milling used for sale

Heckler & Koch horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Year: 2003 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - variable milling angles - turret stop for milling depth adjustment - cooling system - quick cutter change system

Horizontal milling machine Steinel SH1 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

2x double spindle milling machine Walther Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Horizontal milling machine Steinel Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Hermle horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Deckel Maho 4-axis CNC milling machine DMC 64 V linear Working Range: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - With 520 Heidenhain control - With coolant system + paper filter - Probe preparation, but probe is missing - Few operating hours - Machine is first owned - from the production of individual parts of precision parts - All 4 axes can be moved, only the transmitter of the main spindle is defective Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or ...

max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table 600 x 300 mm Travel distances X / Y / Z: 400 / 300 / 350 mm Spindle holder SK 40 Spindle speeds: 50 - 2500 rpm Drive power 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, Weight 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Instruction manual in German

X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible.

MTE K-15 Bed Milling Machine Technical Specifications: Clamping Surface: 1,700 × 750 mm Spindle Speed: 40–3,000 rpm Tool Clamping Force: 1,500 daN Milling Feed Rate: 0–12,000 mm/min Positioning Feed Rate: 15 m/min Positioning Accuracy: < 0.012 mm Repeatability: < 0.007 mm Machine Weight with ATC: approx. 8,500 kg

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-spindle copy milling machine with stops for aluminium and plastic profiles Maximum spindle speed: 12,000 rpm Stop arms right and left Good condition

Vision Wide VF4000 portal milling machine for sale. 2-axis milling head (1 degree C-axis and 1 degree B-axis) with position determination Encoder SK50 VTEC VF4000 Dimensions X-axis 4200 Y-axis 2300 Z-Axis 1020 Tool magazine 40WZ Control Siemens 840D SL

Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible.

X-axis: 500mm, y-axis: 430mm, z-axis: 400mm, table dimensions: 510x450x410mm, max. table load: 250kg, angular clamping table: 800x390mm, feed rate x-/y-axis: 4-1600mm/min, z-axis: 4-1000mm/min, feed force: 5000N on all axes, rapid traverse x-/y-axis: 1.6m/min, z-axis: 1m/min, tool holder (DIN 2079): ISO 40, cutter drawbar thread: M16, hydromechanical tool clamping: 12,000Nm, quill stroke: 80mm, drive power: 3kW, 18-speed sliding-gear transmission: manually or automatically selectable, torque: 5Nm, spindle speed: 50-2500rpm, connected load: 6kW, control: Heidenhain TNC 114B (hand control type HS262), display resolution: 0.005mm, length: 1400mm, width: 1300mm, height: 1830mm, weight: 1.6t, space requirement: 2300x2300x2400mm, equipment: machine light, coolant tank: 18l, external coolant supply: 3bar, various tool holders, spindle tool. On-site inspection is possible.

Lagun X: 3000 - Y: 1000 - Z: 1200 mm CNC Longitudinal travel X-axe: 3000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 1200 mm Dimensions clamping space- table: 3100 x 800 mm Power on spindle: 22 kW Type of millinghead: BT-50 Max speedrange: 50 > 3000 rpm (840 Nm) Control: Heidenhain iTNC 530 Power needed (KVA): 35 kW Length : 8744 mm Depth: 3765 mm Height: 3352 mm Weight: 14 ton

CMZ TD-30-TM-800 CNC Turning-Milling Center Technical Specifications Manufacturer: CMZ Model: TD-30-TM-800 Year of Manufacture: 2021 Control System: FANUC 32i-TB Plus Maximum Turning Length: 800 mm Maximum Turning Diameter: 550 mm Spindle Power: 42 kW Bar Capacity: 82 mm Tool Turret: 16 positions Machine Weight: 8,700 kg Equipment: Driven Tools, C-axis, Chip Conveyor

max. workpiece diameter: . mm threading length: . mm max. module: 10 min. module: 1 diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min Various reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines. - Heavy-duty gear hobbing head ApFW (reconditioned) - Heavy-duty thread milling head ApGs (reconditioned) - Thread milling head ApG (reconditioned) - ApGi internal milling head (refurbished) - Various bushing sets - Lunettes - Counterholder with 3-jaw chuck - Various milling mandrels and much more, as shown in the pictures If you are interested in individual items or the entire package, please send me your price proposal. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg

Pehu CNC-besturing 5500 mm invoerrolband met CNC-positionering Admission in spindle (cone x): Mk4 Max drillingdepth: 180 mm Max drillingcapacity: dia 32 mm THROAT DEPTH DRILLING-SPINDLE: 550 mm Speeds: 55 > 5000 rpm Digital read-out: Pehu CNC positioning Motor power: 3 kW

x-travel: 3500 mm y-travel: 1000 mm z-travel: 900 mm Control: Heidenhain iTNC 530 total power requirement: kW weight of the machine ca.: 21 t dimensions of the machine ca.: 10770 x 4100 x 3150 m Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Technical data / Accessories Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

INTOS ?ebrák FN 20 Fräsmaschine Universal + Zubehör Hersteller: INTOS ?ebrák Typ: FN 20 Zustand: gebraucht Baujahr: 2003 Gewicht der Maschine: 910 kg Abmessung: ? Länge mm: 1690 ? Breite mm: 1270 ? Höhe mm: 1175 Aufspannfläche des Senkrechttisches: 216 x 680 Aufspannfläche des Winkeltisches: 240 x 600 Die breite und Abstand der T-Nuten mm: 12H8 x 45 0,1 Spindeldurchmesser im Vorderlager mm: 45 Spindelkegel: ISO 40 Spindeldrehzahlen: 18 Bereich U/min: 50 ? 2000 Vorschübe : 18 Bereich mm: 8 ? 400 Eilvorschub mm/min: 1340 Bewegung des Spindelstockes: ? von Hand: 200 ? selbstständig: 190 Durch Verstellung des Halters erzielte Auslegung mm: 42 Tischlängsbewegung: ? von Hand mm: 300 ? selbstständig mm: 290 Senkrechtbewegung des Tisches: ? von Hand mm: 350 ? selbstständig mm: 340 Lieferumfang: ? INTOS ?ebrák FN 20 Fräsmaschine Universal ? Zubehör  ...

DECKEL FP1 Aktiv Fräsmaschine Hersteller: Deckel Typ: FP1 Aktiv Zustand: sehr gut Steuerungsart konventionell Steuerung Aktiv HEIDENHAIN TNC X-Weg 300 mm Y-Weg 160 mm Z-Weg 340 mm Werkzeugaufnahme SK40 Drehzahl 40-2000 U/min. Steuerung Aktiv HEIDENHAIN TNC Gesamtleistungsbedarf 2 kW Maschinengewicht ca. 0,73 t Raumbedarf ca TBH 1200x1100x1600 mm

Universalfräsmaschine Deckel FP4M Aktiv Hersteller: Deckel Typ: FP4M Zustand: gebraucht, gut Digitalanzeige: 3 ? Achsen- Digitalanzeige Heidenhain Verfahrwege: X ? Achse: ca. 500 mm Y ? Achse: ca. 400 mm Z ? Achse: ca. 400 mm Tischaufspannfläche: ca. 700 x 400 mm Drehzahlbereich: ca. 50 ? 2500 U/min Werkzeugaufnahme: ISO 40 Werkzeugklemmung hydraulisch Antriebsleistung: ca. 6,0 kW Vorschübe & Eilgänge: in allen 3 Achsen Vorschubbereich: ca. 8 ? 630 mm/min Eilgänge: ca. 3,0 m/min L x B x H: ca. 2300 x 1800 x 1800 mm Gewicht: ca. 1750 kg Maschinenleuchte Spindelschutz Lieferumfang: ? 10x Werkzeugaufnahmen ? Hochdruckschraubstock Allmatic ? Dokumentation ? Spindelschutz

