milling boring floor used for sale

disk brush 350mm; squeegee width 450mm; clear water tank 20L; Recovery 25L; work capacity 1350m/h; Voltage 24V; Power 900W; brush disk motor 400W; suction motor 500W; battery monitor; Charger; manual; key-card; 7531 Auction-ID: A1-49373-202

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-49373-620

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1500W; self-driven; battery monitor; light; speed regulator; horn; Charger; manual; 7534 Auction-ID: A1-49373-73

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-49373-205

70 liters; 65db ; digital control panel ; 500w ; 4866 Auction-ID: A1-49373-502

24V/32Ah; clean water tank 10L; dirty water tank 15L; work efficiency 1350m2/hour; unused in transport crate; 6744 Auction-ID: A1-49373-621

disk brush 400mm; squeegee width 580mm; clear water tank 25L; Recovery 30L; work capacity 1500m/h; Voltage 12V; Battery 40Ah212V; Power 900W; brush disk motor 400W; suction motor 500W; 2000RPM; battery monitor; build-in Charger; manual; 7532 Auction-ID: A1-49373-204

2 power supplies (backup) 450W Hot Plug Device neutralized, RUN Time tested, data erased and internally cleaned, 2 processors, EP400i Model: TX 2550 M5 Processor/ CPU: 2 x Intel Xeon Silver 4208 2.10GHZ 8 cores per CPU Board: D3386-B1 Core: /Processor: 2 Processors Installed Hard Drive/SSD: (2x) 960 GB SSD RAM: 36 GB DDR4 PSU: 2x Graphics: Matrox G200e Drive: DVD Multidrive Network connection: 4 x RJ-45 i350 Gigabit Interfaces: 3x LAN, 4x USB 3.0 (rear), DVD, VGA Auction-ID: A1-49308-55

Dismantled and palletized structure, ready for loading. Approximate surface area: 35 x 23.50 m, or approximately 822 m² Load capacity: 500 kg/m² Height: 300 cm 30 mm thick wooden floor 2 stairs included White sandwich panels not included The structure has already been dismantled and palletized. Loading the truck is done free of charge for the buyer. Auction-ID: A1-49935-21

Softwood floor planks with a working size of 28×135×2150 mm, suitable for indoor application. The boards are equipped with a GG profile (groove/groove) and are connected to a separate fish mouth, which ensures neat alignment and stable assembly. The beams are pressure impregnated (KDI) and colored brown. Auction-ID: A1-45099-2143

2 power supplies (backup) 450W Hot Plug Device neutralized, RUN Time tested, data erased and internally cleaned, 2 processors, EP400i Model: TX 2550 M5 Processor/ CPU: 2 x Intel Xeon Silver 4208 2.10GHZ 8 cores per CPU Board: D3386-B1 Core: /Processor: 2 Processors Installed Hard Drive/SSD: (2x) 960 GB SSD RAM: 36 GB DDR4 PSU: 2x Graphics: Matrox G200e Drive: DVD Multidrive Network connection: 4 x RJ-45 i350 Gigabit Interfaces: 3x LAN, 4x USB 3.0 (rear), DVD, VGA Auction-ID: A1-49308-56

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A1-40897-500

Floor fireplace ESTELLE - White| Freestanding Bio-Ethanol Column Fireplace | Steel housing in white; Body: powder-coated steel, burner chamber matt black; Sliding door with viewing window made of safety glass; Burner: Stainless steel; Model 9017-12 , 2-chamber burner with ceramic wadding; Capacity 1.5 ltr.; Infinitely variable consumption 0.5-0.8 litres/hour; Burning time approx. 2-3 hours; 39 x 39 x 151 cm (width x depth x height); Weight: 32.5 kg; for indoor use; 96% denatured for use with bio-ethanol; complies with European DIN standard 4734-1; Heat output 2-3 kW Auction-ID: A1-49989-12

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-49902-71

Each floor equipped with touch control; Equipped with stainless steel height-adjustable bridge insertion function; chamber size approximately 1650x1180x150 mm; overall size of the setup 2150x3200w2500 mm; equipped with extractor hood; Auction-ID: A1-49547-6

464m PVC sill. PVC molding I-X. PVC molding BEECH. PVC molding 03 white/black. PVC molding 04 white/brown. Auction-ID: A7-49492-28

608m Floor PVC mask Floor PVC mask Beech H-100 Smooth. Floor mask 09 White/Syginge H-100. Plum floor mask. Floor mask Cherry. Auction-ID: A7-49492-26

floor scrubber Brand: Kremer Type: KRM30 Function: Scrubbing and drying in 1 cycle Capacity: 1350 m² per hour Brush diameter: 350 mm Holding tank: 15 litre holding tank Clean water tank: 10 liter clean water tank Number of motors: 2 motors Battery: 24 V / 32 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46156-1097

Unused; 300x300mm; Thickness 20mm; tiles are connectable to eachother Auction-ID: A1-49902-72

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46156-1096

559,8m PVC sill. PVC molding cherry 001. PVC molding walnut. PVC molding triangle. PVC molding 019 - indian marble. PVC molding 07 - red marble. PVC molding 08 - GREEN marble. PVC molding - marble. Auction-ID: A7-49492-27

