milling center used for sale

Key data: 600 mm, 525 mm, 500 mm

Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial.no.063 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled

Key data: 710 mm, 520 mm, 520 mm

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm

Emco F3 - Milling Machine - Vise - Workplace lighting - Coolant device - Tools & Machine Feet Technical data Working Range: - Slide path longitudinal: 300 mm - Slide path transverse: 200 mm - Vertical slide path: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Vertical milling head swivel: ± 90 ° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Groove spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: Pull-out screw M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slides: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (infinitely variable) - Rapid traverse: 1200 mm/min Coolant Facility: - Tank capacity: 30 l - Flow rate: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% ED) - Speed: 1400 / 2800 rpm Dimensions: - Dimensio ...

Milling machine, water slot milling machine, window production machine PERTICI UNIVER ML142 year: 1995 x, y, z- travel: 100 mm milling depth: 0 - 50 mm Operating voltage: 380 V Power: 0.50 mmbr /br / 6 kW - pneumatic workpiece voltage - manual feeds used, tested ! Dimensions: 1600 x 1000 x 1300 mm

Surface comparison plate set, roughness measures MASSI Planing, face milling, turning TGL 4763 Planing: Rz 6,Rz 3 μm - Rz 160 μm Face milling: Rz 6.3 μm - Rz 80 μm Turning: Rz 3.2 μm - Rz 80 μm in 3 wooden boxes used, tested ! Dimensions: 345 x 125 x 105 mm

Milling head PAGUS Outer Ø thread: 41.8 mm square 10 x 10 mm used, tested ! Dimensions: 250 x 200 x 400 mm

Milling cutter, H, schl. Zahnst. Group milling cutter FETTE K HSS E ( KHSSE ) Module 0.8 EW 20° DIN 3972 BP I

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

Travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. Documentation available. An on-site inspection is possible. Individual sale possible.

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning o ...

AUERBACH AX 5 B CNC bed milling machine was built in 2009 in Germany by Auerbach Maschinenfabrik GmbH. It is an extremely efficient machine designed for even the most demanding production challenges. The AUERBACH AX5 B enables the machining of large, heavy workpieces that are used, e.g. in the aerospace and automotive industry. The machining process is performed fully automatically on the rotary table by means of a 5-axis swivel workhead. This solution enables comprehensive machining of workpieces in a single work cycle, without the need for repositioning them. The workhead is equipped with an electro-spindle rotating at a maximum speed of 12000 rpm. It provides the excellent dynamics required for both roughing and finishing operations. The cutting tools, on the other hand, are continuously cooled to increase their overall service life. The AUERBACH AX 5B CNC machining center is offered  ...

Angle milling cutters, indexable insert milling cutters WIDAX, HEINLEIN, WIDIA 01-000546-002-2 274.274.06.119.00 diameter: Ø 242 mm 6 cutting edges with 6 holders each for inserts bore: Ø 31 mm (milling cutter side) / Ø 21 mm / Ø 40 mm (rear) flange (rear) Ø 90 mm groove width (rear) 16 mm, Depth 10 mm New ! Dimensions: 250 x 250 x 90 mm

Tool holder, milling holder, milling tool, milling mandrel -Milling tool holder: SK40 tool holders -Cutter holder: Ø 6 mm -Number: 35 milling tool holders available Price: per piece -Dimensions: Ø 64 / 120 mm -Weight: 0.9 kg

Super clean 1993 Bridgeport EZ trak SX 2 axis mill. Machine is in very nice condition. It has none of the usual battle scars from use and appears to have been used very little. The control boots up as it should and both axis motors work smoothly. SPECIFICATIONS: Capacity 9" x 48" Table Size 9" x 48" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Speeds (Variable) 60-4200 RPM Spindle Taper R-8 Spindle Quill Travel 5" Positioning Speed (X-Y Axis) 100 IPM Feed Rate (X-Y Axis, Variable) 0.1-100 IPM Spindle Quill Feeds (3) 0.0015" - 0.003" - 0.006" Ram Travel 12" Distance, Table To Spindle Nose 2 1/2" - 18 1/4" Throat Distance 6 3/4" - 18 3/4"

Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm

Key data: 2500 mm, 1600 mm, 1000 mm

Stock number: 3949 CNC BED MILLING MACHINE Manufacturer: SORALUSE, Type: TL-25 Machine NO.: 101016, Year of manufacture: 1998 Specifications: Table size 2860 x 1000 mm Large table load 7500 kg Longitudinal movement (X) 2500 mm Transverse movement (Z) 1000 mm Vertical movement (Y) 1600 mm Spindle Taper 50 ISO Stepless spindle speeds 20-3000 rpm Spindle motor power 22 Kw Total power 38 kW Tool changer 30 stations Control Heidenhain TNC 426/430 CB Fabr. Controlled vertical head 2.5 degrees Spindle Hours 12272 Hours Rapid traverse 15 m/min Accessories: Cooling by spindle Chip conveyance. Cooling water system. Electronic handwheel Line measuring system Various accessories. Length: 9500 mm, Height: 3820 mm, Width: , Weight: Approx 25.000 kg

Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm

OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC Cutting, Drilling, Nesting, and Milling Capabilities H10 Spidle Head 3-Axis Capabilities Dual Becker Industrial Vacuums Automatic Tool Length Measuring System Low Maintenance Bridge Design w/ Gantry Drive 28 Spot Linear Tool Holder Includes (20) Different Tool Heads 10" and 6" Suction Tubes Dual 24" Control Monitors Label Maker and Printer Includes Auto Voltage Transformer Software License Not Included Specifications Model Year: 2016 Processing Table Size: 146" x 61" Finish Table Size: 152" x 61" Max Motor Power: 10 kW Motor Speed: 24,000 rpm Tool Holder Places: 28 Number of Tool Heads: 20

Milling cutter mandrel, tool holder, with tightening thread WMW 3 x 25 x 160 ( 3x25x160 ) TGL 30-4113 MK3 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 425 x 45 x 45 mm

Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmGeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Main drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (40% DC)22,5 kWDrive power (100% DC)19 kWTorque (100% DC)85 NmTorque (40% DC)120 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33  ...

AVIA FNE 50N CNC milling machine was built in 1998 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is fully operational and has been regularly serviced throughout its service life. The AVIA FNE 50N was designed for precision machining of workpieces made of, e.g. steel, cast iron or aluminium. The machining process is performed inside a large work space by means of a reliable spindle with stepless rotational speed adjustment. When removed from the head, the spindle can operate both vertically and horizontally, with the same parameters. The work table with a length of approximately 1250 mm and a width of 500 mm, on the other hand, has T-slots for easy mounting of workpieces and tooling. All this is complemented by an intelligent HEIDENHAIN controller, offering convenient operation and access to many advanced functions. The AVIA FNE toolroom milling machine weighs 3000 ...

Key data: 1200 mm, 600 mm, 500 mm

Dialog 11 Control Travels 1200 x 600 x 500 Max. spindle speeds 5000/rpm Spindle drive 12 kW Tool holder SK40 Quill stroke 80 mm, weight approx. 7000 kg. Accessories el. Handwheel, coolant device. The machine is in very good condition.

The 2005 Deckel Maho DMC 104 V linear is a CNC (Computer Numerical Control) vertical machining center manufactured by Deckel Maho, a part of DMG MORI. This machine is known for its precision and efficiency in machining tasks, including milling, drilling, and tapping. Here are some key features and specifications of the 2005 Deckel Maho DMC 104 V linear: - Travel and Table Size: - X-axis travel: Approximately 1040 mm - Y-axis travel: Approximately 600 mm - Z-axis travel: Approximately 500 mm - Table size: Large enough to accommodate substantial workpieces - Spindle: - Spindle speed: High rotational speeds for efficient cutting - Spindle power: Sufficient for heavy-duty machining tasks - Linear Drives: - Equipped with linear drives for the X, Y, and Z axes, providing higher precision and faster movements compared to traditional ball screw drives. - Control System: - Typically equip ...

Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, mounting bracket -Milling chuck: MK4 chuck -Shaft: Ø 27 mm -Shaft length: 520 mm -Dimensions: Ø 44 x 665 mm -Weight: 5.6 kg

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 13 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/400/H80 mm -Total weight: 24.5 kg

Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter, intermediate sleeve, reducing sleeve -Type: SK50-SK40-70 -Recording: SK50 -Holder tool: SK40 -Dimensions: Ø 98 x 180 mm -Weight: 3.6 kg

2009 Elumatec SLK 118 A template-free copy milling machine type SLK 118 from elumatec from 2009, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling attachments: Adapter, intermediate sleeve, reducing sleeve -Recording: SK50 -Recording tool: MK4 -Dimensions: Ø 98 x 195 mm -Weight: 2.9 kg

