milling center used for sale

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 455 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 400 V total power requirement: 0,75 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm solid column to avoid vibration gear wheels in oil bat left and right turning precision setting for milling depth with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table-size: 820 x 240 mm spindle taper MT: 3 mx. distance bet.vert. milling head and table: 445 mm bore depth: 130 mm max. distance between table and spindle-nose: 445 mm turning speeds: 75-3200 U/min transmission ratio: 12R/12L head swivability: 45 ° quill stroke: 130 mm : 230 V total power requirement: 1,1 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 920 x 740 x 1000 mm ?solid column to avoid vibration ?gear wheels in oil bath ?left and right turning ?precision setting for milling depth ?with drawbar (M12) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 30 kW tool adaptor: ISO 50 Torque: 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

Travel XYZ: 300-135-270 Spindle holder: Iso 30 Spindle speeds: 100-2000 Table size: 600x195 Automatic feed to the X-axis Manual speed on the X-axis Fraeskop 360° rotating Tilt table li and re rotate 30° Cowlmittel pump With vice With tool holder ER25 with some collets CE marking

Machine Details Warehouse number 1105-03373 Machine type Konsolfräsmaschine - universal VERNIER brand Type VS 3 Year of construction 1985 Conventional control type Storage location FRANCE Country of origin France Delivery time immediately Freight base from stock Technical details x-displacement 900 mm y-way 300 mm z-way 600 mm Table: 1200 x 300 mm Number of T-slots 3 Number of feeds 18 Feed range 14 - 710 mm/min Rapid path vertical 1 m/min Rapid path longitudinally 3 m/min Speed 45 - 2000 rpm Total power requirement 4 kW Machine weight approx. 2.4 t Information can be folded down to horizontal milling machines with rotatable and swivelling vertical head, Feeds in all 3 axes, DIGITAL DISPLAY DEVICE rapid passages,

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Technical data Number of axis total: 4 Table length: 1600 mm Table width: 800 mm Number of T-channels: 5 T-channel width: 22H8 mm Distance of the T-slots: 160 mm Height of table above floor: 890 mm Table load max.: 4000 kg Longitudinal travel (X-axis): 1500 mm Transversal travel (y axis): 1000 mm Vertical travel (z axis): 1000 mm Taper in spindle:: 50 SK Spindle speeds: number (steps): 2 stepless from: 30 rpm up to: 930 / 3500 rpm Feeds (X, Y, Z): 1 - 6000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 400 Volt Milling spindle motor: 22 kW Total power required: 42 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 7360 mm Width: 5120 mm Height: 2700 mm Various accessories: Table 4th axis CNC Handwhee ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 300 mm Table width: 120 mm Longitudinal travel (X-axis): 150 mm Transversal travel (y axis): 100 mm Vertical travel (z axis): 150 mm Spindle speeds: number (steps): 6 from: 125 rpm up to: 4000 rpm Taper in spindle:: 12 W Voltage 50 Hz 3x: 380 Volt Motor output: 0.3 HP Total power required: 0.5 HP Machine´s weight about: 140 kg Overall dimensions machine: Length: 650 mm Width: 600 mm Height: 1400 mm Various accessories: Steady Universal table

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 185 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Distance from horizontal spindle to table: 310 mm Spindle speeds: number (steps): 8 from: 95 rpm up to: 1500 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 116 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 2.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 900 mm Height: 1500 mm Various accessories: Universal table Lamp

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 800 mm Table width: 300 mm Longitudinal travel (X-axis): 495 mm Transversal travel (y axis): 292 mm Vertical travel (z axis): 399 mm Distance from horizontal spindle to table: 480 mm Spindle speeds: stepless from: 50 rpm up to: 3400 rpm Taper in spindle: 40 ISO Feeds stepless: longitudinal from: 10.0 mm/min up to: 600 mm/min transversal from: 10.0 mm/min up to: 600 mm/min vertical from: 10.0 mm/min up to: 600 mm/min Vertical quill travel: 45 mm Rapid traverse: longitudinal: 1.5 m/min transversal: 1.5 m/min vertical: 1.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 4.0 HP Total power required: 5.0 HP Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1800 mm Various accessories: Coolant syst ...