Equipped with Kennis R11.000 crane 1x extendable up to 11 meters 1x steering axle Auction-ID: A1-47416-76

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Mezzanine Floor. Suitable for furniture and textile storage. Auction-ID: A1-47360-5

Equipped with 1x lifting axle and 1x steering axle equipped with Hiab 130F2 crane 2x extendable to 6.5 meters max lifting weight 3770 kilos equipped with heavy side beam and stanchion pots Auction-ID: A1-47416-75

Equipped with: Steel staircase with grid steps, system profiles perforated, original calculations available, 36 meters of handrail (steel) present, column pressure on concrete floor max 11180 kg! Complete with mounting material! Mezzanine Floor. Suitable for furniture and textile storage. Auction-ID: A1-47360-3

1X lifting axle 2x steering axle equipped with 2001 Knowledge 16,000 crane 3x extendable up to 7.10 meters max 4500 kilos Auction-ID: A1-47416-78

Control: Heidenhain TNC 360 (1992) Table size: 1000 x 1000 mm Table size with front extension: 1345 x 1000 mm Table load max.: 2000 kg Distance spindle centre to column min/max.: 270 ~ 1270 mm Distance spindle nose to table min/max.: 0 - 1100 mm Distance between the upright columns: 1855 mm Table longitudinal travel : 1400 mm Boring ram carriage cross travel: 900 mm Crossrail vertical travel: 850 mm Boring spindle travel: 370 mm Spindle motor rating: 6 KW Spindle speed range: 30 - 1500 rpm Boring spindle diameter: 82 mm Spindle taper: MK 5 Borer diameter: 2 - 70 mm Boring tool diameter: 17 - 450 mm Boring diameter in solid ST 60: 45 mm Boring diameter in solid Cast iron: 70 mm Equipped with: Tooling; Accessories Machine overhauled and retrofitted in 1992 !; Very good

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

- Structure in stainless steel - Workpiece fixing system - Table adjustable - 2 milling spindles - 2 multifunction drilling spindles - Switch box

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Win ...

bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head adjustable to left and right til 360°, • with sturdy bottom-table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Heidenhain TNC 124 Year of construction 1996 Spindle holder ISO 40 Travel 310 x 170 x 340 mm 16 spindle speeds from 40 - 2500 rpm Infinitely variable feeds Weight approx. 700 kg

TOS W 75

BFT 90/3 SPINDEL 102 , ISO

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 124 Year of construction: 2001 Travels: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic Handwheel for X, Y, Z Axis Splash protection booth Machine light 4 pcs. Height-adjustable machine shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital display Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 – 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axle Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axis Machine light 4-Piece Machine Shoes Coolant system Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICESHIP TRAINING THE MACHINE IS IN GOOD CONDITION

X axis travel 12.000mm Max height under head 1.800mm Y axis travel 3.200mm Z axis travel 1.000mm W axis travel 2.100mm Table dimensions 12.000 X 3.000mm Max weight on table 60 ton Spindle power 47 Kw Max spindle speed 4.000 Rpm CNC SIEMENS 840 D Head changer with nr.04 heads ATC 60 utensili Rebuilt year 2008

YOM 2009 X axis travel 28.000mm Y axis travel 6.500mm W axis travel 2.000mm Z axis travel 1.500mm Table dimensions 25.000X5.000mm Automatic head changer with Nr. 03 heads Nr.10 planos 5.000X2.500X300mm CNC SIEMENS 840 D nr.03 axes automatic head in continuos, spindle speed max 4.000rpm,56 Kw, HSK A 100 Vertical head max spindle speed 3.000rpm,56 Kw, HSK A 100 Angular head max spindle speed 3.000rpm,56 Kw, HSK A 100 High pressure refrigeration trough spindle (50 bar) ATC 120 positions

SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - volt. 380/50 - S/N 333 - year 1995

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic swivel table as shown in the pictures. Further information on request

TOS ,W 100 , YEAR 1976, SPINDEL MORSEA

workpiece diameter: 125 mm grinding depth: 50 mm clamping length: 2000 mm total power requirement: 0,5 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _______________________________________________________ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm Max.weight of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head ...


Universal tool milling machine TOS FNGJ 32 3 Axis Heidenhain Digital Display Year of Make: 1999 Travel: X 600 Y 400 Z 400 Speed range: 40 – 2000 rpm With the following accessories: Rigid angle table 800 x 400 mm clamping surface Vertical milling head Extendable drill quill Various tool holders SK 40 Safeguard Chip tray Machine Light Automatic central lubrication pump for X,Y,Z axis Coolant Setup 4 pcs machine shoes

x-travel: 410 mm y-travel: 310 mm z-travel: 400 mm table-size: 700 x 280 mm control: Heidenhain TNC 145 tool adaptor: SK40 turning speed range: 40- 2.000 U/min rapid speed: 1,5 m/min feed speeds: 1500 mm/min power requirement: 2.2 kW quill stroke: 63 mm weight: 1,3 t total power requirement: 2,2 kW weight of the machine ca.: 1,5 t dimensions: 1,4 x 2,1 x 2,0 m Features: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with spindle sleeve - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions