127,239 used machines on RESALE, but how to find them? Machine Search
Make: RIJVA Model: 502/1 S/N: 405 Cap: 12 tons
sheet width: 300 mm plate thickness: 2,5 mm distance between columns: 300 mm diameter of upper rolls: 32 mm total power requirement: Handbetrieben weight of the machine ca.: 15 Kg dimensions of the machine ca.: 500 x 300 x 150 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz
material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Loma Combination IQ3 metal detector and CW3 check weigher 250 x 90mm aperture. 200mm conveyor width. 360mm weigh pad width. 2100mm machine length. 920mm line height with adjustable feet. M&S Spec machine.
350 x 200mm aperture. 300m conveyor width. 1.8m long. Push reject system. Right to left production. Full supermarket spec. 880 Line height with adjustable feet.
550 x 160mm aperture. 400mm conveyor width. 3250mm machine length. 900mm line height with adjustable feet. New belt fitted on the machine. Right to left production. Full supermarket spec.
450 x 160mm aperture. 300mm conveyor width. 1800mm machine length. 870mm line height. Left to right production.
350 x 115mm aperture. 300mm conveyor width. 1.3m machine length. Air reject system. 1.3m machine length. Adjustable line height with wheels.
370 x 160mm. 310mm width conveyor. 760mm line height with adjustable legs. 1200mm long. Left to right production. Ferrous in foil.
350x100mm aperture. 280mm conveyor width. 900mm line height, adjustable legs. Left to right production. Air or push reject system. 2300mm total machine length.
370 x 100mm aperture. 300mm conveyor width. Right to left production. Reject system. M&S Spec. 2100mm long 840mm line height with adjustable feet.
Metal band saw blade, band saw blade, metal saw band -unused, original packaging -Number: 4 sheets available Price: per piece -Tooth pitch: 4 TPI -Dimensions: 5990 x 34 x 1.1 mm
metal band saw blade, band saw blade, metal saw band -unused original packaging -Number: 10x sheets available -Price per piece -Toothing: 5 -Dimensions: 3660 x 26 x 1.1mm -Weight: 0.7kg/pcs
300x160mm aperture. 250mm conveyor width. Left to right production. Supermarket spec. 900mm line height with adjustable feet. 2600mm machine length. Full electrical rebuild completed.
350 x 130mm aperture. 870mm line height. 1600mm machine length. Supermarket spec. New belt and reject system. Left to right production.
Metal band saw blade, band saw blade -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm
Metal band saw blade, band saw blade -unused original packaging -Number: 5x sheets available -Price: per piece -Toothing: 5/8 ZpZ W -Dimensions: 2950 x 27 x 0.9 mm -Weight: 0.6 kg
Metal band saw blade, band saw blade -unused -Number: 7x sheets available -Price: per piece -Toothing: 6/8 -Dimensions: 4570 x 41 x 1.7 mm
Usable aperture – 355mm x 160mm. Conveyor width – 300mm. 1.5m long. 90cm high. Left to right production.
Usable aperture size 360mm (wide) x 110mm (high). 300mm wide conveyor belt. Full length 2,500mm. Line height 900mm. Stop on detection. Left to right production direction.
Metal band saw blade, band saw blade, metal saw band -Metal saw band: 34 x 2 mm, unused -Length: 3800 mm -Weight: 1.2 kg
Usable aperture size 350mm (wide) x 135mm (high) 230mm wide conveyor belt Full length 2500mm Line height 850mm Auto push reject on both machines. Left to right production direction
350 X 110mm usable aperture. 260mm conveyor width. 920mm line height. Twin head metal detector with reject. M&S Spec. Right to left production line.
Usable aperture size 550mm (wide) x 200mm (high) 450mm wide conveyor belt Full length 2000mm Line height 860mm Right to left production direction
450 x 130mm aperture size. 320mm wide conveyor belt. Checkweigher table width 390mm. Air blast reject system. 2200mm machine length. 900mm line height.
250 X 155mm aperture. 190mm conveyor width. Air reject system. 1030mm Line height. Left to right production direction. M & S Spec.
450 x 155mm aperture 400mm conveyor width. 920mm line height with adjustable feet. 1800mm machine length. Right to left production. Drop reject system.
metal band saw blade, band saw blade, metal saw band -Manufacturer: Eyltool, metal band saw M42 unused -Type: M42 2060x20x0.9 ZpZ 8/12 -Number: 10x metal saw band available -Price per piece -Transport dimension: Ø 230 / 40 mm -Weight: 0.3kg/pcs
355 x 200mm aperture. Usable aperture of 155mm. Conveyor width of 300mm. 850mm line height with adjustable feet. 475mm weigh pad length. Right to left production. M&S spec machine.
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, bi-metal saw band M42 unused -Type: Biflex Kobali M42 3660 x 25 x 1.5 mm -Quantity: 5x sheets available -Price per piece -Transport dimensions: Ø 410 / 50 mm -Weight: 0.7kg/piece
Metal band saw blade, band saw blade, metal saw band -Metal band saw blade: saw band unused -Type: 4125 x 26 x 1.5mm -Quantity: 3x sheets available -Price per piece -Transport dimensions: Ø 450 / 40 mm -Weight: 0.8 kg/piece
80 x 160 mm aperture. 80mm wide conveyor belt. 1730mm machine length. 830mm line height. Auto push reject. Left to right production.
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Wikus, 10 pieces of bi-metal saw band M42 unused -Type: Biflex Kobali M42 3700 x 25 x 1 mm -Quantity: 10x sheets available -Price: complete -Transport dimensions: 800/700/H30 mm -Weight: 8.2 kg
sheet width: 1050 mm plate thickness: 1,8 mm pre-bending: 1,5 upper roll diameter: 70 mm min. dia.: 105 mm total power requirement: 1,1 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1700x700x1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg
450mm W x 200mm H Right to Left Conveyor Width 400mm Conveyor Height 840mm Stop on detect Overall length - 1950mm
Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg
4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.
Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts
Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Bayerwald, metal band saw M42 unused -Type: M42 2480x27x0.9 8/12 -Quantity: 1x metal saw band available -Transport dimensions: Ø 280 / 55 mm -Weight: 0.5 kg/piece
MF-25 Corner Forming Machine
Jeros 6015 TRAY CLEANING MACHINES
Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750
Metal band saw blade, band saw blade, metal saw band -Manufacturer: Holex, Bi-metal saw band unused -Type: 173605 5/8 -Length: 2710 mm -Number: 7 sheets available -Price: per piece -Transport dimensions: Ø 300 x 40 mm -Weight: 0.5 kg/piece
maximum number of results exceeded
please refine your search
