milling machine deckel used for sale

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWClamping System HSK-A 63Spindle taper HSK-A 63Speed range - 20000 rpmTorque (40% DC) 130 NmTorque (100% DC) 86 NmDrive power (40% DC) 35 kWNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 30 pockets HSK-A63Tool magaz ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Cross420 mmLongitudinal700 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 15000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmDrive power (40% DC) 8,5 kWToolchangertoolchangerType of magazine WheelNumber of tools 25Integrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software packageProduction package band filter ICS 40b ...

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

Various CNC and conventionally controlled milling machines, make Fritz Heckert, are available. 1) Fritz Heckert FU 315/E, weight: approx. 4000kg. 2) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 3) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 4) Fritz Heckert FU 315 2/PS, weight: approx. 3900kg. 5) Fritz Heckert FU 315/E, weight: approx. 3200kg. 6) Fritz Heckert FW 400/E, weight: approx. 3700kg. 7) Fritz Heckert FU 315 x 12. 8) Fritz Heckert FU 315, weight: approx. 3100kg. An on-site inspection is possible.

Circular Saw Milling Machine KNAPP KFS Profi T -used-format sliding carriage, with boom table, circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, finely adjustable milling stop---------- Technical data ----------Format sliding table Cutting length: 2,000 mm, cutting height: 103 mm, cutting width: 700 mm, max. saw blade Ã: 315 mm, swivel range circular saw: 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 45 Â, milling machine speeds: 2,850, 4,000, 7,800 rpm,

HELLER H 2000 CNC horizontal machining center was built in 2022 by Heller Maschinenfabrik GmbH. The machine represents the fourth generation of the H series, specially designed for use in demanding production conditions. It is distinguished by its extensive equipment and the use of a number of state-of-the-art technical solutions that ensure reliable operation throughout its service life. The HELLER H 2000 is used for precise, 4-axis machining of workpieces with a maximum weight of 800 kg. The design of the machine provides the foundation for high productivity and machining accuracy. All structural components made of cast iron have been carefully topology optimised to ensure the highest stability and excellent force damping. Kinematics in all 4 axes, in turn, allows precise positioning of the tool in relation to the workpiece. Movement in the X-axis is carried out by a column, which s ...

Manufacturer: Torusmill Model: TM-100 Year: 2004 The cooling circuit is not included Technical Specifications - Tank Volume: 100 L - Grinding Material Capacity: 40 - 70 L - Grinding Basket Volume: 4.3 L - Bead Fill Level 50%: 2.135 L - Main Motor Power: 15.0 kW - Motor Speed: 0 - 3,000 rpm - Shaft Speed: 100 - 2,000 rpm - Power Supply: 3 x 400 V / 50-60 Hz - Fusing: 3 x 50 A, 2 x 2 A - Total Weight: approx. 1,000 kg Find more here - / Contact us at -

It is a BIESSE Rover A1232 5-axis horizontal milling machine and a BIESSE Skill 15.36 G FT 3-axis horizontal milling machine.

Manufacturer: Hurco Model: VMX1 Year of manufacture: 2004 Type of Machine: CNC milling machine Control unit: Hurco Ultimax Spindle taper: SK 40 Spindle speed: max. 10,000 rpm Milling feed: max. 11,400 mm/min Table size: approx. 760 × 355 mm Travel distances: X 660 mm / Y 355 mm / Z 455 mm Tool changer: 16 positions Motor power: max. 13 kW Weight: approx. 3,400 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - chip conveyor - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

Manufacturer: Hurco Model: VMX24i Year of construction: 2021 Type of Machine: CNC milling machine Controller: Hurco Max 5 Spindle taper: SK 40 Spindle speed: max. 12,000 rpm Working feed rate: max. 38,000 mm/min Table size: approx. 760 × 510 mm Travel distances: X 610 mm / Y 508 mm / Z 610 mm Tool changer: 30 positions Machine power: max. 19 kW Weight: approx. 4,750 kg Condition: - Used (like new), very good overall condition - Fully functional and ready for use Equipment / Accessories: - High-pressure cooling system for coolant supply through the spindle (20 bar) - Cooling air via coolant nozzles or through spindle - Workpiece position detection with 3D probe - Tool measurement using touch probes - Chip conveyor (scraper belt conveyor) - Machine vises - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon req ...

