We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,027 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...
used
Ball mill, Drum mill, Laboratory ball mill used HEINZ WELTE KG Type: BGAK-6E Drum: Ø 790 x 800 mm Engine 0.75 kW RPM 400 V Dimensions: approx. 1600 x 800 x 1200 mm The mill is suitable for grinding free-flowing products. All items will be checked for function before delivery, if technically possible!
used
Used ball mill made by turkish company Remas. Capacity 34,000 liters. Mill inside the rubber, silicon spheres, 90kW engine. 10.68 mill Oroty rev. / Min. Dimensions: 3120mm diameter. length of 5380mm. Dost. 7 pcs.
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved ...
new
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...
new
Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. Cutting mill VESPA 18/32/5.5 kW VGA for plastics, cable 5.5 KW, 60-80 kg/h. Model: VESPA18/32/5.5 kW VGA Throughput Kg/h: 60-80 Rotor diameter мм: 180 Rotor knife quantity/dimensions piece x mm: 6×160 Stator Knife Quantity/Dimensions Piece x mm: 4×160 Motor kW: 5.5 Weight Kg: 400 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 860 B-620 C-1480 D 1250 E 325 F 220
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant New mill never used, in former design. ACM 40 EC Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air fl ...
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
used
Stock U2261-1 Second hand Jehmlich (Germany) model Record D carbon steel beat mill (universal mill). Unit has cast iron body and carbon steel beater-discs. Mill has stator and rotor with diameter 570 mm. Rotor is driven via belts by el. motor 22 kW, 2930 rpm, 380 V, 50 hz. Includes product feeder driven by separate el. motor. Technical documentation is not included.
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
used
Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.
used
Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.
Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used universal fine impact mill Hosokawa Alpine 250 UPZ. This turbo mill is able to pre-cut and produce medium to fine products. Can be fitted with different grinding tools in order to adapt to each specific grinding needs. This mill is suitable to process many different products for all kind of industries, like minerals, chemicals, food, etc. Material of construction - product con ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Slightly used, in like new condition, classifier mill Hosokawa ACM 5 Pharma. This micronizer allows you to obtain a perfectly controlled top cut. It can be used to fine grind different products. The comminution occurs in the lower part of the grinding chamber where the feed particles are crushed. Thanks to the adjustable classifier wheel on the upper part of the grinding chamber, the ...
used
Ball mill Drum mill Wet grinding body Mill clinked TMNP17/2 with engine and adjustment gearbox used Manufacturer: VEB Type: TMNP 17/2 Year: 1984 Drum length approx. 2010 mm, walled out inside with wear-resistant clinkers Drum Ø ca. 1700 mm Wall thickness approx. 17 mm Drive gear Ø approx. 870 mm x 100 mm Opening approx. Ø 220 mm / 450x450 mm with coaster block gearbox and approx. 15 kW electric motor The substructure can be offered as a steel structure by us Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-63A DIN 69893 ...
used
Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...
used
Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industri ...
used
Used Hosokawa Alpine Rotoplex RO 36/60 cutting mill. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 36/60. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycli ...
used
For sale is the following article: Cutting mill Profile mill Möser 30 KW, Throughput: up to 250kg/h (depending on plastic and parts) Manufacturer: Möser Accessories: silo/cyclone, 1 suction blower, 3-4 perforated screens (8-10mm grain size), 2 sets of knives, control cabinet for switching on and off. Complete pipe system More information about the dimensions and technical information on request. optical condition according to photos - used - fully functional Mill is still built and connected to electricity. You are welcome to look at them and try them out. Pick-up by arrangement and dismantling possible promptly.
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 800 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 ...
used
USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.
used
Rolling Mill for REBAR and WIRE, cap. 350.000 - 400.000 TPY YOM: 1981 The Mill consists of: • (4) Roughing Mill Stands (1-4) • (4) Intermediate Stands (5-8) • Shear • (4) Intermediate Stands (9-12) • (4) Finishing Stands (13-16) • Split Rebar (A)/Bar (B)/ Wire (C) • Shear • (6) Finishing Stands Rebar (17-22) • Shear • Coolant Bed • (8) Finishing Stands Wire (17-24) Upgrades have been done.