Fräsmaschine Macmon M 434 NC Hersteller: Macmon Typ: 434 NC Steuerung: Heidenhain TNC 124 Baujahr: 2008 Zustand: gebraucht X-Achse: 400 mm Y-Achse: 250 mm Z-Achse: 400 mm Aufspannfläche 600 x 320 mm Hauptantrieb: AC-Motor kW 3 Drehzahlbereich: Vertikal stufenlos 30 ? 6300 Horizontal stufenlos 0 ? 4200 ? Vorschub 0 ? 10 m/min Werkzeugaufnahme ISO 40 Betriebsspannungn 400 / 50 Volt / Hz Steuerspannung 24V Gewicht 1200 kg Lieferumfang: ? Dokumentation ? Maschinenfüße ? Kühlmittelanlage ? Spindelschutz ? Maschinenleuchte ? HR410 Handrad ? Horizontalspindel Gegenhalter

Kunzmann WF 7 CNC Fräsmaschine TNC 410 Steuerung Hersteller: Kunzmann Typ: WF 7 Baujahr: 2001 Zustand: gebraucht, unter Strom Steuerung: Heidenhain TNC 410 X-Weg 610 Y-Weg 400 Z-Weg 400 Aufnhame SK 40 Drehzahl 1-5000U/min Kipp/-Schwenktisch Lieferumfang: ? Unterlagen ? Diverse Werkzeugaufnahmen

Kunzmann WF 600 M Fräsmaschine (2012) Hersteller: Kunzmann Typ: WF 600 M Baujahr: 2012 Zustand: gebraucht, sehr gut Steuerung: Heidenhain TNC 124 X ? Achse 600 mm Y ? Achse 400 mm Z ? Achse 400 mm Tischlänge 650 mm Tischbreite 350 mm Spindeldrehzahl 4500 U/min Vertikalpinole und Horizontalpinole ? SK40 Hydraulisches Anzugssystem Hauptantriebsmotor: 5,5 kW Abmessungen ca.: 2 x 2 x 2 m Gewicht ca 2000 Kg Kühlmittelanlage Lieferumfang: ? Dokumentation ? Maschinenleuchte ? Maschinenfüße ? Maschinenschraubstock

Kunzmann WF 4/3 Fräsmaschine TNC 320 Hersteller: Kunzmann Typ: WF 4/3 Fräsmaschine Baujahr: 2009 Zustand: gebraucht, aus Lehrwerkstatt, gereinigt und unter Strom, vorführbereit Spindelstunden: 2.542h x-Weg: 400 mm y-Weg: 350 mm z-Weg: 400 mm Werkzeugaufnahme SK 40 Spindeldrehzahlen 1,0 ? 4.500 U/min Vorschübe 0 ? 2000 mm/min Pinolenhub 60,0 mm Tischgröße 650 x 350 mm T-Nuten 14 H7 Steuerung TNC 320 Motorleistung 5,5 kW Gewicht 1920 kg Raumbedarf ca. 2000 x 2000 x 2100 mm Gesamtleistungsbedarf: ca.7 kVA Zentralschmierung Kühlmitteleinrichtung CE-Konform Lieferumfang: ? Technische Dokumentation ? Vollschutzkabine ? LED Maschinenleuchte

met spanentransportband Longitudinal travel X-axe: 1050 mm Crosstravel Y -axe: 560 mm Travel Z-axe (Height): 560 mm Dimensions clamping space - table: 1400 x 550 mm Power on spindle: 9 kW Max speedrange: 10 > 6000 rpm Control: Fanuc O-M ACCESSORIES & TOOLING: toolchanger, 32 positions

Year: 2008 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system

Lg.Nr. 26305 Technical data: - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Workpiece width / clamping range W 115 x D 100 mm - Milling area at the top after stop / copy template. W 340 x D 100 mm - Stroke at the top T 110 mm - Milling area at the bottom after stop / copy template. W 240 x 90 mm - Stroke bottom front / rear 95 / 45 mm - Spindle speed 12000 rpm - Dosing spray device - Air consumption per work cycle - without spraying 12 ltr - with spraying 24 ltr - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