Table length: 1240 mm Table width: 550 mm Longitudinal X: 1000 mm Cross Y: 508 mm Vertical Z: 460 mm CNC Brand: Mazatrol CNC Model: Mazatrol M-32 X - Travel:              1000mm Y - Travel:              508mm Z - Travel:              460mm Table Length:            1240mm Table Width:             550mm Table load:              800 Spindle Taper:           40ISO/Bt/Mk Power on spindle:        18,5kW Speeds / ranges:         4000Rpm ATC / revolver:          30 Number of controlled axis:3 Chip conveyor:           Yes Coolantsystem:      ...

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Spindle taper: 0   Number of spindles: 0   CNC Brand: 0 CNC Model: 0 Technical data Working table: Width: 200 mm Slide sweep table: Width: 80 mm Pantograph: Extreme ratio: min. 1:: 2.20 min. 1:: 6.0 Voltage 50 Hz 3x: 220 Volt Machine´s weight about: 20 kg Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 120 mm

Special price for stock goods! Only while stocks last! Drilling-milling machine: Bernardo Type/Model: FM 45 HSV with digital display Condition: new Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Knife head milling cutter max.: 80 mm Projection: 220 mm Spindle speed: (12) 75 – 3200 rpm Spindle holder: MK 4 Pinole stroke: 120 mm Pinole feed: (3) 0.10 / 0.18 / 0.26 mm/U Table size: 800 x 240 mm Travel (x / y): 555 / 205 mm Milling head swivel: -60° to +60° Distance spindle / table: 60 – 485 mm Height adjustment milling head: 425 mm T-slot size: 14 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1140 x 770 x 1500 Weight approx.: 308 kg without base Characteristics: - High-torque 2-stage motor, speed range 75 - 3200 rpm - Double-sided swivelling m ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Distance from vertical spindle to table: 260 mm Spindle speeds: number (steps): 8 from: 95 rpm up to: 2000 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 232 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Universal table Vertical milling head

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 180 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Spindle speeds: number (steps): 8 from: 95 rpm up to: 1500 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 116 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1400 mm Various accessories: Rotary table:diameter Steady

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 300 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y axis): 170 mm Vertical travel (z axis): 410 mm Distance from vertical spindle to table: 320 mm Spindle speeds: number (steps): 18 from: 60 rpm up to: 2400 rpm Taper in spindle: 40 ISO Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 216 mm/min vertical from: 6.0 mm/min up to: 108 mm/min Rapid traverse: longitudinal: 1.0 m/min vertical: 0.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1200 mm Width: 1100 mm Height: 1600 mm Various accessories: Coolant system Rigide table Quick drill and milling head Lamp

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 600 mm Table width: 300 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y axis): 170 mm Vertical travel (z axis): 410 mm Distance from vertical spindle to table: 320 mm Spindle speeds: number (steps): 18 from: 60 rpm up to: 2400 rpm Taper in spindle: 30 ISO Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 216 mm/min vertical from: 6.0 mm/min up to: 108 mm/min Rapid traverse: longitudinal: 1.0 m/min vertical: 0.5 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 800 kg Various accessories: Coolant system Steady Rigide table

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 180 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 110 mm Vertical travel (z axis): 280 mm Spindle speeds: from: 80 rpm up to: 2800 rpm Taper in spindle: 30 ISO Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1600 mm Various accessories: Steady Universal milling head Set of long cutter arbors Set of short cutter arbors Tool cabinet

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 0i-MC Technical data Number of axis total: 3 Table length: 2000 mm Table width: 600 mm Number of T-channels: 5 T-channel width: 20 mm Distance of the T-slots: 125 mm Longitudinal travel (X-axis): 1700 mm Transversal travel (y axis): 1050 mm Vertical travel (z axis): 950 mm Distance from vertical spindle to table: 0 - 753 mm Distance from horizontal spindle to table: 0 - 290 mm Distance from spindle axis to slide ways: 650 mm Spindle speeds: stepless horizontal from: 45 rpm up to: 1500 rpm vertical from: 45 rpm up to: 1500 rpm Spindle nose: BT: 50 Feeds (X, Y, Z): 30 - 6000 mm/min Rapid traverse:: 6 m/min Spindle motor: 15 HP Total power required: 35 kW Machine´s weight about: 7500 kg Overall dimensions machine: Length: 3490 mm Width:  ...

Key data: 600 , 200 , 300

Table length: 600 mm Table width: 200 mm Longitudinal X: 300 mm Cross Y: 135 mm Vertical Z: 300 mm Technical data Table length: 600 mm Table width: 200 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 1500 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 232 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 620 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Steady Universal table Vertical milling head

Key data: 600 , 200 , 300

Table length: 600 mm Table width: 200 mm Longitudinal X: 300 mm Cross Y: 135 mm Vertical Z: 300 mm Technical data Table length: 600 mm Table width: 200 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 2500 rpm Taper in spindle:: 20 W Feeds steps:: 8 longitudinal from: 12.0 mm/min up to: 232 mm/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 500 kg Various accessories: Coolant system Steady Universal table Vertical milling head

Key data: 600 , 190 , 300

Table length: 600 mm Table width: 190 mm Longitudinal X: 300 mm Cross Y: 135 mm Vertical Z: 300 mm Technical data Table length: 600 mm Table width: 190 mm Longitudinal travel (X-axis): 300 mm Transversal travel (y axis): 135 mm Vertical travel (z axis): 300 mm Spindle speeds: number (steps): 8 from: 100 rpm up to: 1500 rpm Taper in spindle:: 20 W Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Machine´s weight about: 600 kg Various accessories: Vertical milling head

1 Milling machine CB Ferrari S70

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Replacement spindle overhauled for Hurco VMX 24S Speed: up to 15,000 rpm Refurbished: February 2013 by SN-Spindeltechnik with test protocol

Type: DMU 60T Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 40 kW Admission in millinghead: SK40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton

Deckel Maho DMU50e DMU 50 Evolution Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 380 mm Power on spindle: 25/35 kW Type of millinghead: SK 40 Spindlespeeds: 20 > 18 000 rpm Table size: Ø 500 x 380 mm Control: Heidenhain Power needed: 38 kVa Length: 4000 mm Depth : 2500 mm Height: 2700 mm Weight: 5 ton Toolholder: yes Number of tools: 32 tools

X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg

Road milling machine Fabr. Wirtgen Type: W 50 DC 1 hand ; good condition few operating hours

Asphalt milling machine used Fabr. Wirtgen Type W 350 1 hand, good condition

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

Rotary milling machine.Auto copy shaping machine with profile sander LH-100-4PS This equipment can be applied on first rough copy-shapings. No matter they are round, oval, rectangle or irregular profiles, all can be roughly copied and shaped out at one time. It can save much time if using band saw for first rough cuttings. Technical specifications: Max shaping capacity- 2250mm x 1100mm Disc dia -1800 mm Round disc revolving speed-0,5-3 RPM Main spindle revolving speed-9000 RPM Main spindle dia -30 mm Shaping cutter dia-100 mm Driven wheel dia -100 mm Round disc driving power-3 HP Main spindle driving power-10 HP x 2 Sander power-3 HP x 2

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN 426 Technical data Number of axis total: 3 Table length: 2800 mm Table width: 1000 mm Longitudinal travel (X-axis): 2500 mm Transversal travel (y axis): 1000 mm Vertical travel (z axis): 1000 mm Table load max.: 6000 kg Spindle speeds: stepless up to: 3000 rpm Tool magazine number of tools: 30 Spindle nose: ISO: 50 Voltage 50 Hz 3x: 400 Volt Milling spindle motor: 26 kW Total power required: 36 kW Machine´s weight about: 20000 kg Overall dimensions machine: Length: 7750 mm Width: 3100 mm Height: 4400 mm Various accessories: Feeler Renishaw: MP-18 Chip conveyor Set of toolholders

SPECIFICATIONS: Single chain Vertical machining Table enviable Equipped for the processing of doors.

