milling center used for sale

Key data: 2000 mm, 1200 mm, 1200 mm

Soraluce bed milling machine with Heidenhain CNC 415, NC swivel head SK 50, chip conveyor, with drilling + milling tools + holders, approx. 50 parts. The machine was used for 1 layer for light machining and is now no longer needed. Please request further data.

Indexing faceplate Hand operated Maualy operated Plate diameter 500mm T-Slot 19 mm Weight 185 kg

PART NUMBER 7660 SPECIFICATIONS - max range of machined diameters 160mm - min length of input material 750mm - machining allowance (on diameter) max 30mm - 33kW knife head drive motor - infinitely variable feed speed control on the inverter - feed motor about 2.2kW - Pneumatic actuators 7pcs In sequence: - 4 toothed pulling shafts - 3-knife head - 3 smooth pulling output shafts - dimensions l/w/h 3800x1100x2800mm - weight about 4000kg ADVANTAGES – French production – solid construction – pneumatic actuators (clamps) – used beaming machine – very good condition Net price: 85900 PLN Net price: 20452 EUR calculated at a price of 4.2 euros (With higher price fluctuations, the price may change.) Net price given for international transactions, EU clients with EU NIP (NIP) EU.

Technical data: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Key data: 400 mm, 375 mm, 250 mm

With CNC 432 screen control with operator guidance, with rigid angle table, operating and programming instructions. Possibly also with H&K machine cabinet, 27 tool clamping holders, 20 collets, Gressel clamping vice. The machine was used in precision mechanics and was always programmed by the same operator, so it was in good condition.

This 5-axis FPT STINGER XL CNC milling machine was manufactured in 2008. Ideal for complex and precise milling tasks, it offers advanced capabilities for a variety of applications. Consider the opportunity to buy this FPT STINGER XL CNC milling machine. Contact us for more information about this machine.

This 5-axis HNK HPM 30M gantry milling machine was manufactured in 2014. Ideal for complex and precise milling tasks, it offers enhanced flexibility and accuracy. Consider the opportunity to buy this HNK HPM 30M gantry milling machine. Contact us for more information about this machine.

This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine.

This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information.

This 3-axis Droop & Rein FS 110 milling machine was manufactured in 1976. It features a robust Heidenhain TNC 426 control, a main spindle power of approximately 18KW at 1600rpm, and a tool holder of ISA 50 (DIN 2080). The machine includes an electric tool clamp and automatic central lubrication. Ideal for precision milling, the Droop & Rein FS 110 machine we have for sale. A lot of additional accessories are included. Contact us for further details regarding this milling machine.

This 3-axis MIKROMAT 8V gantry milling machine was manufactured in 2000. It features an Andronic 2000 control system, automatic tool change with a 16-position ATC, and a high-speed spindle capable of up to 30,000 rpm in short bursts. Equipped with a BLUM laser system for precise tool monitoring and measurement, and a scraper belt conveyor by Knoll for efficient chip removal. Consider the opportunity to buy this MIKROMAT 8V gantry milling machine. Contact us for more information about this machine.

This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information.

This 3-axis T-Rex Servo-0609 was manufactured in 2023. It features a CNC portal milling machine with a KinetiC-NC control system and PC software. The travel dimensions are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It includes a Hiteco 4.0 kW ATC spindle, air-cooled, with a 24,000 rpm and an automatic 4-fold tool changing station. Consider the opportunity to buy this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine.

This 3-axis Correa XB-420 Bed Type Milling Machine was manufactured in 1990. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this Correa XB-420 Bed Type Milling Machine. Contact us for more information.

Weight: 3,5 to. digital: ja milling-head swivable +/-: ja : ja Dimensions (L/W/H): 1700 x 1500 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm

This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machines transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information.

This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine.

A CNC drilling and milling center Morbidelli is available. Travel X/Y/Z: 2600mm/800mm/55mm, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2200mm, weight: approx. 3300kg. An on-site inspection is possible. Available from May 2026.

This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine.

Table dimensions X/Y: 520mm/430mm, speed: 25000rpm, milling stroke: 43mm, milling spindle diameter: 22mm, cutter diameter min./max.: 3mm/40mm, weight: approx. 60kg. On site inspection is possible.

This SACHMAN TRT314 H was manufactured in 2008. A robust bed type milling machine featuring a large table size of 1200 x 1200 mm and extensive X, Y, Z travels of 2500 mm, 1400 mm, and 1500 mm respectively. It includes a SELCA S 4045 PD CNC for precise control and dual chip conveyors for efficient chip evacuation. Consider the opportunity to buy this SACHMAN TRT314 H bed type milling machine. Contact us for more information.

