126,721 used machines on RESALE, but how to find them? Machine Search
Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor
The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc 31iMB in standard version, including the following special equipment of the machine: control system dialogue in Czech language Automatic tool change – 24 pcs Z-axis travel – 1500 mm with raised stand Chip conveyor Workpiece probe OMP-60 Tool probe TS-27R Spindle power 22/26 KW Horizontal spindle speed 5000 rpm. Manual rotating head, speed 3500 rpm. Spindle center cooling Tool magazine can be tilted out of the table space – next to the stand on the left
Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle
Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control
Window machining center Dimensions of workpieces: Workpiece length: 270 x 3000 mm Workpiece thickness: 30 - 85 mm Workpiece width: 180 mm Equipment: Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW 3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kW Glazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kW Feed device 1.5 kW, roller diameter 120 mm Oertli tools included profile 68, 78, 82
Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe
CNC turning and milling center Okuma Multus B300II-W Control: OSP-P 300SA Year of Make: 2022 Internal machine no. 55 X-axis: 580 mm Y-axis with stroke: (+80/-80 mm) 160 mm Z-axis: 935 mm B-axis: up to 225°, positioning in 0.001° W-axis: 1,000 mm Turning length: 900 mm Turning diameter: 630 mm Tool holder: HSK A63 Tool magazine: 40-fold Equipment: - Tool monitoring system - Tool measuring device - ONE touch IGF - Hinged belt conveyor - Coolant tank incl. pump 20 bar - Preparation for in-process measurement - Tool height correction in Y-axis for turning tools - Hi-Cut Pro high-speed control
To mediate on behalf of the customer. Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32 Manufacturer: Gildemeister Control: Fanuc 160iB First commissioning: 2003 #009328 Location: Poland Control Fanuc 160i-B Turning length 120 mm Turning diameter 32 mm Number of axes 8 Travel X1 axis 65 mm Travel Y1 axis 350 mm Travel Z1 axis 120 mm Travel X2 axis 265 mm Travel Y2 axis 235 mm Travel Z2 axis 320 mm C1-axis travel 360° Travel C2 axis 360° Spindle bore 42 mm Spindle speed 8000 rpm Motor power 7.5 kW Total power requirement 34 kVA Dimensions L 4900 x W 1630 x H 1920 mm Weight 4350 kg The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
CONTROLS CNC controls FANUC 18 MB WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 .. among of them simultaneous CNC axes: 3 X-axis travel: 840 mm Y-axis travel: 860 mm Z-axis travel: 840 mm rotating range B-axis from: 0 ° rotating range B-axis up to: 360 ° TABLE table surface (left-right): 630 mm table surface (front-back): 800 mm workpiece load (max): 1500 kg SPINDLE / HEAD spindle type: horizontal spindle revolutions (max): 8000 /min TOOL MAGAZINE number of positions: 140 AUTOMATIC WORKLOAD EQUIPMENT store type: table changer number of store positions: 2 ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / ...
Rational Vario Cooking Center, type: VCC 112T, serial number: E12vj20038046107, year of construction: 2020, 400 V, 3 Ph, 50/60 Hz, 13 kW, temperature: 30-250°C, water pressure: 150-600 kPa, volume: (2x) 14 liter, inside dimensions: (2x) 330 mm x 440 mm x 140 mm, total dimensions: 960 mm x 740 mm x 1040 mm. Including 2 s/s baskets.
Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 minâ»Â¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details.
Equipped with: type 2.3219.0001 (year of construction approx. 1995–2000) with a capacity of ±1,000–1,250 litres (up to approx. 1,300 L with collars), double spreading discs, working width of approx. 8–21 metres, PTO driven, suitable from ±70 hp, 3-point suspension Auction-ID: A1-40135-280
Complete cut-off grinding system manufactured in 2014. This HARALD BAUGMARTEN TM 400 S features a press force of 3500 kN and a cutting speed of approximately 30 mm/s at 500 kN. It includes a robust hydraulic system with a total drive power of 30 kW and a machine weight of around 13,000 kg. If you are looking to get high-quality cutting capabilities, consider the HARALD BAUGMARTEN TM 400 S complete cut-off grinding system we have for sale. Contact us for further details.
