milk tank used for sale

Brewhouse Tank Farm from 15hl / brew Craft Brewery Complete tank farm / cold block from the 15hl/brew craft brewery, made by Estonian Torsteel in years 2014 – 2016. Tanks are made of AISI 304 and they are insulated pressure tanks. All CCTs have two cooling zones on both sides of the tanks and one cooling zone in cone, BBT has two cooling circuits on side and yeast tank cooling zone is on side of the tank. Tanks are equipped with pressure safety valves, CIP bowl, zone specific temperature sensors, manholes, sampling taps, filling and emptying valves. Tank temperatures is automatically controlled from common control panels. The following tanks are available - CCT 14 x 3000 liters net, working pressure 1.5 - 3.0 bar - CCT 2 x 1500 liters net, working pressure 3 bars - BBT 1 x 3000 liters net, working pressure 1.5 bars - Yeast tank 1 x 300 liters,

USED 10000 LITRES STAINLESS STEEL 316 TANK WITH 18 M2 EXCHANGER REF.: C3315 Horizontal tank made of 316L stainless steel with a capacity of 10,000 liters. 2000x3500x10 mm shell 8 mm thick klöpper bottom In the top bottom shell there is a DN450 manhole, a connection to the DN500 column, two DN50 supply inlets, a DN40 safety valve, two pressure probes 1/2 "Gas, a DN25 nitrogen inlet At the bottom there is a DN80 outlet On the side there are 3 outputs for DN80 sight glasses and a DN25 temperature probe On one bottom there are two DN80 outputs and on the other bottom there is an exit with DN300 coil. On 4 legs. General characteristics: Material Stainless steel 316L Technical characteristics: Capacity 10.000 L Bottom type Klopper

Stainless steel container 5,000 litres, 2 chambers 50/50, 2 x lid, insulation, 2 x floor drain tap, 2 x 2,500 litres, Ca-abemssungen: length 2,900 mm, width 1,300 mm, height 1,600 mm Price ex works

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

16,830 litre RIEGER mash agitator tank with paddle agitator/agitator agitator, upright, V2A Properties: Volume 16830 L Manufacturer: RIEGER Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3002 mm Outer diameter 2700 mm Inner diameter 2500 mm Agitator Paddle Stirrer Vertical design Number of feet 4 on frame Last Use Food Year of construction 2016 Max. operating temperature 50 °C Max. density 1100 kg/m³ Tank topstock: Clapper bottom Crane eyelets Gearbox and engine Filling flange on the side Front dome with manhole with threaded nozzle DN50 Cylinder: Ladder hook at the top Manhole 440 x 340 mm oval Ladder hook under the manhole Paddle agitator Tank underbody: Cone base Clear drain with disc valve Window forward-drawn residual drain pipe with flange and ball valve 4  ...

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

16,830 litre RIEGER mash agitator tank with paddle agitator/agitator agitator, upright, V2A Properties: Volume 16830 L Manufacturer: RIEGER Material V2A (AISI 304) 1.4301 Surface marbled on the outside Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3002 mm Outer diameter 2700 mm Inner diameter 2500 mm Agitator Paddle Stirrer Vertical design Number of feet 4 on frame Last Use Food Year of construction 2016 Max. operating temperature 50 °C Max. density 1100 kg/m³ Tank topstock: Clapper bottom Crane eyelets Gearbox and engine Filling flange on the side Front dome with manhole with threaded nozzle DN50 Cylinder: Ladder hook at the top Manhole 440 x 340 mm oval Ladder hook under the manhole Paddle agitator Tank underbody: Cone base Clear drain with disc valve Window forward-drawn residual drain pipe with flange and ball valve 4  ...

- 2 pressure tanks with 61.1 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,500 mm, H: 4,200 mm. - 4 pressure tanks with 102.2 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,800 mm, H: 4,900 mm.