used
Used slow speed ball mill for the production of chocolate creams made by Techmasz model WMK350. New 2019. The offer consists of: - 2x WMK350 ball mill - 2x chocolate pump with water jacket + piping - 1x DUO fat melting tank The slow-running ball mill was manufactured mainly for the food industry. Its technical parameters allow it to meet the high requirements of this industry. Technical data: - Mixer drive: Nord SK2282 VF - 112 MH/4 geared motor controlled by NORD inverter type SK500E-401-340 - Coupling type: Maintenance-free flexible torsion coupling size 75 with 92 Sh A coupling. - Agitator speed control: In the range 20-80 rpm - Noise level: Less than 85 dB(A) - Ball diameter/type: 13 mm/91 kg (approx. 10000 pcs.) - Usable volume of mixing chamber: Min. 11.50 l., Max. 342.00 l. Full documentation.
used
Stock# UG6373 Used horizontal cutting mill by Inan Plastic (TU) model 65 100. Machine has rotor with diameter 650 mm x 1000 mm width. 15 knives mounted on rotor and 4 static knives mounted in cutting chamber. Rotor works with speed up to 470 rpm and is belt driven by 75 kW el motor. Mill is mounted in soundproof housing. Milling chamber is hydraulically opened by device with power 1.4 kW. Bottom discharge through screw conveyer driven by 2.2 kW. Mill is equipped with two screens - one with perforations with diameter 10 mm, 2nd - 12 mm. Bearings of rotor shaft are equipped with water cooling channels. Includes also control panel and technical documentation. Working output up to 1200-1500 kg/h, depending on product. Last time used in plastic recycling industry. Working dimensions: W 221 cm x L 206 cm x H 391 cm x weight 5500 kg. Machine in working condition.
used
377mm x 12mm HF Pipe Mill Round Size: 165mm – 327mm, Square: 100mm – 300mm, Wall Thickness: 4mm – 12.7mm, Pipe Length: 6m – 12m, Coil ID: 610mm – 760mm, Coil OD: 1100mm – 2000mm, Coil Weight: 25ton, Strip Width: 400mm – 1200mm, Speed: 10 – 35 mpm. Entry Coil Car, Mandrel Uncoiler, Pinch Rolls, Coil Straightener, Horizontal Accumulator, Guiding. Rolls, Forming Mill with DC Drive, Welding Section, 800Kw High Frequency Welder, Water Cooling Section, Sizing Mill, Driven Turk-Heads, Flying Cut-Off, Run-Out Table. Electrics, Hydraulics, Controls
used
Cutting mill - Martiplast Year of construction: Description: Slow-raining granulator with gearbox Power: 2.2 kW 2 stator knives, 2 x joints, rotor with the milling cutters Hopper inlet: 230x300 mm Grinding chamber opening: 230x230 mm Cutting mill without sieve, regulation of the grinding thickness by means of the hole adjustment between milling machine and stator knife Granulate mill is used to grind the very hard details, waste - just like the crusher Hole for material case is prepared for connection with suction conveyor Price: On request
used
Hello, I will sell a hammer mill MMD5 - 37 kW. A very popular simple design that withstands motors up to 55 kW. The mill together with the screw feeder, which has a gear that regulates the speed, so you won't have to buy an inverter (unfortunately, without a motor). The feeder also has magnets to capture metals. Sometimes it is worth having it in stock, all complete, because downtime costs more than such a mill. Feel free to contact me.
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: Hofmann -Type: KRE80-321 -Best. No.: 229.810.00 -Dimensions: -Weight: 7.8 kg
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 35 mm -Recording: MK 4 -Weight: 1 kg
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm -Mounting hole: Ø 22 mm -Weight: 0.75 kg
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 40 mm -Working height: 50 mm -Adjustment: SK50 -Weight: 4 kg
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 67 mm -Milling height: 150 mm -Adjustment: SK50 -Manufacturer: WIDIA -4x milling cutter type: KRE80-301-10 -6x milling cutter type: KRE80-300-11 -2x milling cutter type: KRE80-301-20 -3x milling cutter type: KRE80-301-30 -Dimensions: -Weight: 15 kg
used
End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, cutter head -Handover: in the current condition as viewed -Milling cutter: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg
used
Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg
new
INSIDE DIAMETER : 1.800 mm, BODY LENGTH : 3.000 mm BALL MILL, IN STOCK, NEW AND 2 YEARS GUARANTEE, STEEL OR RUBBER LINING, MILL HEADS: GGG60 MILL GEAR : GGG80 CENTRAL GREASE LUBRICATION SYSTEM ALL BODY SEATED ON A STEEL CASE, 132 KW ELECTRICAL MOTOR, COUPLING TRANSMISSION, NOTE: FOR PROCESS DESIGN AND SPECIAL DIMENSIONS, PLEASE ASK
used
The grinder is using mill stones produced according to BOROs patented technology. The mill stones are made of different types of granulate materials which enables them to be constantly sharp regardless the rubbing. This kind of structure distinguishes the stones with great hardness and toughness, also long lasting. Besides the structure, also the shape and the profile are specific. The grains role between the stones, but because of the pressure, beside the requested fine final granulation to small pieces, in contact with water the grain gets disintegrated in even smaller pieces. This quality of the mill stones makes the grinded coffee soft and fully aromatized. All these characteristics of the grinding stones make the grinded coffee : Extra fine Soft Fully aromatized Low temperature during grinding Type 1100 H Capacity / h 250 – 350 kg Size l – w -h 2.5 x 1.9 ...
