milling boring floor used for sale

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg

bore capacity in steel (diameter): 35 mm throat: 230 mm bore stroke: 125 mm spindle taper: ISO 40 spindle turning speed range: 115 - 1750 U/min : 560 mm : 175 mm table surface area: 1000 x 240 mm max. distance between table and spindle-nose: 375 mm connected load frequency: 400 V total power requirement: 0,85/1,5 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

Tool milling machine from a training workshop in very good condition Manufacturer Klopp Korradi Year of construction 1991 Digital SK40 automatic feed in three axes Drilling pinole 50 mm Head rotatable Spindle speeds up to 45-1950 rpm x-310 mm y-180 mm z-310 mm Table 600 x 250 mm Feed infinitely variable 10 - 470 mm/min. Machine dimensions approx. 1.0 x 1.1 x 1.6 m Power connection 400Volt 10 Ampere 3-axe digital device AXEsta Counter-holding for horizontal milling Coolant device Chip tub Special price

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 41.3 mm -Dimensions: 155/90/H150 mm -Weight: 6.8 kg

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO

Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).

I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 45 mm -Dimensions: 155/90/H150 mm -Weight: 6.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 110 by 135 mm -Drawing: in the photos -Dimensions: 210/90/H220 mm -Weight: 8.6 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

SPECIFICATIONS: Engine power HP: 3 Vertical leadership support Replacement tools available

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

small handy machine from Swabia

Tool holder, milling holder, milling tool -Number: 3x SK40 holders -various: versions -Sale: only complete -Weight: 6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Recording inside: Ø 28 mm -Weight: 2.9 kg/piece

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 278 by 218 mm 38 mm high -Drawing: in the photos -Dimensions: 450/95/H295 mm -Weight: 13 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 145 by 185 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 290/90/H210 mm -Weight: 14 kg

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Swallowtail: 102 by 126 mm by 20 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 180/70/H140 mm -Weight: 6.9 kg

TABLE 500 X 800 ISO 40 CNC1600

x-travel: 2500 mm y-travel: 750 mm z-travel: 1000 mm table surface area: 2550 x 800 mm spindle taper: SK 50 control: HEIDENHAIN, TNC 150 B The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 315 by 255 mm 40 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 560/200/H285 mm -Weight: 20 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm, 30 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 390/130/H260 mm -Weight: 30 kg

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece -Dimensions: 450/110/H300 mm -Weight: 12 kg

x-travel: 450 mm y-travel: 300 mm z-travel: 240 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Matheys Type: 2B Table length: 850 mm Table width: 235 mm X: 450 mm Y: 300 mm Z: 240 mm Maximum speed: 2.500 RPM Variable adjustable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 75 to 90 mm, 15 mm high -Bore: Ø 55 mm -Drawing with the photos -Dimensions: 130/70/H150 mm -Weight: 10 kg

travel: 1600 mm length: 1600 mm width: 1200 mm spindle head according to: spindle turning speed range: 100-12000 U/min switching steps: feeding velocity x-Axis min./max.: mm y-Axis min./max.: mm Control: Fanuc Brand: OKK Type: VP1200 CNC brand: Fanuc CNC model: 160is-MB Year of make: 2004 Table length: 1.600 mm Table width: 1.300 mm X: 1.600 mm Y: 1.300 mm Z: 550 mm Throat depth: 560 mm Tool changer: 40 Minimum speed: 100 RPM Maximum speed: 12.000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2.000 kg For additional information, please refer to the pdf file Machine dimensions: 5.800 x 3.200 x 2.800 mm Machine weight: 16.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

bore capacity in steel (diameter): 20 mm throat: 195 mm bore stroke: 80 mm boring spindle: MK 2 table surface area: 320 x 300 mm total power requirement: 0,75 kW weight of the machine ca.: 0,072 t dimensions of the machine ca.: 0,7 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.