136,885 used machines on RESALE, but how to find them? Machine Search
turning diameter: 390 mm turning length: 2250 mm control: Sinumerik 840D swing diameter: 610 mm cross movement. (x-axis): 605 mm longitudinal traverse (z-axis): 1.870 mm y-axis: 210 mm b-axis: 240 ° Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mm Longitudinal travel (Z3): 1.840 mm main spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: max 82 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 82 mm Diameter in front bearing: 180 mm Counter spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: 92 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 104 mm Diameter in front bearing: 180 mm Main spindle drives left and right: - power requirement: 45/47 kW speed area: 20 - 3.200 1/min Buckling speed: 650 1/min torque: 650/ 1.080 Nm C-axis speed: 3.200 1/min Torque C-axis: 660 1/min Partial ...
Offered is a Hurco CNC vertical machining center including spare parts. Travel X/Y/Z: 1270mm/660mm/610mm, table dimensions X/Y: 1500mm/660mm, max. table load: approx. 1360kg, spindle speed: 10000rpm, spindle taper: SK40, main drive power: approx. 18.5kW, tool pockets: 24, feed X/Y: 30m/min, feed Z: 20m/min, rapid traverse X/Y: 30m/min, rapid traverse Z: 20m/min, spindle operating hours counter: approx. 7676h, control: Hurco Ultimax. Machine dimensions X/Y/Z: approx. 3300mm/2800mm/3000mm, machine weight: approx. 9000kg. Inspection possible by arrangement.
X-axis: 880 mm, Y-axis: 630 mm, Z-axis: 630 mm, table dimensions: 1250 × 700 mm, table load capacity: approx. 500 kg, B-axis (milling head): manually or NC swiveling up to 103°, maximum spindle speed: 12,000 rpm, power: 15 kW, torque: 130 Nm, tool holder: SK 40, tool magazine capacity: 32 positions, control system: Heidenhain TNC 430 MillPlus, length: 4073 mm, width: 3323 mm, height: 2375 mm, weight: approx. 9.5 t. An on-site inspection is possible.
Manufacturer: Toyoda (machining centers), Palltec (RGV) Type of System: Horizontal machining centers with matrix tool magazines and RGV pallet handling Year of Manufacture: 2006 to 2008 MACHINING CENTERS Toyoda 1 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 72,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 2 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 70,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 3 - Type: FH 630 SX - Year of Manufacture: 2007 - Control: Fanuc 31i - Spindle running time: approximately 76,000 hours - Tool magazine: Fanuc FTS330, 330 tool positions Toyoda 4 - Type: FH 630 SX - Year of Manufacture: 2008 - Control: Fanuc 31i - Spindle running time: approximately 65,000 hours - Tool magazine: Fanuc FTS3 ...
Control Brother C-00 Travel X/Y/Z: 650 x 400 x 435 mm 2-fold pallet changer 800 x 400 mm Spindle speed: 16,000 min-1 Tool magazine for 40 Wkz., BT 30 IKZ 70 bar 3D probe OMP 40 Electronic handwheel Chip conveyor
The machine is in good technical condition; it can be tested by prior arrangement.
A vertical CNC machining center DMG is offered. Travel X/Y/Z: 635mm/510mm/460mm, spindle-to-table distance: 120mm-580mm, table size X/Y: 790mm/560mm, table height: 720mm, max. table load: 600kg, feed rate X/Y/Z: 20m/min, rapid traverse X/Y/Z: 25m/min, max. feed force: 5kN, max. spindle speed: 8000rpm, max. spindle power: 18.9kW, max. torque: 100Nm, tool holder: SK40, tool magazine: 20 positions, max. tool diameter: 80mm, max. tool length: 250mm, max. tool weight: 6kg, tool change time: 1.6s, control: Heidenhain iTNC 530, total power-on hours: approx. 25232h, spindle running hours: approx. 8801h. Inspection possible by appointment.
vertical machining center, year 2004, CNC TNC 530. Used machine. More info & price on IndustrialBuyer.
vertical machining center, year 2015, CNC 0i-MD. Used machine. More info & price on IndustrialBuyer.
A Fanuc CNC drilling and machining center is available. Travels X/Y/Z: 700mm/400mm/330mm, spindle-to-table distance: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, spindle speed: 24000rpm, spindle power: 5.5kW, torque: 7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool positions: 21, tool interface: BT30, positioning accuracy: 0.006mm, repeatability: 0.004mm. Machine dimensions X/Y/Z: approx. 2200mm/1950mm/2200mm, weight: approx. 2500kg, control: Fanuc 31i-B5, power-on hours: 6534h, operating hours: 473h. Documentation available. An on-site inspection is possible.
