136,850 used machines on RESALE, but how to find them? Machine Search
Table length [mm] 1100 Table width [mm] 250 Number of axles [pcs.] 3 Auction-ID: A1-40982-71
CONTROLS conventional BASIC DESIGN basic design: cross bed WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 1120 mm Y-axis travel: 350 mm Z-axis travel: 400 mm distance spindle nose - table surface (max.): 420 mm TABLE table surface (left-right): 1600 mm table surface (front-back): 400 mm workpiece load (max): 1500 kg SPINDLE / HEAD spindle type: tilting head - mode of operation: manual - mode of operation: manual spindle revolutions (max): 28 /min number of gears: 1400 tool fixture: ISO SK 40 AXIS DRIVES feed velocity (min): 16 mm/min feed velocity (max): 800 mm/min ELECTRICAL SPECIFICATIONS total power consumption: 14.5 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2350 mm total height: 2150 mm total wei ...
CONTROLS Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC- X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm TABLE table surface (left-right): 800 mm table surface (front-back): 425 mm workpiece load (max): 250 kg SPINDLE / HEAD spindle revolutions (max): 4500 /min tool fixture: ISO SK 40 drive power: 7.5 kW ELECTRICAL SPECIFICATIONS mains power supply: 13 kVA DIMENSIONS / WEIGHTS space requirements -left/right-: 2720 mm space requirements -front/back-: 1850 mm total height: 2300 mm total weight approx.: 2025 kg ca 2000 h
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm table surface area: 700 x 460 mm spindle taper: SK 40 spindle turning speed range: 31,5 -5000 U/min spindle drive: 5,5 kW quill stroke: 80 mm vertical head swivelling: +/- 90 ° control: DIALOG 11 feeds x/y/z -stepless: 3000 mm/min rapid traverse: 6 m/min total power requirement: 13,8 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 2,73 x 2,0 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 41800 € : 798.38 € : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2.2 kW : 1600 mm : 1700 mm : 2000 mm : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for h ...
x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various tools including batch of inserts, tap holders, 1x insert drill ø 55 mm; 1x Akko AKSR 90-120 cutter head. Auction-ID: A1-49889-28
including: interchangeable inserts, core drills, countersink Auction-ID: A1-49889-294
Universal Milling Machine Operating hours 2672 according to meter Universal milling head can be swivelled 360° Mounting SK 30 Table eyelet 900 × 300 mm with three T-slots Including machine vise Machine in very good condition immediately ready for use Auction-ID: A1-50529-6
Edge milling machine on trolley see pictures Condition: untested (6) Auction-ID: A7-50523-816
Lot of roller end mills, 7 pieces, different sizes, see pictures. Auction-ID: A1-50529-220
Consisting of: drills, drill heads, pins, centers, machine vises, Auction-ID: A1-50090-72
Universal milling machine - 3-axis digital display - Central lubrication - Coolant system - Machine light - Machine feet - Spähnschutz - Emergency stop device - Mobile workbench incl. tools x-way 1550 mm y-way 400 mm z-travel 500 mm Table size 1850 x 350 mm Spindle holder ISO Sk 50 Spindle speeds 40 - 1800 rpm Quill stroke mm Total power requirement 7.5 KW Machine weight approx. 2.8 t Dimensions L x W x H 2.4 x 2.2 x 2.1 m Auction-ID: A7-50523-741
x-travel: 760 mm y-travel: 381 mm z-travel: 450 mm quill stroke: 152 mm table-size: 1300 x 305 mm control: Heidenhain TNC 360 tool adaptor: SK40 turning speed range: 100- 4.000 U/min rapid speed: 5000 / 7000 m/min feed speeds: 2,5 bis 3000 mm/min power requirement: 2.2 kW diameter of quill: 101 mm total power requirement: 15,0 kW weight of the machine ca.: 2,4 t dimensions: 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fitted with: Anilam Wizard 350 Plus digital readout (DRO) Table power feed Machine vice Large selection of R8 collets and tooling as pictured Coolant system 2HP variable-speed head R8 spindle 380V 3-phase power The machine is in great condition throughout and has been well looked after.
