136,895 used machines on RESALE, but how to find them? Machine Search
For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...
• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm • Incl. 3-axis digital readout manufactured by HEIDENHAIN
With six slots and an attached vise, jaw width: 100 mm.
Attention: without the machine vises seen in the photos! • incl. three axis digital read out • incl. universal milling head
• Table with 7 slots • Incl. 3-axis digital readout manufactured by HEIDENHAIN
New and used milling cutters and drills. Various manufacturers Approx. 300-350 pieces The table is not part of the auction. Auction-ID: A7-50255-1
x-travel: 2000 mm y-travel: 1250 mm z-travel: 1108 mm turning speeds: 60 - 4000 U/min spindle motor: 38 / 24 kW tool taper: SK 50 tool change unit: 40 Pos. table surface area: 1600 x 1250 mm table load: 7 t c-axis: +/- 120 ° B-axis (table): 360.000 pos control: Heidenhain ITNC 530 total power requirement: - kVA weight of the machine ca.: 16,5 t dimensions of the machine ca.: 5,5 x 4 x 2,9 m 5-axis machining center with - CNC control Heidenhain iTNC 530 - NC rotary table with B-axis - Automatic swivel milling head (C-Axis) - 40-fold tool changer (SK 50) - Electronic handwheel - 2 Chip conveyor - Coolant device 30 l/min - Coolant through Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg
MTE” FIXED BED MILLING MACHINE Mod. BF-1700 FEATURES: CONTROL UNIT: • Model: TNC 410 • Brand: HEIDENHAIN MAIN TRANSMISSION: • Spindle speed range: 40 – 2500 rpm • Max spindle speed: 3000 rpm • Taper: SK 50 TRAVEL: • X-axis travel: 1500 mm • Y-axis travel: 1000 mm • Z-axis travel: 1000 mm WORK TABLE: • Table length: 1700 mm • Table width: 1000 mm • Max table load: 5500 kg
MTE” FIXED BED MILLING MACHINE Mod. BF-2700 CARACTERISTICS: • MACHINE LENGTH: 7000 MM • MACHINE WIDTH: 3000 MM • MACHINE HEIGHT: 3000 MM CONTROL UNIT: • MODEL: TNC 410 • BRAND: HEIDENHAIN MAIN DRIVE: • SPINDLE SPEED RANGE: 3000 1/MIN • SPINDLE TAPER: SK 50 TRAVELS : • X-AXIS TRAVEL: 2500 MM • Y-AXIS TRAVEL: 1000 MM • Z-AXIS TRAVEL: 1000 MM WORKING TABLE: • EXTERNAL LENGTH: 2700 MM • EXTERNAL WIDTH: 1000 MM • POWER CONSUMPTION: 40 KW
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
8 pieces diameter 16 mm; 4 pieces diameter 20 mm; 2 pieces diameter 32 mm; unused and in original packaging Auction-ID: A1-49785-198
Includes 100 matching inserts LNGQ1206 Auction-ID: A1-49785-172
Includes 7 different magnetic clamping blocks Auction-ID: A1-49785-33
Including face milling, drilling, collet, tapping bush holders; approx. 45 pieces Auction-ID: A1-49785-43
Reference: 744-05; own weight approximately 100 kg Auction-ID: A1-49785-260
Diameter: 60 mm; various sizes; approx. 130 pieces; lying in 2 drawers Auction-ID: A1-49785-272
Various recordings with ABS40/ ABS50 coupling; in 2 cardboard boxes Auction-ID: A1-49785-209
Including face mill, ER collet holders; Includes various boring tools/ 42 pieces in total Auction-ID: A1-49785-45
Various sizes; unused and in original packaging Auction-ID: A1-49785-303
7 pieces diameter 50 mm with reference A21150R08-11; 8 pieces diameter 63 mm with reference A21163R10-11; unused and in original packaging Auction-ID: A1-49785-164
Including diameter 22 and 32 mm; various lengths; unused and in original packaging Auction-ID: A1-49785-94
Including T-slot / diameters 63 x 3 mm, 63 x 5 mm, 100 x 4 mm; Including matching inserts and miscellaneous; in 2 cardboard boxes Auction-ID: A1-49785-230
Various diameters including 2 pieces diameter 32 mm, 1 piece diameter 175 mm, 2 pieces diameter 315 mm; unused and in original packaging; Including pallet box Auction-ID: A1-49785-77
4 pieces with diameter 25 mm and length 165 mm; 7 pieces with diameter 25 M12; 9 pieces diameter 32 M16; Series 490; unused and in original packaging Auction-ID: A1-49785-132
Various diameters; unused and in original packaging; 8 pieces in total Auction-ID: A1-49785-50
2 pieces diameter 63 mm; 2 pieces diameter 100 mm; 1 piece diameter 125 mm; 1 piece diameter 160 mm Auction-ID: A1-49785-136
Equipped with lower and upper clamping Auction-ID: A1-49785-49
Minimaster; with cylindrical absorption; including matching inserts; with accompanying Lista inlay trays; Horizontal and including pallet box Auction-ID: A1-49785-90
