mill cnc used for sale

General SKU360U945 LocationBarneveld MakeMillipor Ultra Filtration No.F0PA48268 Year of construction2011 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelsSkid Total height2,85 m CEcheck Floor space1,98x1,25 m Extra SpecificationsTank volume 261 ltr, fluid steam, working pressure -1/3 bar, test pressure 5,5 bar, work temp 135°C, with Wright flow  :pump, type SLBS/0081, 0,75 kW, 15 bar, Waukesha pump unit, type SLEL/1099, 5,5 kW, 10 bar, Millipor filter elements, type CUF01, Endress+Hauser flow valves Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU360U950 LocationBarneveld MakeMillipor Ultra Filtration TypeRVT0 No.15843 Year of construction1998 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Vacuumcheck Specified Features - Miscellaneous filter MaterialStainless steel 1.4401 (316) Filtercheck Information Mounted on wheelsSkid CEcheck Floor space2,075x1,250 m Total height2,860 m Extra SpecificationsTank volume 250 ltr, fluid steam, working pressure 2 bar, design pressure -1/3 bar, test pressure 4,2 bar, design temp 135°C, with Waukesha pump, type 006U2, 0,55 kW, Waukesha pump unit, type 060U2, 5,5 kW, Millipor filter elements, type CUF01, Endress+Hauser flow valves, Gemo valves, 2-doors control cabinet with B&:R touchscreen controlMiscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At ...

General SKU237S132 LocationBarneveld MakeMillipore Process system (Fr) TypePSKUF 20/4/3 No.MSP007665 Year of construction2004 Pressure Working pressure0.45 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Specified Features - Miscellaneous filter Max. temperature-10-110 degr. C With stirrermagnetic stirrer Miscellaneous filters MaterialStainless steel 1.4404 (316L) Filtercheck Filter surface20 m² Information Mounted on framecheck With switchgear(as is) Total height2,7 M Weight1550 Kg CEcheck Floorspace2,0x1,9 M Extra SpecificationsThe process boiler has a gross volume of 200 liters. (nett. 160 ltr.) The filter plates are not mounted. the type of plate that has been in this device is the Prostak PLAC 1kD consisting of 12 elements with a total filter surface of 20.4 m2 Miscellaneous filters ...

General SKU293X395 LocationBarneveld MakeMerck Millipore TypeMobius Pod Cart 2 levels No.F0BN35875POD Year of construction2020 Pressure Working pressure3.4 Bar Main Features MaterialStainless steel Pressure124 Bar Surface1.1 m2 Specified Features - Filterpress Filter presscheck Filter surface5x 0,55 m², 1x 1,1 m² Internal platen sizes470x260 mm External platen sizes550x310 mm Central inlet300 mm Manual operated closing2x Enerpac Manual openingcheck MaterialStainless steel 1.4301 (304) Information Mounted on wheelscheck CEcheck Floorspace1,70x0,80 m Total height1,17 m Extra SpecificationsMax inlet pressure 3,4 bar for :ultra filtration FilterpressesMerckFilters > FilterpressesBrand > Merck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU293X468 LocationBarneveld MakeMillipore TypeQuick Scale No.QS100-1432 Year of construction2022 Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter MaterialGlass, Stainless steel 1.4552 Filtercheck Information Mounted on wheelscheck Total height1,75 m Weight34,1 kg Floor space0,55x0,55 m Extra SpecificationsVolume 4,3 l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1, with pressure gauge. Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X470 LocationBarneveld MakeMillipore TypeQuick Scale No.QS100-1426 Year of construction2021 Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter MaterialGlass, Stainless steel 1.4552 Filtercheck Information Mounted on wheelscheck Total height1,75 m Weight34,1 kg Floor space0,55x0,55 m Extra SpecificationsVolume 4,3 l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1, with pressure gauge. Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X471 LocationBarneveld MakeMillipore TypeQuick Scale No.QS100-1427 Year of construction2021 Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter MaterialGlass, Stainless steel 1.4552 Filtercheck Information Mounted on wheelscheck Total height1,75 m Weight34,1 kg Floor space0,55x0,55 m Extra SpecificationsVolume 4,24 l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1, : with pressure gauge. Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X472 LocationBarneveld MakeMillipore TypeQuick Scale No.QS70-0046 Year of construction2005 Main Features MaterialStainless steel/Plastic Specified Features - Miscellaneous filter MaterialPlexiglass/acrylic glass, Stainless steel 1.4552 Filtercheck Information Mounted on wheelscheck Total height1,80 m Weight60 kg CEcheck Floor space0,55x0,55 m Extra SpecificationsVolume 4,1 l, pressure 7 bar, allowable temperature +2°C/+30°CMiscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU293X469 LocationBarneveld MakeMillipore TypeQuick Scale No.QS100-1402 Year of construction2021 Main Features MaterialStainless steel/Glass Specified Features - Miscellaneous filter MaterialGlass, Stainless steel 1.4552 Filtercheck Information Mounted on wheelscheck Total height1,75 m Weight39,2 kg Floor space0,55x0,55 m Extra SpecificationsVolume 4,32l., pressure 7 bar, test pressure 7 bar, allowable temperature +2°C/+30°C, category 4.3, group 1, with pressure gauge. Miscellaneous filtersMilliporeFilters > Miscellaneous filtersBrand > Millipore What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

