136,384 used machines on RESALE, but how to find them? Machine Search
used
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...
used
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmTorque (100% DC)1700 NmMax. torque (40% DC)2200 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...
power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis SPINNER TC800 110MCY was manufactured in 2016. It features a Siemens control system, operating at a voltage of 400 V and a frequency of 50/60 Hz. The machine has a full-load current of 63 A and a nominal current of 80 A. If you are looking to get high-quality turn-milling capabilities, consider the SPINNER TC800 110MCY machine we have for sale. Contact us for further details.
This 4-axis Hurco TMX8MYS was manufactured in 2014. It features a tool turret and includes a main spindle chuck, sub-spindle chuck, and parts catcher. With a robust design, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Hurco TMX8MYS turn-mill centre we have for sale. Contact us for further details.
This 3-axis DYE RHE -3000 Bed Type Milling Machine was manufactured in 2009. It features a substantial table surface of 1000 × 3000 mm, with longitudinal travel of 3000 mm and transverse travel of 1500 mm. The machine is equipped with a grinding wheel diameter of 450 × 80 mm and a spindle speed of 1450 rpm. If you are looking to get high-quality milling capabilities, consider the DYE RHE -3000 machine we have for sale. Contact us for further details.
Key data: 4700 mm, 6100 mm, 1470 mm
Portal milling machine with fixed portal and 2 separately movable machine tables for pendulum machining. The tables can be coupled to form a large table. Designed for the typical applications in model and mould making and in the machining of (small) series parts with high efficiency. In addition, the machine can be equipped with a zero-point clamping system for quick replacement of clamping fixtures or prepared parts. Areas of work: X-axis: 4,700 mm Y-axis: 6,100 mm Z-axis: 1,470 mm A-axis: ± 115° C-axis: ± 360° Control: OSAI Openkey 2-axis milling head with spindle: Spindle power: 15 kW Spindle speed: max. 24,000 min-1 Torque: 20.9 Nm Tool holder: HSK 63F Tool tensioning: pneumatic blowing air / MQQ: outside Clamping table: Clamping surface: 2 x 1,950 x 2,500 x 213 mm (coupled: 4,000 x 2,500 mm) Aluminium with grid threaded holes Max load: 1000 kg distributed over th ...
Fully functional Mikron Milling Machine Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw
milling machine, year 1997, CNC 426. Used machine. More info & price on IndustrialBuyer.
x-travel: 5.500 mm y-travel: 1.400 mm z-travel: 1.000 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 6.000 x 1.200 mm max. workpiece weight: 13.500 kg/m² Nc rotary table: - position: rechts, bündig integriert in Tischfläche surface area: Ø 1.000 mm positioning accuracy: 360 x 0,001 mm T-slot number x size: 12 x 22 Abstand 100 mm Universal Milling Head: _ Swiveling area front/back level: automatsich Indexing: 0,001 x 0,001° stepless Constant Power at 100 % ED: 28 kW Speed range, stepless: 15 - 5.000 min-1 max. torque: 815 Nm tool taper: SK 50 – DIN 69871 internal coolant system feed: durch das Spindelzentrum automatic tool changer ATC: - Tool places: 80 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 20 kg changing positions: vertikal /horizontal feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min rapid in X/Y/Z: 25.000 ...
Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning ...
table length: 4100 mm table width: 1050 mm table height: 1600 mm total power requirement: 29 kW weight of the machine ca.: 28000 t dimensions of the machine ca.: 11X5X3,8 m Marke Kiheung Maschinen-Nr F668 Typ KNC-U1000 CNC-Marke Heidenhain CNC-Typ TNC 426 Baujahr 2002 Tischlänge 4.100 mm Tischbreite 1.050 mm Maximale Tischbelastung 8.000 kg X 3.600 mm Y 1.250 mm Z 1.600 mm Aufnahme BT50 Schnell 10.000 m/min Geschwindigkeit 0 - 4.000 RPM Beweglicher Tisch Huron-Fräskopf CNC gesteuerter Fräskopf Späneförderer Maschinengröße (LxBxH) 11.000 x 5.000 x 3.800 mm Maschinengewicht 28000 kg Magazinplätze: 30 Spindelantriebsmotor: 29 Kw Ausgestattet mit 4. Achse. Tischdurchmesser: 630 mm Ø Belastung: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used and unchecked; viewing desired Auction-ID: A1-50737-88
x-travel: 700 mm y-travel: 800 mm z-travel: 800 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 5,2 x 3,8 x 3 m Brand Deckel Maho Machine no F630 Type DMC 70 H duo Block CNC Brand Siemens CNC Type Siemens 840D powerline Year of make 2006 Table length 500 mm Table width 500 mm Number of pallets 2 X 700 mm Y 800 mm Z 800 mm Spindle taper SK 40 Speed maximum 18.000 RPM Machine size 5.200 x 3.800 x 3.000 mm Machine weight 18.500 kg Tool magazine positions: 120 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.
MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
about 19500 meters Auction-ID: A1-50513-86
Key data: 102 mm, 1530 mm, 900 mm
Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,530 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: Digital readout
Car is in great condition and has all the documentation. Hardtop included Auction-ID: A3-46098-20752
Key data: 102 mm, 1600 mm, 900 mm
Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,520 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: 3-axis Digital readout with point to point control Heidenhain 310
Key data: 102 mm, 1600 mm, 1250 mm
Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 1,250 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm Table load 5 ton R.P.M. 4 – 1,250 (18x) kW 23 Volts 380 Cycles 50
Good working condition Auction-ID: A1-47365-122
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,56 x 2,56 x 1,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details.
more details see photos Auction-ID: A7-50868-107
used
GeneralUniversal machining centre; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal1000 mmCross1250 mmVertical1000 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 1000 x 800 mmCentre bore 50H6 mmMaximum load (table centre) 2000 KgSlot width 18 mmNumber of Slots 7 Distance between T-Slots 100 mmRotation speed max.4. Axis 35 rpm4. Axes (swivelling range) 360 x 0,001 degreeCabineFull protection cabin Uni. head with controlled B-axisUniversal milling head with c ...
used
Table clamping surface: 440 x 1200 mm Table movement x: 950 mm Table movement y: 250 mm Table movement z: 475 mm Spindle holder: ISA 40 Spindle speeds: 40 - 1800 rpm Feeds longitudinal and transverse: 16 - 6630 mm/min Feeds vertical: 5.6 - 224 mm/min electr. Connection: 380 V, 7.5 kVA Space requirement: 2100 x 2000 x 2150 mm Weight: 2400 kg
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoretic Chip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / ...
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® 0i-F Plus on Fanuc Touch CNC Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmSlide 1Longitudinal stroke755 mmTransverse stroke276 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range - 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)426 NmWork spindle (left)Spindle noseA2-8 Bar diametre80 mmSpindle diametre on front bearing130 mmMain drive 2Drive power (100% DC)13 kWDrive power (40% DC)14 kWSpeed range- 5000 rpmTorque (100% DC)171 NmMax. torque (40 ...
x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t
x-travel:2700 mm y-travel:1000 mm z-travel:1050 mm T-slots:7x22 feed speeds:10000 mm/min - Pallet Diameter : 3.300x1.000 mm - Max. Feedrate X/Y/Z: 10.000 mm/min
x-travel:1000 mm y-travel:320 mm z-travel:400 mm Table dimensions:1000 x 400 mm
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader
SPECIFICATIONS: Installed power: 6 kW Workpiece length: 1200 mm Pin width: max 100 mm Accessories: 1 soundproofing room 1 loader
maximum number of results exceeded
please refine your search
100 € 