This 3-axis SCM TECH Z25 PLUS H-R4 was manufactured in 2005. It features a working area of 2500 x 1000 mm and a travel range of 2980 mm on the X-axis, 1280 mm on the Y-axis, and 200 mm on the Z-axis. The machine is equipped with 16 spindles operating at 4000 rpm and an electric spindle with a maximum speed of 18,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM TECH Z25 PLUS H-R4 machine we have for sale. Contact us for further details.
excluding tooling and machine clamps; Equipped with through-spindle cooling Auction-ID: A1-45793-2
SCM brand woodworking CNC machining center, Record 142 TV model, built in 2002 Manufacturer data Manufacturer: SCM Group Model: Record 142 TV Year of construction: 2002 Serial Number: A01/01352 Power supply: 400 V – Three-phase – 50 Hz Approximate weight: 5.800 kg Description CNC machine for the processing of wood panels and elements and derived materials. 3 Axes The machine is equipped with a mobile gantry, a shrouded machining head, as well as a vacuum table with suction cup clamping system for holding the workpieces during machining. Presence of a built-in tool magazine (number and type of tools not verified). The machine is supplied with a separate electrical cabinet, an integrated control console, as well as a conveyor/output table visible on site. A connection for suction is present. Visible equipment CNC vacuum table with suction cups Mobile gantry crane Faired machining hea ...
A complete machining line consisting of four Toyoda machining centers, Palltec transport and automation system, filter systems, chip conveyors and coolant supply systems is available. 1) 4x CNC horizontal machining center Toyoda FH 630 SX, year of manufacture 3/1: 2007/2008, control: Fanuc 31i, pallet dimensions X/Y: 630mm/630mm, travel X/Y/Z: approx. 1050mm/900mm/1050mm, max. workpiece diameter: 1170mm, max. workpiece height: 1250mm, max. pallet load: 1500kg, spindle taper: BT50, speed: 6000rpm, tool magazine: Fanuc FTS 330, tool positions: 330, operating hours range: approx. 65000h-76000h. All machining centers have the same tool management, but different operating hours within the above-mentioned range. 2) Rail-guided-vehicle system RGV Palltec FPA 630, year of manufacture: 2006. 3) Master computer system with Windows 7 Professional, interfaces: CNC/RGV/peripherals. The production lin ...
HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...
HAAS ST-30 CNC lathe was built in 2018 in the United States by HAAS AUTOMATION, INC. The machine on offer is an excellent choice for both unit and series production. It is capable of performing a number of complex operations, i.e. precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, reaches a maximum speed of 3400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. Tools taken from the 12-position turret are continuously measured and calibrated to guarantee maximum machining precision. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 is distinguished by its compact design, engineered with extreme rigidity and ...
To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.
CNC Bar Machining Center for Aluminum, Machine No. 1310031121, machining length max. approx. 7200 mm, tool turret 8-fold, spindle power max. approx. 5.5 KW, angle head saw unit, angle head drilling/milling horizontal 2 pieces, drilling/milling vertical 5 pieces, brackets 8 pieces, material tensioner 8 pieces, control Ferrocontrol (The article is in its condition as existing and unchecked. The article is sold from the foundation and without content/material! For the dismantling and loading of the item, there are no pallets, other packaging material available on site and the buyer must rent a forklift, tank rollers, machine jacks, etc. at his own expense if necessary! Attention: The Elumatec CNC bar machining center stands on a pedestal with a mesh floor. This area was the former ramp area. The mesh floor must not be driven on with a forklift. Important, bring drivable plates and tank roll ...
CNC Week Homag; 6.00 m in the X-axis; incl. rich accessories such as milling cutters; saws; swivel tools; etc. Then there are some controlled vices; many material suckers / suction pads. The main spindle was renewed once. There was also a software update. Stands unused for about 6 months. Auction-ID: A7-45983-6
Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible.
