mill used for sale

x-travel: 1750 mm y-travel: 1400 mm z-travel: 700 mm control: Heidenhain TNC 530 Torque: 101 Nm turning speeds: 15000 U/min spindle taper: HSK A63 engine output: 22 / 18 kW table-size: 1200 mm table load: 5000 kg tool change unit: 60-fach column daylight: 1430 mm distance table - lower edge spindle: 105 - 905 mm A-Axis: 360 / 0,001 ° B-axis (table): 0,001 ° column daylight: 1430 mm total power requirement: 52,9 kW weight of the machine ca.: 22 t dimensions of the machine ca.: 6,2 x 3,75 x 4,3 m 5 axes simultaneous - CNC control Heidenhain TNC 530 - Milling head - Coolant design: external cooling + air, internal cooling + air (60 bar) - Tool changer 60-fold (HSK-A63) - chip conveyor - Electronic handwheel - CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Drilling and Milling Machine Manufacturer: PAMA FT 180 A YOC 1982 Travel distances: X = 12000 mm Y = 4500 mm Z = 1700mm approx. Control: Siemens Sinumeric840 Tool changer: 60 times 3 pcs PAMA heads. Drills, milling machines, etc. Without table Plates are included. From the foundation.

A Traub CNC automatic lathe including a bar feeder and chip conveyor is offered. Max. bar diameter: 42mm, min./max. bar stock diameter: 12mm-42mm, turning diameter: 42mm, turning length: approx. 250mm, max. speed: 4000rpm, main spindle stroke: 100mm, main spindle feed force: 1600N, number of cutoff slides: 4, X-axis slide stroke: 60mm, cutoff slide working stroke: 33mm, cutoff slide feed force: 4kN, cutoff slide rapid traverse: 15m/min, cutoff slide feed rate: 2.5m/min, slide dimensions X/Y: 112mm/320mm, guide width: 30mm, turret slide X/Z-axis: approx. 80mm/245mm, rapid traverse X/Z: 15m/min/15m/min, feed force X/Z: approx. 3200N/9000N, tool stations: 8, tool holder diameter: 25.4mm, max. turret indexing time: approx. 0.9s, remnant part dimensions X/Y: 42mm/240mm, max. workpiece dimensions for back-side machining X/Y: 42mm/100mm, longitudinal stroke for back-side machining: approx. 115m ...

Milling cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stroke between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Pneumatic material feed via foot switch Weight: approx. 280 kg

x-travel: 1200 mm y-travel: 400 mm z-travel: 460 mm table-size: 1500 x 400 mm control: konventionell tool adaptor: SK40 turning speed range: 45 - 2000 U/min quill stroke: ja mm total power requirement: kW weight of the machine ca.: 3,2 t dimensions: 2,8 x 2,5 x 2,1 m Equipment: - ELESTA digital display - Infinitely variable feed - Coolant system - Horizontal milling attachment - Chip guard - Chip trays - Hydraulic machine vice - Machine light - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications DRO visualization ISO 50 Cross travel (Z) (mm) 1000 Vertical displacement (Y) (mm) 1000 Longitudinal displacement (X) (mm) 2000 Table size (mm) 2400 x 1200 Workpiece spindle speed 15 - 1450 Voltage 400V Hertz 50

x-travel: 10.000 mm y-travel: 2.200 mm z-travel: 1.300 mm control: HEIDENHAIN TNC 640 clamping table: - surface area: 11.000 x 2.000 mm max. workpiece weight: 10.000 kg/m² Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 2,5 x 2,5 ° Hirtverzahnung Constant Power at 100 % ED: 43 kW Speed range, stepless: 15 - 5.000 min-1 max. torque: 900 Nm tool taper: SK 50 – DIN 69871-AD internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/250 mm workpiece length: 400 mm weight of tools max.: 20 kg internal coolant system feed: durch das Spindelzentrum changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min max. feed force X-Y-Z-axis: 16.000 N weight of the machine ca.: 40 t dimensions of the machine ca.: 18,2 x 6,0 x 4,9 m • Universal milling ...