Incl. peripherals and documents Dismantled for transport Video available! Auction-ID: A1-40982-13
Control Conventional Horizontal/vertical Horizontal and vertical Power [kW] 3.0 Number of axles [pcs.] 3 X-axis travel [mm] 400 Y-axis travel [mm] 300 Z-axis displacement [mm] 400 Table length [mm] 750 Table width [mm] 300 Tool holder SK40 Main spindle power [kW] 2.2 Min. spindle speed [rpm] 40 Max. spindle speed [rpm] 1600 Options Digital readout └ Type of digital readout Heidenhain Auction-ID: A1-40982-30
x-travel: 1250 mm y-travel: 500 mm z-travel: 500 mm Control: Heidenhain tnc 124 serial number: 5277 table size: 1800 - 360 mm taper ISO: 50 weight of the machine ca.: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 3500 mm y-travel: 2500 mm z-travel: 1000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2300 mm rapid travel x/y/z: 15/12.000 mm/min feeds: 5.000 mm/min tool taper: ISO 50 number of spindle speeds: 5000 U/min/rpm Spindle power: 30 kW table weight: 10 t handwheel: HR- 410 weight of the machine ca.: 31 t dimensions of the machine ca.: 11 x 3,44 x 4,9 m - CNC control Heidenhain iTNC 530 - Tool changer 30-fold (ISO 50) - Milling head CH -45 - Coolant through spindle - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
X-axis: 2000mm, Y-axis: 1200mm, Z-axis: 1500mm, table surface: 2200x1200mm, number and width of T-slots: 7x22mm, distance between T-slots: 140mm, max. workpiece weight on table: 7.2t, working feed rate: 0-12,000mm/min, rapid traverse: 15m/min, acceleration: 1.5m/s², hydraulic unit power: 5.5kW, pump flow rate: 25l/min, working pressure: 110bar, tank capacity: 180l, cooling unit capacity: 6,100W, compressor power: 2.61kW, length: 5820mm, width: 6723mm, height: 3602mm, weight: 17t, spindle operating hours: 5,000h, with documentation, an on-site inspection is possible.
FIXED BED MILLING MACHINE "CME" BF-01 FEATURES: X-axis (longitudinal) 1000 mm Y-axis (transverse) 700 mm Z-axis (vertical) 600 mm CNC Type Max spindle speed 3000 rpm Table length 1400 mm Table width 600 mm Maximum load on the table 3798 kg Spindle Taper 50 Reviewed no Length x width x height 2800.0 × 2500.0 × 2500.0 Weight 9000 kg Year of manufacture: 1993
The machine is in good technical condition; it can be tested by prior arrangement.
Auction-ID: A1-40982-1
Control: CNC Table size (LXW) 920x280mm Max workpiece weight: 250kg Auction-ID: A1-40982-62
Control Conventional Horizontal/vertical Horizontal and vertical Table length [mm] 1520 Table width [mm] 385 Main spindle power [kW] 11 Auction-ID: A1-40982-93
Number of axles [pcs.] 3 X-axis travel [mm] 800 Y-axis displacement [mm] 450 Z-axis travel [mm] 500 Table length [mm] 1050 Table width [mm] 625 Tool holder ISO40 Min. spindle speed [rpm] 32 Max. spindle speed [rpm] 1600 Options Digital readout └ Type of digital readout Heidenhain Auction-ID: A1-40982-38
Incl. filter Interlit SK200-760 Incl. automatic tool holder Incl. documentation Incl. video available Auction-ID: A1-40982-14
Has a defect in X-axis magnetic linear field. This needs to be repaired. Number of axles [pcs.] 3 B-axis rotation [°] 105 Table length [mm] 3.100 Table width [mm] 900 Auction-ID: A1-40982-4
Mori Seiki DuraVertikal 5080 3Axis Machining Center (11/2006) Manufacturer: Mori Seiki Type: auto_awesome Source language: English 587 Table length 1350 mm Table width 600 mm Number of T-profiles 6 T-profile width 18 mm Max. table load 1000 kg Longitudinal travel (x-axis) 1050 mm Transverse travel (y-axis) 530 mm Travel (z-axis) 510 mm Max. tool diameter 125 mm tool weight 8 kg Spindle nose bt 40 Distance spindle nose table 150 - 660 mm By 0 rpm Until 10,000 rpm Voltage 50 Hz 3x 400 volts Spindle performance 22 kW Total power requirement 58 kVA Machine weight approx. 8,030 kg Length 2,500 mm Width 2,350 mm Height 2,700 mm Give feedback Translation results available Year of manufacture: 11/2006 Condition: used, good, in production Incl. tools in the turret Auction-ID: A7-50270-26
Has problems with startup/control, problem unknown Vertical 3 Axles Main spindle power [kW] 2.2 Digital readout Auction-ID: A1-40982-55
maximum number of results exceeded
please refine your search
