127,856 used machines on RESALE, but how to find them? Machine Search
Key data: 2 mm, 810 mm, 700 mm
General Manufacturer: Spinner Type: MVC1600-B Year of Make: 2006 Switch-on hours: 30,240 h Control: Siemens 810D ShopMill Travels: X 1,600 mm Y 810 mm Z 700 mm Spindle Speed: 6,000 rpm Power: 25 kW Tool holder: SK50 Tool Changer Number of stations: 24-fold with double arm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Blow-out device for spindle High-pressure system IKZ 26 bar Preparation 4th axis Preparation of workpiece probes
DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy
CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T, Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower), 2x C-Axis, Swarf conveyor, IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy
Inv. Num. : 8135 Type: MCV 750 A speed Producer: MAS Created: 2020 Parameters: Control system: Heidenhain 640 Number of axes: 4 pieces Minimum vertical spindle speed: 12000 1/min X-axis travel: 750 mm Y-axis travel: 500 mm Travel Z axis: 500 mm Number of all tools: 24 pieces Rapid traverse X/Y/Z: 40000/40000/40000 mm/min Total power: 50 kW Machine height: 2500 mm Machine length: 3400 mm Machine width: 3110 mm Machine weight: 5250 kg Equipment: Chuck TOS UIS 200/4-1-M2; TOS UIS 250/4-2-M1
x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
control: Siemens Sinumerik 840D table load: 0,7 t work piece spindle speed: 200 - 2300 U/min total power requirement: 12 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
fixed point, fixed center point, fixed Morse taper, fixed center point, center points -Toe angle: 60° -Recording Morse cone: MK5 -Number: 17x centering tips available -Price: per piece -Weight: 2 kg/piece
Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm
Centering vise PAGUS jaw height: 50 mm span: 0...95 mm on table with graduation 360° rotatable Dimensions: 330 x 255 x 160 mm
Centering disc, tube clamp PAGUS Ø 300 - 340 mm used, tested ! Dimensions: 340 x 340 x 50 mm
fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg
Spindle with centering tip, clamping device PAGUS clamping range: 145 mm base plate 215 x 100 mm shaft diameter: Ø 40 mm Handwheel diameter: Ø 250 mm Dimensions: 600 x 250 x 250 mm
Centering Vise, Centric Clamp PAGUS Jaw Width: 100 mm Jaw Height: 55 mm Wingspan e: 0...70 mm can be rotated on carriage with millimeter scale - 70 - + 70 mm on a rotary table with graduation: - 90° - + 90° 360° rotatable ! used, tested ! Dimensions: 270 x 270 x 140 mm
Centering vise, centrifugal clamp PAGUS jaw width: 200 mm jaw height: 50 mm span: 0...200 mm on rotary table with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm
Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm
MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...
BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...