GOMAD FG-2 TOP SPINDLE MILLING MACHINE – year 2016 SPINDLE ROTATION 6000 - 18000 RPM. VERTICAL TRAVEL OF SPINDLE 125 MM VERTICAL TRAVEL OF TABLE 150 MM DISTANCE OF SPINDLE AXIS FROM THE BODY 760 MM HEAD TURNING ANGLE +45° -45° TABLE DIMENSIONS 1180 X 700 MM ELECTRO-SPINDLE SOCKET ER 32 BUSHING RACK COLLET FOR BURRS 01 -020 ELECTRO-SPINDLE 5.6 KW REQUIRED AIR PRESSURE 0.6 MPA DIAMETER OF SAWDUST EXTRACTION NOZZLE 80 MM SAWDUST AIR VELOCITY 25 M/S COOK 750 KG Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK40 chuck -Shaft: Ø 27 mm -Dimensions: see photos -Dimensions: Ø 58 x 370 mm -Weight: 1.7 kg

InfoTEC 2515 Energy CNC router was built in 2017 in Poland by 4CNC Sp. z o.o. The machine is designed for the production of precise, repeatable parts made of a wide range of materials, i.e. wood, plastics and light metals. Its versatility and cost-effectiveness make it an excellent choice for companies with diversified production profiles. Materials are machined on a large work table using a brushless HSD spindle with automatic tool changing (ATC) system. This system allows the use of several tools in a single machining cycle, significantly saving the time required for changeover of the workhead. What’s more, the innovative control system has been integrated with powerful digital AC servo motors to achieve excellent dynamics and feed repeatability. The InfoTEC 2515E CNC milling machine weighs approximately 2200 kg. Technical specifications of the InfoTEC 2515 Energy milling machi ...

2007 Union Bielefeld BF 400 U2 Bed milling machine. Mechanically it is completely fine, but there is a defect in the control system. no Machine is no longer used at all. All motors are running and mechanically everything is fine. I cant say what exactly is wrong with the control system. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used 5x axis 5k hours was used for Aluminum and stainless steel 48 place tool changer 8 meter travel table Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling tool holders: SK40 16 pieces -Type: various designs, see photos -Price/Fee: complete -Transport dimensions: 400/300/H150 mm -Total weight: 37.7 kg

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Drive rings: for attachment milling mandrel, 19 pieces -Type: Ø 13 to 40 mm -Quantity/Size: see photos / parts list -Submission/Price: complete -Transport dimensions: 200/120/H80 mm -Total weight: 4.4 kg

JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...

Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FANUC O1 Machine length : 1350 mm Machine width : 2760 mm Machine height : 2615 mm Machine weight : 3500 kg Control unit: Enac-I Spindle speed range : 10000 1/min Spindle motor power : 7.5 kW X-axis travel : 500 mm Y-axis travel : 400 + 210 mm Travel of the Z-axis : 300 + 80 mm Maximum table load: 500 kg Table dimensions: 700 mm x 400 mm

Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Reiden Model: BFSH Condition: used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 3200 × 1000 Table Size: 1000 × 1000 Control System: Heidenhain TNC 1550 Spindle Hub: 350 × 350 Tool Holder Spaces: 130 Travel (X, Y, Z): 3000 × 1000 × 800 Max Weight: 5000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Year: 2018 - technically efficient, ready to work - after full service - motor: 2.2 kW - automatic hydro-pneumatic feed - pneumatic profile clamping - quick cutter change system - cooling-lubrication installation

New Leveling Milling Head for Muller Martini Perfect Binder

X / Y / Z = 400 x 300 x 350 mm Feeds in the 3 axes Rapid traverse in 2 axes ISO 40

Stock number: 3975 PROCESSING Manufacturer: CHEVALIER, Type: 2040 VMC Machine NO.: MC925B02, Year of manufacture: 2003 Specifications: Table size 1200 x 450 mm Longitudinal movement (X) 1020 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Spindle Taper 40 ISO Stepless spindle speeds 8000 rpm Spindle motor 7.5 Kw Total power 15 KVA Tool changer 20 places Control Fanuc 0M Fabr. Operating hours spindle 4032 hours Length: 2350 mm, Height: 2650 mm, Width: 2750 mm, Weight: 5800 kg