanent co ...

Milling Machining Center First MCV 1100 BJ 2011

Speed: 12,000 revolutions per minute Pneumatic material clamping via foot switch Minimum quantity spraying device Milling area: 300 x 120 mm Stroke: 115 mm Weight: approx. 200 kg

Vertical milling machine Mark ACE BJ 1998

Vertical milling machine Viktor 1 1/2 VA BJ 1976

Milling Machining Center Turi Ric 1060 B BJ2012

Panhans 261 Tenoner Manufacturer: Panhans Type: 261 Year: 1987 M-Nr.: 1112 Specifications: Saw: 2.6 KW, 3.000 rpm, Tooldiam.: ø400 mm, spindellength 160 mm vertical spindel: 7.5 KW, 4.000 rpm, Tooldiam.ø400 mm, tenon length 170 mm, Spindellength: 160 mm Table: Solid steel table with pneumatic product clamps 80 mm adjustable Fence: Swiveling, for angular jobs Dimensions: ca. 1.9 m 1.6 m 1.7 m, plus Tenon table: 0,50,8 Meter 600 KG Condition: Fully functional

Okoma PN 2 Tenoner Manufacturer: Okoma Type: PN2 Year: M-Nr.: Specifications: Saw: 3,0 KW, 2.800 rpm, Tooldiam.: ø400 mm, spindellength 140 mm, with revolver head for height-setting vertical spindel: 7.5 KW, Tooldiam.ø40 mm- 4.000 rpm, tenon dept max. 170 mm, Spindellength: 160 mm Table: Automatic feeding table, solid steel, with pneumatic product clamps Table height: 80 mm adjustable Fence: Swiveling, for angular jobs Dimensions: ca. 2.2 m x 1.6 m , 1.7 m hoch, plus Zapfentisch: 0,50,8 Meter Weight: 600 KG

Helma Twinhead CopyShaper with 2 heads CF40 Copy shaper

Masterwood chisel mortiser Type: OMB1 (horizontal mortiser) Chissel: 2.2 kW electric movement with hydraulic drive stroke Table: electric sideward driven, with stops Fixation: 2 top/vertical hydraulic product clamp 2 horizontal hydraulic clamps

Verboom PN5 Left Manufacturer: Verboom Type: PN5 Left Year: Norm: EU-conformity Specifications: Saw: 2.2 KW top positioned aggregate; axial and radial positioning with analog reading Horizontal spindels: 2 2.2.kW, horizontal positioned spindels over each=other with Siko analog-digital counters for exact positioning 1st vertical spindel: Vertical spindle, 20040 mm, motor: 5,5 KW ; axial and radial positioning with analog reading 2nd vertical spindel: Vertical spindle, 120 mm, motor: 4,0 KW ; axial and radial positioning with analog reading Table: Large solid steel table with manual product clamps Length measurement: Analog cross cut fence extendable Swiveling, for angular jobs Dimensions: 3.5 (0.9+0.9) 1,6 m

bore capacity in steel (diameter): 35 mm x-travel: 450 mm y-travel: 250 mm z-travel: 500 mm digital: ja Dimensions (L/W/H): 1,2 / 1,1 / 1,95. mm thread dia.: 24 mm weight of the machine ca.: 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC mortising milling machine MASTERWOOD OMB1 CN3KF • Year : 2005 • Working dimensions: 5600 × 300 mm • Numerical control: SINCRO on Windows PC • Router head: 4 kW • Vertical bar presser for top routing • Digitally controlled retractable backgauges • Table with motorized belt and side stops• Motorized vertical loader and side unloader• Automatic horizontal press (20–220 mm) • Vertical press (18–160 mm) – working up to 33 mm from the milling pin • Power supply : 400 V / 13.4 A / 50 Hz • Weight : 2000 kg  Auction-ID: A1-50215-36

DECKEL MAHO DMC 63 V CNC vertical machining center was built in 2003 in Germany by DECKEL MAHO Geretsried GmbH. The machine has been regularly serviced and maintained throughout its entire service life. As part of the service work carried out, the CNC controller power supply, the coolant pump in the cooling system and the Y-axis cover scrapers were replaced. The gripper clamping force was adjusted and a new spindle covered by a one-year warranty was installed. The DECKEL MAHO DMC 63 V is designed for precision milling, drilling and threading of metal workpieces. Machining is performed by a spindle cooperating with an automatic, 24-position tool magazine. The spindle, driven by a high-power motor, reaches a maximum speed of 10000 rpm. The tool measuring probe, together with the readout system supports correct tool setting, ensuring high precision of the operations performed. All proces ...