GENERAL Project No.: 905817 Quantity: 1 pcs. Manufacturer: DMG MORI Type: MillTap 700 Control: Siemens 840 D solutionline Year of Make: 2020 Condition: Used machine Approx. (hrs): 8038 Spindle Approx (hrs): 1166 Program run approx. (hours): 1389 DESCRIPTION MILLING Travel in X 700 mm Travel in Y 420 mm Travel in Z 380 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. acceleration in X/Y/Z 10/10/18 m/s2 Direct displacement measurement system X/Y/Z Tool holder BT 30 Max. speed milling spindle 24000 1/min Max. power at ED 10-40/100% 16.3/6 kW Max torque at ED 10-40/100% 48/30 (78 max) Nm Disc tool magazine 25 stations Chip to chip time 1.7 s Machine table 840x420 mm OTHER EQUIPMENT IR Workpiece Probes Tool measurement by means of a probe Splash protection cladding with fully encapsulated working area Oil/Emulsion Mist Extraction System  ...

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This MILLUTENSIL MIL163 hydraulic press was manufactured in 2003. Ideal for various pressing applications, it offers robust performance and reliability. Consider the opportunity to buy this MILLUTENSIL MIL163 hydraulic press. Contact us for more information.

This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information.

This 3-axis MILLTRONICS VM24 vertical machining center was manufactured in 2001. It features a table size of 610 x 1140 mm, X/Y/Z travel of 1016/610/610 mm, and a spindle motor with 7.5/11 kW power. The machine supports a maximum workpiece weight of 900 kg and includes a 20-station tool changer. Ideal for detailed machining tasks. Contact us for more information about this machine.

This 3-axis +GF+ MIKRON MILL S 500 was manufactured in 2017. It features a stroke of 600mm x 450mm x 360mm, spindle speed up to 42,000 rpm, and a worktable size of 590x450mm. It supports a maximum workpiece weight of 200kg. Ideal for detailed and precise machining tasks. Contact us for more information.

This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine.

This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information.

- Cut off 452 mm - Web width 660 mm - 5 I units ( one unit incomplete ), works 4 4 - Folding till A5 - Gas dryer VITS - Control panel - machine still in production

This 4-axis CHIRON Mill 2000 High Dynamics was manufactured in 2018. It features a single-spindle head, HSK-A 63 tool holder, and a maximum spindle speed of 20,000 rpm. The machine offers X-axis travel of 2000 mm, Y-axis travel of 630 mm, and Z-axis travel of 550 mm, with rapid traverse speeds of 75 m/min. Consider the opportunity to buy this CHIRON Mill 2000 High Dynamics vertical machining centre. Contact us for more information about this machine.

