milling used for sale

x-travel: 4000 mm y-travel: 1350 mm z-travel: (Vert.) 1600 mm Control: Heidenhain iTNC 530 table surface area: 4200 x 1150 mm table load: 13 t tool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/min transmission ratio: 2 spindle motor: 28/38 kW feed range: 5000 mm/min rapid traverse: (X/Y) 12 m/min rapid traverse: (Z) 10 m/min weight of the machine ca.: 37 t dimensions of the machine ca.: 12,9 x 6,53 x 3,79 m In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. CNC-control HEIDENHAIN iTNC 530 Electronic handwheel 50-position tool changer Controlled universal milling head, indexable 2.5 / 2.5 deg. Coolant device Cooling through the spindle 2 chip convey ...

x-travel: 2500 mm y-travel: 1300 mm z-travel: 900 mm Control: Heidenhain iTNC 530 table surface area: 2500 x 800 mm table load: 5,0 t tool taper: SK 50 DIN69871 spindle turning speed range: 36 - 4000 U/min feed range: 2 - 12000 mm/min main drive: 25 kW total power requirement: 50 kW weight of the machine ca.: 17 t dimensions of the machine ca.: 8,4 x 4,5x 3,8(3,9) m The main engine was overhauled in September 2022 for € 6,000. The machine was partially overhauled in 2007 Scope of overhaul: Feed motors were overhauled New Heidenhain iTNC 530 control system with new main spindle drive (Siemens) Retention of the control cabinet and feed drives Geometric overhaul of the machine Overhaul of the tool changer Defective guideway covers were repaired or replaced The milling head was completely overhauled approx. 3 years ago. Equipment: CNC control Heidenhain iTNC 530 Horizontal/vertical swivell ...

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: 83,2 t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Work ...

x-travel: 300 mm y-travel: 160 mm z-travel: 290 mm table surface area: 210 x 600 mm tool taper: SK 40 spindle turning speed range: (16) 40 - 2000 U/min feeds -stepless-: 5 - 500 mm/min rapid traverse: 1,2 m/min spindle motor: 1,5 / 1,9 kW total power requirement: 9,5 kVA weight of the machine ca.: 730 kg dimensions of the machine ca.: 2000 x 2200 x 1655 mm The machine comes from a training center. Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 250 mm z-travel: 400 mm tool taper: ISO 40 spindle turning speed range: 30-6300 / 20-4200 U/min feeds: 0 - 10.000 mm/min quill stroke: 90.0 mm table-size: 600 x 320 mm T-slots: 5 x 14 x 63 mm Control: TNC 410 CA spindle: ein ~ 126 Std. engine output: 11.0 kW weight: 1300 kg dimensions of the machine ca.: 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used () with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA workshop-oriented path controls, with Programming in easy-to-understand plain text dialog HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ...

x-travel: 315 mm y-travel: 180 mm z-travel: 320 mm taper in main spindle: ISO 40 table surface area: 600 x 250 mm T-slots: 5 Stk. turning speeds: 45.0 - 1950 U/min feed stepless: 10 - 170 mm/min voltage: 400 V total power requirement: 5.1 kW weight of the machine ca.: 1300 kg range L-W-H: 1000 x 1400 x 1800 mm From a training workshop (vocational school) Well maintained () Features: - Robust electric motor universal milling machine - HEIDENHAIN 3-axis digital display - Rotatable universal milling head (right/left = 90°) - Manual milling spindle feed, with lock - Stable T-slot clamping table - Axis feed with rapid traverse in Y-axis Rapid traverse continuously adjustable - Manual axis adjustment in Z+X axis - Control cabinet, installed on the left - Coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 510 mm y-travel: 450 mm z-travel: 410 mm taper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mm T-slots: 6 Stk. turning speeds: 50 - 2500 U/min feed stepless: 4-1600/4-1000 mm/min voltage: 400 V total power requirement: 5.0 kW weight of the machine ca.: 1400 kg range L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=iSTVEdv2fO8 Furnishing : - robust universal milling machine - swiveling control panel, right front - rotatable universal milling head (re/li = 90°) with hydraulic tool clamping - manual milling spindle feed, with locking - swiveling milling spindle protection - Stable T-slot clamping/angle table - Axis feeds with rapid traverse - Central lubrication unit - Control cabinet, installed on the left Digital display - without function The data fo ...

