mill cnc used for sale

Good working condition Auction-ID: A1-47365-122

Auction-ID: A7-50851-47

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,56 x 2,56 x 1,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A1-50226-9

Auction-ID: A1-50750-12

This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details.

more details see photos Auction-ID: A7-50868-107

GeneralUniversal machining centre; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal1000 mmCross1250 mmVertical1000 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 1000 x 800 mmCentre bore 50H6 mmMaximum load (table centre) 2000 KgSlot width 18 mmNumber of Slots 7 Distance between T-Slots 100 mmRotation speed max.4. Axis 35 rpm4. Axes (swivelling range) 360 x 0,001 degreeCabineFull protection cabin Uni. head with controlled B-axisUniversal milling head with c ...

General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® 0i-F Plus on Fanuc Touch CNC Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range - 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40 ...

Table clamping surface: 440 x 1200 mm Table movement x: 950 mm Table movement y: 250 mm Table movement z: 475 mm Spindle holder: ISA 40 Spindle speeds: 40 - 1800 rpm Feeds longitudinal and transverse: 16 - 6630 mm/min Feeds vertical: 5.6 - 224 mm/min electr. Connection: 380 V, 7.5 kVA Space requirement: 2100 x 2000 x 2150 mm Weight: 2400 kg

x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t

x-travel:2700 mm y-travel:1000 mm z-travel:1050 mm T-slots:7x22 feed speeds:10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min

x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm

x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader

x-travel:560 mm y-travel:500 mm z-travel:450 mm

x-travel:560 mm y-travel:500 mm z-travel:450 mm

x-travel:1270 mm y-travel:460 mm z-travel:660 mm Machine hours: 58,355 Spindle speed: 8,000 rpm

Boring power:10 mm weight:590 kg connected load:2 kW dimensions::1500 x 1300 x 2300 mm

x-travel:100 mm y-travel:100 mm z-travel:100 mm total power requirement:0,6 kW weight of the machine ca.:130 kg dimensions of the machine ca.:1600 x 1000 x 1300 mm milling depth:0-50 mm

x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm

x-travel:1120 mm y-travel:370 mm z-travel:410 mm total power requirement:14,5 kW weight of the machine ca.:3850 kg dimensions of the machine ca.:3,5 x 3,5 x 2,2 m Table dimensions:400 x 1600 mm spindle taper ISO:50

x-travel:1120 mm y-travel:345 mm z-travel:400 mm total power requirement:14,5 kW weight of the machine ca.:3,85 t dimensions of the machine ca.:3.500 x 2.920 x 2.710 mm table-size:1600 x 400 mm spindle taper:SK 50

x-travel: 2000 mm y-travel: 800 mm z-travel: 800 mm Control: Haidenhain 426 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:850 mm y-travel:630 mm z-travel:500 mm spindle taper ISO:40 milling head speed:25 - 4200 U/min table surface area:560 x 1200 mm total power requirement:15 kW weight of the machine ca.:4 t dimensions of the machine ca.:4,3 x 4,4 x 2,3 m with CNC HEIDENHAIN TNC 415

This 3-axis HAAS GR-712 was manufactured in 2010. It features an impressive X-axis travel of 3,683 mm and Y-axis travel of 2,159 mm, providing a robust working area with table dimensions of 3,658 x 1,829 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and an ATC capacity of 20 stations. If you are looking to get high-quality milling capabilities, consider the HAAS GR-712 gantry milling machine we have for sale. Contact us for further details.

Refurbished lid FP 1 for sale. - 3-axis digital display - Cooling/lubrication pump in the machine base - Overhauled 2024 - Incl. tool table and machine vice If you have any questions, please: 01728101136

This 3-axis HAAS GR-510 gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 3,073 mm and Y-axis travel of 1,549 mm, with a robust table size of 3,099 x 1,346 mm. The machine has a maximum weight capacity of 2,722 kg on the table. If you are looking to get high-quality milling capabilities, consider the HAAS GR-510 machine we have for sale. Contact us for further details.

