milling boring floor used for sale

New electric scrubber drier, floor cleaning machine KREMER type KR-FL50AByear of construction 2024Theoretical area output 2000 mª/ hWorking width 510 mmCleaning brush 510 mmBrush speed 175 rpm. Suction lip width 850 mmTank volume pure water: 50 litresTank volume dirty water: 50 litresNoise pollution 66 dBaClimbing capacity 2%Battery voltage 24 volts, 100 AH- battery charger 24 volts- battery 24 volts, 100 AH- one cleaning brush- two separate tanks- without drive drive, the device

Electric walker trucks, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EJE 116Masch. No: 90281103 year of construction 2007Nominal load capacity: 1600 kgLifting height: 200 mmFork length: 1150 mmOperating voltage: 24 VoltTotal length: 1750 mmTotal width: 730 mmHeight with drawbar: 1300 mm- Battery from year of construction 2013, type 24V 2PzS 250 (24 Volt, 250 AH)- Battery automatic charger- 5575 operating hours read. Weight approx. 560 kggood condition; used

Electric walking forklift, low-floor pallet truck, ant, pedestrian stacker JUNGHEINRICH type EJE 22G-20-235-56 (L)Masch. No.: 80405795 year of construction 1996Nominal load capacity: 2200 kgLifting height: 200 mmFork length: 2350 mmOperating voltage: 24 VoltTotal length: 3050 mmTotal width: 690 mmHeight with drawbar: 1350 mm- Battery from year of construction 2007, Type 2 EPZS 230 (24 Volt, 230 AH)- Battery automatic charger- 8890 operating hours read. Weight approx. 560 kggood condition; used

Electric walking forklifts, low-floor pallet trucks, ants, pedestrian stackers JUNGHEINRICH type EME 112Masch. No: 90145339 year of construction 2005Nominal load capacity: 1200 kgLifting height: 200 mmFork length: 1170 mmOperating voltage: 24 voltsTotal length: 1550 mmTotal width: 700 mmHeight with drawbar: 1300 mm- 2 pieces traction batteries NEW from year of construction 2024, type 12 volts, Ah 55- integrated automatic charger, type E 230 G 24/6 (24 volts, 6 amps)Weight: approx. 175 kggood condition; used

Conveyor belt, belt conveyor, belt conveyor, belt conveyor MTFMasch. No: Year of construction approx. 2015Effective length: 3200 mmBelt width: 490 mmBelt length: approx. 6550 mmFrame profile height: 47 mmPulley diameter: 30 mmBelt speed: 6 m/min. to 48 m/min. Conveyor belt height: approx. 960 to 1400 mmMotor power: 0.25 kWNet connection: 230 volts, 50 Hz.- infinitely variable belt speed via ABB frequency converter, type ACS150-03E-01A2-4- belt drive via RGM geared motor- belt body made of aluminium profile with stainless steel sheet metal cladding- 1

X: 1000 - Y: 1500 - Z: 800 mm power: 3.2 kW Renishaw control laser control Lenght: 3259 mm Width: 2011 mm Thickness: 3510 mm

Brown & Sharp 600 x 400 mm

Brown & Sharp 500 x 500 mm

Brown & Sharp 1000 x 2000 mm

approx. 10 pieces spring floor trolley, Zarges, 195 L – used - : Price per unit: 495.-€ (net), ex location! Minimum order 5 pieces! Manufacturer: Zarges Type: 40645, Suspension Floor Trolley W 161 Year of manufacture: unknown With push bar Item no. Inner Length (approx. mm) Inner width (approx. mm) Inner height (approx. mm) Outer Length (approx. mm) Outer width (approx. mm) Outer height (approx. mm) Set for payload (kg) Volume (liters) Weight (kg) 40645 1010 420 460 1060 470 800 30 195 21,0 equipped with 4 swivel castors in corner arrangement. Original price: approx. 1.500.-€ Condition: good Available: immediately Location: Attenweiler

Table 6000 x 3000 x 400 mm Thickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton

Laservall 3,5 KW KUBO 100 EVO KE100E0109 Bouwjaar: 2009 Mitsubishi Control Microscoop voor het repareren/lassen van kleine onderdelen

used oven system / deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 shelves, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood ovens Crosta 3.18.20, each 3 shelves (with pellets), with 1 loading and unloading Wachtel Comfort loader (with Wachtel WinServer), built in 2016, in bakery condition, for self-dismantling, ran perfectly until the end