MIKRON XSM 400 is a CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt für hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Verfahrwege X 400 mm, Y 450 mm, Z 350 mm; max. Werkstückgewicht auf dem Tisch 100 kg; Paletten EROWA 320x320 mm, Anzahl Paletten 7; Werkzeugmagazin 68 Plätze. Spindelaufnahme HSK E 40 bis 42000 t/min; Frässpindelmotor 14 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen ca. 4000x4000 mm. Zubehör: Späneförderer; Kühlmitteleinrichtung; Kühlnebelsprüheinrichtung; Papierfilteranlage; Beleuchtung; Kühlmittel-/Nebelabsaugung; Palettenwechseleinrichtung; Zustandsleuchte. Geeignet für enge Toleranzen in Branchen wie Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

ABENE VHF 360 TI ist eine CNC Fräsmaschine für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 1200x450 mm, Wege X650 Y480 Z475 mm, max. Werkstückgewicht 400 kg, Pinolenhub 75 mm, Schwenkbereich 0–140°, Aufnahme ISO40. Technik: stufenloser Spindeldrehzahlbereich 55–4000 t/min, Vorschübe stufenlos bis 4000 mm/min (X/Y) und 1500 mm/min (Z), Frässpindelmotor 7,5 kW, Gesamtleistung 14 kW, 3x400 V 50 Hz, Maschinengewicht ~2300 kg, Platzbedarf 3000x3000 mm. Zubehör: Bohrspindel, mechanische Handräder, Kühlmitteleinrichtung, Maschinenlampe. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Table dimensions: 5000 x 2000 mm Auction-ID: A7-32339-6

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

consisting mainly of carbide milling cutters in various designs and sizes in very good condition Auction-ID: A7-49089-6

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

in round design, mainly from the manufacturer SECO Auction-ID: A7-49089-19

in different sizes and designs mixed with taps and normal milling cutters Auction-ID: A7-49089-8

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

Key data: 1600 mm, 800 mm

CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg

Machine number: 34101101 Operating voltage: 400 V Rated current: 128 A Frequency: 50 Hz Power: 89 kVA Operating hours read: 2782 Turning length: 3000 mm Center height above floor: 1270 mm Circulation diameter over slide top: 520 mm Circulation diameter over telescopic left: 520 mm Circulation diameter over steady rest slide: 520 mm Main spindle left, spindle diameter in front bearing: 160 mm Spindle bore: 77 mm Spindle speed: 4000 rpm Torque: max. 630 Nm tailstock moving built-in centering tip: MK 5 tailstock Quill diameter: 135 mm Starting force: 200 to 1200 daN Max. workpiece weight: 1000 kg Turning-drilling-milling unit Drive power: 15 kW Torque: max. 190 Nm Tool holder: HSK 63 The machine is equipped with a tailstock, a moving steady rest SMW Autoblock and a three-jaw chuck RÖHM, diameter: 310 mm incl. matching workshop cabinet and workbench with large items Documentation max. tool  ...

X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additi ...

Key data: 1300 mm, 630 mm, 630 mm

Bed milling machine Manufacturer: Correa Type: A10 Year of Make: 1988 Control: HEIDENHAIN TNC 355 Travel X/Y/Z: 1,300 x 630 x 630 mm Clamping area: 1,700 x 630 mm Workpiece weight: 3,000 kg Hours: 25,845 Power: 19 kW Spindle Type: ISO 40 Dimensions L/W/H: 3,870 × 2,630 × 2,200 mm Machine weight: 6,800 kg

Key data: 1800 mm, 800 mm, 800 mm

Bed milling machine Manufacturer: Correa Type: A16 Year of Make: 1988 Control: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping area: 2,000 x 630 mm Workpiece weight: 3,000kg Hours: 12,103 Power: 19 kW Spindle Type: ISO 50 Dimensions L/W/H:4,886 × 2,720 × 2,500 mm Machine weight: 7,500 kg