x-travel: 1050 mm y-travel: 560 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bridge type Machining Centre NICOLAS CORREA EURO 2000 - 18.000 rpm - capacity 2000x1250x650 mm, CNC SELCA 4045, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 2000x1000 mm, Longitudinal travel x axis: 2000 mm, Cross travel y axis: 1250 mm, Vertical travel z axis: 650 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 30.000 mm/1, Rapid feed x-y-z axes: 30.000 mm/1, Spindle taper type: HSK 63, Automatic tools change nr.: 40, Spindle speed: 0- 18.000 rpm, Spindle motor power: 20 Kw, Cnc: SELCA 4045, Approx net weight: 20.000 Kg, Accessories: through-spindle coolant, chip conveyor
2002 Deckel Maho DMU 50T still in use, can be viewed Find more here - / Contact us at -
Fully functional 3-axis milling machine of the brand Micromill with 16-fold tool changer. 3-axis vertical machining centre Micromill Challenger MM-430 with FAGOR 8055 i/A control This machine does not have internal spindle cooling. The spindle was replaced by the previous owner 2 years ago and then only ran for 3 months in 1-shift operation (estimated approx. 500 h). Machine run perfectly. Dimension: Length (without chip conveyor) = 2784 mm (table cladding), 2200 mm (full cladding) Width = 1996 mm (table cladding), 1848 mm (full cladding) Height = 2304 mm (table cladding), 2412 mm (full cladding) Weight = 3000 kg Space requirement = 3600 mm x 3100 mm M a x . Power consumption = 35 KVA All axes: KUVE 35 X-axis guide distance: 300 mm Y-axis guide distance: 620 mm Z-axis guide distance: 400 mm further specifications in the pdf files Find more here - / Contact us at -
MAKA Systems GmbH Type: PA 37 Year of construction: 2006 Machining length: 11 m Operating hours: 23.792 Spindle exchange: 08/2018 MAKA CNC 5-axis machining center PA 37 for machining of aluminum profiles and (with clamping surface to be realized clamping surface) for aluminum sheets / plates. machining. Version with NC support crosshead positioning and with widened machine base frame to accommodate the required required drag chains, and with hydraulic workpiece clamping. Machine in travelling gantry design with drive on both sides (gantry drive). CNC-control BWO 930 in mobile operating- for 5-axis milling with RTCP function, memory 1 mB, with integrated PC with low power processor 1 GHz, hard disk 120 gB, with Windows-XP, 10" touch-screen display with touch-screen computer keyboard. Connections: 1 x VCS for screen, 4 x USB, 1 x mouse, 1 x keyboard, 1 x RS 232, ...
Key data: 1630 mm, 860 mm, 760 mm
Basic machine data Used 3-axis machining center from HURCO Make: HURCO Type: VMX64 Year of Make: 2006 Condition: Used - In working order Control: Name: HURCO Ultimax 4 CNC Track Control Drive power: 285 kW Travels: x-travel: 1630 mm // y-travel: 860 mm // z-travel: 760 mm Technical data: • Spindle 25-8000 rpm • SK 50 interface • Clamping table size: 1650 mm x 9000 mm • 32-fold tool changer • Feed range: 1-18000 mm/min • IKZ • Dividing head type Kitagawa NC 300 rotary and swivel table • Chip conveyor The machine is in good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
ELHA machining center - The operating hours amount to 30,350 hours. Regarding the operating hours, it must be mentioned that due to the discontinuation of the last article run on the centre, it has not been used for production since the beginning of 2021. Due to a transport system that is currently still connected to the machining centre in terms of control technology, the machining centre could not be disconnected from the power supply, so it had to remain switched on and the operating hours increased despite the fact that production was no longer taking place. The effective operating hours of the machining centre during which production took place on the centre are therefore just under 11,500 to 12,000 hours. Find more here - / Contact us at -
Key data: 3200 mm, 750 mm, 695 mm
Basic machine data Used 5-axis machining center from HEDELIUS Make: HEDELIUS Type: Tiltenta 7 Magnum Year of Make: 2016 Condition: very good Control: Name: Heidenhain iTNC 530 Handwheel: Heidenhain Travel: x-axis: 3200 mm // y-axis: 750 mm // z-axis: 695 mm Technical data: • Spindle: 50-12,000 rpm • SK40 interface • Fixed machining table with integrated NC rotary table • Ø table: 750 mm • Max. workpiece weight: 800 kg • B-axis infinitely variable: + 98°/- 98° • 50-fold tool changer • Max. tool length: 330 mm • Feed speeds: up to 40 m/min • IKZ (internal coolant supply) • 500 L tank with paper belt filter • Chip conveyor Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.
