milling center used for sale

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions

x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D rotary table: 800 mm c-axis: 0.001º ( ±360º) 0 B-axis (table): +25 / -110 º mm number of spindle speeds: 18.000 U/min/rpm tool taper: HSK 63 Tools changer: 38 fach/tools Internal cooling system: 80 bar handwheel: total power requirement: 43 kVA weight of the machine ca.: 10,6 t dimensions of the machine ca.: m Equipment- Paper belt filter – 200 l tank- Active control cabinet cooling- Infrared probe M&H (Heidenhain)- Laser tool measuring system Blum- Chip conveyor- Cleaning pistol with pump 2 bar / 40 l min- 3D Quick Set- Electronic handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Vertical Machining Center "KUNZMANN BA 1000 SK" With track control Heidenhain iTNC 530 Year of Make: 2013 Travels: X 1020 Y 620 Z 920 Speed range: 1 – 14,000 rpm infinitely variable With the following accessories: Rigid angle table 1200 mm x 610 mm clamping surface NC Attachment Rotary Table WALTER 0 500 mm B Axis Swivel Head (Torque Drive) + 30 / - 120 degrees Vertical tool changer with 40 magazine positions ( SK 40 ) 3 D Probe Heidenhain Electronic handwheel Fixed full protective cladding with interior lighting IKZ plant Coolant Setup Oil mist extraction Chip conveyor Operating instructions

The machine is in good technical condition, testing is possible after prior agreement. The machine is mechanically worn (play in the table axes approx. 0.1 mm). The gearbox is currently not shifting (when trying to change gear, there is no signal about shifting).

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm   Y-axis travel: 450 mm   Z-axis travel: 450 mm   rotating range B-axis from: -115 °   rotating range B-axis up to: 30 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   clamping surface diameter: 450 mm   workpiece load (max): 200 kg SPINDLE / HEAD   spindle revolutions (max): 20000 /min AXIS DRIVES   rapid traverse X: 22000 mm/min TOOL MAGAZINE   number of positions: 220 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4400 mm   space req ...

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 90 mm shaft -made of: gunmetal -Number: 2x bearings available -Price: per piece -Dimensions: 130/130/H160 mm -Weight: 4.7 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 100 mm shaft -made of: gunmetal -Number: 3x bearings available -Price: per piece -Dimensions: 160/125/H155 mm -Weight: 12 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 35 mm shaft -made of: gunmetal -Number: 1x warehouse available -Price: per piece -Dimensions: 70/49/H65 mm -Weight: 1.1kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gunmetal -Number: 10x stock available -Price: per piece -Dimensions: 92/70/H82 mm -Weight: 2.3 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 55 mm shaft -made of: gunmetal -Number: 50x stock available -Price: per piece -Dimensions: 90/68/H85 mm -Weight: 2.1 kg/piece

revolving point, revolving center point, revolving Morse taper, revolving center point, revolving lathe point, center point -Manufacturer: Stieber % Nebelmeier, revolving center point with adapter set unused -Types: RKN 3 DM 4-22 -Recording: MK3 / MK4 -Price / fee: complete -Dimension box: 270/180 / H65 mm -Weight: 3 kg

Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA07 -Shaft: Ø 25 x 75 mm -Measurements: see photos -Quantity: 4x angular gear available -Price per piece -Dimensions: 335/130 / H120 mm -Weight: 5.6 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, angular gear -Cardan shaft: angular gear, unused -Type / order no .: 21001375 402027/201 7610AVA08 -Shaft: Ø 32 x 80 mm -Measurements: see photos -Number: 10x angular gear available -Price per piece -Dimensions: 390/160 / H165 mm -Weight: 11.1 kg / pc.

