mill used for sale

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: mech. Counters; Swivel angle indicator: mech. Counters; Milling stop indicator: mech. Counters; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Spindle swivel: Yes 0 to 45Â; Height adjustment: electric/position control; Swivel adjustment: electric / position control; Milling fence adjustment: electric / position control; Milling jaw adjustment: manual / handwheel; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Aigner integral stop: yes; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm;

Spindle swivel: Yes -5 to 45Â; Height adjustment: manual/handwheel; Spindle stroke: 142mm; Swivel adjustment: manual / handwheel; Stop adjustment: manual; Altitude display: Scala; Swivel angle indicator: Scala; Milling stop indicator: Scala; Spindle diameter: 30 mm; Spindle length: 140mm; Max. tool diameter: 250mm; Speeds: 3500 / 6000 / 8000 / 10000rpm; Motor power: 5.3 kW; Engine brake: Yes, automatic; Table size: 1000mm x 520mm; Carriage length : 1200mm; Suction connection: 2 x 120 mm; Machine length: approx. 1200 mm; Machine width: approx. 900 mm; Weight:

Spindle swivel: Yes 0 to 45Â; Height adjustment: handwheel / electric; Swivel adjustment: handwheel / electric; Milling jaw adjustment: manual; Altitude display: digital display; Swivel angle display: digital display; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Working width: 260 mm; Working height: 130 mm ; Working waves: 5; Spindle arrangement: down, right, left, up, down; Slot bed: yes; Motor power shaft bottom: 5.5kW; Motor power shaft right: 5.5 kW; Motor power shaft left: 7.5 kW; Motor power shaft top: 7.5 kW; Motor power shaft bottom: 7.5 kW; Adjustment shaft bottom: crank; Adjustment shaft right: crank; Adjustment shaft left: crank; Adjustment shaft top: crank; Planer heads: Centrolock; Feed speed: infinitely variable; Feed roller pressure: pneumatic; Current consumption: 50A; Current consumption: 71.7A;

Carriage length: 2500 mm; Cutting width at the width stop: 1200 mm; Cutting width at cut-to-length fence: 2500 mm; Cutting depth: 100 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 300mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Carriage length: 2500 mm; Cutting width at the width stop: 1000 mm; Cutting width at cut-to-length fence: 3000 mm; Cut depth: 125 mm; Vorritzer: yes; Height and swivel adjustment saw blade: handwheel; Width stop adjustment: manual; Display Saw Blade Angle: Scala; Display cutting height: Scala; Display width stop: Scala; Display cutting ruler: Scala; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power / saw: 4.4 kW; Engine brake: yes / automatic; Milling mandrel swivel: yes 0 - 45Â; Height and swivel adjustment of the milling mandrel: handwheel; Altitude and

Key data: 1875 mm, 1550 mm, 1345 mm

CNC Vertical Multitasking Machine CNC Control Mazatrol Matrix 2 Turning diameter 2000 mm Turning speed 10-300 R/min Milling head speed 25-5000 R/Min Movement X-Y-X-axis 1875-1550-1345 mm B-axis travel -30/120° C-axis indexing 360/0,0001° Tool taper Capto C8 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

A CNC double-station milling machine Schwäbische Werkzeugmaschinen with 3 axes is available. Stations: 2, travel X/Y/Z: 700mm/500mm/500mm, positioning accuracy: +/-0.02mm, position scatter: +/-0.01mm, rapid traverse: 25m/min, feed force: 8500N. Machine dimensions X/Y/Z: approx. 6700mm/3200mm/3200mm, weight: approx. 11500kg, control: Siemens Sinumerik 840. The left sliding cover is defective, however another one from stock can be adapted for it. Documentation available. An on-site inspection is possible.