used
Used SRAML crusher MILL JM6000 in excellent condition. Crushes fruits and vegetables perfectly. THE PRICE SHOWN IS WITHOUT VAT. The mill is designed for milling leafy fruit with fibers, such as rhubarb, before further processing. The mill cuts the fibers in the fruit, with a sharp rotor. Mounted on pivoting wheels. Rotating speed: 2800 rpm Lenght: 1120 mm Width: 750 mm Height: 1030 mm Weight: 195 kg Electr. power source: 5,5 kW Supply voltage: 3/N/PE ~ 400/230 50Hz Mech. protection: IP55 Capacity: 6.000 kg/h
used
Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on ...
used
Used roller mill made by SPOMAX Polska, typ RUD-11/8. New 2002. Depending on the crushed raw material yield is 100-2000 kg (mean 1000 kg). The mill has two pairs of milling rollers. 7.5 kW motor. Overall dimensions: height 2030 mm, 755x890 mm base. Weight 680 kg.
used
Drum mill for batch, iron-free grinding of minerals for the following industries: ceramics, chemistry, enamel, paints, recycling, etc. Including drive (11 kW via intermediate gearboxes and V-belts) and standing feet, mill inside lined with aluminium oxide tiles, drum dimensions: 1.5 m x 1.6 m . Maximum grinding material filling: 1,000 kg; incl. grinding balls.
Qty. 1 Second-hand plate milling line - never used Mfc.: SELEMA Type: PMM Built: 2014 Max. scalping area: 1800 x 4000 mm Height: 6 – 200 mm Entry plates planatory tolerance: max. 0.4 on width max. 0.2 on length Entry plates thickness tolerance: +/-0.2 mm Thickness accuracy: +/- 0.1 mm Min./max. milling depth (single milling: 0.1 / 1.5 mm Positioning accuracy: +/- 0.0125 mm Moveable table stroke: 10 mm Movable table speed: 2.5 m/min. Mill dia.: 2.1 mm Mill speed: 490 RPM Milling surface roughness: < 0.25 Ra with cut-off = 1.5 mm & new milling tools
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Description This is a long gap mill type LGM 4, which can be used for grinding and drying. Origin and Condition The long gap mill was used for several years in our pilot plant as an experimental machine. During this time various products were ground and dried. Technical data Drive power: 18,5 - 55 kW Air volume: 2500 Nm³/h Evaporation capacity: 120 kg/h
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...
new
Cutting mill for high demands in a compact class. The mill is ideal for grinding small quantities. In production, there are always surpluses, missing parts. These recyclable materials can flow back into production, so that manufacturing costs can be optimized and reduced. 40/80/30 VGA granulator for plastics 30 KW, 350-600 kg/h. Model: VESPA 40/80/30 kWt VGA Throughput Kg/h: 350-600 Rotor diameter мм: 400 Rotor knife quantity/dimensions piece x mm: 6×400 Stator knife quantity/dimensions piece x mm: 4×400 Motor kW: 30 Weight Kg: 1960 options: With material conveying blower and Big Bag filling station Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. Dimensions (mm) A 1520 B-1430 C-2420 D 1910 E 820 F 500
Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace
Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars
Qty. 1 Second-hand double stand cold rolling mill stand Mfc.: SMS/Germany Type: 4-Hi Double Stand Cold Rolling Mill Built: 2009 Stopped: 2017 Capacity: 800,000 Ton/Year Annual running: 6480 h Strip width: 800 – 1650 mm Thickness entry: 1.8~5.0 mm Exit: 0.3 – 2.5 mm Coil OD: 1000~2200 mm Coil ID: 610 mm Coil Weight: Max. 30 T Line Speed: max. 1350 m/min Threading Speed: 30 m/min