We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,257 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This HG GRIMME GSF 20/10 Milling machine was manufactured in the year 2009. It is equipped with a Siemens 840 D control unit and has 5 axis. The machine has a spindle speed of 40000 rpm.
used
This Premill V 610 B Milling machine was manufactured in the year 2015. It is equipped with a Siemens 828 D control unit and has 4 axis.
used
This AMCO-SACEM FPF1-3300 Milling machine was manufactured in the year 2000. It is equipped with an NUM 1060 control unit and has 5 axis. The machine has a spindle speed of 4-3000 rpm.
used
This Röders TEC RXU 1001 Milling Machine was built in 2017 in Germany and has 19930 hours. It is equipped with a Röders RMS6 control unit and has 3 axis. The machine has a spindle speed of 30000 rpm.
used
This SACHMAN RP3CC Milling machine was manufactured in the year 1990 in Italy. It is equipped with a FIDIA freely programmable control unit. Extension arm for copy sensor and FIDIA copy sensor are no longer available. These have been dismantled.
used
This Quick Tech T8-Hybrid-YB Turning Milling machine was manufactured in the year 2021 in Taiwan. It is equipped with a Fanuc Series Oi - TF Plus control unit.
used
This Strojtos FGS 63 NCP Milling machine was manufactured in the year 2004. It is equipped with a Heidenhain TNC 124 control unit and has 3 axis. The machine has a spindle speed of 56-2800 rpm.
used
This Rambaudi Ramfast RF105 Milling machine was manufactured in the year 2005. It is equipped with a FIDIA C10-S control unit and has 5 axis. The machine has a spindle speed of 28-24000 rpm.
used
This DECKEL FP4 60 Milling machine was manufactured in the year 1994 in Germany.
used
Table length: 1750 mm Table width: 450 mm Longitudinal X: 1340 mm Cross Y: 500 mm Vertical Z: 600 mm Make MRF 135 Type Atalaya Year 1989 Conventionel Table length (mm) 1750 Table width (mm) 450 Longitudinal X (mm)X = 1.340 Cross Y (mm)Y = 500 Vertical Z (mm) Z = 600 iso 50 / 20 Hp / 1700 3 Axis FAGOR Dro Huron type milling head
used
This Mikron Multistep XS Milling machine was made in 2008. It is equipped with a Bosch Rexroth MTX control unit. The machine has a spindle speed of 15000 rpm.
used
This MLM Ploter CNC Milling machine was manufactured in the year 2017 in Poland. It has 4 axis. The machine has a spindle speed of 18000 rpm.
used
This Deckel MAHO MH 600W Milling machine was manufactured in the year 1994.
used
Lagun FTV4-SP turret milling machine. Table: 1372x280mm. Longitudinal travel: 800mm. Cross travel: 345mm. Vertical travel: 400mm. Ram travel: 570mm. Variable speeds head. ISO40. Spindle travel: 127mm. Automatic tool holder. Slotting head. DRO Fagor for 3 axis. Weight: 1450Kgs.
used
This Deckel FP 3NC Milling machine was manufactured in the year 1988 in Germany. It is equipped with a DECKEL DIALOG 4 control unit. The machine has a spindle speed of 6300 rpm.
used
This Tornos BA 1008 Milling machine was manufactured in the year 2019 and has 3525 production hours.
used
This Brother M200X3 Milling machine was manufactured in the year 2020 in Germany. It is equipped with a Brother CNC-C00 Series control unit. The machine has a spindle speed of 10000 rpm.
used
This PRIMINER MINI Milling machine was manufactured in the year 2021 in China. It is equipped with a SIEMENS SINUMERIK 828D control unit. The machine disposes of a spinde which has 10000 rpm and 3 axis.
used
This EMCO HYPERTURN 65 PM CNC turning milling center was manufactured in the year 2019 and has 13650 production hours. It is equipped with a SIEMENS control unit. The machine has a spindle speed of 12000 rpm.
used
This DECKEL MAHO DMU 70VL Milling machine was manufactured in the year 2000. It has 5 axis and a table size of 700x500 mm. The machine has a spindle speed of 20-12000 rpm.