Key data: 760 mm, 510 mm, 570 mm
Inv. Num. : 9328 Type: ACE VC 500 Producer: DAEWOO Created: 2005 Parameters: Control System: FANUC Series 21i-MB Work table length: 860 mm Work table width: 560 mm Maximum table load (even): 300 kg Spindle drive power: 15 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 760 mm Y-axis travel: 510 mm Travel Z axis: 570 mm
A Toyoda CNC horizontal machining center is available. X/Y/Z travel: 750mm/800mm/850mm, table dimensions X/Y: 550mm/550mm, spindle speed: 15000rpm, tool interface: SK40, tool magazine capacity: 60, weight: approx. 16000kg, power-on hours: 133870h, operating hours: 25394h, feed hours: 12802h. Including chip conveyor, 4th and 5th axis, and Knoll KF 400/2250. Documentation available. An on-site inspection is possible.
A Fanuc CNC drilling and machining center is available. Travel X/Y/Z: 700mm/400mm/330mm, distance from table to spindle nose: 180mm-580mm, table dimensions X/Y: 850mm/410mm, max. table load: 300kg, max. spindle speed: 10000rpm, spindle power: 26kW/5.5kW, torque: 35Nm/7.5Nm, feed rate: 30m/min, rapid traverse: 54m/min, tool stations: 21, tool interface: BBT30, positioning accuracy: 0.006mm, repeatability: 0.004mm, machine dimensions X/Y/Z: 2150mm/2050mm/2350mm, weight: approx. 2100kg, control: Fanuc 31i-B5, operating hours: approx. 9547h. Including chip conveyor and coolant tank. Documentation available. An on-site inspection is possible.
UNIT 1 - Weeke Profiline ABL 210 - Manufacturer: Weeke - Model/Type: Profiline ABL 210 - Year of manufacture: 2007 - Made in Germany - Power: 17 KW - Voltage: 400 V - Frequency: 50 Hz, 3 phase + N - Current: 35 A - Control voltage: 24 V UNIT 2 - Ligmatech MDE 110 loading system - Manufacturer: Ligmatech - Model/Type: MDE 110/28/08 - Year of manufacture: 2007 - Made in Germany - Voltage: 400 V - Frequency: 50 Hz, 3 phase + N - Current: 12 A - Fuse: 25 A - Control voltage: 24 V - Max pressure: 10 bar - Air consumption: 8 Nm3/h - Weight: 6500 kg UNIT 3 - Ligmatech control system - Manufacturer: Ligmatech - Model/Type: Steuerung - Year of manufacture: 2007 - Made in Germany - Voltage: 400 V - Frequency: 50 Hz, 3 phase + N - Current: 8 A - Fuse: 16 A - Control voltage: 24 V Find more here - .ucymachines/ Contact us at - sales@ucymachines
CONTROLS CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 750 mm Y-axis travel: 500 mm Z-axis travel: 600 mm TABLE table surface (left-right): 1000 mm SPINDLE / HEAD spindle revolutions (max): 10000 /min tool fixture: ISO SK 40 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 6000 mm space requirements -front/back-: 4500 mm total height: 2800 mm total weight approx.: 8000 kg Pendulum machining unit 2 x 750 mm Machine in very good and well-maintained condition Only used for machining aluminum or plastic Features: - Various tool holders - 3R clamping system on each side (see photo) - Work area light
An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible.
Key data: 1270 mm, 610 mm, 720 mm
Inv. Num. : 9330 Type: MCV 1270 R Producer: MAS Generated: Parameters: Work table length: 1500 mm Work table width: 670 mm Maximum table load (uniform): 1200 kg X-axis travel: 1270 mm Y-axis travel: 610 mm Travel distances Z-axis: 720 mm Machine height: 3330 mm Machine length: 5000 mm Machine width: 3600 mm Machine weight: 11800 t Equipment: Grips Vise
Manufacturer: NORTE Year of manufacture: 2002 Model: VS 1000 Type of machine:Milling Machining Center Technical Details : - Machine weight: approximately 28,000 kg - Transport width: approximately 12,000 mm - Transport depth: approximately 4,800 mm - Transport height: approximately 4,500 mm - Working area, X axis travel: 8,000 mm, with pendulum machining at vertical spindle, 2 working areas of 2 x 3,765 mm - Working area, Y axis travel: 1,000 mm - Working area, Z axis travel: 1,000 mm - Feed range for X and Y axis: 1 to 20,000 mm per minute - Feed range for Z axis: 1 to 20,000 mm per minute - Maximum feed force X, Y, Z axis: 15,000 N - Rapid traverse X and Y axis: 20,000 mm - Rapid traverse Z axis: 20,000 mm - Protection class of feed drives: IP 64 - Voltage: three phase current 400 / 240 V, 3 phases / MP / 50 Hz - Control voltage with transformer: 24 V DC - Supply cable: minimum 4 ...