Technical data Manufacturer: CHEVALIER Model: FALCON-2033VMC Machine Type: Vertical CNC Machining Center Table size: 1000 × 450 mm Max. table load: 500 kg Travel (X/Y/Z): 650 / 500 / 500 mm Spindle mount: #40 Speed range: 60 – 6000 rpm⁻¹ Spindle motor: 7.5 kW Rapid traverse: 15 / 15 / 12 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool changer: 20 places Max. tool weight: 7 kg Dimensions set-up: 2740 × 2508 × 2755 mm Machine weight: approx. 4500 kg Configuration Tool magazine: 20-fold carousel Coolant pump: integrated Compressed air requirement: 5 kg/cm², 200 l/min Power requirement: 15 kVA (optional 20 kVA) Auction-ID: A7-45985-10
Number of tools 240 Tool holder BT 50 \"BIG PLUS\" Tool coding space-coded Tool breakage monitoring MOP Number of pallets 6 pallets Pallet size 630 x 630 mm X-travel 1000 mm Y-travel 900 mm Z-travel 1000 mm NC – round table division 0.001 ° Gear stages 2 R.P.M. 50 – 6000 Torque 606 Nm Rapid traverse 60 m/min Zero point determination Renishaw MP10 Zero point clamping system System 3R kW 30/22 Auction-ID: A1-45737-2
The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.
Make MIKRON Model VCE750 X Travel (longitudinal) 760 mm Y Travel (cross) 400 mm Z Travel (vertical) 500 mm Taper ISO 40 Table 360 x 910 mm Load 340 kg R.P.M. 10 – 7,500 KW 7.5 Cycles 50 Volts 400 A.T.C. 20 pos. Auction-ID: A1-45737-17
CNC VERTICAL MACHINING CENTRE Inv. No. 13.039M1 Make MAZAK Model AJV60/80 Control MAZATROL M-32 Year of manufacture 1989 Pallet size 1.250 x 2240 mm X-travel (longitudinal) 2.000 mm Y-travel (cross) 1,400 mm Z-travel (vertical) 508 mm Spindle ISO 50 TOOL CAT 50 Workpiece weight 15 kg R.P.M. 22 – 3.150 kW Volts Cycles Including: Chip conveyor spiral on-side of the table 40 Tool Magazine Auction-ID: A1-45737-8
CNC VERTICAL MACHINING CENTRE Inv. No.13.018M1 Make EUMACH Model MC-800P Control Heidenhain TNC360 Serialnumber 8056 X-travel 760 mm Y-travel 460 mm Z-travel 460 mm Table size 900 x 410 mm Spindle taper ISO 40 R.P.M. 0 – 8.000 kW 15 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-45737-129
CNC – Transl. Machining Centre Inv. No. 10.653MM Make UNISIGN Model Univers 4 Control Siemens Sinumerik 810D Travel X (Longitidinal) 1,600 mm Y (Cross) 400 mm Z (Spindle Height) 400 mm Taper ISO 40 Table 700 x 400 mm Load 600 kg Distance Spindle Nose to Table 150-550 mm R.P.M. 9.000 Main spindle kW 14 Rapid Traverse X,Y,Z 5-28,000 mm/min. Feed rate X,Y,Z 28,000 mm/min. A.T.C. 44 pos. Auction-ID: A1-45737-100
CNC VERTICAL MACHINING CENTRE Inv. No.13.164M1 Make DMG Model 63V Serial number 28850011162 Control Heidenhain TNC426M Year 2000 X-travel 630 mm Y-travel 500 mm Z-travel 500 mm Table size 500 x 800 mm Spindle taper SK 40 R.P.M. 8000 kW 13 Volts 400 Cycles 50 Including: Linear guide way Rear splash guard and chip tray. Automatic lubrication. Telescopic way covers. Chip conveyor ATC 24 positions Auction-ID: A1-45737-176
CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-45737-190
CONTROLS CNC controls HEIDENHAIN ITNC 620 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 .. among of them simultaneous CNC axes: 3 X-axis travel: 1000 mm Y-axis travel: 550 mm Z-axis travel: 550 mm TABLE table surface (left-right): 1100 mm table surface (front-back): 550 mm workpiece load (max): 800 kg SPINDLE / HEAD spindle type: vertical spindle revolutions (max): 10000 /min tool fixture: ISO SK 40 drive power: 13.5 kW AXIS DRIVES feed velocity (max): 10000 mm/min rapid traverse X: 36000 mm/min rapid traverse Y: 36000 mm/min rapid traverse Z: 36000 mm/min TOOL MAGAZINE magazin type: disc magazine number of positions: 30 t ...