x-travel: 280 / 300 mm y-travel: 250 / 270 mm z-travel: 300 / 310 mm turning speeds: 45 - 2240 U/min turning speeds: 18 Stufen spindle taper ISO: 40 quill stroke: 60.0 mm table:: 670 x 320 mm table load: 150 kg feed range: 12.5 - 630 mm/min feed: 18 Stufen rapid traverse: 1.200 mm/min workpiece weight: max. 150 kg T-slots: 5x 12 x 63 mm total power requirement: 1.6 kW weight of the machine ca.: 1100 kg range L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=7IsC5cg9WlI Features: - Robust electric-driven universal milling machine - ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button - Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions - Pivoting milling spindle guard - Coolant system - Lower chip tra ...

power capacity: 0,75 kW degree: 45° Grad turning speeds: 10.000 U/min milling height: 4,0 mm motor: 400 Volt range L-W-H: 560 x 300 x 450 mm weight: 44,0 kg Description : - Advantage of the sliding guide rail: the workpiece is not moved and therefore cannot be scratched - Ideally suited for deburring and chamfering (visible edges) of various - Materials e.g .: steel, aluminum, non-ferrous materials, plastics, etc. - Ideal for producing visible edges with excellent surface quality - High dead weight for vibration-free work scope of delivery - Slidable guide rail 500 mm - milling head - HM indexable inserts - Operating tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2003 : 4544 : prompt, Zwischenverkauf v : Spanien : 13800 € : 1 : 50 - 1700 (12) U/min : ISO 40 : 600/210/400 mm : 800 x 225 mm : 1500 mm : 1350 mm : 1850 mm : 950 kg : 1,5 kW with 3-axis digital display Fabr.Fagor Cooling equipment Machine lamp Swivelling universal milling head (Huron design) Horizontal milling device with counter bearing Table enclosure automatic feeds in X and Y Machine feets User Manual and EG Confirmation english BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-m ...

x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Control: MSX 701 III MAPPS Main spindle:: Max. rpm: 14.000 min/-1 power capacity - main spindel: 18,5 / 11 kW max. Torque: 120 Nm tool taper: MAS BT 40 distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 100 - 730 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm max. workpiece height: 900 mm change time of pallets: 6,0 sec b - axis: 0,001 ° Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT 40 max. tool diameter: 70 / (140) mm max. tool length: 400 mm max. tool weight: 8,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 m/min feed speeds: 0 - 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 35 kVA weight of the machine ca.: 9,8 t dimensions of the machine ca.: 5,5 x 3,5 x 2,8 m Docume ...

x-axis: 10.100 (2x 5.000) mm y-axis: 3.000 mm z-axis: 1.500 mm Control: Sinumerik 840 D Siemens distance between columns: max. 3.000 mm passage: max. 1.950 mm distance spindle center to table: max. 1.800 mm distance spindle nose and table: 1.350 / 1.500 mm Main spindle:: type: P 8005020/00-4 turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 20 kW max. Torque: 48 Nm tool taper: HSK-A63 DIN 69063 Spindle Extension: 450 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° Main spindle:: type: P 8002320/00-4 turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 40 kW max. Torque: 1.100 Nm tool taper: HSK-A100 DIN 69063 Spindle Extension: 300 mm swivellable: B: +110° / -10 ° rotatable: C: +/- 200 ° work table:: table surface area: 4.000 x 2.200 (2x) mm max. table load: 12 / 20 t height over floor: 700 mm number of ...

x-travel: 2.200 mm y-travel: 560 mm z-travel: 720 mm control: iTNC 530 Heidenhain turning speed range - milling: 20 ~ 12.000 U/min power capacity - milling spindle: 35 / 25 kW tool taper: SK 40 tool piece magazine with: 100 pos. table surface area: 2.600 x 600 mm rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 50 m/min rapid traverse Z-axis: 50 m/min max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6 kg max. table load: 2.200 kg total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7,0 x 4,2 x 2,7 m Chip conveyor: Coolantsystem: interface 4. axis: 4. axis: 560 mm Seperating wall: oil mist extraction: Tailstock: 350 mm / MK 5 elektr. hand wheel: through spindle coolant: 40 bar Travelling column milling machine DECKEL MAHO - DMF 220 Linear - new spindle installed (April 2024) - in ...