CONTROLS    HEIDENHAIN TNC 128 WORKING RANGE -CUBIC-   X-axis travel: 610 mm   Y-axis travel: 400 mm   Z-axis travel: 450 mm TABLE   table surface (left-right): 800 mm   table surface (front-back): 425 mm   workpiece load (max): 300 kg SPINDLE / HEAD   spindle revolutions (max): 4500 /min   tool fixture: ISO SK 40 AXIS DRIVES   traverse velocity X (max): 2000 mm/min   traverse velocity Y (max): 2000 mm/min   traverse velocity Z (max): 2000 mm/min   rapid traverse X: 5000 mm/min   rapid traverse Y: 5000 mm/min   rapid traverse Z: 4000 mm/min DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1800 mm   total height: 2000 mm   total weight approx.: 2300 kg ATTACHMENTS   coolant unit: yes   closed cabin: yes   European CE standards: yes Condition:- as new (barely used)- approx. 1000 spindle hours-  ...

A CNC 3-axis milling machine Emco is available. Travel X/Y/Z: 900mm/500mm/500mm, table dimensions X/Y: 1000mm/520mm, max. table load: 800kg, speed: 10000rpm, spindle power: 11kW, tool holder: SK40, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2600mm/2450mm/2950mm, weight: approx. 4800kg, control: Siemens Sinumerik 828D. Documentation available. An on-site inspection is possible.

CONTROLS   conventional BASIC DESIGN   basic design: cross bed WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 1120 mm   Y-axis travel: 350 mm   Z-axis travel: 400 mm   distance spindle nose - table surface (max.): 420 mm TABLE   table surface (left-right): 1600 mm   table surface (front-back): 400 mm   workpiece load (max): 1500 kg SPINDLE / HEAD   spindle type: tilting head   - mode of operation: manual   - mode of operation: manual   spindle revolutions (max): 28 /min   number of gears: 1400   tool fixture: ISO SK 40 AXIS DRIVES   feed velocity (min): 16 mm/min   feed velocity (max): 800 mm/min ELECTRICAL SPECIFICATIONS   total power consumption: 14.5 kW DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 2350 mm   total height: 2150 mm   total w ...

Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferre ...

Carousel milling machine Comec FGS-1T Number of generators 1 Unit system: milling unit Pneumatic material central clamp Motor power 11kw Rotational speed adjustable by variator Net price

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...

Okuma Multus U 3000Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mmTurning length : 1000 mm____________Description:Main spindle:Technology:Motor spindleSpeed:4,200 rpmPower:22 kWTorque:427 Nmspindle bore:91 mmHollow clamping cylinder:86 mmC-axis:High precision packageChuck:SMW KNCS-N 275-86 K8Sub spindle:Technology:Motor spindleSpeed:5,000 rpmPower:22 kWTorque:420 Nmspindle bore:80 mmHollow clamping cylinder:77 mmC-axis:High precision packageChuck:SMW BHD-FC 210-52-3Tool carrier X/Y/Z/B:Technology:Milling spindleSpeed:12.000 rpmPower:22 kWTorque:120 NmTool holder:HSK 63Y-axis:250 mm (+/- 125 mm)B-axis:240°Tool magazin:Number of stations:80Equipment:Measuring systems:Direct in X/Y/Z axis (glass scales)Chip disposal:Chip conveyorCoolant supply:IKZ system, 70 barCoolant temperature control:Deltatherm E4Chip rinsing:working area, manual gunAccuracy package:C-ax ...

Key data: 500 mm, 400 mm, 400 mm

Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M With control Heidenhain TNC 310 Year of Make: 2001 Travel: X 500 Y 400 Z 400 Speed range: 20 – 4,500 rpm infinitely variable With the following accessories: Manual swivel – rotary table with digital display for C + B axis 700 mm x 500 mm clamping surface Electronic handwheel for X, Y, Z axis Splash guard cabin Machine Light 4 Height Adjustable Machine Shoes Coolant Setup Operating instructions

This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information.