2013 Ibarmia ZVH 45/L1600 Extreme 4 axis vertical machining center Type: ZVH 45/L1600 Extreme Manufacturer: Ibarmia Year: 2013 Control: Fanuc X- 1600 mm Y- 800 mm Z- 900 mm Rotation angle +/-105° Maximum spindle speed 12000 rpm Number of tools in the magazine: 24 Work table dimensions: 2000 x 850 mm Included a wall that divides the table into two parts, so it is possible to machine separately in one part and clamp in the other part Machine in good condition, under power. Find more here - / Contact us at -
2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - / Contact us at -
2012 Chiron DZ 12 KWM HS 328-03 Profile CNC machining centre Chiron milling machine - double-spindle - with pallet changer - HSK-A63 Accessories and tools are not included. We still have a few holders (shrink fit chucks) that we can provide. A chip conveyor from Knoll is included, as well as a cooling tower from DeltaTherm. Technical data Year of construction 2012 Axis travel: X 550 / Y 400 / Z 360 mm Spindle distance in X-axis: 250mm Weight: 7700kg Tool magazine: 16 places per spindle Tool holder HSK-A63 Fanuc 31i-A5 - 5-axis contouring control Fanuc tool life monitoring Integrated workpiece changing device IWW 0/180° Spindle speed 15000 rpm, max. 45Nm Speed acceleration / deceleration from 0 to 12000 rpm in 0.6 seconds Chip conveyor with scraper belt Coolant system KF 150/FKA500 Chiron maintenance instructions on screen Operating hours and parts counter Oil-fre ...
Control: FANUC Series O-M, with tool magazine, coolant system, central lubrication, electrical cabinet, air conditioning unit and spindle oil cooler HARBOR OILCON HBO-250 PT, year of manufacture: 1991. An on-site inspection is possible.
2010 Toyoda FV 1165 CNC vertical machining center Type: FV 1165 Manufacturer: Toyoda Year: 2010 Control: Fanuc X: 1100 mm Y: 650 mm Z: 600 mm Toolchanger: 40 positions Work table dimensions: 1300 x 650 mm Chip conveyor Machine in good condition, under power. Find more here - / Contact us at -
The Partner M300 is a versatile machine used for various metalworking and machining tasks. It is designed to handle complex operations such as drilling, milling, and turning, making it suitable for manufacturing and production environments. This machine is ideal for precise and efficient shaping of metal parts, catering to industries requiring high accuracy and repeatability. Technical Specifications: - Dimensions: 1,900 x 2,300 mm - Weight: Approximately 4,500 kg - Electrical System: AC 380V, 50 Hz - Machine Color: RAL 6011 green - Cooling System: Included - Work Area Lighting: Included Pallet Details: - Pallet Size: 315 x 315 mm - Pallet Indexing Angle: 7.5 degrees - Indexing Accuracy: +/- 2 seconds - Repeat Accuracy: +/- 1 second - Clamping Force: 3,400 kg - Maximum Workpiece Weight: 150 kg Travel Paths: - X-Axis: 400 mm - Y-Axis: 300 mm - Z-Axis: 495 mm - Distance Between Spind ...
Number of axes: 3, control: Fanuc OMA, operating hours: 4708h, with tool magazine. An on-site inspection is possible.
Connected load: 16kVA, control: FANUC Series 0-M, with carousel tool magazine, coolant system with external chiller HABOR Unit, spindle cooling, enclosed working area (full enclosure), handwheel (MPG) vorhanden, manual clamping devices on table and transformer separately in the control cabinet. On-site inspection is possible.
An old Stama machining center is available. Tool positions: 10, travel path X/Y/Z: 500mm/380mm/400mm, table dimensions X/Y: 700mm/380mm, tool holder: SK30, speed: 7500rpm, drilling capacity in steel: 30mm, machine dimensions X/Y/Z: approx. 2350mm/2550mm/2750mm, weight: approx. 2500kg, control: Fanuc 6MB. An on-site inspection is possible.
Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.
Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible.
Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible.
Manufacturer: Matec Model/Type: 30 L Year of Manufacture: 2004 Power Requirements: - Voltage: 400V - Power Consumption: 62 kW Find more here - / Contact us at -
Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -
Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible.
Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible.
turning diameter:1390 mm turning length:14000 mm weight of the machine ca.:13 t More information can be found in the Appendix.
maximum number of results exceeded
please refine your search
10 € 