Universal bed milling machine make NIIGATA type 2 UMCMachine -No: 62950 Year 1986Table size: 1370 x 310 mmTable longitudinal path = X: 870 mmTransverse travel = Y: 370 mmVertical travel = Z: 400 mmDistance table to spindle: 50 - 450 mmSpindle mount: ISA 5012 spindle speeds: 40 - 1750 rpm.9 longitudinal and transverse feeds: 20 - 800 mm / min9 vertical feeds: 9 - 355 mm / minRapid traverse longitudinal and transverse: 3000 mm / minRapid traverse vertical: 1375 mm / minDrive power: 5.5 kWFeed motor: 1.5 kWDimensions L x W x H: 1825 x 2005 x 1745 mmWeight approx: 3000 kgWith- 3-axis digital display Anilam- Milling head can be swiveled from vertical to horizontalused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead

Univ. Bed milling machine make NIIGATA type 3 UMAYear 1978Table surface: 1600 x 380 mmTable longitudinal path X: 1000 mmTransverse Y: 420 mmVertical path Z: 400 mmSpindle mount: ISA 5016 spindle speeds: 45 - 1400 rpm9 feeds longitudinal and transversal: 20 - 800 mm9 vertical feeds: 5 - 200 mmRapid traverse longitudinal and transverse: 3000 mm / minxa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0xa0 vertical: 750 mm / minMax. Table load: 700 kgMax. Distance between stand / spindle: 470 mmMax. Distance table / spindle head: 70 - 470 mmDrive power: 11 kWWeight: 3.9 tExternal dimensions: 2245 x 2280 x 1830 mmused, despite the year of construction ingood conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.B ...

Bed milling machine make NIIGATA type 2 UMBFabr. -No: 26064S5316 Year 1973Table clamping surface: 300 x 1370 mmTable movement lengthwise = X: 870 mmTable movement across = Y: 280 mmVertical movement of the milling head = Z: 380 mmmin/max. Distance between table and clamping surface: 50/430 mmDischarge of the milling head: 330 mmSpindle mount: ISA 50Milling head can be swiveled horizontally to vertically12 spindle speeds: 40-1750 rpm9 feeds longitudinal and transversal: 20-800 mm / minvertical: 9-355 mm / minRapid traverse longitudinal and transverse: 3 m / minvertical: 1375 mm / minSpindle drive 380 V: 3.7 kWFeed drive 380 V: 1.5 kWSpace requirement: 2780 x 1750 x 1800 mmWeight: 2400 kgWith- 3-axis digital display- Cooling deviceused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not ...

Horizontal bed milling machine make ERNAULT SOMUA type Z 1 CFabr. -No: 104470/333, built in 2/1970Table mounting surface: 1200 x 300 mmTable movement lengthwise: 700 mmY: 250 mmZ: 400 mmSpindle taperSpindle speeds Horizontal: 50 - 2500 rpmSpindle speeds Vertictal: 40 - 2000 rpmautomatic feeds f. along u. across the limit switchMotor power spindle approx.: 3 kWexternal dimensionsWeight approx: 1760 kgWith- Additional track control / cam control via connector panel- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Horizontal milling machine / horizontal bed milling machineMake VEB HECKERT type FBEW 630x2000Fabr. -No: 353514, built in 1977Technical specifications:Table size: 2000 x 650 mmTable width: 750 mmMachining length X: 2000 mmMachining length Z: 800 mmConnected load: 24 kWExternal dimensions L x W x H: 5300 x 2250 x 2530 mmControl cabinet: 1000 x 850 x 1800 mmWeight approx: 7.5 twith- retractable quill- separate control cabinet- rapid traverse- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION

CNC bed milling machine make HURON type FXMachine -No: 890187 built in 1989Technical specifications:Working area X: 900 mmWorking area Y: 520 mmWorking area Z: 600 mmSpindle mount: ISA 40stepless speed range: 30 - 3150 mmTable size: 1000 x 700 mmmax.table load: 1300 kgTable height: 700 mmFeed rates X Y Z: 0 - 4000 mm / min.Feed force X Y Z: 5500 Nmax.feed force: 7700 NMotor power: 11 kWDimensions approx: 3000 x 2000 x 2500 mmWeight approx: 8000 kgWith- CNC control Heidenhain TNC 355- hydraulic tool clamping- hydraulic gear switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

CNC tool milling machine make DECKEL type FP 4 AMasch. Nr: 2284 0273 Year 1983 with GRUNDIG pattern control with screenworking areaX-way longitudinal: 485 mmY-way cross: 385 mmZ-way vertical: 380 mmPinolenweg: 80 mmVertical milling head displaceable on the headstock: 150 mm18 spindle speeds: 50 - 2500 rpm.Feed infinitely variable: 2 - 1000 mm / minRapid traverse X, Y and Z: 2000 mm / minSpindle mount: ISA 40Table surface v. Angle table: 800 x 460 mmpermitted table load: 400 kgDrive power: 3.7 / 4.4 kWOutside dimensions approx .: 1200 x 1750 x 2000 mmWeight approx .: 2000 kgWith- fixed angle table- aut. Tool clamping- Screen route control- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offeran ...

KNUTH MF5V Universal Milling Machine YOM 2005 Germany X-travel 800 mm Y-travel 390 mm Z-travel 380 mm Spindle taper ISO SK 40 Speed 70 - 3600 rpm Quill feed 3 steps- 0,04/ 0,08/ 0,15 mm/r Quill travel 127 mm Distance spindle nose- table min./max. 50 / 456 mm Distance spindle center to column min./max. 57 / 603 mm Table dimensions 1370 x 250 mm Table load 350 kg Total power requirement 3,75 kW Machine weight approx. 1590 kg dimension machine approx.LxWxH 2,1 x 3,1 x 2,3 m Accessories: Vices, 3 tool holders

CNC console milling machine make MEXPOL JAFO type FXH 400 NBMachine -No: 0505 built in 1984Table clamping surface: 400 x 1250 mmTravel X-axis: 900 mmTravel Y-axis: 250 mmTraverse Z-axis: 450 mmTool holder: ISO 5016 spindle speeds: 56-1800 rpm.continuously variable feed rates X and Y axis: 2-2000 mm / minstepless adjustable feed Z-axis: 1-1000 mm / minRapid traverse X- and Y-axis: 3200 mm / minRapid traverse Z-axis: 1600 mm / minDrive power: 11 kWDimensions: 2800 x 2990 x 2150 mmWeight approx. 3600 kgWith- Railway control HEIDENHAIN TNC 151- Horizontal holderused, from one operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC universal tool milling machine make AUERBACH type FUW 725Fabr. -No: 021 Year 1992Table size fixed angle table: 1000 x 500 mmTable load: 500 kgTravel X-axis lengthwise: 725 mmTravel Y-axis transverse: 525 mmTraverse Z-axis vertical: 505 mmTool holder: ISO 40Quill stroke: 80 mmSpindle speeds: 25 - 5000 rpm.Operating voltage: 3890VDrive power: 10 kWDimensions W x D x H: 2600 x 3800 x 2350 mmWeight approx. 4100 kgWith- Complete housing- CNC control PHILIPS CNC 3460- 20-fold tool changer KELCHused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.