Manufacturer: HOMAG Year of manufacture: 2008 Model: PROFI BAZ 723/58/16/V/AP Type of machine: CNC Machining Center Voltage: 400 V, 50 Hz, 3 phase plus neutral Current: 90 A Control voltage: 24 V Find more here - .ucymachines/ Contact us at - sales@ucymachines
5-axis CNC vertical machining center Type: UMC-750 Manufactuter: HAAS Year: 2014 Control: Haas Hours: 22000 X: 762 mm Y: 508 mm Z: 508 mm Max spindle speed: 12000 rpm Find more here - .ucymachines/ Contact us at - sales@ucymachines
A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible.
number of spindle speeds: 10.000 U/min NC rotary indexing table Ø: 630 mm control: HEIDENHAIN - iTNC 530 numbers of positions in the tool changer: 32 tool taper: SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1800 mm y-travel: 1000 mm z-travel: 1200 mm Control: Siemens 840 C total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1800 mm y-travel: 1000 mm z-travel: 1200 mm Control: Siemens 840 C total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm Control: Siemens 840 C total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 760 mm y-travel: 510 mm z-travel: 610 mm table surface area: 1.020 x 510 mm control: WINMAX spindle turning speed range: 12.000 U/min spindle drive: 13,5 kW : 24 St. tool adaptor: SK 40 | | internal coolant system feed: 20 bar feed: m/min rapid traverse: 35/35/30 m/min total power requirement: kW weight of the machine ca.: 5,0 t dimensions of the machine ca.: m used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 830 mm, 530 mm, 580 mm
Manufacturer: ROMI Model: D 800 Year: 2014 Condition: Used Stock number: 9342 Control system: Fanuc 0i-MD Hours: 18832 h Work table length: 914 mm Work table width: 500 mm Spindle drive power: 22.4 kW Number of axes: 4 pieces Maximum vertical spindle speed: 10000 1/min X-axis travel: 830 mm Y-axis travel: 530 mm Travel travel Z-axis: 580 mm Machine weight: 5800 kg Equipments: Chip conveyor High-pressure central cooling (30 bar) 4. Axle ROMI MGR 230 v 4.0 Renishaw OMP 40-2 Workpiece Probes Aspira OMC 1200 Suction Tool holders and cutting tools (22 pieces in total)
CORMAK CKT 500x850 CNC turning center was built in 2016 in Poland by CORMAK. The machine is designed for the precision machining of metal workpieces with a maximum diameter of 500 mm and a length of 850 mm. It enables a wide range of advanced operations, such as drilling holes, threading, and turning of cylindrical, conical and spherical surfaces. Thanks to its wide range of machining capabilities, the machine is ideal for the production of precise and repeatable parts used in various industries. The CORMAK CKT 500x850 features a rigid design that ensures stable operation even during intensive use. Workpieces clamped in a 10-inch manual chuck are machined by means of a spindle reaching a maximum speed of 2000 rpm and cutting tools placed in a 6-position turret. Precise positioning and support of the workpiece during the process is ensured by the tailstock. All machining parameters are ...
The machine is in good technical condition, after prior agreement it is possible to test it. It has a modified system to TNC640, touch screen. Without tools and without water management,
Technical Data Max. Workpiece Diameter: 3,800 mm Max. Rotational Speed: 100 min⁻¹ Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 × 47 slots (94 slots total) Travel Paths X1-Axis (Right Support): 3,200 mm X2-Axis (Left Support): 2,800 mm Z1-Axis (Right Support): 750 mm Z2-Axis (Left Support): 750 mm Workpiece Spindle Speed Range up to 100 min⁻¹ Nominal Power: 67.4 kW Maximum Power: 202.2 kW Max. Torque: 71.6 kNm Max. Table Load: 35,000 kg Water-Cooled Motor Spindle Multifunction Head B-Axis with Stepless Positioning Swivel Range: 180° Driven Tools up to 6,000 min⁻¹ Hydraulic Clamping Direct Measurement System High-Pressure Cooling up to 70 bar Tool Magazines 2 Chain Magazines with 47 Slots Each Tool Diameter up to 120 mm Up to 150 mm with Appropriate Magazine Loading Max. Tool Length: 400 mm Max. Tool Weight: 20 k ...