X-axis (longitudinal) 1600 mm Z-axis (vertical) 710 mm Spindle speed 1600 rpm Table width 560 mm In very good condition Y-axis (transverse) 750 mm CNC Type ECS Table length 2000 mm ISO 50 spindle attachment

This 4-axis Hyundai Wia L2100SY turn-mill centre was manufactured in 2012. It features a maximum turning diameter of 335 mm and a turning length of 455 mm. The machine is equipped with a 12-station turret and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the Hyundai Wia L2100SY machine we have for sale. Contact us for further details.

Ref.nr 00912 Name of the equipment gear hobbing machine The machine is suitable for the economical production of cylindrical gears, gears and gears in individual and series production. Thanks to its robust design and high precision, the PFAUTER is still a sought-after machine in the field of Tool and gearbox construction Manufacturer: Pfauter Model P160HI Built in 1970 Technical data: Wheel diameter: max. 160 mm Wheel width: max. 355 mm Module range: 0.5 – 4.5 Milling cutter diameter: max. 115 mm Milling cutter length: max. 105 mm Milling head swivel range: 120° Speed: 400 rpm Center width: 410 mm Machine dimensions (L x W x H): approx. 2,000 x 1,500 x 2,000 mm Condition Technically OK, currently in dismantled condition in the warehouse Covered can also be demonstrated if necessary, with the agreement of the seller Submission date immediately

This 6-roller mill from Künzel Maschinenbau GmbH is a reliable and powerful solution for malt grinding in breweries. With a capacity of up to 3 tons per hour of coarse grind, it is well suited for medium to high throughput operations. The mill is powered by a 7.5 kW motor running at 1450 rpm and delivers consistent and efficient grinding results. The system comes complete with a grist container and grist transport, making it a ready-to-use solution for integration into existing brewhouse systems. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 6 roller mill, Capacity: 3 t/h coarse grist, Rotation per minute of the motor: 1450 1/min, Power: 7,5 kW motor capacity, Features: 6 roller , Periphery: grist case, grist transport

X-axis (longitudinal) 2000 mm Y-axis (transverse) 1200 mm Z-axis (vertical) 1500 mm Table length 1300 mm Table width 1100 mm Max workpiece weight 4000 kg Spindle diameter 100 mm Spindle speed 2500 rpm Spindle motor 15 kW Length x width x height 2000.0 × 1200.0 × 1500.0 Weight 12500 kg

- – (manufacturer Kern) The 2-roll mill from (built in 2018) is ideal for dry grinding barley malt. The rollers can be precisely adjusted via . . and are driven by a . via a V-belt. The mill stands on a sturdy tubular frame and is equipped with a feed hopper, protective grille, bagging spout, and bag buckle. In addition, the machine is supplied with a plate scale from the manufacturer Kern, which offers a weighing range of up to 150 kg and has a readability of 20 g (bottom) and 50 g (top). With compact dimensions of 1250 mm in length, 1750 mm in width, and 1670 mm in height, as well as a weight of 124 kg, this mill is ideal for small to medium-sized breweries or laboratory applications. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: 2-roller mill for dry milling, Capacity: 600 kg/h, Adjustable cracking clearance: 0.2 to 4.5 m ...

Dental colloid mill Manufacturer: Probst & Class PUC Type 10 L Power 7.5 kW U/2.910 min.

Hammer mill Manufacturer Condux Stainless Steel

Year of manufacture: 1989 - 1992 Capacity: 4 - 7.5 kW Insertion 260 x 260 mm with or without conveyor belt

boring mill, year 1990, CNC 4045D - v1.12.8. Used machine in good condition. More info & price on IndustrialBuyer.

boring mill, year 1990, CNC 4045R. Used machine in good condition. More info & price on IndustrialBuyer.

boring mill, year 2018, CNC iTNC 640. Used machine in good condition. More info & price on IndustrialBuyer.

The BRETON MATRIX 1300 DY K30 is a 5-axis CNC gantry machining center with a movable gantry design for high-precision complete machining of large workpieces. The rigid steel construction, combined with direct measuring systems and high-dynamic axis drives, ensures high positioning accuracy and consistently stable machining quality. The machine is equipped with a HEIDENHAIN iTNC 640 HSCI CNC control system, including AFC (Adaptive Feed Control) , AVD (Active Vibration Damping) , and CTC (Cross Talk Compensation) . These functions optimize the machining process, reduce vibrations, and improve surface quality and process reliability. The 40 kW high-speed spindle with up to 28,000 rpm features programmable internal cooling (IKZ) from 40 to 70 bar and is suitable for demanding milling operations on a wide variety of materials. The equipment includes a direct-drive NC rotary table Ø 3,500 mm ...

