milling center used for sale

Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.

Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible.

Code: 0324 Brand: OMEC Model: 750 Automatic milling machine for dovetail joints on drawers and various furniture parts Technical data: Useful working width 480 mm Thickness of drawer fore parts 60 mm Number of joints per minute: at 1st speed 25 , at 2nd speeds 35 Electric motor power of toolholder spindle 1,5 Hp Electric motor power trip traverse 1,5 Hp Overall dimensions mm 800 X 1300 X 1200 h Weight kg 350

x-travel: 10500 mm y-travel: 1200 mm z-travel: 1600 mm control: Heidenhain TNC 426-CA taper ISO: 50 P.D.B. Table dimensions: 1100 x 12000 mm spindle speeds: 20 - 2000 mm voltage: 380 V total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 12000 mm y-travel: 2000 mm z-travel: 1000 mm control: E.C.S. 2351 taper ISO: 50 P.D.B. Table dimensions: 450 x 450 mm spindle speeds: 0 - 1500 mm total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m Mist extraction Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Trimill VU 2313 Vertical Machining center was manufactured in the year 2010 in the Czech Republic and has 68648 hours, of which 40637 are spindle hours. It is equipped with a Heidenhain iTNC530 control unit and has 5 axis. The machine has a spindle speed of 10000 rpm, is in good condition, and is well maintained.

x-travel: 710 mm y-travel: 600 mm z-travel: 500 mm NC-rotary table: 630 mm spindle taper: SK 40 spindle turning speed range: 18 - 6300 U/min control: DIALOG 4 feed: 2 - 3600 mm/min rapid traverse: 6 m/min table load: max. 485 kg quill stroke: 80 mm spindle drive: 9,5 kW total power requirement: 20 kVA weight of the machine ca.: 4,6 t dimensions: 3,8 x 2,24 x 2,35 m Accessories: vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BJ Band Saw Kasto SBL 280 U 1998 Conventional lathe E3N01 Lathe Hurco TM8i Surface Grinding Machine FSG-1640AD Wagner 1997 Silent E Forklift R20-15 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX24 3-axis milling machine Hurco VMX30t 3-axis milling machine Hurco VMX64 Wire EDM Machine Mitsubishi FA20 Zeiss Contura G2 CNC Coordinate Measuring Machine 2007

Key data: 2200 mm, 600 mm, 600 mm

Travelling column milling machine Manufacturer Ibarmia Type ZV40 Year of construction 2000 Control Heidenhain TNC 410 Table size 2600 x 650 permissible. Load 2300kg Travel X/YZ 2200/600/600 Tool holder SK40 24 Way Tool Changer max speed 8,000rpm Partition wall for pendulum operation Electronic Handwheel HR410 Chip conveyor Glass scales in all axes Guide of the Y-axis would have to be redone In 2018, the machine got a new guide in Z and X axis, and a new main spindle. Machine is fully functional except for the linear guide of the Y-axis. Machine has the following dimensions: L x W x H 4200 x 3000 x 3050, weight 12000kg. Without the vices in the photos.

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralTwo-spindle turning centre with - 2 cross slides - 2 turrets with 12 positions each (all driven) - main spindle and counter-spindle - 2 C-axis - 2 tool drives - Y-axis on slide 1 - chip conveyor - workpiece-unloading; Control: Fanuc 31i Working areaBar diameter max.50 mmTransport beltTransport belt for finished workpieces outside the machineDMG MORI NETSERVICEDMG MORI NETSERVICE Qualified support by Internet-based remote diagnosticsIoT connectorDMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)Special equipmentAdditional bar capacity for main spindle from Ø 50 mm to Ø 65 mm (max. 5.500 RPM) Additional charge for cooling on turret (upgrade to) 50 bar instead of 25 bar

Clamping surface of the fixed angle table: 195 x 605 mm Table movement longitudinal/vertical automatic and by hand: 290/300 / 330/340 mm Headstock transverse movement by hand: 150 mm Spindle holder: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

GeneralUniversal Milling Machine; Control: CELOS X with Siemens 840D SL Operate Technical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minClamping SystemHSK-A 63 Rapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgWorking area 1Longitudinal650 mmCross520 mmVertical475 mmDirect measuring systemDirect path measuring systemBenefit PackageBenefit Package consisting of: Swarf conveyor, with cleaned slot screen Internal coolant supply 40bar/600l Air blast through spindle centre Application Tuning Cycle 3D quickSET (pre selection, measuring probe)Spindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp  ...

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)Tropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

- technically efficient, ready to work – after full service - motor power: 2.2 kW - cutter diameter: 300 mm - milling angle: +45° / 90° / -45° - pneumatic profile clamping - cooling and lubrication system - compressed air preparation station

swivel table, size: 255 x 600 mm Table height adjustment by hand approx.: 400 mm Table transverse adjustment by hand approx.: 150 mm Automatic longitudinal adjustment approx.: 260 mm Drive motor: 380 V, approx. 2.2 kW Space requirement: 1000 x 950 x 1520 mm

The machine is in good technical condition, testing is possible by prior arrangement.

A Haas CNC vertical milling center is available. Travel X/Y/Z: 1010mm/508mm/635mm, table dimensions X/Y: 1200mm/450mm, max. table load: 1500kg, rapid traverse: 25m/min, feed rate: 16m/min, tool stations: 20, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2800mm, weight: approx. 6000kg. An on-site inspection is possible.

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

for spare parts. Machine is out of service. Processor card removed

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110° ...

Travel X/Y/Z: 1400mm/630mm/600mm, table dimensions X/Y: 1800mm/630mm, maximum workpiece weight: 1000kg, spindle taper: ISO50, speed: 2800rpm, torque: 1600Nm, spindle drive: 15kW, machine dimensions X/Y/Z: approx. 3450mm/4300mm/2300mm, weight: approx. 5850kg, documentation available, an on-site inspection is possible.

The machine is in good technical condition, testing is possible by prior arrangement.

3 Axis Digital Display FAGOR Year of Make: 1975 Travel: X 500 Y 200 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Universal table 660 x 380 mm clamping surface Vertical milling head Extendable drill quill Milling cutter protective housing Machine Light Various tool holders SK 40 Chip tray Coolant Setup 4 pcs machine shoes Operating instructions THE MACHINE IS IN VERY GOOD CONDITION

Comec FXT double-sided milling machine Number of milling units 4 Generator system: Right/Left/Up/Top Power of milling units 4×0.85kw Rotational speed 12000rpm Feed speed adjustable by variator

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Manufacturer NICOLAS CORREA Model FP 35 UAGA Year 2006 CNC HEIDENHAIN iTNC-530 Table surface 4,500 x 1,500 mm Allowable weight on table 15,000 kg. Travel (X / Y / Z) 3,500 / 2,600 / 1,000 mm Pitch between uprights 2,300 mm Fast Forward Axles (X) 15,000 mm/min Fast Forward Axles (Y, Z) 12,000 mm/min Maximum Working Advance 5,000 mm/min UAGA Orthogonal Automatic Head INCLUDED Head with Automatic Rotation 2, 5º /2.5º Speed of the UAGA Orthogonal Head 3,000 r.p.m. ISO-50 Head Cone Main Motor Power 22 kW No. of Speed Ranges 2 Direct Output Head INCLUDED Head Speed Direct Output 5,000 r.p.m. Automatic Retractable Support l on the Right side for Orthogonal UAGA INCLUDED Automatic Retractable Support l on the Left for Direct Exit Head Cover. INCLUDED Automatic head pickup INCLUDED Automatic tool loader INCLUDED Loader positions 30 HEIDENHAIN HR 410 Portable Button Pad  ...

Year: 2016 - technically efficient, ready to work – after full service - motor: 3 kW/400V - milling diameter: 250 mm - milling width: 305 mm - material stop can be rotated in both directions up to 20° - vertical and horizontal pneumatic profile clamping - compressed air preparation station - cooling and lubrication system

Universal tool milling machine DECKEL FP 4 MK with 3 axes active digital display Heidenhain TNC 113 Year of Make: 1990 Travel: X 500 Y 400 Z 400 Speed range: 50 – 2500 rpm With the following accessories: Rigid angle table 800 mm x 460 mm clamping surface Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Hydraulic tool clamping Hydraulic vise GRESSEL 125 mm Various SK 40 milling mandrels Splash guard cabin Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Cross milling machine Bartezaghi 2BE 250 Spindle length 240 mm Maximum milling height 250 mm Spindle diameter 40 mm Spindle speed 5600 RPM 9kw motor Pneumatic material pressure Desktop control

Offer 26048 Technical data: - 3 sides – machining in one clamping for lock and PZ punches, - etc. to be milled out in aluminium / plastic / steel profiles - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Manual profile bar turning device for 3-sided machining - Working range - x (landscape) 250 mm - depending on position - y (longitudinal) 90 mm - depending on position - z (vertical) 120 mm - max. Profile height depending on position approx. 120 mm - max. Profile depth 100 mm - Spindle speed approx. 6000 + 12000 rpm - Pneumatic connection 8 bar - Drive 400 V / 1.5 kW - Space requirements approx. W 650 x H 1550 x D 850 mm - Weight approx. 340 kg

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Sale: Handover in the current condition as seen -Protective cover: damage see photos -Manufacturer: Homag, milling unit from edge banding machine BRANDT KS 25 -Motor: Homag 0.75 kW / 12000 rpm -Voltage: 220V / 200 Hz -Pneumatic cylinder: Bosch -Dimensions: 900/570 / H325 mm -Weight: 44 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit from edge banding machine BRANDT KM 36 / KM 35 -Motor: 2x Homag type LF-55L 0.55 kW / 12000 rpm -Voltage: 220V / 200 Hz -Number: 2x milling unit available -Price per piece -Dimensions: 500/350 / H570 mm -Weight: 55 kg

Clamping plate, milling support, plate field, welding table, welding table, plate boring mill, clamping angle, clamping cube, clamping device, clamping supports, clamping tool, clamping box, clamping tower -U-profile: steel profile 160 x 160 mm -Interior dimensions: 95 x 125 mm -Length: 800 mm -Weight: 81 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: WMW PWS, 17 hob cutters -Hole: Ø 27 mm 4 pieces, Ø 32 mm 7 pieces, Ø 40 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 400/400/H150 mm -Total weight: 52.5 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg

End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Katt, milling unit with 3 milling cutters -Motor: Type N132M 12 kW / 2960 rpm -Protection class: IP 44 -Shaft: both sides Ø 40 x 235 mm -Milling width: 20/10/18 mm -Dimensions: 840/320 / H380 mm -Weight: 99 kg

Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg