mill cnc used for sale

6 color size 800 mm<br><br><br>Still in operation: Yes<br>Available: immediately

Table size: 550 x 950 mm traverse path x/y/z: 850/550/550 mm spindle retainer: BT 40 ISA kl. / gr. Table/spindle distance: 100/650 mm spindle speed: 8000 rpm number of tool stations: 24 pièces feeds: x/y 5-10000 / z 5-12000 mm / min rapid traverse: x/y 24 / z 20 m / min spindle drive: 11/15 kW Electr. Supply: 400 V, approx. 20 kVA kW space requirement: 2600 x 2220 x 2700 mm weight: 5200 kg

5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4)

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Ideal for passage driving with consistent efficiency and for achieving the narrowest grain size distributions in the micrometer range, Maximum operational safety: even the basic version is designed in accordance with the explosion protection directive for installation in ATEX Zone 1 (ExII 2 G cb IIB T3) Grinding media sizes from 0.5–2.5 mm diameter Ideal cooling properties: The forced routing of the cooling water in the outer jacket allows the processing of temperature-sensitive productsEasy handling – each DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Easy handling – any DYNO-MILL® KD can be dismantled in just a few simple steps Easy operation and adjustment of operating parameters Grinding tank: 5L Power : 12,5kW Voltage : 380V Weight : 450kg

MARCHESINI FILLING MACHINE, MODEL MI 200 D.I. Year of construction: 2011 Automatic double-channel linear filling machine for plastic tubes. A great choice for packaging cosmetic and pharmaceutical products. Usable in sterile environments. The customization allows for the maximum production flexibility. possibility of simultaneous installation of different closure systems (metal and hot air) multiple feeding options and adjustable format change via HMI OUTPUT up to 200 pieces/min PRODUCT RANGE Dosage range: 1 - 320 ml Tube height with cap: 50 - 250mm Tube diameter: 11 - 50mm ELECTRICAL CHARACTERISTICS Nominal voltage: 3x400v +N+PE Frequency: 500 Hz 6 kA 18 A OTHER CHARACTERISTICS Weight: 3800 kg

Control Siemens 828 D Travel X/Y/Z 850/550/550 mm Speed 8000 rpm Tool magazine for 24 tools BT40 Table size 950x550 mm

Qty. 1 Second-hand overhauled 4-Hi cold rolling mill Mfc.: SUECO (Member of IHI Group) Material of rolling Series 5000 & 6000 The rolling mill has been bought in 2023 and total overhauled. All revamped and painted of mill housing, coiler, gear box, roll chock, and backup rolls etc. Installed new electrical controls, hydraulic system, work rolls and other essential components. Please note that the new owner invested USD 2.1 Million in 2023. Strip width: 400 – 600 mm (650 mm) Thickness: 0.05 – 2.0 mm Rolling speed: 300 m/min. Gear type: 3.5:1 ID 508 mm OD 1500 mm Coil weight: 5000 kg Work roll dia.: 200 mm (200 – 180 mm) Length: 740 mm Back-up roll dia.: 650 mm (650 – 630 mm) Length: 720 mm Work roll drive Main mill drive power: 300 kW, 0-600/1800 RPM R/Tension reel power: 110 kW, 0-600/1800 RPM L/Tension reel power: 90 kW, 0-600/1800 RPM

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

Miller TR 104 2 colors with perfector. color Control panel(Pult), 75 mil, roller and cylinder are without damage

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):

Tagential Flow Filter System Manufacturer: Millipore Model Cogent M1 Year of construction 08/2019 Functionality: Tagential flow filtration for process development, scaling studies and small-scale production Capacity: processes volumes from 300 ml to over 100 L Cassette support: up to 5 Pellicon 2 or 3 cassettes, total membrane area up to several m² Control: automatic transmembrane pressure (TMP) and differential pressure control (DP); Control modes include constant DP and constant TMP Flow rate: Maximum 4.5 L/min at 5 bar gauge pressure Materials & Design: Stainless steel components designed for clean-in-place (CIP) and compatibility with high process temperatures User interface: intuitive, multilingual touchscreen Data processing: Data collection can be uploaded as CSV files Operating conditions: voltage 220-230 V, frequency 50/60 Hz, operating temperature range 4 °C to ...

Measuring probe, measuring probe, 3D probe, probe insert, measuring probe head, inductive displacement sensor, display unit, measuring indicator -Manufacturer: Mahr Feinprüf, millitron display unit -Type: 1222 -Quantity: 1x measuring probe available -Dimensions: 200/150/H260 mm -Weight: 3.5 kg

This 3-axis Okuma Millac 852 VII was manufactured in 2015. It features a robust table size of 2,200 × 850 mm and a maximum table load of 2,500 kg. The machine is equipped with a high-torque spindle motor of 18.5 kW and a rapid traverse of 20,000 mm/min. If you are looking to get high-quality machining capabilities, consider the Okuma Millac 852 VII vertical machining centre we have for sale. Contact us for further details.

This 3-axis KNUTH X-Mill 640 was manufactured in 2015. It features a travel of 640 mm on the X-axis, 400 mm on the Y-axis, and 500 mm on the Z-axis. The machine is equipped with a Siemens 828D control unit and a 16-fold double-arm tool changer. If you are looking to get high-quality machining capabilities, consider the KNUTH X-Mill 640 vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON MILL FX 1250 was manufactured in 2015. It has a mass of 9700 kg and operates at a voltage of 400 V with a full load current of 63 A. If you are looking to get high-quality machining capabilities, consider the CHIRON MILL FX 1250 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MU 70 ECO Mill was manufactured in 2015. It features a maximum spindle speed of 12,000 rpm and a robust integrated NC swivel rotary table. Weighing 7,800 kg, this machine is equipped with an external chip conveyor and a coolant/filtration tank unit. If you are looking to get high-quality machining capabilities, consider the DMG MU 70 ECO Mill vertical machining centre we have for sale. Contact us for further details.

This 5-axis CHIRON Mill 2000 was manufactured in 2010. It features a Siemens 840D NC control and a robust main spindle motor by Siemens. The machine has a total of 3,129,425 tool changes, showcasing its efficiency in production. If you are looking to get high-quality machining capabilities, consider the CHIRON Mill 2000 vertical machining centre we have for sale. Contact us for further details.

This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm.

This 3-axis DMG MORI MILLTAP 700 was manufactured in 2013. It features a spindle speed of 24,000 rpm and a travel distance of 700 mm in the X-axis, 420 mm in the Y-axis, and 380 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the DMG MORI MILLTAP 700 vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS Mini Mill was manufactured in 2024. It features an X-axis travel of 406 mm, Y-axis travel of 356 mm, and Z-axis travel of 381 mm. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill vertical machining centre we have for sale. Contact us for further details.

This 3-axis HAAS Super Mini Mill was manufactured in 2024. It features impressive travels of 406 mm in the X-axis, 356 mm in the Y-axis, and 381 mm in the Z-axis. The machine includes a robust table size of 914 x 305 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill vertical machining centre we have for sale. Contact us for further details.

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

An Aurora single-head pulverising mill, American made, offered as a complete powder-making line in excellent working order with its full dust extraction system. Pulverisers grind plastic pellets into a fine, free-flowing powder for rotational moulding and other polymer powder applications. The line includes the disc mill with feed hopper and vibratory feeder, an Eriez magnetic separator on the infeed, pneumatic transfer, cyclone and rotary valve discharge, Allen-Bradley PanelView controls with a full control cabinet, an access platform with handrails, and a jib crane with electric chain hoist (SWL 250kg) for disc changes. The dust extraction has external filter units with explosion relief venting in an ATEX-zoned installation, with full ducting and interconnecting pipework. Viewing is by appointment. Price on request.

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.’ � ...

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 500 mm, 550 mm

Specifications: Manufacturer: Chiron Type: Mill 2000 high speed Control: Heidenhain TNC 530 Year of Make: 2013 Travels: X 2,000, Y 500, Z 550 mm Working spindle Speed: 12,000 rpm Start table Dimensions L/W: 2,600 x 550 mm Table load: 1,000 kg Tool/movement Tool holder: SK40 Tool changer: 40-fold Measuring system: direct X/Y/Z Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Preparation FK7 Loading automatically "opening and closing" Tub flushing

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

General SKU120X675 MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Year of constructionunknown, Milling chamber made of glass Mounted on framecheck Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace0,9x0,6 M Total height1,5 M Weight175 KGStarchSand millsCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsVMA-GetzmannIndustries > Food & Feed > StarchMills > Sand millsIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries  ...

General SKU301W572 MakeWab Bachofen TypeKD15 No.740364 Year of construction1973 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt MaterialStainless steel 1.4435 (316L) General Floorspace0,75x1,00 m Total height1,60 m Weight590 kgStarchSand millsCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsWab BachofenIndustries > Food & Feed > StarchMills > Sand millsIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndus ...

General SKU379T1136 LocationBarneveld MakeDrais TypePML-V+H Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck MaterialCeramic, Stainless steel 1.4571 (316Ti) With jacketcheck General No.54 310 Year of construction1992 With switchcheck With switchgear(as is) Floorspace1,2x0,9 m Total height0,7 m Weight340 kg ATEX designedcheck Extra information the machine comes with many additional partsStarchSand millsCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsDraisIndustries > Food & Feed > StarchMills > Sand millsIndustries > Chemical > ...