Manufacturer: Mikron Model: UME600 Year of manufacture: 1995 Type of Machine: CNC milling machine Control unit: Heidenhain TNC407 Spindle taper: SK 40 Spindle speed: max. 5,000 rpm Feed rate: max. 10,000 mm/min Table size: approx. 900 × 530 mm Travel paths: X 600 mm / Y 500 mm / Z 450 mm without automatic tool changer Motor power: max. 9 kW Weight: approx: 3,200 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

Offered is a horizontal knee-type milling machine: Table clamping surface X/Y: 300mm/1250mm, travel X/Y/Z: 800mm/275mm/400mm, table load: approx. 250-300kg, T-slots: 3pieces/18mm width/63mm spacing, spindle mount: ISO40 (steep taper40), spindle speeds: 12steps, speed range: 45-2000rpm, feed range (longitudinal/transverse): 14-900mm/min, feed range (vertical): 4-250mm/min, machine weight max.: approx. 2400kg, machine dimensions X/Y/Z: approx. 2000mm/1700mm/1700mm. Inspection possible by appointment.

Key data: 250 mm

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Sales Description ------------------- This compact CNC spindle unit comes from a precision milling machine and has been fully refurbished, including complete replacement of all bearings. With a total length of 221 cm and a robust construction designed for reliable industrial use, it is ideal for machine builders, retrofit projects, and users seeking a ready-to-install spindle for small to medium CNC applications. The spindle is stored in our warehouse in Bavaria, Germany, and is available for immediate shipment. Transport can be organized by IBA - costs have to be covered by the customer. Further information can be seen in the datasheet attached as PDF-File --------------------------------------------------- Sales description This compact CNC spindle unit comes from a precision milling machine and has been completely overhauled, including the complete replacemen ...

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect.

Top maintained MAHO MH 500 M Immediately available from location without accessories shown x-travel 500 mm y-travel 380 mm z-travel 350 mm Control Maho 134 Main spindle: Speed range - main spindle 63 - 4,000 rpm/-1 Drive power - main spindle 3 kW Gear stages 2 Tool holder SK 40 Quill stroke 50 mm You can swivel it. h/v Work table: Table clamping area 800 x 360 mm T-slots 14H7 - 5 / 63 max. table load 200 kg Feeds: Feed speed 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ) 4 / 2 / 4 m/min Total power requirement 5 kW Machine weight approx. 1.6 t

Offer 26051 Technical data: - Feed of the milling unit manually - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - max. Milling height 150 mm - max. Milling depth 110 mm - max. Milling length 500 mm - Angle-adjustable stop Li + Re 20 - 90 ° - Milling spindle speed 2800 rpm - Drive 400 V 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle 10 l - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1300 x H 1450 x D 1100 mm - Weight approx. 300 kg

TOS KURIM FNK 25A vertical milling machine was built was built in the Czech Republic by TOS KUŘIM – OS, a.s. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as precise drilling and milling of workpieces with a maximum weight of 200 kg. The machining process is performed by a reliable spindle, moving in three axes X,Y,Z with feed of 800 mm, 370 mm and 450 mm respectively. The spindle speed is adjustable from 56 to 4500 rpm, enabling precise adjustment of the parameters to the type of workpiece. The TOS KURIM FNK 25A also enables machining at various angles, thanks to its tiltable workhead. All this is complemented by a compact yet extremely rigid design that perfectly dampens any vibrations and ensures maximum process stability during even the most intensive challenges. All of this makes the TOS KURIM milling machine  ...

x-travel: 4.000 mm y-travel: 1.200 mm z-travel: 2.000 mm Control: HEIDENHAIN iTNC 530 HSCI total power requirement: 40 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 10,2 x 5,3 m High-performance CNC bed milling machine MTE BF 4200 equipped with HEIDENHAIN iTNC 530 control, ideal for precise machining of large and heavy workpieces up to 13,000 kg. The machine offers generous travels (X: 4,000 mm, Y: 1,200 mm, Z: 2,000 mm), a universal swivel milling head, and a 60-position tool changer. Fully refurbished, the machine is in very good technical and visual condition and ready for immediate operation. • Machine bed, column, and vertical saddle: cast construction, stress-relieved • Milling slide: cast construction • Universal milling head, positioned via Hirth splines, front plane 2.5°, rear plane 2.5° • Oil cooling unit for cooling the main gearbox • Spindle dr ...