Auction-ID: A1-50540-40
x-travel: 4500 mm y-travel: 1700 mm z-travel: 1000 mm TABLE: - table surface (left-right): 6100 mm - table surface (front-back): 1000 mm - workpiece load (max): 8000 kg WORKING SPINDLE / HEAD: - spindle type: Schwenkkopf - tilting range: 1 / 3 ° - spindle revolutions (min): 15 U/min - spindle revolutions (max): 3000 U/min - tool fixture: ISO SK 50 - drive power (max): 30 kW AXIS DRIVES: - feed velocity (min): - mm/min - feed velocity (max): 20000 mm/min Control: NUM 750 total power requirement: - kW weight of the machine ca.: 28 t equipped with: - CNC Control NUM 750 - Universal indexing head 1°x 3° - ATC 61-fold - CE Sign The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 3000 mm
Acra Travelling Column Milling Machine from Taiwan
Key data: 6000 mm, 1250 mm, 2500 mm
Travelling column milling machine Manufacturer: Zayer Type 30KCU6000 AR Year of manufacture 2005 Control Heidenhain iTNC530 Travel X 6000 Z 2500 Y 1250 40 Compartment Tool Changer Tool holder SK50 Electronic Handwheel HR 510 Machine is in a used 100% working condition. It is sold from the Homburg Saar site, and a 20t overhead crane is available for dismantling.
Additional technical specifications: • Stop length left and right: 1600 mm
Equipped with: power supply, L-Gang on X-axis. Auction-ID: A1-50076-1048
Machine has already been disassembled Auction-ID: A1-50076-35
2x bin with various cutters, dimensions of the bin is 400x300 mm Auction-ID: A1-50076-197
Includes milling tool, ball bearings 3-19 mm, mounting block turning tool. Auction-ID: A1-50076-1028
Year 2014, equipped with milling head Kongsberg ArtWor Complete with vacuum system and unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-2
Cabinet with accessories for milling machine, plug-in head and shafts ISO40 Auction-ID: A1-50076-184
Including tap holders, parallel plates, clamping tools, etc. Auction-ID: A1-50076-278
equipped with 4th axis rotating table Auction-ID: A1-50076-54
Bj2019, equipped with High-Power milling unit. Complete with vacuum system, cooler IBAG and mobile unwinder, without dust extraction, Issue according to instructions Auction-ID: A3-50009-1
119x HSK 63 tool holder with full drilling, turning tools etc. Auction-ID: A1-50076-275
2x filled workshop cabinet with milling machine accessories iso 40 Auction-ID: A1-50076-261
Already disassembled Auction-ID: A1-50076-4
2x Chiron FZ 08 S, built in 1999/ 2000. Fully functional and ready for operation.
Computer-controlled milling and engraving machine Specifications: Brand: AXYZ, Canada Table Dimensions: 48\"x60\" Powerful computer-controlled milling and engraving machine with HF Spindle (Perske) also suitable for 3-dimensional engraving. Power current 380V, 3 phases. Features: Equipped with vacuum table, drill head, distance nose, cooling. Complete with computer and software. Particularities: In good condition and well maintained. Auction-ID: A1-47362-107
functionality not checked. The seller does not guarantee or warrant any of the condition or reliability of the machine. For loading, the seller provides a forklift truck with a lifting capacity of 7 t free of charge. All other lifting equipment required for loading must be organised by the buyer himself. A barrier-free loading ramp may be used. Auction-ID: A1-50380-3
Engraving and grinding machine Specifications: Brand: Deckel, Germany Type: G1L Robust engraving and grinding machines on foot for manual engraving of all types of materials Power current 380V, 3 phases. Features: Complete with clamping tools and large batch milling cutters. The package has all the tools to work independently. Auction-ID: A1-47362-106
Technical data Manufacturer: Wilhelm Kocherscheidt, Kempen-Nrh. Machine type: Universal milling machine with special design Model: MFM Configuration Horizontal spindle available Cross table with manual adjustment Pneumatic clamping device Workpiece pick-up between tips Protective cover over processing area Retrofitted control cabinet with emergency stop Special body available for special machining tasks Auction-ID: A1-50643-36
POS PosMill Type 1100 3-axis CNC milling machine Vertical CNC machining center with a machine table of approx. 1,050 x 600 mm. Equipped with a CNC control HEIDENHAIN TNC 430. Automatic tool changer. Equipment: Cooling system with IKZ, hydraulic system and chip conveyor. Auction-ID: A7-50677-25
maximum number of results exceeded
please refine your search
800 € 