Raised floor, slab supports, pedestal supports, hollow floor, cavity floor, system floor, cable floor -Raised floor: Hollow floor basic structure without floor panels -Metal support: 246 pieces, height 95 to 170 mm -Crossbars: 195 pieces, width 30 mm x height 32 mm -Crossbar length: 135 x 935 mm, 30 x 885/435 mm each -Price/Fee: complete -Transport dimensions: 1230/810/H700 mm -Weight: 685 kg

Several used and powerful Gansow professional scrubber driers for trade and industry in stock! These cleaning machines are designed for professional floor cleaning and are in high demand. They are ideal for small and medium-sized areas, e.g. production areas, sales areas, warehouses. Gansow cleaning machines are very manoeuvrable and can be easily guided around obstacles. In order not to waste any cleaning agent, the water is distributed in the middle of the brush. The suction cup ensures the best drying results Delivery is without batteries, incl. charger. The cleaning machines show signs of use, have been tested for function and cleaned. Technical data Manufacturer: Gansow GmbH Co.KG Type: various models, e.g. 54 B 53 Voltage: 24 V Power consumption: 1,646 W Degree of protection: IP 41 Weight: approx. 277 kg We would like to point out that with regard to the Prod ...

Offer 25343 Technical data: - Max. load capacity per shelf 2000 Kg - 6 pull-out shelves - 1 piece top storage compartment - Compartment size approx. W 2600 x D 1350 mm - max. extension of the shelves approx. 100 % - Distance between shelves 240 mm - Space requirement approx. W 2950 x H 2250 x D 2480 mm - Space required in depth extended: 2980 mm - Weight approx. 1800 kg

In this package, youll find used Doka ceiling props in excellent condition!  The ceiling props are super lightweight and feature a hole numbering system for quick and easy height adjustment . With a load capacity of 20 kN , they’re strong enough to perform even under high load. 💪 🔧 Easy handling †The thread can be opened and screwed with ease. 🔁 🔧 Quick adjustment †The props can be extended in a flash. 🚀 🔧 Great condition †The top and bottom plates are in perfect shape. ✔ 💡 Delivery only in stackable pallets (1.55 x 0.85 m) †pallets are not included in the price per piece. 📦 Price: from € 29,90 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition.  ...

This package contains used Doka ceiling props in excellent condition! 💥 It includes both the Top and Eco versions , so you can choose the one that fits your needs. The ceiling props are known for their lightweight design and feature a hole numbering system for quick and easy height adjustment . With a load capacity of 30 kN , they provide reliable performance even under heavy loads. 💪 🔧 Fast & easy †The thread opens and screws in effortlessly. 🔁 🔧 Convenient adjustment †The props can be easily extended . 🔧 🔧 Well-maintained †Top and bottom plates are in excellent condition. ✔ 💡 Delivered only in stackable pallets (1.55 x 0.85 m) †pallets are not included in the unit price. 📦 Price: from € 34,90 / PCS (excl. VAT).Price valid: per full multi-trip container Partial quantity: possible Sub ...

Secure available Doka Dokaflex Table Head 30 systems for fast slab cycles and cost-efficient concrete construction projects 🚀 These proven Doka formwork components deliver reduced setup times, efficient formwork cycles, and maximum flexibility on the jobsite — ideal for companies looking for professional slab formwork without long lead times.   Each Table Head 30 already includes 2 DF 20/30 clamping units . Additional DF clamping units in 1 Star quality are also available on short notice — perfect as a cost-effective addition for economical system expansions ⚡   🔹 Ready for immediate use & directly available from Ennsbach, Austria 🔹 2 DF 20/30 clamping units included per table head 🔹 Additional DF clamping units in 1 Star quality available 🔹 Compatible with Dokamatic tables 🔹 H20 beams &  ...

Secure available Doka Floor Prop shoring props for professional concrete and construction projects 🚀 These well-maintained used shoring props in 3 ⭐ condition deliver high load capacity, immediate jobsite readiness, and efficient site operations — ideal for contractors looking for reliable slab formwork and professional construction material without long lead times 🔥   The proven Doka post shores are perfect for fast concrete cycles, efficient jobsite workflows, and cost-effective construction projects focused on productivity and performance ⚡   🔹 Premium used shoring props in very well-maintained condition 🔹 Ready for immediate jobsite use & available from stock 🔹 Proven Doka formwork quality for professional applications 🔹 Short-term availability from Florida, USA 🔹 Packaging costs ...