Key data: 2700 mm, 2200 mm, 1050 mm

CNC travelling column machining centre from the manufacturer MIKROMAT Werkzeugmaschinen GmbH & Co. KG, Dresden, designed for the precise and heavy-duty machining of large-format workpieces. The machine is designed in a classic travelling column design and is particularly suitable for tool, mould and machine building with a new design. Distance spindle nose – table Vertical: approx. 300 – 1,350 mm with universal milling head (UFK): Vertical: approx. –290 to +760 mm Horizontal: approx. –55 to +995 mm in the table area: approx. 180 – 955 mm Spindle / Speeds Spindle without extension: 10 – 6,000 rpm Spindle with extension: 10 – 6,000 rpm Universal milling head (UFK): 10 – 4,000 rpm Universal milling head (UFK) Rotation around vertical axis: 360° (indexing 2.5°) Horizontal axis swivel: ±110° (indexing 2.5°) Electrical data (nameplate) Connected load:  ...

This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine.

This 4-axis JOBS FRAZER cnc milling machine was manufactured in 2017. It features a large fixed table of 3100x1000 mm and high-speed axes capable of up to 35 m/min, ensuring efficient machining. The machine includes a Heidenhain iTNC 530 HSCI CNC for precise control and a 24-position disc tool magazine. If you are looking to get high-quality milling capabilities, consider the JOBS FRAZER machine we have for sale. Contact us for more information.

x-travel: 4500 mm y-travel: 2000 mm z-travel: 1200 mm spindle taper: ISO 50 Cube: 2 weight of the machine ca.: 20.000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A walk-in CNC 5-axis large-format portal milling machine Fooke is available. Travel X/Y/Z: 3000mm/2500mm/1150mm, bridge height: 800mm, table dimensions X/Y: 3000mm/2500mm, spindle power: 28kW, spindle speed: 16000rpm, swivel range A: +/-100°, rotary range C: +/-181.5°, feed rate: 15m/min, rapid traverse X/Y: 20m/min, rapid traverse Z: 10m/min, rotary speed A/C: 8rpm, tool holder: HSK-63A. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/5200mm, weight: approx. 50000kg, control: Siemens 840D powerline. Documentation available. On-site inspection is possible.

The machine is in good technical condition, after prior agreement it is possible to test it. There is a complete manual in Czech and German. We also have a probe and accessories (vices, clamps, collets, mandrels, etc.)

Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.

Please click on pictures

Key data: 800 mm, 650 mm, 550 mm

Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little

gebr. Cover FP3 NC, built in 1983 in neat condition: Travel X: 400 mm, Y: 400 mm, Z: 400 mm Table size approx. 700 × 460 mm Tool holder SK 40 Spindle motor power typ. 2.0 – 3.0 kW Feed speed approx. 2 – 3,600 mm/min Rapid traverse up to approx. 4,000 mm/min Total weight approx. 1,800 – 2,000 kg Power supply / connection 380 V three-phase current Control Dialog 2

High-precision 5-axis micromachining system MICROMASTER 5X-L – very good condition For sale is a high-precision 5-axis micromachining system MICROMASTER 5X-L, which was purchased in 2017 and has since been used exclusively for research and development projects. Accordingly, the condition of the facility is very good, with careful use and careful maintenance. The machine is ideal for demanding applications in micro and precision machining, prototyping and research and development. Facilities of the facility: 1. General information • Basic machine: MICROMASTER 5X-L • Machine type: 5-axis micromachining center • Design: Ultra-precision machine for research, development and high-precision manufacturing tasks ________________________________________ Kinematics & Precision • Hydrostatic turn/swivel unit for maximum positioning and repeatability • Travels: o X- ...

Travel X/Y/Z: 600mm/400mm/420mm, feed rate X/Y/Z: 6m/min, rapid traverse: 6m/min, spindle power: 8kW, speed: 4500rpm, quill stroke: 75mm, table dimensions X/Y: 900mm/450mm. Machine dimensions X/Y/Z: approx. 2800mm/2200mm/2100mm, weight: approx. 2800kg, control: Heidenhain 415B, hours: approx. 56193h. Includes cooling lubricant system and 3D measuring probe. The brake of the Z axis is to be replaced. Documentation available. An on-site inspection is possible.

Milling machine Röders RXP 800 DS BJ "007

Milling machine TOS KURIM FRO 6, FRO8

Reckermann Combi, 1000 milling machine Has run until the end, in good condition to give away cheaply Sale without guarantee and warranty

The machine is in good technical condition, after prior agreement it is possible to test it. The machine has been out of operation for about a year. Regular branded service worth €5,000 (we can document it) was last performed at the end of 2023, after which the machine was in limited operation. It is necessary to determine the condition of the screws and repair it if necessary. It is necessary to calibrate the 5-axis indexer. The spindle makes a loud noise.

Inv. Num. : 8953 Type: MULTICUT 500i S Producer: MAS Created: 2011 Parameters: Control system: Siemens SINUMERIK 840 D Maximum turning diameter: 690 mm Max. turning length: 1527 mm Maximum milled profile: 486 x 486 mm Maximum spindle speed: 3500 1/min Maximum workpiece weight: 1600 kg Axis X: 640 mm Axis Y: 370 mm Axis Z: 1600 mm Length: 5400 mm Width: 3950 mm Height: 3760 mm Weight: 22000 kg

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

MIKRON WF 3 DCM Universal Milling Machine Heidenhain TNC 151 control Table 800x380 mm x-travel 500 mm y-travel 500 mm z-travel 400 mm speed range 3150 rpm drive power 4 kW SK 40 Weight 1700 kg Many Accessories and tools

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

Offer 25442 Technical data: - Steel - Stainless steel - Aluminium - Plastic - Machining - Deburring and faceting process is carried out with a milling cutter - Face cutter head with indexable inserts - Motorized feed module - Material thickness up to 100 mm - Facet angle adjustment 25 / 50 + 30 / 60 ° - Bevel width adjustable up to 20 mm - Speed infinitely variable 2000 - 6000 rpm - Feed rate infinitely adjustable - Table size 750 x 400 mm - Drive 400 V / 5.2 kW - Space requirement approx. W 800 x D 1500 x H 1700 mm - Weight approx. 500 kg

Used HERMLE UWF 1202 S Universal Tool Barrel and Drilling Machine CNC control HEIDENHAIN TNC 426 Technical data: Travels X-axis 850.0 mm Y-axis 630.0 mm Z-axis 500.0 mm Rapid traverse 10 m/min Table length 1200.0 mm Table width 550.0 mm Max. spindle speeds 20 - 4200 rpm Spindle motor power 7.0 kW Tool holder SK 40 Coolant 120 liters Total connection 16 KW Dimensions 3.3 x 2.4 x 2.4 m Space requirement 5.0 x 4.2 m See still under power

Manufacturer: Avian Model: G60/150-R5-S2 (Screen size 25mm) Working witdh: 600mm x 1500mm Knives: DC53 58-60HRC Bearking: SKF Weight: 8000kg - The machine was in use only for a few months and was afterwards fully refurbished. - It comes with a newly built (unuesed) cabinet with Siemens components and new spare knives. Find more here - / Contact us at -

Offered is a conventional Vernier universal milling machine. 3-axis digital readout DRO. Including swiveling milling head, integrated swivel arm up to 250kg. Inspection by appointment possible.

Key data: 3000 mm, 4000 mm, 1500 mm

Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.

CNC lathe TAKAMAZ EX 20 / Fanuc 15 TF -Control FANUC 15 TF -Turning diameter max. 260mm -Turning length approx. 500mm -Rod passage 42mm -Spindle speeds 40 - 4000 rpm -Spindle nose A2-6 -Tool positions (stations) 12 compartment / direct mount -Tool measurement (Tooleye) -Parts catcher -Tailstock -Collet holder 173 E -Spindle motor 7.5 KW Dimensions: LxWxH 2.6x2x1.8 meters / Weight : 2800 kg

Tool milling machine DECKEL FP 2 LB 3 axis digital display maintained original condition - 3-axis digital display - Travel X/Y/Z: 795 × 300 × 400 mm - Automatic feeds and rapid traverses in all 3 axes (18 stages) - Spindle speeds: 40–2000 rpm (18 steps) - Horizontal and vertical milling equipment - ISO 40 tool holders - Table clamping surface: 1000 × 440 mm - Swivelling vertical head with drilling quill - Coolant device - Various tool holders - Documentation available L×W×H 2.5×2.4×1.8 meters / Weight 2200Kg

TSUGAMI MA 3 H - 10P Horizontal Machining Center 10 - Compartment Pallet Changer -Control FANUC 11-M -Travel X/Y/Z 340x260x400mm -10 - Compartment pallet change -B - Axis 360 DEGREES -Indexing 0.001mm -Speed range 36-5000 rpm -Feed range 1-6000 mm/min -Rapid traverses 12/meter-min -Tool holder BT 40 -Double-arm gripper -Tool magazine 62 stations -Drive power / spindle motor 7.5 KW -Electronic handwheel -Chip conveyor -Central lubrication -Coolant device -RS 232 data interface -Spindle oil cooler -Documentation Dimensions: LxWxH 4x2.4x2.4 meters / Weight 7000Kg