mill used for sale

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

x-travel: 10000 mm y-travel: 3000 mm z-travel: 1500 mm Control: Heidenhain TNC 430CA milling head -swivable: 360.000 pos spindle turning speed range: 10 - 3000 U/min Tools changer: 40 pos. feed: 5000 mm/min Rapid Travel X / Y / Z-Achse: 10 / 15 / 15 m/min spindle motor: 37 kW total power requirement: 80 kVA weight of the machine ca.: 40 t dimensions of the machine ca.: m Traveling column milling and boring machine - Control Heidenhain TNC 430CA & HR 410 - autom. Tool changer with 40 places (SK 50) - Huron Universal milling head, automatic Positioning (A-/B-Axis each 0,001°) - Chip conveyor - OPTIONAL: Rotary Table 3000x3000mm - 30t (W-Axes: 2000mm), with independent FAGOR CNC Control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPINDEL 115 , ISO 50 , X,Y,Z - 2000 DRO TABLE 1400 X 1600

Fanuc + 3 Breton machining centers

A self-built CNC milling machine by Klein GmbH is available. Travel X/Y/Z: 980mm/415mm/90mm, machine dimensions X/Y/Z: approx. 2200mm/1550mm/3000mm. An on-site inspection is possible.

x-travel: 400 mm y-travel: 320 mm z-travel: 450 mm Control: Haidenhain TNC 124 drive of main spindle: 3 kW number of spindle speeds: 63-3150 u/min tool taper: SK 40 stroke of quill vertical: 60 mm feed speeds: 5-2000 mm/min rapid traverse: 2 m/min work table:: 800x320 mm coolant: 20 l/min total power requirement: 5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,2x2,4x1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

8-fold roller mill BÜHLER MDDL 250 x 1000 mm B1/B2 - C1A/C2, 1 x grain feed (shaft/corrugation), 1x semolina feed, Knife scraper, gearbox converted to belt Original Bühler retrofit Feed drive B1 converted to geared motor Hand switch converted to solenoid valve Inlet and outlet divided Good condition!

Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

bore capacity in steel (diameter): 45 mm quill stroke: 125 mm : 560 mm : 230 mm table surface area: 800 x 240 mm spindle turning speed range: 75 - 3200 U/min max. milling cutter diameter: 80 mm spindle taper: ISO 30 max. distance between table and spindle-nose: 460 mm throat: 230 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 580 Kg dimensions of the machine ca.: 1,2 x 1,0 x 2,1 m Equipment: All axes with 3-digital display. Quill travel has separate digit display. Automatic feed in X-axis and quill. Motorized Z-axis. tapping device. coolant system. machine base. Collet set, SK tool holder. Further machine accessories in box. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 730 x 210 mm connected load frequency: 400 V boring feeds:: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in top condition Edge milling machine for simultaneous upper and lower flush milling of protruding edges such as PVC, ABS, melamine and real wood veneer. Milling of the edge can be carried out on square, round, curved, workpieces with outer and inner radius. The machine is the ideal complement to the edge banding machine B 56, B 560. The two vertically operating HF flush milling motors, 18000 rpm, are equipped with indexable insert knives (R=2 mm). With driving equipment. Pull-out support at the front. Pneumatic excavation. Control panel position : top Total connection: 2 kW Working height or feed table height : 850 mm Workpiece thickness (radius milling): approx. 16-55 mm Workpiece width min. approx. 30 mm Edge thickness: 0.4-3.0mm Inner wheels min. approx. 50 mm Weight approx. : 155 kg Dimensions : approx. 1000 x 750 mm

Used HydReclaim Film Recycling System Manufacturer: AEC inc. USA Model 812 Electricity: 400 VAC, 50-60 Hz, 3-phase AEC Hydreclaim fluff weigh system Model 50 cubic foot

Stock number: 4001 PROCESSING Manufacturer: MAZAK, Type: VCN 410A-II Year of Make: 2009 Specifications: Table size 900 x 410 mm Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 510 mm CAT 40 spindle cone Infinitely variable spindle speeds 12000 rpm Spindle motor 11/7.5 Kw Tool changer 30 places Control Mazak Matrix Fabr. Controlled in axes 3 Operating hours spindle 7746 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Tool Measuring Length: 2600 mm, Height: 2800 mm, Width: 2000 mm, Weight: 5010 KG

Stock number: 4000 PROCESSING Manufacturer: MAZAK, Type: VCN 510 C Year of Make: 2006 Specifications: Table size 1350 x 550 mm Large table load 1000 kg Longitudinal movement (X) 1050 mm Transverse movement (Y) 510 mm Vertical movement (Z) 510 mm Spindle cone MAS 40 Infinitely variable spindle speeds 12000 rpm Tool changer 30 places Control Fusion 640 Fabr. Operating hours spindle 7419 hours Accessories: Cooling by spindle 15 bar Chip conveyance. Length: 2800 mm, Height: 2800 mm, Width: 2900 mm, Weight: 7100 kg

x-travel: 7000 mm y-travel: 2000 mm z-travel: 1250 mm control: Heidenhain iTNC 530 plate size: 7000 x 1500 mm tool change unit: 60 Pos turning speeds: 35 - 4500 U/min spindle motor: 37 kW rapid traverse: 20 / 10 m/min total power requirement: - kW weight of the machine ca.: - t required space: - m equipped with: - Heidenhain iTNC 530 CNC control - Tool changer for 60 tools (ISO 50) - autom. Milling head (0,001 °) - Spindle cooling 15bar with paper band filter - Chip conveyor - Renishaw RMP 60 - Extra Miling Head (Spare Part) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mounting plate with JCB / Miller / Geith mount, - Suitable for demolition and sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Recording: JCB / Miller / Geith, - Hole pattern: 36 x 48 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Deckel FP5A CNC milling machine with Dialog 11 control. The machine is mechanically in good condition Stands in a hall almost rust-free. Accessories: Angle table

Bouw-/werkverplaatsingen (veelgenoemde waarden): X-as (longitudinaal): ~200–300 mm Y-as (dwars): ~200–400 mm Z-as (verticaal / hoogte): ~127–450 mm Tafel / opspanvlak (veel voorkomende afmetingen): ca. 600 × 430 mm of opspanvlak 250 × 700 mm 1.3 kW nbsp; Speeds: 50-10 000 rpm Weight: 1300 kg

DECKEL FP 2 Tool Milling Machine Machine Details: Manufacturer: Lid Type: FP 2 Year of construction: approx. 1978 Condition: very good, technically tested and partially overhauled Availability: available on order The Deckel FP 2 is considered the reference among universal milling machines – robust, precise and reliable. Specifications: Travel: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds: 8–400 mm/min Rapid traverses: approx. 1.5 m/min Digital display: 3-axis SINO Dimensions (LxWxH): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Equipment & Accessories: Vertical & horizontal milling equipment Drill quill 3-axis digital display SINO Coolant Setup Work light C ...

x-travel: 500 mm y-travel: 350 mm z-travel: 375 mm turning speed range: 63 - 4000 U/min spindle taper ISO: 40 table surface area: 800 360 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressta Eisele Panto 300 copy milling machine - Very good condition - With frequency converter and HF motors - With stop system

Milling machine Mikron UM600 BJ 1998 defective

Key data: 4230 mm, 2100 mm, 850 mm

X-axis: 4,230 mm Y-axis: 2,100 mm Z-axis: 850 mm CNC control: Heidenhain TNC 530 Spindle mount: ISO 50 Spindle speed: 6,000 rpm Tool changer: 30 places Table dimensions: 4,000 x 1,650 mm Stand spacing: 2,300 mm Equipped with: - Angle milling head - Touch probe button - Inner spindle cooling - Double chip conveyors - Cooling system -Operating instructions Country of origin: Taiwan Machine LxWxH: 9,000 x 3,500 x 4,000 mm +/- Machine weight: 30,000 kg

x-travel: 400 mm y-travel: 350 mm z-travel: 400 mm turning speed range: 1 - 4000 U/min spindle taper ISO: 40 table surface area: 650 350 mm Control: Heidenhain TNC 124 total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2 2 2 m Equipment: Electronic handwheel Tool cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal tool milling machine DECKEL FP 3 With 3 axes active digital display Heidenhain TNC 11 Year of Make: 1984 Travel: X 500 Y 300 Z 400 Speed range: 25 – 2500 rpm With the following accessories: Rigid angle table 850 mm x 400 mm clamping surface Swivel rotary table 0 450 mm with dividing discs Bumper Sliding vertical milling head Extendable drill quill Stepless feed via potentiometer Various milling mandrels SK 40 / S22 x 2 Chip tray Automatic lubrication pump for X,Y,Z axis Machine Light Coolant Setup 4 pcs machine shoes Operating instructions

Impact crusher with inlet opening 1,000 mm x 350 mm, throughput capacity: up to 30 to./h (manufacturer's specs), maximum feed size: 300 mm, required drive: 37 kW. Except for the drive, all parts (doors, inlet, etc.) are available, but currently not assembled. The scope of delivery also includes an extensive wear parts package.

A conventional universal milling machine H. Ernault Somua is available. Table dimensions X/Y: 1600mm/370mm, travel X/Y/Z: 1000mm/320mm/440mm, spindle taper: ISO50, speed: 2000rpm, power: 7.3kW. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1600mm, weight: approx. 2500kg. The NC display and coolant system are defective. The machine shows an offset of 0.4mm on the X-axis. An on-site inspection is possible.

Two nearly identical Maho milling machines, one with and one without a tool changer, as well as a complete range of accessories/spare parts, are available. Travel X/Y/Z: 600mm/450mm/450mm, tool holder: ISO40, quill stroke: 80mm, spindle speed: 5000rpm, feed rate: 4m/min, rapid traverse: 6m/min. Tool diameter: 130mm/100mm, max. tool length: 250mm, max. tool weight: 6kg. Machine dimensions: approx. 3150mm/3750mm/2150mm, weight: approx. 3600kg. Documentation available. On-site inspection possible.

Offer 25366 Specifications: - Drilling capacity 25 mm - Drilling spindle holder MK 3 - Drilling spindle speeds 100 / 205 / 345 / 440 rpm - 695 / 885 / 1450 / 2900 rpm - Drilling spindle stroke 130 mm - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis 415 mm - Y-axis 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space requirement approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vise

Machine name: Horizontal Machining Center Manufacturer: Hüller Hille Model: NBH 230 Machine number: A.1003260.01 Year of construction: 2009 Condition: used Functionality: Fully functional Price & Location Location: Mielec, Poland Poland Offer details Listing ID: A19275746 Reference: 60 Update: last on 02.06.2025 Description Machine designation machining center Manufacturer: Hueller Hille Model No.: NBH230 Year of construction 2009 Serial number A.1003260.01 Control system Sinumerik 840D Travel X-axis 1200 Y-axis 800 Z-Axis 1200 Tool holder HSK100 Spindle speed 10000 rpm Feed rate (X-Y-Z axis) 1-60000 mm/min Rapid traverse (X-Y-Z axis) 60m/min Rapid traverse (B-axis) 15 rpm Tool pallet 630x800mm NC rotary table 0.001 grd Cebmlewpi Ucsb Saljri Tool magazine 3 cassettes of 50 tools each Direct displacement measuring system with incr ...

Stama MC531 Nr.5311119 BJ. 1999 Spindle revolutions 1/min 1050 SK40 Travel ranges mm X 800 Y 400 Z 355 Number of tools Tool diameter mm Tool length mm Max. tool weight kg B Axis NC Power kVA 53 Control system Sinumerik 840D

Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Serial Number: 6171067 Year of Make: 1986 Control: Sinumerik System 8. Spindle speed: 25-4000 rpm. Tool holder: SK40 Travel X: 630 Y: 500 Z: 550 Optical measuring system in axes X, Y, Z Axis B Mode NC 2 pallets table surface: 400x400. Interchangeable pallet system Tool magazines: 2x with 24 tools each Max tool diameter: 110mm. Max tool length: 320mm. Max tool weight: 15kg. Power supply: 380V 50Hz 36kVA.