used
This DEPO HF milling machine was made in the year 2012 and has 7 axis. The Stable 7-axis machine is specially developed for the manufacture of tools, molds and matrices.
used
This ANAYAK VH-Plus-3000-N milling machine was built in the year 2001 in Spain. It is equipped with a Heidenhain 426 control unit and has 3 axis. The machine has a spindle speed of 3000 rpm.
used
This Deckel Maho DMC 100V Milling machine was manufactured in the year 1996. It is equipped with a DECKEL MAHO DIALOG 112 control unit and has 3 axis.
used
This Jobs Jomach 16 Milling machine was manufactured in the year 1992 in Italy and has 58530 production hours, of which 17128 are spindle hours. It is equipped with a Heidenhain iTNC 530 control unit and has 6 axis. The machine has a spindle speed of 12000 rpm, is in good condition, and is well maintained.
used
5-axis milling machine Mecof DGT 2000 :::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC version: 901 - ONE Head Type: Fork Head Additional technical notes for the head: Continuously controlled head Axis A +- 100° Axis B +- 185° Tool connection: iso 40 Spindle power: 15Kw Number of spindle revolutions: 10000 Number of tools: 10 X Axis Travel: 5000mm Y Axis Travel: 1200mm Z Axis Travel: 2000mm Rapid linear axis feeds X Y Z: 20m/min Other technical data: machine completely overhauled in 2015 Continuous new head Machine equipment: Interesting supply conditions
used
Specifications: - Table size 950 x 450 mm - Working range of the axes - X (longitudinal) 560 mm - Y (transverse) 320 mm - Z (vertical) 400 mm - distance milling spindle – angle table 510 mm - Tool holder SK 40 - Working spindle speeds adjustable in 18 stages 25 - 2000 rpm - Drilling spindle stroke 100 mm - Feed speed of the axes up to 1200 mm/min - Rapid traverses - Drive 400 V / 3 kW - Space requirement approx. W 1200 x H 1650 x D 1000 mm - Weight approx. 1700 kg - with : - 3 A. – Digital display - Coolant device - fixed angle table
used
This DMG Mori Milltap 700 Milling machine was manufactured in the year 2012 and has 16240 production hours, of which 7478 production hours. It is equipped with a SIEMENS SINUMERIK 840 D control unit. The machine has a spindle speed of 10000 rpm.
used
Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg
used
This HAAS VF2 milling machine was made in the year 2019 in the United States. It is equipped with a Haas control unit. The machine has a spindle speed of 8100 rpm.
used
This ZAYER KP 6000 AR Milling machine was manufactured in the year 2002 in Spain and has 48852 working hours. It is equipped with a FIDIA C1 control unit and has 5 axis. The machine has a spindle speed of 5500 rpm.
used
This QUICK-TECH Q5 Milling center was manufactured in 2018 in Taiwan. It is equipped with a Mitsubishi M80 control. This turning machine has a table size of 620 x 420 mm with a max. table load of 250 kg. The clamp type is BT30. The machine is still under power and can be inspected at any time. There are 4 units available of the same model and YOM at the same location.
used
Machine Details Warehouse number 1105-03591 Machine type bed milling machine - Universal Brand KIHEUNG Type KMB 3 Year of construction 2012 Control type NC Control HEIDENHAIN TNC 124 Storage location FRANCE Country of origin KOREA Delivery time immediately Freight base from stock, freely loaded Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Speed 15 - 2000 1/min Spindle 9 kW Recording ISO 40 Control HEIDENHAIN TNC 124 Table size 1,700 x 470 mm Table load 2 t Rapid traverse longitudinally and transversely 10 m/min Rapid traverse vertical 4 m/min Total power requirement 18 kVA Machine weight approx. 6.5 t Information UNIVERSAL HURON HEAD HEIDENHAIN TNC 124 ISO 40 HOLDER 10 STUCCO Manuals
used
I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.
used
This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.