Cardan shaft, cardan shaft, universal joint, center bearing, holder -Cardan shaft: center bearing, unused -Type / order no .: 21001375 402027/201 7610AVA06 -Inside: O 44 mm -Measurements: see photos -Number: 12x holders available -Price: per piece -Minimum order: 4 pieces -Dimensions: 147/93/30 mm -Weight: 0.6 kg / pc.

live center, live center, live morse taper, live center, live lathe center, live center, slip-on center, heavy duty live center -Manufacturer: Roterberg Drehmeister, revolving center point slip-on point -Type: 80 TGL 30-2325 -Recording: see photos -Center point: Ø 50 - 148 mm -Total dimensions: Ø 149 x 220 mm -Weight: 9.8kg

Centering device, centering unit for bending machine, straightening machine, sheet metal straightening machine, strip straightening machine, strip straightening device, sheet metal straightening system, for eccentric press, hydraulic press -Manufacturer: Schied: centering device -Hole distance: 300/90 mm O 13 mm -Dimensions: see photos -Total dimensions: 460/160/H160 mm -Weight: 17.5kg

fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Manufacturer: WMW ABW, fixed centering tip with mounting bore -Recording: Morse cone MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price: per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc.

live center, live center, live morse taper, live center, live lathe center, live center -Manufacturer: Röhm / unknown, revolving center points 2 pieces -Type: Röhm 102N MK2 / without type designation -Intake: MK2 -Price/delivery: complete -Transport dimension: 160/100/H50 mm -Weight total: 2 kg

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: Bruckner, live centering tip, centering cone Type: unfortunately without a type designation -Recording: MK5 -Centering tip: Ø 60 mm -Dimensions: Ø 120 x 315 mm -Weight: 9.6 kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center center -Manufacturer: Röhm, rotating centering tip type 110 H -Barrel tip: shaft-mounted -Recording: MK5 -Quantity: 1x centering tip available -Price per piece -Dimensions: Ø 90/257 mm -Weight: 4.4 kg

revolving center, revolving center point, revolving Morse taper, revolving center point, revolving lathe center, center point, centering taper -Manufacturer: Bruckner, rotating center point centering cone -Type: unfortunately without type designation -Recording: MK4 -Centering tip: Ø mm -Dimensions: Ø 58 x 203 mm -Weight: 1.6 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK4 -Dimensions: Ø 60 x 200 mm -Transport dimensions: 200/185/H65 mm -Total weight: 5.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Bruckner, rotating centering point centering cone 3 pieces -Type: unfortunately without type designation -Recording: MK3 -Dimensions: see photos -Transport dimensions: 180/16/H60 mm -Total weight: 3.0 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, revolving center points 5 pieces -Type: Röhm 108H MK4 / 108HVL MK4 / 3x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 290/230/H80 mm -Weight: 9.6 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Röhm / unknown, rotating centering points 3 pieces -Type: Röhm 110HVL MK5 / 2x without type designation -Recording: MK5 -Price/Delivery: complete -Transport dimensions: 280/270/H95 mm -Total weight: 14.3 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, rotating centering points 3 pieces -Type: Röhm 114H MK6 / 2x without type designation -Recording: MK6 -Price/Delivery: complete -Transport dimensions: 390/360/H120 mm -Total weight: 33.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: Haack / Bruckner / Röhm, revolving centering points 4 pieces -Type: Röhm 158 MK4 / Bokö Perfekt 4P / 2x without type designation -Recording: MK4 -Price/Delivery: complete -Transport dimensions: 230/210/H70 mm -Total weight: 8.2 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: 200/200/H285 mm -Weight: 10.1 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone, centering ball, centering mandrel, centering chuck, pipe centering chuck, live centering chuck -Manufacturer: Kondamat, centering chuck pipe centering chuck -Recording: MK4 -Dimensions: see photos -Dimensions: Ø 78 x 230 mm -Weight: 2.7 kg

End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg

Key data: 1050 mm, 510 mm, 510 mm

Inv. Num. : 9045 Type: VCN-510C Producer: MAZAK Created: 2005 Parameters: Control system: MAZATROL 640M NEXUS Work table length: 1300 mm Work table width: 550 mm Maximum table load (uniform): 1200 kg Speed: 12000 1/min X-axis travel: 1050 mm Y-axis travel: 510 mm Travel Z-axis: 510 mm Machine weight: 7100 kg