Key data: 5000 mm, 275 mm, 310 mm

Urban AP 5000 F - Travelling column milling machine - Heidenhain track control TNC 410 M, control panel can be moved over the entire processing length - Robust basic construction as a welded frame construction - Ball rail guides on all axes - Milling spindle unit: 80 - 6000 rpm, tool holder SK30 - X-axis with rack and pinion drive (30 m/min) - Y/Z axis with ball screw (20 m/min) - 2 chip drawers - Swivelling clamping device for 4700 mm workpiece length - 10 Pneumatic workpiece clamps - Manually operated central lubrication - Moving disc tool changer for 8 tools - Micro-Spray - Cooling emulsion pump - Machine light - Safety bumper - Machine guard pneumatically vertical opening - Year of construction 2005 - Control on: 26910h - Program run: 9185h - Spindle on: 6557h Defects: - Air hoses of the tensioners have to be partially replaced - Contact cables of the cylin ...

x-travel: 300 mm y-travel: 150 mm z-travel: 355 mm spindle turning speed range: 58-2000 U/min table-size: 700x250 mm dimensions of the machine ca.: 1300 x 1100 x 1700 mmxmmxmm weight of the machine ca.: 0.85 t misc. accessories: Digital read-out 3 axes www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1120 mm, 345 mm, 550 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing

Key data: 1400 mm, 630 mm, 500 mm

Table size 1800 x 630 mm Speed range 56 - 2800 1/min Tool holder ISO 50 Travel X / Y / Z 1400 / 630 / 500 mm Feed range X, Y 10 - 2000 (Z 2.5 - 500 ) mm/min infinitely variable Main motor 15 kW, connected load approx. 20 kW Incl. Universal milling head IUG 32A swivel 360° horizontal milling spindle Rapid traverse, automatic cycle Digital display Heidenhain ND 750 Coolant Setup Work area cladding hydraulic tool clamping CE Declaration of Conformity

: Viele MK Aufnahmen taper MK: 40 taper MK: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 2-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

Skjold hammer mill with 7.5 kw, Sieve ø 515 x 70 mm Perforation ø 2 mm 12 bats, Inlet ø 80 mm, outlet ø100/90 Operation with extraction required We offer overhaul and reconditioning in our specialist workshop according to customer requirements!

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 3-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

for sale are partially overhauled milling machines of the type Deckel FP1 aktiv. Thanks to the 3-axis TNC113 active control, the machine can convince with very simple and comfortable handling. This newer version from 1989 has, among other things, a central lubrication, an electric coolant pump and a machine lamp. The machines are extensively partially overhauled in our workshop and are therefore in excellent condition. You are welcome to convince yourself of this on site. Shipping time: immediately Year of construction: 1989-1992 Machine no. 2102-xxxx Table: rigid angle table Travel: X300mm/Y160mm/Z340mm Quill Stroke: 60mm Connected load: 1.9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min

Milling machine - Universal Make: AVIA Type: FND 25 Year of construction: 1984 Control type: conventional Country of origin: Poland Delivery period: right away Technical details x-way: 400 mm y-way: 360 mm z-Way: 400 mm Mounting table: 800x400 mm Tool holder: SK40 Quill Hub: 100 mm Speed: 40...2000 rpm Total power requirement: 4.5 kW Machine weight approx.: approx. 2.4 t Space requirements approx.: L:1.6xW:1.3xH:2.0 m

Feed length X-axis: 500 mm Y-axis feed length: 300 mm Feed length Z-axis: 380 mm X-axis travel: 500 mm Y-axis travel: 300 mm Travel Z-axis: 380 mm X-axis feed speed: 500 mm/min Y-axis feed speed: 500 mm/min Z-axis feed speed: 500 mm/min Speed (max.): 2,000 rpm Speed (min.): 40 rpm Weight: 1,250 kg Equipment: Documentation/Manual

Specifications: 3-axis digital display Heidenhain active Working area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle holder SK 40 Speed range n 50-2500 min-1 Feeds 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rollers - roller diameter: 400 mm - roll length: 1000 mm - Rolls: with core bore, with central chamber for water cooling - Fixed friction between the rollers - Rollers mounted on bronze bushes with circulating oil lubrication via pump, - equipped with new Johnson-Fluiten slewing rings, for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit: NEW - Manually tiltable steel guide plates with mechanical safety lock with mechanical safety interlock - Stainless steel roller container for holding the mixture - bi-directional safety belly bars - Safety brake for NOT stop - ...