Technical Data Max. workpiece diameter: 3,800 mm Max. rotational speed: 100 min⁻¹ Workpiece clamping: manual Chuck: Röhm Tool holder: Capto C8 Tool magazines: 2 × 47 slots (94 slots total) Travel Paths X1-axis (right support): 3,200 mm X2-axis (left support): 2,800 mm Z1-axis (right support): 750 mm Z2-axis (left support): 750 mm Workpiece Spindle Speed range up to 100 min⁻¹ Nominal power: 67.4 kW Maximum power: 202.2 kW Max. torque: 71.6 kNm Max. table load: 35,000 kg Water-cooled motor spindle Multifunction Head B-axis with stepless positioning Swivel range: 180° Driven tools up to 6,000 min⁻¹ Hydraulic clamping Direct measuring system High-pressure cooling up to 70 bar Tool Magazines 2 chain magazines with 47 slots each Tool diameter up to 120 mm Up to 150 mm with appropriate magazine configuration Max. tool length: 400 mm Max. tool weight: ...
x-travel: 650 mm y-travel: 560 mm z-travel: 650 mm table surface area: 400 x 400 mm control: Fanuc 18i-M spindle turning speed range: 120-12000 U/min : ja/yes hand wheel type of pallet-changer: 2 Cooling through the spindle: 10 bar chip conveyor: ja/yes feed: 670 mm/min distance work spindle /surface of the table: 800 mm table load: 400 kg toolpiece magazine: chain magazine: 80 BT 40 b-axis: 360 1° rapid traverse:: 40 m/min feed: 1-40.000 mm/min tool changing time: 1,3 sec tool/tool tool changing time: 3,8 sec chip/chip total power requirement: 22,4 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: 5 x 3,3 x 3 m (LBH) Machining centre - Horizontal Mitsubishi M-H4B, year of construction 1998, good ondition, regularly maintained. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 12,7 mm turning length: 50 mm control: Traub System TX 8i turning speeds: 12000 U/min c-axis: 0,001° gripping station: 12,7 mm c-axis: 0,001 ° speeds: 12000 U/min rapid traverse: 15 m/min turret (x-stations): 6 worktool system: 5+3 worktool system: 3 Werkzeugsysteme total power requirement: 2,5/4 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,4 x 1,1 x 1,7 m driven tools: 6+4+4 Rev+S7+S8 CNC turning machine Traub TNL 12K with barloader LNS Tryton 112 Motor drive S8 (rear working with driven tools possible) Motor drive S7 (front working with driven tools possible) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 65 mm turning length: 150 mm control: Siemens 840D spindle passage: 75 mm turning length: 150 mm c-axis: 2x 0,001 ° gripping station: 65 mm speeds: 5000 U/min rapid traverse: 30 m/min turret (x-stations): 3x12 Number of axles: 10 St. number of toolholder-holes: 36 chip conveyor: ja / yes kW coolant filtering unit: ja / yes kW Number of working hours: 35000 h total power requirement: 22 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 4,4 x 2 x 2,3 + Iemca m bar loader: Iemca Master 880 DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders in total 104 off, 24 of them are driven tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2050 mm y-travel: 520 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Heidenhain TNC 430 2x 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are ...
x-travel: 600 mm y-travel: 400 mm z-travel: 510 mm table-size: 800 x 400 mm Control: HEIDENHAIN iTNC 530 spindle turning speed - stepless: 12.000 U/min feed speeds - directly programable: 30.000 mm/min tool taper: ISO40 tool magazin:: 20 total power requirement: 25 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: LTH 3,5 x 2,1 x 2,95 m Control unit operating time: 32,790 hours. Spindle operating time: 10,310 hours. Includes Heidenhain electric handwheel. Includes electric touch probe. Includes internal coolant supply. Includes chip conveyor. Includes Gressel Gripos machine vise. Includes USB port. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Axis: 3 serial number: 84095 tool taper: BT40 toll turrets: 12 table surface area: 1300 x 400 mm no. of flutes: 3 T-Nuten T-slot - width: 18 mm control: FANUC dimensions: ca. 3000 x 2500 x 2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: FIDIA PCN 775 : . x-travel: 1000 mm y-travel: 620 mm z-travel: 700 mm Axis: 5 Achsen simultan gesteuert weight: 12 t Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm CNC-control: iTNC530 HEIDENHAIN table-size: 1000 x 560 mm max. table load: 800 kg spindle taper: SK 40 spindle turning speed range: 20 - 14.000 U/min feed stepless: 1 - 20.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 13 / 9 kW tool change unit: 32 Pos coolant: IKZ 25 bar voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,25 x 3,20 x 2,30 m chip conveyor: 3,50 x 0,85 x 1,55 m coolant equipment: 1,40 x 1,60 x 1,80 m spindle oil cooler: 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis) The ...