An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling ...

A Deckel CNC universal milling machine is offered. Travel X/Y/Z: 700mm/600mm/550mm, quill stroke: 80mm, milling head swivel range: +/-90°, spindle power: 12kW, max. spindle speed: 6300rpm, feed torque X/Y/Z: 13Nm/13Nm/21Nm, feed rate X/Y/Z: 6m/min, rapid traverse X/Y/Z: 6m/min, tool holder: SK40, measuring resolution: 0.001mm, 4th axis resolution: 0.001°, max. slide load: 1000kg, number of T-slots: 1, T-slot width: 14H7mm, mounting holes for table accessories: M12, control: Deckel Dialog 11. Machine weight: approx. 3900kg, electrical cabinet weight: approx. 475kg, 5110mm/4654mm/2335mm, floor space X/Y: approx. 6200mm/5700mm, floor load: 3500kg/m². Documentation available. Inspection by appointment possible.

Inv. Num. : 9324 Type: 3000x2100 Producer: CYBERTRONIC Robotic Created: 2022 Parameters: Work table length: 3000 mm Work table width: 2100 mm Number of Spindles: 2 pieces The offer includes: Blower/suction unit Dust Extraction OP-2200 Piston compressor MK 103-90-3M PC and software for CNC control Cables Basic accessories

spindle diameter: 100 mm x-travel: 1400 mm dismantled: ja tool adaptor: SK 50 digital: ja weight of the machine ca.: 14 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Milling shaft: Ø 40 x 550 mm Speed: 4400 rpm Table stroke: 500 mm Installed power: 11 kW

A hydraulic three-roll mill Lehmann for fine grinding, dispersing and homogenizing is available. Working width: 600mm, roll diameter: 300mm, weight: approx. 1900kg. Including electrical control cabinet and accessories. Documentation available. An on-site inspection is possible.

GeneralHorizontal Machining Centre in travelling column construction; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal630 mmCross800 mmVertical850 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range -12000 rpmSpindle taper HSK-A 63CabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet changerTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis ...

This 3-axis DELTA LGT2113 PRO gantry milling machine was manufactured in 2016. It features a working area of 2100 mm in the X-axis and 1300 mm in the Y-axis, equipped with a powerful 3.6 kW spindle capable of reaching 50,000 rpm. The machine includes a 12-position automatic tool changer and a 4-zone vacuum table, making it suitable for various milling and specialized cutting applications. If you are looking to get high-quality milling capabilities, consider the DELTA LGT2113 PRO machine we have for sale. Contact us for further details.

Technical data (XYZ): X 3500 mm / Y 2500 mm / Z 1700 mm Control: HEIDENHAIN iTNC 530 Miscellaneous: 40-tool changer, spindle Ø130 mm, 3000 rpm, T-slot clamping table 2400 × 2000 mm, spindle extension 730 mm, chip conveyor, coolant system with filter unit, separate cooling unit, protective fence enclosure.

A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.

TECHNICAL DATA: Working dimensions: max. 1300 x 100 x 60 mm 02 Milling axes Milling cutter axis: Ø 30 mm Usable height of the milling cutter: max. 80 mm Speed: 7000 rpm 03 vertical drilling units 01 Mortising machine Equipped with automatic feeder Installed power: 13 kW

A Mori Seiki CNC turning and milling center with counter spindle including automation is available. Tool turrets: 3, tool stations: 3×16, live tools: all stations, X-axis travel: 210mm, Z1/Z2/Z3-axis travel: 300mm/810mm/300mm, main spindle bore: 55mm, spindle speed: 6000rpm, automation robot: LR Mate 200iC 5L, payload: 5kg, reach: 892mm, repeatability: 0.03mm. Machine dimensions X/Y/Z: approx. 3800mm/2700mm/2500mm, weight: approx. 8900kg, control: Fanuc 31i-A, power-on hours: 101035h, operating hours: 68322h, process hours: 34697h. Including an automated CO2 fire detection system, transformer, machine extraction system, 4× workpiece carriers and an automatic diameter detection system. Documentation available. An on-site inspection is possible.