CONTROLS   CNC controls MORI SEIKI MSC 500 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 560 mm   Y-axis travel: 410 mm   Z-axis travel: 460 mm TABLE   table surface (left-right): 900 mm   table surface (front-back): 450 mm   workpiece load (max): 300 kg SPINDLE / HEAD   spindle revolutions (min): 80 /min   spindle revolutions (max): 8000 /min   tool fixture: ISO BT 40 TOOL MAGAZINE   number of positions: 20 ELECTRICAL SPECIFICATIONS   mains power supply: 15.5 kVA DIMENSIONS / WEIGHTS   space requirements -left/right-: 2210 mm   space requirements -front/back-: 2242 mm   total height: 2723 mm   total weight approx.: 4200 kg

Inv. Num. : 9047 Type: VF 0 Producer: HAAS Created: 2001 Parameters: Work table length: 660 mm Work table width: 356 mm Maximum table load (uniform): 1361 kg Maximum vertical spindle speed: 7500 1/min X-axis travel: 508 mm Y-axis travel: 406 mm Travel Z-axis: 508 mm Machine weight: 3630 kg

- Usable working area approx. 5000 x 1400 mm. - Axis C. - Tool magazine with 18 positions. - Electrospindle: power 7.50 KW, automatic tool change, for HSK F63 tool holder. - Vertical holes in the x-axis direction: 11. - Vertical holes in the y-axis direction: 11. - Horizontal holes in the x-axis direction: 1 + 1. - Horizontal holes in the y-axis direction: 1 + 1. - Edging unit with edge loader for 2 coils. - IMA numerical control. - 8 benches. - Lifting modules for heavy parts. - SIEMENS 2BL1100-2NC00-1S-Z vacuum pump, 2.35 KW motor. - Tools (10) and add-ons (3) that appear in the photographs are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-18

Find more here - / Contact us at -

Model: Mori Seiki MV-653/50 (Year 2000) Travels (X/Y/Z): 1530 x 660 x 650 mm (60" x 26" x 25.6") Table Size: 1700 x 660 mm (67" x 26") Spindle Taper: CAT 50 / BT 50 Spindle Speed: 6,000 RPM (High Torque) Motor Power: 22 kW (30 HP) ATC Capacity: 30 Stations Machine Weight: 16,000 kg (35,270 lbs) Find more here - / Contact us at -

Find more here - / Contact us at -

Core Technical Specifications (2001 Model)The "70" in the name typically refers to the X-axis travel (approx. 700 mm).FeatureSpecificationX-axis Travel710 mm (Standard)Y-axis Travel520 mmZ-axis Travel520 mmB-axis (Swivel)-10° to +95° (NC-controlled)C-axis (Rotary)360° (NC-controlled)Table SizeØ 700 mm x 500 mm (NC Swivel-Rotary Table)Max. Table Load350 kgSpindle Speed12,000 RPM (Standard) up to 18,000 RPMTool TaperSK 40 or HSK 63Tool Magazine30 to 64 positions

Find more here - / Contact us at -

Key data: 630 mm, 630 mm, 630 mm

Spindle replacement 12/2018 Technical data: Manufacturer: Heller Type: H1000 Control: Siemens 840D SL Year of construction: 2008 (commissioning 2010/11) Travel X/Y/Z: X 630 mm, Y 630 mm, Z 630 mm Travel B-axis: 360° Working spindle Speed: 10,000 rpm (Kessler) Tools Tool changer: 54-fold Tool holder: SK40 Pallet changer: 2-fold Pallet size L/W: 500 x 400 mm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Direct measuring system Drill Break Detection Chip conveyor Knoll coolant system with high pressure

Manufacturer: Schuco Model: AS100 Throughput Center Year of Manufacture: 2020 and 2022 Type of Machine :CNC 5-Axis Machining Center Layout Version: MA6 Machine Dimensions - Total Length: 22,300 mm - Total Width: 7,123 mm - Total Height: 3,058 mm - Machining Zone Width: 5,357 mm - Loading/Unloading Magazine Width: 7,500 mm - Magazine Depth: 1,766 mm Connections Required - Power supply (electrical connection) - Compressed air - Network connection - All connections to be provided from above Key Features - Two fully equipped 5-axis machining towers - Five self-driven clamping vices - Combined loading and unloading magazine - Profile buffer capacity: up to 12 profiles lying flat, up to 16 profiles standing - Unmanned operation capability for up to 16 profiles - Six-sided profile machining - Variable gripper system compatible with all profile geometries - Integrated saw station and n ...

Manufacturer: Schuco Model: PBX AL Year of Manufacture: 2003 and 2008 Type of Machine : CNC Machining Centre Control System: Schuco-CAM with Windows operating system A-Axis: Continuous rotation from +90 to -90 degrees via servo axis Machining sides: 3-sided profile machining without reclamping Technical Specifications - Number of CNC Axes: 4 - Machining Length: 7,200 mm - Simultaneous Profile Capacity: up to 6 bars (optionally up to 8 bars) - Clamping Vices: 6 automatic, designed for double-bar machining (optionally 8) - Profile Stops: 2 pneumatic (optionally 3) - Machining Width - Front Bar: 250 mm - Machining Width - Rear Bar: 120 mm - Machining Height: 200 mm - rive Motor Power: 5.5 kW - Spindle Speed Range: up to 18,000 rpm - Motor Power from: 5.5 kW at 7,000 rpm - Tool Holder: SK 30 - Max. Disc Cutter Diameter: 120 mm - Max. End Mill Diameter / Length: 50 mm / 160 mm - Trave ...

travel -x axis: - mm travel -y axis: - mm travel -z axis: - mm control: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/min tool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC & pallet changer. The machine is in a well-maintained condition, works in Switzerland. The machine and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment.

travel -x axis: - mm travel -y axis: - mm travel -z axis: - mm control: HEIDENHAIN - iTNC 530 number of spindle speeds: 18.000 U/min tool taper: HSK-A63 5-axis simultaneous machining center | HERMLE - C 20 U equipped with ITC & pallet changer. The machine is in a well-maintained condition, works in Switzerland. The machine and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 22 | C22 | C-22 | C22U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 762 mm, 508 mm, 610 mm

Hurco VMX 30 Year 04/2007 Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Spindle holder SK 40 Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Control HURCO WinMax ver. V8 01.09.25... Options see pictures Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m Interior was painted, scrapers of the telescopic covers were renewed. Machine can be viewed under power by appointment. Price is net plus VAT. Freely loaded onto trucks

Awea BM 1200 vertical machining center X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table dimensions: 1,350 x 600 mm Maximum Table Load: 1,200 kg Spindle Mount: BT-40 Total Machine Weight: approx. 8,500 - 9,000 kg Ground Clearance (W x D): 3,200 x 2,400 mm Maximum Height: 2,600 mm Auction-ID: A7-44885-10

Masterwood Project 523 XL CNC machining center • Year : 2006 • Axes : X 6200 mm / Y 1660 mm / Z 175 mm • Drilling head: 40 chucks, inverter-driven• Saw unit: longitudinal incisions • Electrospindles : 2 x 8 kW ISO30 (including one with C-axis ) • Tool magazines:  2 x 8 quick positions • 12 Schmalz bars with double vacuum zone • Digital display for bar positioning and suction cups • Predisposition for vices and clamps • Side and front stops • 2 panel lifting blades • Chip collection belt • Mobile remote control • Vacuum pump: 250 m³/h • Suction : 1 mouth Ø250 mm + 1 mouth Ø120 mm (flow rate 6500 m³/h) • Power supply: 400 V / 41.7 A / 50 Hz• Weight  : 5500 kg  ...

MORI SEIKI MH 40 FANUC horizontal machining centre X-axis travel: 560 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Pallet size: 400 x 400 mm Table Rotation (B-Axis): 360° (with minimum division 1° or 0.001°) Spindle Mount: BT-40 Spindle Speed: 6,000 rpm Tool Changer (ATC): 40 Total machine weight: approx. 9,500 - 10,500 kg Floor Dimensions (W x D): Approx. 2,300 x 4,200 mm Height 2350 mm Auction-ID: A7-44885-21