Key data: 4 mm, 3 mm, 1 mm

5-axis CNC gantry milling machine FPT Dinospin Year of construction 2022 Heidenhain TNC 640 Controller Table size 4,000 x 2,500 mm Gantry longitudinal travel X 4,000 mm Cross path Y 2,500 mm Perpendicular travel Z 1,300 mm Feed and rapid traverse speed X,Y,Z 40,000 mm/min 2-axis NC swivel milling head C-axis +/- 270° A-axis +/- 185° Spindle drive power 22/33 kW Speed range 10 ~ 18,000 rpm Tool holder HSK-A63 120-fold tool changer Electronic handwheel with radio control Manual clamping of the milling head on the machine ram Direct tapping Dynamic RTCP (head programming without shifting the zero points) Automatic calibration system AUTOCAL Sensor for detecting abnormal vibrations Tool measurement and tool breakage detection using laser Workpiece probes Internal cooling 40 bar External cooling 10 bar Coolant gun Operating mo ...

Bridgeport Interact 1 CNC Milling Machine Type: CNC milling machine Manufacturer: Bridgeport Model: Interact 1 X-axis travel: 457 mm Y-axis travel: 305 mm Z-axis travel: 365 mm T-slot table size: 410 x 1065 mm Speed range: up to 4000 rpm Machine weight: 1600 kg Dimensions (L x W x H): approx 1700 x 1300 x 2300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-19

Knuth UFM 10V Universal Milling Machine Type: Universal milling machine Manufacturer: Knuth Model: UFM 10V X-axis travel: 1300 mm Y-axis travel: 290 mm Z-axis travel: 450 mm T-slot table size: 320 x 1600 mm Workpiece weight max.: 450 kg Dimensions (L x W x H): approx. 1800 x 1500 x 2200 mm T-slots, width: 18 mm T-slots, spacing: 80 mm Upper slide travel: 550 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-14

A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.

BACCI MOA model oscillating mortiser, with 1 table and 1 bit. Not CE compliant, for export

BACCI MOA model oscillating mortiser, with 1 table and 1 bit. Not CE compliant, for export

Accurate and adjustable sharpening system; fine adjustment of cutting angles; adjustable worktable Auction-ID: A1-45225-35

CONTROLS   CNC controls NUM 1060 M WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 2   X-axis travel: 3000 mm   Y-axis travel: 2010 mm   Z-axis travel: 2000 mm   rotating range A-axis from: 92.5 °   rotating range C-axis up to: 360 ° TABLE   table surface (left-right): 1450 mm   table surface (front-back): 1600 mm FLOOR PLATE   total weight approx.: 12000 kg SPINDLE / HEAD   spindle revolutions (max): 3000 /min   tool fixture: ISO SK 50   drive power: 37 kW AXIS DRIVES   traverse velocity X (max): 25000 mm/min   traverse velocity Y (max): 25000 mm/min   traverse velocity Z (max): 25000 mm/min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENT ...

X-axis: 425mm, Y-axis: 400mm, Z-axis: 240mm, Spindle speed: 42000rpm, Probe: Renishaw, Number of tools: 40, Spindle interface: HSK40, with paper filter. An on-site inspection is possible.

X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible.

One-hand milling machine MAKITA 3708 FC built in 2013, 500 W

Flat dowel cutter / groove cutter BOSCH GUF 4-22 A, 620 W

A deposit of €250.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-5

A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-4

A deposit of €450.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Max tool diameter 100 mm Max tool length 300 mm Max tool weight 10 kg Cutting speed 5000 mm/min Fast feed speed 15000 mm/min Tables, utensils and accessories included Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-6

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Dovetail milling machine / grooving cutter HOFFMANN MU 2, S/N 11971

Edge milling machine on trolleys see pictures Condition: unchecked (6) Auction-ID: A7-45761-816

5-axis gantry milling machine Fooke Endura 905 linear Year of manufacture 2007 Control Siemens 840D CNC Table size: 5,000 x 3,000 mm 2-axis NC swivel milling head: A-axis +95°/-120° (0.001°) degrees C-axis +/- 275° (0.001°) degrees Distance between uprights: 4,700 mm Distance spindle - table: 1,419 mm Travels: X 5,000 mm Y 3,000 mm Z 1,500 mm Linear motors for fast feeds : X/Y/Z 65,000 mm/min. Rapid traverses: X/Y/Z 65,000 mm/min. Spindle drive power: 28 kW Spindle speeds: max. 18,000 rpm Spindle torque: max. 89 Nm Tool holder: HSK-A63 Tool positions: 20-fold autom. Tool Changer Machine weight: approx. 95,000 kg Space requirements: L x W x H 8,850 x 9,370 x 6,200 mm Accessories: Full fairing 3 x chip conveyor CNC control on swivel arm Protective covers for drives and s ...