Automatische roterende freeskop: 90° en 45° Automatische gereedschapswisselaar met 30 posities spanentransporteur koelunit + filter maximaal werkstukgewicht 6 ton Longitudinal travel X-axe: 1700 mm Cross travel Y-axe: 1200 mm Travel Z-axe: 1000 mm Dimensions clamping space- table: 2000 x 1000 mm Max height workpiece: 934 mm Power on spindle: 22 kW Admission in millinghead (ISO): BT50 Max speedrange: 35 > 3000 rpm Control: Heidenhain Power needed (KVA): 56 kVa Length : 5300 mm Depth: 4950 mm Height: 2800 mm Weight: 18 ton

Mazak Integrex i-100H SYear of manuf. : 2023 Control : Mazak Mazatrol SmoothAi Turning diam. : 600 mmTurning length : 850 mm____________Description:In General:Year of manufacture:2023Control system:Mazak Mazatrol SmoothAiMax. machining diameter:600 mmMax. machining length:850 mmMain spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Chuck:3-jaw chuckClamping cylinder:Hollow clamping cylinderSub spindle:Technology:Motor spindleSpeed:6,000 rpmPower:11 kWMax. torque:184 NmBar capacity:51 mmC-axis:0.0001°Tailstock function:YesTool carrier (X/Y/ZB):Technology:Travelling column with milling spindleX-axis:535 mmY-axis:210 mmZ-axis:900 mmB-axis:-30° / +210°Milling spindle speed:20,000 rpmPower:24 kWTool magazin:Technology:Shelf magazineNumber of stations:250Tool changer:Double gripperEquipment:Chip disposal:Chip conveyorCoolant s ...

HERMLE UWF 802 M universal milling machine with HS 401 route control -HS 401- Track control -Travel X / Y / Z 500x430x400mm -Rigid angle table -Speed range 18-3550 rpm -Feed continuously variable in all three axes 0-1600 mm/min -Rapid traverses 0-1.6 m/min in all three axes -Vertical - Horizontal milling device -Tool holder ISO 40 -Hydraulic tool clamping -Central lubrication -Chip tray -Drive power 6 KW -Work light -Spindle protection -Documentation Dimensions LxWxH 1.9x1.8x1.9 meters / Weight: 1800Kg

Tool milling machine Deckel FP 2 / 3-axis digital display Heidenhain ND 780 -Travel paths X/Y/Z: 450 x 200 x 400 mm -Table clamping surface 700 x 350/tilt-swivel rotary table -Speed range: 40–2000 rpm -Feeds & rapid traverses in all three axes -Tool holder: ISO 40 -Vertical/horizontal milling device with vertical sliding head -Coolant device -3-axis digital display: Heidenhain ND 780 -Documentation -Chip tray -Various tool holders -Collets Dimensions: LxW xH 1.5x1.7x1.8 meters / Weight 1600Kg

Technical data: X-axis 2,000 mm Y-axis 2,500 mm Z-axis 1,250 mm W-axis 800 mm Spindle power 37 kW Spindle speed 1.6 – 1,500 rpm. Tool holder SK 50 Control CNC HEIDENHAIN TNC415 Table dimensions 1,800 x 1,600 mm max. table load 8 to B-axis 360° Weight approx. 30,000 kg Motor fan new Simodrive modules new 2024 November SK 50 Cone Reground 2024 New cover X axis in 2024 Y scale 2023 overtaken by Heidenhain

Stock# U2472 Used vertical stainless steel contact parts by Probst & Class (PUC) type K100/0. Mill is directly driven by el motor 5.5 kW, 2905 rpm, 380 V, 50 Hz. Mill has stainless steel conical feeding hopper. Machine is mounted on stainless steel supporting frame.