Universal milling machine Hermle UWF 802M with Heidenhain TNC124 track control in super CONDITION Specifications: Year of construction approx. 1996 Rigid angle table Speed: 17 to 3550 rpm Infinitely variable feed in 3 axes from 0 to 1600 mm/min Drive Power .:6 KW Travel X/Y/Z: 500/430/400 mm Vertical Quill and Horizontal Quill - SK40 Hydraulic tightening system Weight approx. 2000 Kg Dimensions Length 1.8 m , Width 1.8 m , Height 1.9 m Accessories and equipment: >> Heidenhain TNC124 Track Control >> Hydraulic clamping vertically and horizontally >> Automatic central lubrication >> spindle brake >> operating instructions About the machine : A Hermle UWF 802M tool milling machine with Heidenhain TNC 124 route control is offered. This universal milling machine is in very good condition. A very easy-to-use route control. Lengths and radius corrections are possib ...

Key data: 13750 mm, 5000 mm, 1000 mm

Ingersoll MasterHead 5-Axis CNC Planer Mill Model : MasterHead Age : 2016 SERIAL NO.: 28806 (27-01) FEATURES: FANUC 31I 5-AXIS NEW 2016 DOUBLE HOUSING ADJUSTABLE RAIL AUTOMATIC TOOL CHANGER AUTOMATIC ATTACHMENT CHANGER 2-AXIS MILLING HEAD ATTACHMENT 5-SPINDLE UNITS TRAVELS: X-AXIS, TABLE TRAVEL 541.1" (13750mm) Y-AXIS, HORIZONTAL HEAD TRAVEL 196.85" (5000mm) Z-AXIS, RAM STROKE 39.37" (1000mm) W-AXIS, VERTICAL TRAVEL OF CROSS RAIL 98.42" (2500mm) A-AXIS, HEAD ROTATION, 360 DEGREE 360,000 POSITIONS B-AXIS, HEAD SWIVEL, 180 DEGREE 360,000 POSITIONS SPECIFICATIONS: TABLE SIZE, JOINED 137.79" X 509.4" (3500 x 12940mm) TABLE SIZE, UN-COUPLED FRONT 137.79" X 255.5" TABLE SIZE, UN-COUPLED BACK 137.79" X 253.9" DISTANCE BETWEEN TABLE SECTIONS 39.37" DISTANCE BETWEEN COLUMNS 147" RAM CROSS SECTION 23.62" X 23.62" MAXIMUM HEIGHT TABLE TO RAM FACE 127.95"  ...

Machine like new from the laboratory x-travel 400 mm y-travel 320 mm z-travel 400 mm Control Heidenhain TNC124 Table size 650 x 350 mm Tool holder SK 40 Spindle speeds 0-4,000 rpm Quill stroke 60 mm Vertical head swivel 90 degrees Total power requirement 5.0 kW Machine weight approx. 1.3 t Space requirements approx. 2.00 x 2.00 x 2.00 m

Specifications: Digital 3-axis digital display HEIDENHEIN TNC 134 X-axis travel 500 mm Y-axis travel 350 mm Z-axis travel 380 mm Tool holder SK 40 vertical milling head with hydr. Tool Clamping DIN 2080 Ring Groove Table type Banquet table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories -Central lubrication - Coolant device -Operating instructions

Specifications: Travels X/Y/Z 400 x 400 x 375 mm Max. clamping area 350 x 800 mm Speed range (12) 50 - 2240 min-1 Feed, infinitely variable 1 - 630 mm/min Rapid traverse, max. 1.4 m/min Total connected load 4.7 kW Dimensions (LxWxH), approx. 1300 x 1215 x 1700 mm Weight with pallet, approx. 1700 kg Equipment: Digital Rigid angle table Coolant Setup