turning diameter: 210 / 350 mm turning length: 400 mm control: Fanuc 0i-TC swing diameter: 500 mm travel -x axis: 195 mm travel -z axis: 430 mm spindle speed:: 3500 1/min spindle bore: 75 mm bar diameter: 51 mm C-Axis: 0,001 ° turret head: 12 Pos. taper in tailstock-quill: MK 4 tailstock travel: 100 mm diameter of quill: 80 mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 30 m/min drive capacity - spindle motor: 11 / 15 kW voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,70 x 1,90 x 2,10 m chip conveyor: 2,80 x 0,60 x 1,30 m Transformer: 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - O ...
x-travel: 2134 mm y-travel: 1016 mm z-travel: 762 mm CNC-control: HAAS CNC Table dimensions: 2134 x 914 mm max. table load: 1814 kg spindle taper: SK 50 spindle turning speed range: 7500 U/min spindle motor: 22,4 kW feed range: 1270 mm/min rapid traverse: 15,2 m/min tool change unit: 30 Pos. coolant: IKZ voltage: 400 V total power requirement: kW weight of the machine ca.: 13,2 t dimensions of the machine ca.: 4,70 x 2,95 x 2,99 m chip conveyor: - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm CNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mm max. table load: 700 kg spindle taper ISO: BT-40 spindle turning speed range: 10.000 U/min feed stepless: 24.000 mm/min rapid traverse: 36/36/30 m/min drive capacity - spindle motor: 15/11 kW tool change unit: 24 coolant: IKZ 20 bar voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,35 x 2,20 x 2,67 m chip conveyor: 2,40 x 1,50 x 1,40 m filter unit: 0,90 x 1,40 x 1,30 m Transformer: 0,60 x 0,55 x 0,55 m - Serial No..:M281361B5N D - Machine ON: 21,011 h - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) - control: FANUC Oi-MD - Internal coolant supply through spindle 20 bar - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-axis: 1000 mm y-axis: 500 mm z-axis: 500 mm dividing head: CNC Axles: 4 spindle taper ISO: 40 table surface area: 1200x508 mm Table load: 600 kg control: Fadal CNC 88 HS Number:: 9505858 turning speeds: 40-7500 U/min Tool changer: 20-fach Tool changer: 21 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution o ...
x-travel: 2120 mm y-travel: 1000 mm z-travel: 850 mm Control: Fanuc table surface area: 3600x1300 mm dividing head: CNC Tool changer: 60 Pos total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3800 mm y-travel: 2000 mm z-travel: 670 mm Control: Siemens type: 840 D sl surface area: 3000x1800 mm milling spindle: 120 KW turning speeds: 30.000 U/min tool holder: HSK 63 Tool changer: 124 Pos c-axis: angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Measurement and monitoring systems The machine has always been updated to the latest technology The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our websit ...
x-travel: 1040 mm y-travel: 508 mm z-travel: 560 mm Control: Okuma type: OS 5020 M Table load: 1000 kg spindle taper ISO: 50 turning speeds: 5000 U/min table surface area: 508X1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m changing table The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Mo ...
x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm Control: Siemens type: type of pallet-changer: size of pallet: 400x500 mm Table load: 300 kg feed: 40.000 m/min spindle speed:: 20-8000 U/min spindle taper ISO: 40 Spindle capacity: 13/20 KW Torque: 191 Nm Tool changer: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 4-axis horizontal machining center. Dual pallet changer. B-axis table indexing 0.001°. B-axis rapid traverse 40 rpm. KNOLL coolant system with filter and chip conveyor. 40 bar coolant supply via collar. Good condition. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories ...
x-travel: 600 mm y-travel: 700 mm z-travel: 600 mm Control: Siemens type: Millplus Table dimensions: 630x500 mm tool taper: ISO 40 Cooling through the spindle: 40 bar Tool changer: 60 Pos. no. of tables: 2 chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward ...
x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm Control: Siemens type: 840Dsl Number of spindles: 2 St. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Double reversible clamp The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