Doka Floor Props Eurex 30 Top 350 †Reliable Support for Your Construction Site! 🚧 Our used floor props combine strong performance, easy handling, and trusted Doka quality. A great solution for anyone looking for dependable formwork equipment at an attractive price. 👌   🔧 Product Highlights: ✔ High load capacity up to 30 kN. ✔ Adjustable extension length up to 3.50 m [511-116]. ✔ Fast and accurate adjustment thanks to clearly visible hole numbering. ✔ Used, inspected, and ready for immediate use. ✔ Space-saving storage on stacking pallets with 40 props per unit. 📦   📌 Available from stock in Florida, USA With Form-on, you get reliable products for everyday construction needs †fast, straightforward, and fairly priced. 🤝   📩 Contact us today and get your customize ...

This PERI SKYDECK accessory package includes the system-relevant components required for operating the SKYDECK slab formwork system. Whether Drophead SFK , End Support SSL , Combikopf SCK , Prop Head SSK or cover strips †the accessories ensure safe load transfer , clean edge finishes and smooth workflows during forming and striking . Combined with panels and beams, they form a fully functional SKYDECK system ready for flexible use on site. The package is ideal for supplementing existing stock , project-specific configurations or as a required basis when assembling SKYDECK element packages.   💡 Important note: This accessory package is a prerequisite for the supply of SKYDECK panels from our offers and should be considered during planning.   👉 Perfectly matched to our PERI SKYDECK packages in 3-star, 1-star and 0-star quality. Price: fro ...

Still working with outdated formwork systems? Time to change that. The used Dokadek 30 panel formwork brings structure to your site and focuses on what matters: quick setup , clear workflows , and safe handling .   Looking for a reliable formwork system for straightforward slab projects ? This is your chance: Buy Dokadek used †functional, robust, and ready to ship. Less lifting 🧱 , less searching 🔍 , less risk ⚠ †more focus on what really counts: moving forward. 🚀   ✅ Why Dokadek 30 (used) is worth it: ✔ Fast setup without beams ✔ Simple, intuitive system layout ✔ Minimal material variety †maximum efficiency ✔ Assembly directly from ground level ✔ Ideal if you’re looking to buy used slab formwork   ⏳ Still thinking? Others have already placed their o ...

Are you searching for cheap Dokamatic swivel heads 40 in a good used condition? In this package you can find Doka Dokamatic swivel heads for a swivel connection between superstructure and floor prop of the tableform. The material is single inspected, professionally cleaned and ready to use.  You can find little traces of use on the heads.  The heads get delivered in boxes (24 heads / box). Boxes are not included in the price / pc. Price: from € 29,00 / PCS (excl. VAT).Price valid: per piece Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 1714 x Dokamatic swivel head 40 (Art-No. 586214000), 3 stars, € 29 / pc

Powerful. Proven. Ready to work. 💪 This Doka Superdek complete package is designed for 10,000 sqft of slab formwork with a 10 slab thickness , making it the ideal solution for projects with high loads, large spans, and tight construction cycles across the US market 🇺🇸 Superdek stands out with its large grid spacing , reduced number of props , and the drop head system that enables fast and efficient stripping. Installation is carried out mainly from below , increasing productivity while significantly improving jobsite safety. 🚀 Key benefits Designed for 10,000 sqft with a 10 slab Large system grid → fewer props, more freedom on the jobsite Drop head system for fast cycle times and early striking High load capacity for commercial and residential construction Doka Superdek †a proven slab formwork solution o ...

Looking for used slab formwork to speed up your construction project? This Faresin Alufort formwork package offers approx. 292 m² of aluminium slab formwork , ideal for efficient concrete floor and ceiling formwork in residential and commercial construction. The Alufort system is designed for lightweight handling , high reusability, and fast installation on site. Perfect if you want to buy used aluminium formwork while still relying on proven quality. 🏗️ 💡 Key benefits: ✔ Robust aluminium slab formwork system †strong and lightweight ✔ Large 292 m² formwork package for slab and ceiling areas ✔ Used formwork with excellent value for money ✔ Including transport and storage pallets for easy logistics 📦 ⚠ Accessories are not included in this package, but available on request . Large slab formwor ...

🛒 Dokamatic table grille in individual parts | ½ truckload or 40 container Our offer on the Form-on Marketplace is as individual as your requirements! ✨ And this is what you get: individual parts for 24 pcs. Dokamatic table grille 2.00x5.00m maximum optimization of transport costs thanks to space-saving loading the required returnable container is already included in the total price 🚚 Now theres just one question: Whats the quickest way to get your table grills? If required, we will be happy to ask for you about the transportation costs incurred or you can simply and easily collect your material yourself. Price: from € 9850,00 / Gesamtpaket (excl. VAT).Price valid: per total quantity Partial quantity: not possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Use ...

🛒 Dokamatic table grille in individual parts | ½ truckload or 40 container Our offer on the Form-on Marketplace is as individual as your requirements! ✨ And this is what you get: individual parts for 24 pcs. Dokamatic table grille 2.00x4.00m maximum optimization of transport costs thanks to space-saving loading the required returnable container is already included in the total price 🚚 Now theres just one question: Whats the quickest way to get your table grills? If required, we will be happy to ask for you about the transportation costs incurred or you can simply and easily collect your material yourself. Price: from € 8920,00 / Gesamtpaket (excl. VAT).Price valid: per total quantity Partial quantity: not possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Use ...

More efficiency on site †with the Doka DekLift 4,50 m , you can position single Dokadek slab panels quickly, safely, and with minimal effort. Ideal for greater room heights and smooth slab formwork operations. 🚀 This mobile panel lifter supports you when lifting, positioning, and installing slab formwork elements †precise, stable, and built for tough jobsite conditions. Your Advantages: ✔ Perfectly matched to Dokadek slab formwork ✔ Lifting height up to 4.50 m †ideal for high ceilings ✔ Galvanized, heavy-duty construction ✔ CE compliant ✔ Condition: New and inspected †ready for immediate use Whether residential, commercial, or industrial construction †this Doka panel lifter saves time, reduces physical strain, and ensures an efficient formwork workflow. ⚡ Secure it now †high-quality  ...

This package includes all currently available Dokadek panels in 1-star condition †the smart solution if you want to buy used slab formwork that still gets the job done. Functional, ready to go, and optimized for practical use. 💡 Dokadek 30 is a frame-based slab formwork system without beams †lightweight, quick to assemble and ideal for covering large areas. Aluminium frames provide stability, while the plastic panel surfaces are smooth and easy to clean. 💪 Looking for Dokadek used panels with reliable functionality at a great price? You’ve just found them. 🎯 ✅ What’s in it for you: ✔ Frame-based Dokadek panels in solid working condition ✔ Lightweight components †aluminium and plastic combo ✔ Ground-level assembly †fast and efficient ✔ Perfect for simple, budget-focused site app ...

🚧 High demand for 5.50 m props †secure availability now! The Doka Eurex 20 550 prop is one of the most requested formwork props for slab formwork and high floor heights . Especially 5.50 m props are currently in strong demand across the market, making available quantities limited. Companies planning upcoming formwork, concrete and construction projects should secure their required Doka Eurex 20 550 props early. ⚠   This package includes the classic original version of the Doka Eurex prop , meaning not the Eco and not the Top version . The first generation of the Doka Eurex 20 550 formwork prop is well known on construction sites for its robust design, reliable mechanics and exceptionally long service life . Thanks to its durable construction and proven performance, the Doka Eurex 20 550 prop remains a trusted solution for slab formwork, formwork systems ...

Used dosing bunker with moving floor and discharge roller Manufacturer: HARTNER Type: active vario-storage (AVS System 2100 - 40) Year of Make: 2004 Technical data: Overall width: approx. 2,670 mm Length: approx. 12,000 mm Width: approx. 2,670 mm Height: approx. 2,500 mm

Meet-/montagetabellen: - 5 tafels van 4040 x 2000 mm - tussen elke tafel bevindt zich een tussentafel van 1 meter breed Thickness: 380 mm Length: 4040 mm Large: 2000 mm