Technical data: Manufacturer: Kunzmann Type: WF4 CNC Year of Make: 1999 Control: Heidenhain TNL 410 Travel: X 400 mm Y 320 mm Z 400 mm Working spindle Speed: 0 – 4,000 rpm Work table Dimensions L/W: 650 x 350 mm Tool/movement Tool holder: SK40 Quill stroke: 60 mm Dimensions and weight Dimensions: approx. 2,500 x 1,800 x 2,000 mm Weight: 1,800 kg Condition Condition: Used Functional: Tested and fully functional

A CNC 3-axis bed milling machine by Auerbach is offered. Travels X/Y/Z: 2000mm/1000mm/900mm, table load: 6000kg, tool interface: SK50, tool stations: 46, spindle speed: 3500rpm, operating hours: 38000h, control: Heidenhain TNC426, including SEMPUCO KFU-2/45/021 universal milling head, weight: 200kg. Equipped with a 3D infrared probe, electronic handwheel, chip conveyor with coolant system, large air conditioning unit for the electrical cabinet, milling table with 5 T-slots at 22mm. Machine dimensions X/Y/Z: 5500mm/4100mm/2700mm, weight: 13t. Complete machine overhaul by the manufacturer in 2015. Drive motor for the Z-axis available as a spare part. Documentation available. Inspection possible by appointment.

CONTROLS   CNC controls FANUC 31I MODEL A BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes   number of c-axes: 2   number of y-axes: 1 WORKING RANGE TURNING   turning diameter (max): 230 mm   worpiece length max.: 700 mm MAIN SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 5000 /min   c-axis: yes COUNTER SPINDLE   spindle revolutions (min): 50 /min   spindle revolutions (max): 6000 /min   c-axis: yes X/Z SLIDE   tool fixture: Turret ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2800 mm   space requirements -front/back-: 1630 mm   total height: 2200 mm   total weight approx.: 9000 kg ATTACHMENTS (TURNING)   chip conveyor: yes   coolant unit: yes   band filtration unit: yes   coolant through  ...

We offer the following machine directly on behalf of the owner. It was delivered in 2026, but due to a change in demand, it will not be used. The machine is in its original packaging and unused. 5 - Axis CNC Portal Milling Machine, New Make : HURCO Type : DCX 32-5 Si Year of manufacture : 2025, Delivery 3 / 2026 Control: MAX 5, 2 screens TRAVELS X-axis: 3,200 Y-axis: 2,100 Z-axis: 900 mm B-axis: +100°/-110° C-axis: ±360° TABLE Table size: 3,000 × 1,700 Table load: 11,000 kg Distance between portal stand: 2,130 mm Distance spindle nose to table: 66 – 966 mm SPINDLE / HEAD Clevis CYTEC Tool holder: HSK63-A Max. speed: 18,000 rpm Power : 63 kW Max. torque: 106 Nm Rapid traverse: 15/15/10 m/min Tool Changer / ATC : 60 - speed EQUIPMENT : - IKZ internal cooling by spindle 40 bar - KNOLL belt filter system - KNOLL chip conveyor - Di ...

Key data: 6500 mm, 2000 mm, 1200 mm

Testa automatica universale: indicizzazione automatica ogni 2,5° × 2,5° per la massima versatilità nelle lavorazioni multiangolo Magazzino utensili: automatico per rapidi cambi utensile e maggiore produttività Grazie alla sua ampia area di lavoro e alla testa universale automatica, la SORALUCE SP8000 è ideale per operazioni di fresatura, alesatura e foratura su componenti di grandi dimensioni destinati ai settori della meccanica generale, energia, stampi e costruzioni industriali. VISIBILE MONTATA FINO A FINE SETTEMBRE 2026!