Nakamura NTJ-100Year of manuf. : 2015 Control : Fanuc 31i-B Turning diam. : 175 mmTurning length : 678 mm____________Description:In General:Year of manufacture:2015Control system:Fanuc i 31-BTurning diameter:175 mmMax. turning length:678 mmSpindle:Technology:Motorised spindleSpeed:4,500 rpmPower:11 kWBar capacity:65 mmC-axis:0.001°Clamping cylinder:Hollow clamping cylinderChuck:Collet chuckSub spindle:Technology:Motorised spindleSpeed:5,000 rpmPower:7.5 kWBar capacity:51 mmC-axis:0.001°Clamping cylinder:Semi-hollow clamping cylinderChuck:Collet chuckTool carrier I (X/Y/Z/B):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:330 mmY-axis:80 mm (+/- 40 mm)Z-axis:1,040 mmB-axis:182° (+/- 91°)Tool carrier II (X/Y/Z):Technology:Tool turretNumber of stations:12/24Tool holder:BMTTool drive:6,000 rpmX-axis:127 mmY-axis:65 mm (+/- 32.5 mm)Z-axis:678  ...

Stock # UG6398 Unused horizontal sand mill with contact parts made of abrasion-resistant stainless steel, manufactured by TEST Sp. z o.o. (Poland) model MP-100. The machine has a 100-liter milling chamber. The mill is equipped with a rotor with abrasion-resistant discs. The machine is belt-driven by an electric motor with a power of 55 kW, 1450 rpm, 400 V, 50 Hz, and IP54 rating. The mill is equipped with a feed pump, electrical control panel with frequency converters and zirconium balls with diameters ranging from ø 1.4 mm to ø 2.7 mm. Included full technical documentation. Year of manufacture: 06-2023.

\" Cutting tools, consisting of end mills, small milling cutters and other tools in various dimensions and designs. The tools are mainly stored in blue sorting boxes. The lot includes a mixture of small and medium-sized end mills, special milling cutters and other cylindrical tools. In some cases, manufacturer and dimensional markings are available (e.g. GARANT recognizable), but no complete list of types or dimensions. Net weight: 14 kg \" Auction-ID: A7-46417-200

Urban AP-B 4000 ProfilbearbeitungszentrumYear of manuf. : 2016 Control : Heidenhain TNC620 Movement X/Y/Z : 4100/420/300 mmTool holder : SK40 ____________Description:In general:Model:AP-B 4000 Automatic Profile Machining CenterMachining length:4,000 mmTravel ranges X/Y/Z:4,100 / 420 / 300 mmMachine cover:Pneumatically operated, opens upwardControls:Operator terminal can move along the machineControl:Heidenhain TNC 620 CNC controlAdditional control:Heidenhain HR130 handwheelTable specifications:Size 16 T-slots, mounted longitudinally to the X-axisWorking surface:4,200 x 420 mmSpindle:Motor power:14 kW S1 / 19 kW S6Motor cooling:Water with additiveSpeed range:100 to 14,000 rpmTorque:74 Nm S1 / 100 Nm S6Drilling capacity in St 60/aluminum:25 mm/30 mmThread size in St 60/aluminum:M20/M30Tool magazine:Tool holder:SK 40Tool clamping system:Spring-loaded clamping system with 9 kN clamping ...

Universal milling machine MIKRON WF3DCM/155 Heidenhain TNC 155 Internal machine no. 58 Travels: X-axis: 500 mm Y-axis: 500 mm Z-axis: 350 mm Table surface: 800 x 450 mm Mount: SK 40 DIN ISO Machine weight: approx. 2.3 t

\" Mixed lot of HSS end mills for metal and tool making. Included are multi-edged milling cutters, mostly spiral grooved, in different diameters and lengths. The lot includes loose milling cutters as well as milling cutters in plastic and original packaging. • Type of tool: • End mills • Material: • HSS / HSS-E • Cutting edges: • Predominantly multi-edged • Spiral grooved • Diameter: • Mixed sizes, including approx. Ø 12 – Ø 40 mm • Packaging: • Loose • Plastic sleeves • Original boxes • Number of pieces: • Approx. 45 pieces Weight • Net weight: 19 kg \" Auction-ID: A7-46417-186