For sale is a single-spindle copy milling machine from Elumatec, type AS 70/44, built in 2007. The machine was overhauled in the workshop (almost overhauled). As part of the overhaul, the following new spare parts were installed: - both bearings on the spindle, - both bearings on the engine, - Straps, - all linear bearings (10 pieces), - Gas pressure spring, - Both clamping cylinders including rubber buffers - Copy lever, - Öler (Festo), - Pressure reducers (Festo), - Foot valve with protective tube, - Clamping lever (5 pieces), - Copy scales, - CEE plug, - all hoses and plugs. In addition, the large horizontal and two vertical shafts were re-chromed. Most of the galvanized parts were re-galvanized. All information without guarantee. The price quoted is a VB net price. The machine is sold on account with VAT. Payment can be made in cash on site ...

x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...

• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm • Incl. 3-axis digital readout manufactured by HEIDENHAIN

With six slots and an attached vise, jaw width: 100 mm.

Attention: without the machine vises seen in the photos! • incl. three axis digital read out • incl. universal milling head

• Table with 7 slots • Incl. 3-axis digital readout manufactured by HEIDENHAIN

Table dimensions 2700 x 850 mm AFK bi-rotary head with 2.5° A and B shaft Auction-ID: A7-50261-1

New and used milling cutters and drills. Various manufacturers Approx. 300-350 pieces The table is not part of the auction. Auction-ID: A7-50255-1

x-travel: 2000 mm y-travel: 1250 mm z-travel: 1108 mm turning speeds: 60 - 4000 U/min spindle motor: 38 / 24 kW tool taper: SK 50 tool change unit: 40 Pos. table surface area: 1600 x 1250 mm table load: 7 t c-axis: +/- 120 ° B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,5 x 4 x 2,9 m 5-axis machining center with - CNC control Heidenhain iTNC 530 - NC rotary table with B-axis - Automatic swivel milling head (C-Axis) - 40-fold tool changer (SK 50) - Electronic handwheel - 2 Chip conveyor - Coolant device 30 l/min - Coolant through Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg

MTE” FIXED BED MILLING MACHINE Mod. BF-1700 FEATURES: CONTROL UNIT: • Model: TNC 410 • Brand: HEIDENHAIN MAIN TRANSMISSION: • Spindle speed range: 40 – 2500 rpm • Max spindle speed: 3000 rpm • Taper: SK 50 TRAVEL: • X-axis travel: 1500 mm • Y-axis travel: 1000 mm • Z-axis travel: 1000 mm WORK TABLE: • Table length: 1700 mm • Table width: 1000 mm • Max table load: 5500 kg

MTE” FIXED BED MILLING MACHINE Mod. BF-2700 CARACTERISTICS: • MACHINE LENGTH: 7000 MM • MACHINE WIDTH: 3000 MM • MACHINE HEIGHT: 3000 MM CONTROL UNIT: • MODEL: TNC 410 • BRAND: HEIDENHAIN MAIN DRIVE: • SPINDLE SPEED RANGE: 3000 1/MIN • SPINDLE TAPER: SK 50 TRAVELS : • X-AXIS TRAVEL: 2500 MM • Y-AXIS TRAVEL: 1000 MM • Z-AXIS TRAVEL: 1000 MM WORKING TABLE: • EXTERNAL LENGTH: 2700 MM • EXTERNAL WIDTH: 1000 MM • POWER CONSUMPTION: 40 KW

for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).

Key data: 880 mm, 630 mm, 630 mm

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions

8 pieces diameter 16 mm; 4 pieces diameter 20 mm; 2 pieces diameter 32 mm; unused and in original packaging Auction-ID: A1-49785-198

Includes 100 matching inserts LNGQ1206 Auction-ID: A1-49785-172

Includes 7 different magnetic clamping blocks Auction-ID: A1-49785-33

Auction-ID: A1-49785-322

Including face milling, drilling, collet, tapping bush holders; approx. 45 pieces Auction-ID: A1-49785-43

Reference: 744-05; own weight approximately 100 kg Auction-ID: A1-49785-260

Diameter: 60 mm; various sizes; approx. 130 pieces; lying in 2 drawers Auction-ID: A1-49785-272

Various recordings with ABS40/ ABS50 coupling; in 2 cardboard boxes Auction-ID: A1-49785-209

Including face mill, ER collet holders; Includes various boring tools/ 42 pieces in total Auction-ID: A1-49785-45

Including accessories; on pallet Auction-ID: A1-49785-261

Various sizes; unused and in original packaging Auction-ID: A1-49785-303

7 pieces diameter 50 mm with reference A21150R08-11; 8 pieces diameter 63 mm with reference A21163R10-11; unused and in original packaging Auction-ID: A1-49785-164

Including diameter 22 and 32 mm; various lengths; unused and in original packaging Auction-ID: A1-49785-94

Including T-slot / diameters 63 x 3 mm, 63 x 5 mm, 100 x 4 mm; Including matching inserts and miscellaneous; in 2 cardboard boxes Auction-ID: A1-49785-230