This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details.

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

This 4-axis +GF+ Mikron Mill E 1200 was manufactured in 2021. It features a spindle speed of 20,000 rpm, HSK A63 tool magazine, and rapid traverses up to 40 m/min. The work table measures 1450 x 600 mm with a maximum load of 1500 kg. Additional features include a Lehmann 4-axis rotary table and a liftable chip conveyor. Consider the opportunity to buy this +GF+ Mikron Mill E 1200 vertical machining centre. Contact us for more information.

This 3-axis EMCO MILL E350 was manufactured in 2019, featuring advanced Siemens control for precise operations. Ideal for complex milling tasks, this vertical machining center ensures reliable performance. Consider the opportunity to buy this EMCO MILL E350 vertical machining center. Contact us for more information.

This 5-axis MORI SEIKI ZV 400 SUPER MILLER was manufactured in 2005. It features an X-axis travel of 600 mm, Y-axis travel of 425 mm, and Z-axis travel of 450 mm. The machine includes a table diameter of Ø 350 mm and a maximum workpiece weight of 200 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI ZV 400 SUPER MILLER vertical machining centre we have for sale. Contact us for further details.

General SKU219Y070 MakeRetsch Haan Serial63363 Magento base g_extra_specifications220Watt 3x 220/50hz Specified Features - Roll breaker MaterialStainless steel Roll breakercheck Rotor sizesø 130 x 215 mm Teeth height20 mm Inlet65 x 35 mm Outletø 40 mm Motor2,2 kW (380 V, 2870 rpm) With variable speed drivecheck Rotor speed2870 rpm Information TypeTM 1 Year of construction1997 Mounted on framecheck LocationBarneveld With switchcheck Floorspace0,75 x 0,70 m Total height1,40 m Weight150 kg Extra Specifications With an additional roll a head that moves 0–60° and a timer Roll breakersRetsch HaanBreakers > Roll breakersBrand > Retsch Haan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...

Key data: 150 t

For sale is a used hydraulic spotting press Millutensil MIL 163 from 2004 with a pressing force of 150 t. The 4-column press has a table size of 1,300 × 1,600 mm, a maximum installation height of 1,300 mm and a column spacing of 1,700 × 1,370 mm and is particularly suitable for spotting, try-out and tuning work in tool and mould making. Technical data + information: Spotting press – Millutensil MIL 163 – 150 T Allgemeine Disclosures - Manufacturer: Millutensil - Model: MIL 163 - Year of construction: 2004 - Type: 4-column spotting press - Press force: 150 T (adjustable) - Column spacing: 1,700 × 1,370 mm - Table size: 1,300 × 1,600 mm - Max. installation height: 1,300 mm - Table height from the ground: 610 mm - Overall dimensions (WxDxH): approx. 2,000 × 2,550 × 4,600 mm - Total weight: approx. 19,000 kg - T-slots: DIN 650 / 22 Werkzeugbelastung - Max.  ...

COMPLETE LOT SPECIFICATIONS - 2x Fanuc R2000iB 165F industrial robots with RJ3iC controllers - 2x Gudel 8 metre linear tracks with bellows fully integrated - 2x HSD 8kW automatic tool change spindles, Year 2022.Inverters, cables, and full integration included Find more here - / Contact us at -