Offer 25462 Technical data: - Drilling capacity in ST 37 to 32 mm - Drill spindle holder with tightening thread M 12 / MK 3 - Drilling spindle speeds 120 to 1600 rpm - Drilling unit height-adjustable by hand crank - Larger distance table / boring spindle 650 mm - Drilling spindle stroke with fine feed by handwheel 130 mm - Drilling spindle projection 205 mm - Drill milling unit can be rotated 360° - Coordinate table with 3 T-slots 730 x 210 mm - Table travel X-axis 250 mm / Y-axis 200 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 1150 x H 1100 x D 1100 mm - Weight approx. 270 kg

44× HSK-A63 Tool Holders   mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled.   The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-11

Year of Make: 2015 Machine type: BC 1001 HS Total production hours: 1608h Total standby time: 5070h

Cobalt milling machine set, 20 pieces High quality HSS M42 - 8% Coabalt milling cutters. Supplied in a beautiful wooden storage box. Technical specifications of the HBM 20-piece HSS - 8% cobalt cutter set. The set consists of the following keyway cutters: 3 - 4 - 5 - 6 - 8 - 10 - 12 - 14 - 16 - 20 mm. The set consists of the following end mills 3 - 4 - 5 - 6 - 8 - 10 - 12 - 14 - 16 - 20 mm. Condition: never used / new (5) Auction-ID: A7-46460-613

48× HSK-A63 Tool Holders   mixed industrial stock: milling cutter holders (Weldon), ER collet holders, drill chucks, extensions, face milling cutter/disc cutter holders as well as various milling cutters (solid carbide), drills, solid drills, etc. Tools partially assembled.   The offer refers exclusively to the named and illustrated tool holders. The cabinet and tool carriers are NOT included. Auction-ID: A7-46417-10

Drilling and milling machine (demonstration machine) with - Cross support - Feed via hand crank - Chip protection - 16mm drill chuck - Mechanical MK tool clamping Drilling capacity in steel 16 mm Projection 180 mm Drilling stroke 85 mm Spindle Holder MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment transverse 230 mm Table adjustment longitudinal 100 mm Table clamping area 420 x 155 mm Connection voltage 230 V Total power requirement 0.75 kW Condition: never used / new (5) Auction-ID: A7-46460-563

Malt Mill Sommer Hafer-Boy Piccolo 150 kg/h This grain crusher can crush various grains, such as oats, barley, wheat, corn, spelled etc. It has two rolls which one is driven by an electric motor with belt drive. Mill was manufactured in year 2106 by German Egon Sommer and it is in good operational condition. Technical Characteristics Manufacturer: Egon Sommer Maschinenbau GmbH Manufacturer’s model: Hafer-Boy Piccolo 11SB Manufacturing year: 2016 Capacity: 100-150 kg/h Number of rolls: 2 Electric motor: 1.1 kW / 400V / 50Hz Main dimensions: 58x40x33 cm (LxHxW) Weight: 64 kg

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - / Contact us at -

SMEC NS 2000 MYear of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mmTurning length : 243 mm____________Description:Work areamax. turning diameter:288mmmax. machining length:243mmX-axis:175mmZ-axis:350mmMain spindleChuck diameter:210mmMax. bar diameter:67mmSpindle bore diameter:76mmDrive power:10.5/20 kWmax. torque:213 NMmax. speed:4,500 rpmTailstockQuill diameter:65mmQuill stroke:80mmAxial force:4,312 NCenter point adapter:MT4Tool turretNumber of tool stations:12Tool holder:BMT45Powered tools:YesMax. speed:5,000 rpm

Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5) Auction-ID: A7-46460-525

Equipment: - Digital display - Coolant system - Huron milling head - Emergency stop facility - Documentation x-travel 710 mm y-travel 250 mm z-travel 400 mm Table size 1200 x 300 mm Conventional control Mounting SK40 Speed range 50 - 2500 rpm Total power requirement 2.2 kW Machine weight approx. 1.7 t Dimensions L x W x H 2.1 x 2.0 x 1.6 m Auction-ID: A7-46460-413