A Takamatsu CNC twin-spindle turning and milling center is available. 1) Turning diameter: 190mm, turning length: 150mm, max. one-sided machining length: 440mm, max. bar diameter main spindle/counter spindle: 51mm/42mm, spindle nose 1/2: A2-6/A2-5, spindle bearing 1/2: 100mm/85mm, main spindle bore 1/2: 52mm/43mm, spindle speed: 5000rpm, tool stations: 2×12, travel X1/X2: 162.5mm/170mm, travel Z1/Z2: 500mm/500mm, travel Y: +/-35mm, travel A: 550mm, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2100mm, weight: approx. 7400kg, control: Fanuc 32i-B. 2) TOP Automazioni FU350SX bar feeder, max. bar capacity: 52mm, max. bar length: 3200mm, max. remnant length: 300mm, max. feed rate: 30m/min, max. bundle weight: 2000kg, machine dimensions X/Y/Z: approx. 4300mm/1400mm/1200mm, weight: approx. 1200kg. 3) LTA E 120-X-2-H filtration system, year of manufacture: 2022, filter stages: 2, extraction  ...

x-travel: 560 mm y-travel: 320 mm z-travel: 400 mm turning speeds: 25 - 2000 U/min turning speeds: 18 Stufen spindle taper ISO: 40 SK quill stroke: 100 mm table:: 320x1000 / 450x950 mm table load: 125 kg feed range: 5 - 600 mm/min feed: 18 Stufen rapid traverse: 1200 mm/min total power requirement: 5,4 kW weight of the machine ca.: 1780 kg. range L-W-H: 1800 x 1500 x 1780 mm From a training workshop - good condition () Commissioned in April 2017 Features: - 3-axis digital display - Ball screws on the X and Y axes - Rapid traverse in all 3 directions - Electromagnetic brake for spindle stopping - Coolant system - Chip tray - Vertical milling head with quill adjustment Milling head rotation 90° ISO 40 tool holder - Fixed box table 950 x 450 mm Number/size of T-slots: 7 / 14.0 mm T-slot spacing: 63 mm Minimum distance between base table and spindle axis: 163 mm - Machine light - S ...

Control Heidenhain ... TNC 620 Spindle diameter ... 100mm Axis X ... 1250mm Axis Y ... 1030 mm Spindle speed ... 16-2500 rpm Axis W ... 730mm Axis Z ... 930mm ISO 50 Rapid traverse ... 8m/min Table dimensions... 1000x1120mm Max. table load ... 3000kg L x W x H ... 5000x3050x2800mm Machine weight ... 11500kg The machine has undergone a complete overhaul. With a one-year warranty.

x-travel: 7000 mm y-travel: 2800 mm z-travel: 1100 mm spindle turning speed - stepless: max. 4000 U/min spindle drive motor: 30 kW column daylight: 2550 mm table-size: 8000 x 2000 mm tool taper: ISO 50 feed range: 1 - 15000 mm/min c-axis: +/- 105 ° b-axis: 360 ° Control: Siemens 840D total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 14,8 x 7,9 x 5,4 m Retrofit end of 2026 - CNC control Siemens Sinumerik 840 D - ATC for 40 tools (ISO 50) - 2 axis universal Milling head - Coolant - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

COPY SHAPER and SANDER machine , automatic , model PADE UINZE 2+2 second hand machine working condition : Excellent CE mark : YES the machine has been designed for the production of parts of tables , chairs , furniture , etc. the machine executes shaping and sanding operations simultaneously on two sides of a workpiece , with the aid of a template prepared according to the desired shape with accident prevention cabin as shown in the photo machine composed by n.04 working units : 1+1 shaping units . motor power Hp 10 each one 1+1 shaping / sanding units . motor power each one Hp 5 / 6,5 ( 2 speeds ) max. working width mm.350 max. workinh heigth mm.180 max. working length mm.2500 hydraulic carriage . pump motor power Hp 5,5 adjustable hydraulic carriage advance speed: 1:15 m/min. hydraulic carriage return speed: 40 m/min. volt. 380/50 total installed power Kw 30 we ...

MIKRON VCE 1000X PRO CNC machining center was manufactured in 2012 (launched in 2013) in Switzerland by Mikron Agie Charmilles AG. The machine is designed for the precision machining of workpieces made of, among others, steel, cast iron and aluminium. The combination of a stable design and high-quality components guarantees the best machining results. This makes the CNC milling machine ideal for use in production plants, both for unit and series production. Workpieces are machined by means of a efficient spindle with a maximum speed of 16000 rpm, which ensures fast and precise cutting of the material. The process is further streamlined by a 40-position tool magazine, which minimises machine downtime during operation. Inside the fully illuminated work space, there is a large worktable with T-slots designed for the easy mounting of workpieces and fixtures. The MIKRON VCE 1000X PRO is ...