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

General SKU256K252 LocationBarneveld Material Housing materialStainless steel Disc materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor15 KW Inlet diameter180 mm Specified Features - Colloid mill GrinderPerforated disc mill (1x) Rotor sizedia. 180mm House jacketedcheck Inletdia. 25mm Motor15,0 KW, 220/380 Volt (Ex) Speed2925 Rpm Colloid mills MaterialStainless steel Information Makeunknown, manufacturer tag is missing Floorspace1,1x0,4 M Total height0,5 M Weight260 KG ATEX compatiblecheck Extra SpecificationsDisc is perforatedColloid mills-Mills > Colloid millsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill MaterialStainless steel 2.4602 (Hastelloy C-22) Hammer Mills Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Information Floor space1,7x0,7 m Total height1,2 m Weight800 KgDiscountHammer MillsEngelsmannDiscountMills > Hammer MillsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU027E101 MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Mounted on framecheck Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) Hammer Mills Hammer millComminuting mill (1x) Rotor sizedia. 260x295mm Fixed hammerscheck With sieve cagecheck Inlet/feeding through twin screw metering screw Motor22,0/30,0 KW, 380/660 Volt, 1470rpm Speed750rpm Information LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace2,0x1,3 M Floor space2,0x1,3 m Total height2,4 M Weight900 KG Extra SpecificationsDosing screw Motor 0.55 kW Gearbox output 5.7 - 34 rpm (manual variator) Dosing screw capacity: maximum 4.5 m3/h Sieve cages: 3 pieces ( 2 x pore size 1.25 mm: 1 x 1.75 mm) DiscountHammer MillsApexDiscountM ...

Millipore Milliflex PLUS MXP PUMP 03 Model: MXP PLUS 03 With 3 microwire adapters 3 Filtration Pumps (Milliflex Plus) 3 x 24 W

General SKU094Y627 MakePUC Probst & Class TypeK-180 EL No.88004 Year of constructionunknown LocationBarneveld Motor Motor power30 kiloWatt Main Features MaterialStainless steel Motor30 KW Inlet diameter25 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesø 180 mm Cross teethed rotorcheck With jacketcheck Inlet4x ø 25 mm Outletø 60 mm Motor25,0/30,0 kW (380 V, 2960 rpm (Ex)) Speed1475/2960 Rpm Information Floorspace1,7 x 0,7 m Total height0,7 m Weight650 kg ATEX compatiblecheckDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU056U362 MakePUC Probst & Class TypeK-100 No.91079 Year of construction1991 LocationBarneveld Material Rotor materialStainless steel Main Features MaterialStainless steel Motor5.5 KW Inlet diameter50 mm Specified Features - Colloid mill MaterialStainless steel Colloid mill in line(1x) Rotor sizesø 100 mm Teethed rotorcheck Without hoppercheck InletDN50 OutletDN50 Motor5,5 kW (400 V, 2905 rpm (Ex)) Speed2905 rpm Information Mounted on wheelscheck With switchcheck Floorspace0,9 x 0,6 m Total height1,3 m Weight125 kg ATEX compatiblecheckDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherland ...

General SKU002Y164 MakePUC Probst & Class TypeN-100E No.74099 LocationBarneveld Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor4 KW Inlet diameter50 mm Specified Features - Colloid mill Colloid mill in line(1x) Rotor sizesø 100mm Cross teethed rotorcheck Motor4,0 kW, (380 V, 2880 rpm) With variable speed drive(frequency converter) Speed100- 2880 rpm MaterialStainless steel Information Mounted on wheelscheck With switchcheck Floorspace1,7 x 0,7 m Total height1,1 m Weight300 kgDiscountColloid millsPuc Probst & ClasDiscountMills > Colloid millsBrand > Puc Probst & Clas What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Ple ...

Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data Capacity: approx. 2,500 bottles per hour Labelling technology: Pressure-sensitive (self-adhesive) Number of stations: 3 Applications Front label Back label Seal label Bottle Formats Container type: Glass bottles S ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines : LxBxH ca. 3070 x 1800 x  ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and outstanding design features of the RaptorX-SL with steel substructure / gantry design RaptorX-SL1200/S20 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special size (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! To such a way that you are able to process plate materials with the greatest stability of the Z-axis exactly as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or water jet cutting system, are available In the middle range of the machine (between the foottubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm height ( at 400mm long F ...

Important and outstanding design features of the RaptorX-SL with steel substructure /RaptorX-SL3200/S15 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the high-adjustable working area (read-through he under bridge variable : 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (without extra charge) extremely large. special coarseness up to 17,500 mm (on one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-coerpers. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm hei ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...