bore capacity in steel (diameter): 25 mm x-travel: 500 mm y-travel: 260 mm cross-moving table: 880x320mm spindle turning speed - stepless: 100-9000 U/min control: HEIDENHAIN TNC310 vertical movement: 480 mm quill stroke: 160 mm weight of the machine ca.: 2.2 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1200 mm y-travel: 350 mm z-travel: 350 mm table-size: 1800x405 mm spindle taper ISO: 50 spindle turning speed range: 30-1800 U/min weight of the machine ca.: 4.4 t Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 350 mm z-travel: 380 mm table-size: 790x360 mm spindle turning speed range: 63-4000 U/min spindle taper ISO: 40 quill stroke: 50 mm range L-W-H: 1600x2000x1850 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 135 mm z-travel: 300 mm spindle turning speed range: 100-2000 U/min table-size: 590x210 mm weight of the machine ca.: 0.6 t Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 150 mm z-travel: 340 mm table-size: 600x260 mm spindle taper ISO: 40 spindle turning speed range: 40-2000 U/min weight of the machine ca.: 700 kg Visit us on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 210 mm z-travel: 340 mm table-size: 600 x 400 mm spindle turning speed range: 40-2000 U/min spindle taper ISO: 40 quill stroke: 60 mm range L-W-H: 1200x2000x1700 mm digital readout: PHILIPS weight of the machine ca.: 1.4 t Active Digital read out Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): / mm x-travel: 1750 mm y-travel: 1250 mm z-axis: 1250 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

travel: 600 mm length: 450 mm width: 400 mm spindle turning speed range: 20 4500 U/min Control: Heidenhain TNC 425 weight: 3300 kg dimensions of the machine ca.: 4,0 x 3,8 x 2,1 m total power requirement: 15 kW tool taper: HSK A 63 table-size: 850 x 440 mm 3-axis machining centre X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm Table size: 850 × 440 mm Tool holder: HSK-A63 Spindle speed: 20 – 4,500 rpm Control system: Heidenhain TNC 425 Total power requirement: 15 kW Machine weight: approx. 3,300 kg Space requirement (L × W × H): approx. 4.0 × 3.8 × 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6 bar table diameter: / mm table load: / t Pneumatic drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 turning speeds: 6300 U/min tool taper: SK40 quill stroke: 80 mm table-size: 550 x 1000 mm table load: 0,6 t weight of the machine ca.: 4 t X-axis travel: 710 mm Y-axis travel: 600 mm Z-axis travel: 455 mm Control system: Dialog 4 Spindle speed: 6,300 rpm Tool holder: SK 40 Quill stroke: 80 mm Table size: 550 × 1,000 mm Table load capacity: 600 kg Machine weight: approx. 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1150 mm control: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mm turning speeds: 16000 U/min total power requirement: 60 kW - 5-Axis-Fräsmachine - max. rpm: 16.000 - X-Way: 3000 mm - Y-Weg: 2500 mm - Z-Way: 1150 mm - A-Axis: +/- : 100 mm - C-Axis: +/- : 181,5 mm - Tabelsize: 3000 mm x 2500 mm - option: Blowing air outside - kinematics: Clevis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm feed power: 160 kp speed: 20 - 200 mm/min rapid traverse: 1200 mm/min total power requirement: 1,4 kW weight of the machine ca.: 0,45 t X-axis travel: 300 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Feed force: 160 kp Feed speed: 20 – 200 mm/min Rapid traverse: 1,200 mm/min Total power requirement: 1.4 kW Machine weight: approx. 0.45 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 560 mm y-travel: 500 mm z-travel: 400 mm Control: TNC 360 spindle speed:: 40-4.000 U / min total power requirement: 7,5 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,6 x 1,8 x 2,2 m X-axis travel: 560 mm Y-axis travel: 500 mm Z-axis travel: 400 mm Control system: Heidenhain TNC 360 Spindle speed range: 40 – 4,000 rpm Total power requirement: 7.5 kW Machine weight: approx. 2.6 t Space requirement (L × W × H): approx. 2.6 × 1.8 × 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1190 mm y-travel: 530 mm z-travel: 540 mm table-size: 1600 x 400 mm spindle drive: 11 kW tool taper: ISO 50 turning speeds: 28-1400 U/min feeds: 16-800 mm/U total power requirement: 21 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: m X-axis travel: 1,190 mm Y-axis travel: 530 mm Z-axis travel: 540 mm Table size: 1,600 × 400 mm Spindle motor: 11 kW Tool holder: ISO 50 Spindle speed range: 28 – 1,400 rpm Feed rate: 16 – 800 mm/min Total power requirement: 21 kW Machine weight: approx. 4.8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 270 mm z-travel: 355 mm tool taper: ISO 50 speeds of spindle (left/right): 25-1400 total power requirement: 3,8 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m X-axis travel: 850 mm Y-axis travel: 270 mm Z-axis travel: 355 mm Tool holder: ISO 50 Spindle speed (clockwise / counter-clockwise, infinitely variable): 25 – 1,400 rpm Total power requirement: 3.8 kW Machine weight: approx. 2 t Infinitely variable feed rates on all axes (X, Y and Z) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