EXA Floor Scale 1500mm x 1500mm Auction-ID: A1-48805-128

The scope of delivery includes: 01x Grating floor, used Material colour: hot-dip galvanised Total depth: approx. 382 mm (bearing rod direction) Overall width: approx. 1,270 mm (crossbar direction) Bearing bar diameter: 20|1.80 mm Support: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight / piece: approx. 5.33 kg Note: - The shelf grating can cause damage, Have scratches, dents, welds. General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x Grating floor, used Material colour: hot-dip galvanised Total depth: approx. 482 mm (bearing bar direction) Overall width: approx. 1,270 mm (crossbar direction) Bearing bar diameter: 20|1.80 mm Support: approx. 20 mm Frame height: approx. 20 mm Mesh size: 68 x 35 mm Weight / piece: approx. 6.72 kg Note: - The shelf grating can cause damage, Have scratches, dents, welds. General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data Description: Floor Grinding and Polishing Machine Manufacturer: ASL Model No.: T8 Voltage: 220–240 V Configuration Mobile floor grinding machine with round grinding head and protective cover. Equipped with guide bar, control panel on the handle, display, connection cables and hose lines. Remarks Scope of offer according to illustrations. Auction-ID: A7-49302-39

size: L 500 x W 50cm, suitable for temporary floor constructions at events, tents and parties Auction-ID: A1-49000-168

Technical data Manufacturer: Husqvarna AB Type: FS 400 LV Product Ref: 967796501 Serial Number: 2021 2130056 Power: 8.7 kW Weight: 102 kg Max. saw blade diameter: 500 mm Saw blade speed: 3,000 rpm Drive: Combustion engine Configuration Hand-held floor cutter or concrete saw with chassis, cutting depth adjustment via handwheel, front guide indicator, saw blade protection and emergency stop. Auction-ID: A7-49302-30

Technical data Manufacturer: Husqvarna AB Type: FS 400 LV Product Ref: 967796501 Serial Number: 2021 2130056 Power: 8.7 kW Weight: 102 kg Max. saw blade diameter: 500 mm Saw blade speed: 3,000 rpm Drive: Combustion engine Configuration Hand-held floor cutter or concrete saw with chassis, cutting depth adjustment via handwheel, front guide indicator, saw blade protection and emergency stop. Auction-ID: A7-49302-34

According to photos, weight estimated Auction-ID: A1-48554-126

floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46152-1069

Features: Steering rear axle 6 stanchions Black coffin offers the possibility for night lighting. Loading height: 1300 mm. Inhibited Auction-ID: A1-47388-8

disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-49373-207

unused; in cardboard box; Battery voltage: 24 V; Power: 550 W; Continuous working time: 4-5 hours ; Clean water tank: 45 L Capacity; waste water tank: 50 L; Cleaning efficiency: 2500 m²/h ; Suction diameter: 830 mm ; Brush pressure: 30 kg ; Suction power: 12 KPa ; IP degree: IPX4; Weight: 145 kg; self-driven; digital display; v.v. password; 8553 Auction-ID: A1-49373-76

Equipped with: year of manufacture 2018, equipped with Honda GX390 1-cylinder 4-stroke petrol engine of 8.7 kW (11.8 hp), manual start, saw blade Ø 300–450 mm with 25.4 mm bore, maximum cutting depth approx. 175 mm, manual stepless depth adjustment, 23 litre water tank, transport dimensions approx. 820 × 520 × 870 mm and own weight 104 kg. Auction-ID: A1-47388-317

Equipped with: full stock packed in 20 pieces (5 boxes full), tape for cable sealing after insertion (approximately 600 pieces) also from Stokvis Tape (Stokseal tape for airtight construction 1m/piece), with a new value of 6300 euros Auction-ID: A1-47388-247

Contents consisting of concrete plywood plate, stainless steel poles, power tools, racks, gas cylinder trolleys, etc. Auction-ID: A1-49846-155

unused; in cardboard box; Battery voltage: 24 V; Power: 550 W; Continuous working time: 4-5 hours ; Clean water tank: 45 L Capacity; waste water tank: 50 L; Cleaning efficiency: 2500 m²/h ; Suction diameter: 830 mm ; Brush pressure: 30 kg ; Suction power: 12 KPa ; IP degree: IPX4; Weight: 145 kg; self-driven; digital display; v.v. password; 8553 Auction-ID: A1-49373-75

Unused in packaging; suitable blade size 350-500mm; 13HP; maximum depth 17cm; Rotation lever for height adjustment; 40L water tank; without saw blade; unused; 6529 Auction-ID: A1-49373-110