CONTROLS CNC controls HEIDENHAIN I TNC 530 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 4 X-axis travel: 540 mm Y-axis travel: 540 mm Z-axis travel: 560 mm TABLE table surface (left-right): 700 mm table surface (front-back): 520 mm SPINDLE / HEAD spindle revolutions (max): 8000 /min tool fixture: ISO SK 40 AXIS DRIVES feed velocity (max): 20000 mm/min rapid traverse: 30000 mm/min TOOL MAGAZINE number of positions: 21 tool diameter max.: 80 mm - with free neighbour positions: 160 mm tool length max.: 385 mm tool weight max.: 6.8 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requireme ...
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production Auction-ID: A7-46048-9
Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-46048-30
Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm Auction-ID: A7-46048-264
Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-46048-32
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet Auction-ID: A7-46048-7
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2008 Serial Number: 1820031 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Machine weight: approx. 8,000 kg Configuration Siemens CNC control Double station / multi-sided machining Automatic tool changer Chip conveyor (KNOLL) Cooling lubricant and filter system (KNOLL) Full fairing Suitable for series production Auction-ID: A7-46048-6
Weinig Unicontrol 10 – CNC window production system incl. tool package For sale is a professional Weinig Unicontrol 10 CNC window production machine, designed for the complete machining of window scantlings – including cross-cut saws, tenon milling, profile unit and automatic feed system. The machine is equipped with several milling spindles, a sawing unit and a wide range of accessories, including high-quality tool sets. (including slitting and milling tools, complete set is suitable for 68 mm large pieces of wood and a Euro fold) The condition is good for its age, the machine was in use until the end. Ideal for timber construction companies or carpenters with their own window production. Auction-ID: 03A-BWU-3
LID MAHO DMU 125 T hi-dyn 3-axis CNC universal machining center Control: Heidenhain MillPlus Year of Make: 2002 Powerful and robust 3-axis machining center from DECKEL MAHO. Ideal for complex milling operations in tool, mould and machine construction. Travels • X-travel: 1,250 mm • Y-travel: 880 mm • Z-travel: 800 mm Main spindle • Speed range up to 18,000 rpm⁻¹ • Drive power: 15 / 10 kW • Max. torque: 500 Nm • Tool holder: SK 40 Work table • Table clamping surface: 1,500 × 1,050 mm • Max. table load: 2,500 kg • Number of T-slots: 10 • T-slot width: 18 H7 mm • T-slot spacing: 100 mm Tool Changer • 30 tool positions • Max. tool diameter: 80 mm • 160 mm with free adjacent position • Max. tool length: 315 mm • Max. tool weight: 8 kg • Max. total weight in the magazine: 100 kg Feeds • Rapid traverse ...
Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet Auction-ID: A7-46048-2
Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg
Reading hours: approx. 67,741 h (machine) / approx. 21,617 h (spindle) Equipped with: 60-fold tool change magazine, (1x) chip conveyor (2017), (1x) cooling/filter unit with pumps and control cabinet, oil mist separator. Auction-ID: A1-45979-2
Performs all functions Auction-ID: A3-43519-9035
Maximum tool weight: 7kg, Maximum tool length: 300mm. Equipped with: (1x) 16-way tool changer, (1x) chip conveyor, (1x) cooling/filter unit, (1x) spindle cooler, (1x) external cooling unit. Auction-ID: A1-45979-4
maximum number of results exceeded
please refine your search
5.500 € 