APK special-purpose automatic sawing and milling machine for cutting timber blocks to length and subsequently milling them. Custom-built for the production of cutlery tray inserts (see pictures) or similar workpieces. Workflow: 1. Feeding the material from the magazine 2. Cutting to length (sawing) to the desired length 3. Milling the sawn workpieces 4. Ejection of the finished part. Technical data: Workpiece length: 55–170 mm Workpiece height: max. 27.5 mm Workpiece width: max. 28 mm Milling units: 2 Cross-cut saw: 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the stable milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: Working width: approx. 1,000 mm Spindle diameter: 40 mm Feed: Pneumatic Condition: Gebraucht Location: Tauberbischofsheim, Germany

Schneider SK D 2 twin-spindle table router for the precise machining of solid timber and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different router bits without any changeover times. Ideal for a wide range of routing tasks in window, door and furniture manufacturing. Technical data: Motor, each: 4.5 kW Spindle diameter: 30 mm Spindle centre distance: 600 mm Speed settings: 3000/4000/5000/6000/8000/10000 Condition: Gebraucht Location: Tauberbischofsheim, Germany

x-travel: 580 mm y-travel: 380 mm z-travel: 360 mm total power requirement: 6 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,800x2,130x1,980 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 720 kg dimensions: 1200 x 950 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DECKEL FP4M Universal Milling machine Mach. No. 11629, YOM 1984 X/Y/Z= 500/400/400 mm Quill stroke Z axis 90 mm Universal Tilting table : 800 x 460 mm DRO-3 axes HEIDENHAIN spindle speed : 50 to 2500 rpm Spindle taper : ST 40 max. table load 600 kg Feeds x/y/z/ 8-630 mm/min Rapid travel x/y/z/ 1300 mm/min Spindle Motor : 4 Kw Weight (approx.) : 1900 Kg Advantages of the machine: -Universal Tilting table -DRO-3 axes HEIDENHAIN -Rotary index table -Boring head -Horizontal indexing device -other accessories

weight of the machine ca.: 1.700 kg dimensions: 2000 x 1000 x 1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 720 mm y-travel: 220 mm z-travel: 450 mm table surface area: 1000x310 mm weight of the machine ca.: 1.500 kg dimensions of the machine ca.: 2000x1200x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1250 mm y-travel: 600 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 750 mm y-travel: 230 mm z-travel: 360 mm total power requirement: 5 kW weight of the machine ca.: 1.3 t required space: 1.65x1.3x2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm total power requirement: 4 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2 x 3 x 3 m No. 2456 Universal tool milling machine MAHO MH 800 Working area: 700 x 450 x 450 Drive: 4 kW Digital display Mitutojo Universal built-in rotary table 1050 x 627 mm Quill feed gear 0.02 - 2 mm/rev Spindle ISO 40, Speed range 32 - 1600 1/min, feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min Cross table movement by hand 225 mm, Table top rotation 360 ° Table swivel/tilting +- 30 ° each Space requirement approx. 2 x 3 x 3 m, Weight approx. 3.3 to. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 113 total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 222 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ISO 50 quill stroke: 150 mm turning speed range: 40 - 3600 U/min drive motor: 22/33 kW swival range +/-: 23 ° weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,811,2 m Assemblies for RAMBAUDI Rammatic 1201: 1. milling head SK 50 / 22 kw / 40 - 3,600 min-1 and: 3. 30-fold tool magazine COSTELLI 7. measuring system / glass scale Heidenhain LS 706 C / ML 2840 mm 8. measuring system / glass scale Heidenhain LS 706 C / ML 1140 mm 9. measuring system / glass scale Heidenhain LS 706 C / ML 1440 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm Control: Contour 3 / Dialog 4 total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 2,5 x 2,5 m No. 5268: Universal tool milling machine Make DECKEL, Mod. FP 2 A / 2819 with Contour 3 control unit Working area: 300 x 300 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 500 mm Control: LINUX CNC total power requirement: 9 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 x 3 x 2,7 m 2025 RETROFIT mit LINUX CNC - PC Steuerung Fixed table Full protection cabin Electronic handwheel Documentation Spindle holder SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 300 mm z-travel: 350 mm total power requirement: 3 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 222 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.