AFM DEFUM BACA R-1000 CNC vertical machining center was built in 2013 in Poland by Andrychowska Fabryka Maszyn S.A. The machine is designed for the precision machining of workpieces with a maximum weight of 500 kg. The combination of a stable design and high-quality components guarantees the best machining results. This makes the CNC milling machine ideal for use in production plants, both for unit and series production. Workpieces are machined in three axes X, Y and Z with feeds of 1000 mm, 510 mm and 560 mm respectively. To ensure excellent dynamics and repeatability of feeds, all linear axes are driven by efficient servo drives. The spindle, operating at a maximum speed of 8000 rpm, features a BT40 taper, which enables the use of a wide range of cutting tools designed for various machining operations. The work table with a length of 1200 mm and a width of 500 mm is equipped with T- ...

Bed milling machine Anayak VHPlus 2000 Travel: X: 2,000mm Y: 1,200mm Z: 1,050mm Diagonal milling head 45° Spindle: SK50 Power: Kw 30/35 Spindle speed: 4,000 rpm Coolant system Tool changer: 30 places, chain magazine Control: Heidenhain TNC426 Handwheel Export documentation and export possible for an extra charge. Viewing possible under power. We will be happy to send you further details or arrange an on-site exposure.

A Zayer CNC bed-type milling machine requiring repair is offered for sale. X/Y/Z travels: 2500mm/1000mm/900mm, table size: 2500mm/800mm, max. table load: 6000kg, spindle power: approx. 38kW, tool taper: ISO 50, max. spindle speed: 1800rpm, control: Fidia C1. Dimensions: 7500mm/3300mm/3100mm, weight: approx. 13.5t. The machine has received a new cylinder but currently still displays an error. Inspection by appointment is possible.

Key data: 3050 mm, 800 mm, 850 mm

From location: CNC Bed Milling Machine Manufacturer: TOS Kurim Type: FSS 80 Year of Make: 1991 Control: Heidenhain TNC 407 Two-spindle H-V head that rotates automatically programmatically (horizontal/vertical) • Table clamping surface 800x3000 mm • X-axis working stroke (longitudinal) 3050 mm • Transverse stroke 800 mm • Vertical working stroke 850 (790) mm • Spindle taper ISO 50 • Spindle turning range 9 - 2000 rpm -1 • Working position. continuous 1 - 3000 mm / min -1 • Fast feed .. 8000 mm/min -1 • 22 kW spindle motor • Machine dimensions 7660x3470x2740 • Total machine weight 14400 kg

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with Siemens SINUMERIK ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minNC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationTool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine)Tool magazine 60 pocketsTool magazine 60 places HSK-A63 Vertical chain with double gripper incl. set up station for tool loadingChip removal package with cabin roofSwarf removal package chip conveyor Coolant - air-blast changeover Swarf con ...

Profile height: max.150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Minimum quantity spraying device 2 pneumatic copy bolts with copy pin 5/ 8/ 10 mm

Manufacturer SORALUCE Model SP-8.000 Year of Manufacture 2011 CNC HEIDENHAIN iTNC 530i Table Table surface 8,000 x 1,300 mm Max. permissible weight on table 5,000 kg/m2 Tours Longitudinal Course (X-Axis) 6,500 mm Transverse Length (Y-Axis) 2,000 mm Vertical Course (Z Axis) 1,500 mm Fast Forward Axles 25,000 mm/min Head Automatic head 1º / 1º INCLUDED 5-sided machining INCLUDED ISO 50 Head Cone DIN 69871A Head speed 20 – 4,000 r.p.m. No. of ranges 2 Main Motor Power 32 kW Torque 910 Nm Automatic tool loader Tool Loader Positions 40 Additional equipment Chip evacuator INCLUDED Heidenhain HR-550 FS Wireless Electronic Steering Wheel 2 extra tables (1000×400 mm) INCLUDED Air/oil head lubrication INCLUDED User platform INCLUDED M&H 20.41 MULTI wireless probe Others Total installed power 51 kW Machine Weight 26,800 kg.