For sale is a high-quality universal tool milling machine from the renowned Swiss manufacturer Mikron, model WF 2 SA. The machine impresses with its high precision, stable construction and versatile applications and is in a well-maintained and functional condition. Ideally suited for toolmaking, single part production, repair work and training companies. General information: Machine Type: Universal Tool Milling Machine Manufacturer: Mikron Model No.: WF 2 SA Year of construction: approx. 1985 Condition: Used, well maintained, fully functional Availability: Immediately available Technical data: Travel (X/Y/Z): approx. 420 / 250 / 340 mm Table size: approx. 635–700 × 250 mm Spindle speed: 50 – 2,240 rpm Tool holder: SK40 (ISO 40) Feed: infinitely variable Rapid traverse: approx. 1,400 mm/min Motor power: approx. 3.5 kW Machine data: Weight: approx. 1,0 ...

A Graule notching machine and a Rotox copy milling machine are available. 1) Graule AS 450 notching machine, year of manufacture: 1994, saw blade diameter: 350mm/450mm, bore: 40mm, speed: 2800rpm, max. notching dimensions X/Y/Z: 250mm/110mm/153mm, weight: approx. 400kg. 2) Rotox KF 347 copy and lock milling machine, year of manufacture: approx. 1992, speed: 12000rpm, machining dimensions X/Y/Z: 315mm/130mm/200mm, max. workpiece cross section X/Y: 200mm/100mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1650mm, weight: approx. 350kg. An on-site inspection is possible.

Speed: 355-1800/min, nominal voltage: 380V, 50Hz, 3 AC, control voltage: 220/24V, protection class: IP54, nominal current: 100A, control: Heidenhain TNC 355, weight: 2.95t, with handwheel, coolant system, hose nozzle, hydraulic/lubrication unit, pressure accumulator/ hydraulic accumulator, solenoid valves, Bosch components and ORSTA directional control valve. An on-site inspection is possible.

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Excellent condition - Fully operational - Loading / Transport possible! Minimum diameter : 5 mm Maximum diameter : 80 mm Minimum length : 350 mm Maximum lenght : unlimited Productivity : 1/13 mt./min Tool rotation motor : 5,5 Kw Gear motor : 0,75 Kw Motors voltage : 400V/50 Hz

AVIA FNE 40P – Universal milling machine built in 2014 Highlights • Year of construction 2014 • Model AVIA FNE 40P • 3-axis digital display ARBAH-M • Tool holder SK 40 • Rotatable milling head • Without vertical milling unit • Closed work area • Coolant system • Machine weight approx. 2000 kg Technical data • Travel distances: 3 axes (X, Y, Z) • Table dimensions: approx. 800 x 400 mm • Max. tool diameter: 125 mm • Max. tool weight: 6 kg • Machine dimensions: approx. 2300 x 2100 x 2100 mm • Machine weight: approx. 2000 kg Equipment • Protective cover with viewing window • Control panel • Machine lighting • Emergency stop switch Auction-ID: A7-45863-1

Machine type: Universal milling machine Manufacturer: ALCERA (AMSTUZ / LEVIN) Model: 6S Year of manufacture: 1979 Table size: approx. 1100 x 265 mm Longitudinal travel (X): approx. 700 – 800 mm Cross travel (Y): approx. 200 – 250 mm Vertical travel (Z): approx. 400 mm Spindle: Horizontal spindle with vertical milling head Spindle taper: ISO 40 Spindle speed: approx. 30 – 1000 rpm (multi-stage gearbox) Feed: Mechanical feed on X/Y/Z axes Control: Heidenhain digital readout (3-axis DRO) Condition: Used, visible signs of wear and chips Remarks: Robust conventional milling machine suitable for toolroom and general machining; equipped with digital readout for improved positioning accuracy Approx. own mass: 1800 – 2200 kg Approx. dimensions (LxWxH): 2000 x 1800 x 1800 mm Auction-ID: A7-45364-9

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgTool changerTool changer planevertical Type of gripperDouble gripper Number of tools90 Max. tool length370 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinPackage Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Table plate C-axis d 680 mm / 26.8 in Speed C-axis 1.000 min-1 Integrated balancing sensor Motor spindle speedMASTER® HSK-A63 Spindle speed 20 ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degreeDirect measuring systemDirect path measurin ...

Steinel SH4 milling machine. Good condition. With lots of accessories. The machine runs and does what it is supposed to.