Hiller Hille nbh110 SN 15642 Year of manufacture 1999 Spindle SK40 12000 1/min X 630mm Y 630mm Z 600mm Max. feed speed 7500mm/min Tools 36pcs Tool diameter 150/340mm (with free adjacent slots), Tool length 270mm Number of pallets 4 Pallet dimensions 400x500 Max. pallet load 600kg Axis B NC NC control Sinumerik 840D Power 69kVA

Ashine: TC800 Serial Number: 25133 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW.

x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine: TC800 Serial Number: 25132 Year of Make: 1986 Control: Sinumerik System 8. Tool holder: SK50 Travel X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallets table area: 800x800 Interchangeable pallet system Tool magazines: 60 tools Power supply: 380V 50Hz 55kW. Legal information

Machine Hueller Hille Nbh 70 Serial number: 6161034.1 Year of Make: 1985 Control: Sinumerik 810 Spindle speed: 25-6000 rpm. Tool holder: SK40 Travel: X: 630 Y: 500 Z: 550 Optical measuring system in axes X, Y, Z Axis B can be rotated 1 degree each. 2 pallets table surface: 400x400. Interchangeable pallet system Tool magazines: 2x with 24 tools each Max tool diameter: 110mm. Max tool length: 320mm. Max tool weight: 15kg. Power supply: 380V 50Hz 36kVA.

Stama MC325 106 BJ1997 SN KMM3251165 Main spindle SK40 Feed speed X-Y-Z axis 1-10000mm/min Rapid traverse speed X 40000mm/min Y 45000mm/min Z 45000mm/min Tool magazine Tool diameter max 88mm Tool diameter with free neber places 100mm Tool length max 220mm Tool weight max 10kg Number of magazine slots 36 Times Chip-to-chip 2.8s Workpiece change time of pendulum table 2.8s Connection value of the compl. System 28kVA Compressed air system Supply pressure min 6bar

Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.

Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.

A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.

x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm table surface area: 1000 x 543 mm spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min table load: max. 350 kg control: HEIDENHAIN MillPlus milling-head swivable +/-: 90 ° total power requirement: 26 kVA weight of the machine ca.: 4,2 t dimensions of machine L x W x H: 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine from Reckermann: TYPE: DELTA1300 K X(Longitudinal)/Y(Transverse)/Z(Vertical): 1500x 500x 450 mm Tool holder DIN 2080: SK50 Works flawlessly

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cross rung milling machine Make Stegherr Type KSF 2/4 with milling cutters Suitable for milling cross bar joints on e.g. windows, doors and furniture equipped with 3 milling units one upper and one lower milling unit each mill the two mitre-like recesses in unison and a third aggregate at the same time the plating The machine table is moved pneumatically-hydraulically. The forward and return speed is adjustable. With foot control 2 motors each approx. 2.2 kW Connected load approx. 4.5 kW Pressure 6 bar Voltage 380 V 50 Hz Suction nozzle diameter 180 mm

x-travel: 820/850 mm y-travel: 300/330 mm z-travel: 485/505 mm weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1670 x 1620 x 2500 m Further techniscal detals please consider pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine Deckel FP4 NC BJ 1987 Specifications •Travel: o X-axis: 560 mm o Y-axis: 500 mm o Z-axis: 410 mm • Includes tool cabinet and various tools (see photo)

Continuous ball mill with 1.7 m Ø and 8.0 m length, with steel lining, steel balls and drive unit (AEA motor 260 kW / 400 V and Flender gearbox). Previous use: Fine grinding of sand with a throughput of 6 tons/h (at 26 RPM). In regularly serviced condition. Available for an extra charge: Factory overhauled replacement gearbox. There are 2 identical mills available.