new
bore capacity in steel (diameter): 25 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK 2 spindle turning speed range: 50 - 3000 U/min : 280 mm : 155 mm table surface area: 500 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,8 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Half round milling cutter, see picture for description Approx. Onsite Dimension. (l x w x h): 200 x 100 x 100 mm, weight approx.: 2 kg
used
DYE FPF-2C-NC Milling Machine Measurements: 11200 x 5800 x 6300 mm
used
Universal tooling and production milling machine Hardened slides Strokes: X850mm, Y340mm, Z500mm Visualization on 3 axes Fast on all 3 axes Variable spindle and feed speeds Quick tool change system
used
Characteristics: Mobile gantry milling machine, serial number Work Area: 6300 X 2400 X 600 (Max Stroke) Max Work Feed: 2000 mm/min Max Rapid Feed: 4000 mm/min Accessories: Nose: Max RPM: 2000 Manually positioned head Control: Heidenhain (Atek Hs Plus
used
Mobile column milling machine Working area: 4000 x 1000 x 2000 (max stroke) Max work progress: 2000 mm/min Maximum rapid feed: 7000 mm/min Accessories: ▪ nose cone: max rpm: 2000 Control: class m fidia
used
Notching milling machine make GRAULE type AKF 2Year of construction 1986Technical specifications:Shaft diameter (cutter holder): 40 mmMilling cutter diameter max .: 250 mmMilling cutting width: 8.0 mmProfile height max .: 80 mmMilling width up to: 320 mmMilling depth: 72 mmDrive motor: 380 V, 2.2 kWWeight approx: 80 kgDimensions approx: 1100 x 800 x 600 mm- without baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC Milling Machine Fabr. TOS CELAKOVICE Type FNG 32 NCMash. -No: 7200075Table longitudinal path X: 600 mmUpper arm lateral travel Y: 400 mmTable perpendicular path Z: 400 mmSpindle mount: ISA 40stepless speeds: 10 - 3150 rpm.stepless feed rates in 3 axes: 1 - 9000 mm / min.Weight approx: 2.6 tDrive power: 10 kVAWith- CNC control Heidenhain TNC 155- rigid angle tablelittle usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal engraving and copy milling machine make DECKEL type GK 21Machine -No: 56 974Worktable clamping surface: 200 x 350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm
used
Vertical Milling Machine Fabr. BOHLE type FS 15Year of construction 1974Table size: 1400 x 420 mmSpindle mount: ISA 50Distance spindle to stand: 400 mmSpindle speeds: 27 - 1400 rpm.Feed rates stepless: 8 - 3150 mm / minDrive power: 11 kWDimensions L x W x H approx: 2200 x 2000 x 2200 mmWeight approx: 3500 kgWith- Control pendulum- swiveling head- rapid traverse and creep speedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Vert. Milling machine make RAMBAUDI type RAMM MILL 10Machine -No: 342 Year 1973Table length X: 1200 mmCross table Y: 510 mmTichsenkrechtweg Z: 550 mmTable size: 1460 x 400 mmTable load max .: 1500 kg3 aut. Pinolenvorschübe: 0.035 / 0.07 / 0.15 mm / U.Rapid traverse: 2500/1250 mm / min.Stroke: 150 mmDrive power: 7.5 kWWeight approx: 5.0 tOutside dimensions approx: 2400 x 2135 mmWith- aut. Tool clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Universal milling machine make UNIMAC type FM 1Machine -No: 4193Working surface of the fixed box table: 600 x 240 mmLongitudinal movement: 300 mmVertical movement: 200 mmTransverse movement: 350 mmSpindle mount: ISO 40 / Morse 417 automat. Feeds: 10 - 208 mm / min12 spindle speeds: 63 - 1200 rpm.Drive power: 1.1 / 1.9 kWDimensions L x W x H: 1160 x 1180 x 1800 mmWeight approx: 750 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
No. 5100: 1 gebr. Vertical milling machine Fabr. FRITZ WERNER, type FV 2
used
Equipped with aluminum case, 66-piece milling set
used
Maho MH 600 Universal Milling Machine Specification Manufacturer Maho Type MH600 Year. Unb. Axis displacement X-axis 400 mm Y-axis 210 mm Z-axis 300 mm Main spindle speed 20 - 4000 rpm Tool holder ISO-40 Extras Vertical head with pinole Various tool holders Universal table Digital display 2-axis Machine documentation Coolant set.