Equipment: 3-axis digital display. Pinole path has separate digi display. Automatic feed in X-axis and quill. Motorized Z-axis. Tapping device. Coolant system. Machine base. Collet set, SK tool holder. Other machine accessories in box. Drilling capacity in steel45 mm Quill stroke 125 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm Spindle speeds 75 - 3200 rpm max. cutter diameter 80 mm Spindle holder ISO 30 max. distance between work table and spindle nose 460 mm Projection 230 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 580 kg Space requirements approx. 1.2 x 1.0 x 2.1 m Condition: never used / new (5) Auction-ID: A7-46460-554

Universal Milling Machine - Huron Head - Mounting device for Huron head - horizontal counter holder - Documentation - Coolant system - Machine feet x-travel 700 mm y-travel 250 mm z-path 300 mm Table size 1000 x 230 mm Spindle holder ISO 40 Spindle speeds 35- 1500 rpm Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.55 x 1.4 x 1.65 m Auction-ID: A7-46460-457

Facilities Two-stage gearbox via flat belt (no longer plastic gears) Infinitely variable speed range Quill fine feed via switchable handwheel Digital quill depth display Right-left rotation Robust dovetail guides with adjustable wedge strips Bellows covers for the guideways Adjustable control panel Chip protection with safety circuit Machine base optional. Drilling capacity in steel 25 mm Projection 185 mm Drilling stroke 50 mm Spindle mount MK 3 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 178 mm Table adjustment longitudinal 480 mm Table clamping area 700 x 180 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 160 kg Space requirement approx. 0.75 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46460-495

Machine equipped with: - Digital display - Machine light - Coolant device - Machine feet Technical Details / Accessories / Addition: Value Unit Technical data: x-travel 600 mm y-travel 270 mm z-travel 430 mm Upper slide - travel 630 mm Table size 1120 x 270 mm Spindle speeds: 45 - 1660 rpm Spindle holder SK 40 Conventional control Spindle drive 2.2 kW Total power requirement 2.4 KVA Machine weight approx. 1.35 t Dimensions L x W x H 1.8 x 1.4 x 1.8 m Auction-ID: A7-46460-472

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5) Auction-ID: A7-46460-501

Drilling/milling machine with: • Drilling capacity 40mm • Milling capacity 32mm • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 730 x 210 mm Connection voltage 400 V Drill feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.1/1.5 kW Machine weight approx. 0.35 t Space requirement approx. 0.8 x 0.75 x 1.85 m Condition: never used / new (5) Auction-ID: A7-46460-536

Technical data Manufacturer: MAHLO Type: FU 1300 Machine number: 2257 Voltage: 220–380 V / 50 Hz Clamping surface: 1300 x 300 mm T-slots: 5 (spacing 60 mm) Travel (X/Y/Z): 950 / 275 / 500 mm Spindle holder: ISO 40 Speed range: 30–1200 rpm Weight: approx. 1750 kg Configuration Accessories: 1 HILMA machine vice, 1 RÖHM four-jaw chuck, diameter approx. 200 mm Application: General milling work in tool and mechanical engineering Auction-ID: A1-46480-2028

Equipment: - Digital display - Coolant system - Milling head with quill x-travel 600 mm y-travel 400 mm z-travel 320 mm Table size 900 x 420 mm Conventional control Mounting SK40 Speed range 35.5 - 1800 rpm Quill stroke yes mm Total power requirement 5.0 kW Machine weight approx. 1.45 t Dimensions L x W x H 1.6 x 1.2 x 1.9 m Auction-ID: A7-46460-444

Universal Milling Machine - Digital display - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Counter bearings - Chip tray x-travel 400 mm y-travel 320 mm z-travel 440 mm Table size 80 x 325 mm Spindle holder ISO Sk 40 Spindle speeds: 63 - 3150 rpm Quill stroke 60 mm Total power requirement kW Machine weight approx. 1.5 t Dimensions L x W x H 1.8 x 1.8 x 1.9 m Auction-ID: A7-46460-540