Description Cooling Tank

90,000 liter storage tank/ wine tank made of V2A, vertical with flat bottom Volume 90000 L Total height 9200 mm Cylinder height 9000 mm Diameter 3600 mm Material V2A (AISI 304) 1.4301 Vertical design Previous use: Wine storage Topsoil: 2 crane eyes Folding dome DN400 with welded-in threaded nozzle NW50 front Threaded socket NW50 in the middle Sprinkler ring made of stainless steel Cylinder: Manhole swivel 340 x 440 mm Threaded Connector NW50 for Clear Drain Threaded neck NW50 for agitator 2 sleeves 1" Subsoil: Flat bottom with approx. 3% slope to the outlet and upper flat bottom with slope for ventilation Outlet nozzle NW100 On square slab 365 x 365 m

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

10.000 liter fuel tank

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

2,500 liter storage tank made of V2A Properties: Volume 2500 L Material V2A (AISI 304) 1.4301 Total height 3000 mm Cylinder height 2000 mm Diameter 1350 mm Number of feet 3 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: Cone base 2 crane eyes CIP ball in the middle Threaded Sockets Sensor for level measurement Tank cylinder: Manhole 440 x 340 Sensor for level measurement CIP ball over manhole 2 x Threaded Socket DN 50 Filler neck DN 80 Subsoil: Cone base Sensor for level measurement forward-drawn residual drain pipe with disc valve DN 100 3 trumpet feet with domes, height adjustable with washers

Diesel tank - 1000 liters - Double-walled - As good as new condition - Completely cleaned - Stackable - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - To be able to give an exact freight price please send me a request with your zip code - - - - - Price: - 1.000,- € + 19 % VAT = 1.190 € - An invoice with VAT will be issued - Payment: Prepayment - - - - - Other: - Sale of used machines in the actual state to traders without warranty

6MT SS TANK CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)

Storage tank

To supply & deliver 6 units of 8MT s/steel Vertical Chemical Storage Tank Tank Material: Stainless Steel 304 6.0mm thk 1B plate Tank Cover Material: Stainless Steel 304 3.0mm thk 2B plate [2 Side] Tank size [Diameter]: 1700mm x 3500mm[H] with 150mm cone. Tank Support: 4 nos 80mm & 200mm x 650mm[H] SS275JR M/S Channel Tank Support Ring: a] 3 nos 50mm x 50mm x 5thk SS275JR M/S b] 2 nos dia of 2" SS304 ScH40 pipe c/w S/Steel 10k flanges c] 11 units Internal dia 12mm SS304 step ladder Drive system: 5.5HP x 415V IE3 4 Pole Flange Mounter Motor c/w TPG helical gear reducer with grease vertical mounting. Model: GVS-50-400-10S Torque 233NM Complete with direct drive stirrer system RPM: 145 1 set of 50mm x 100mm x 5thk SS275JR drive system frame. 1 set of 2" S/Steel 304 main drive shaft 2 sets S/Steel standard stirrer channel blade c/w bush 1 set of 2" S/Steel 304 top ...

Heating oil tank Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to EN 12285-2 standard, above ground, double-walled incl. officially recognized test certificate. Tank Environmental Protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The container is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling tube with TW closure (filling cap) and immersion tube, 1 bearing tube with dipstick and dipstick closure, 1 vent pipe with ventilation hood, 1 brand-new limit encoder with type approval (AIII)(new) 1 conductor Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, y ...

Fiorini Storage Tank 8000 Liters VKB 2.0 - 1000L 4" Buffer tank 8000 liters 2x125FL 8 bar Make: IVRP - Fiorini Type VKG – 8,000 – V – 2x125FL – 8 bar Special model Painted on the outside, black on the inside 20mm insulation 2x flange connections DN 125 3 threaded connections 1/2" PN 8 bar Tmax: +60°C Dimensions: Diameter mm 1840, height mm 3465 Weight kg approx. 252.7 (empty) Connection: 2x DN125 Product no.: G0300062000035 Year of construction 2023/24 Condition: Optical 1-2, Technically ok Stock Equipment, as good as new Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

10,000 litres of above-ground containers for water or plant processes

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

For sale are 5 high-quality pressure tanks from the manufacturer Gresser. The tanks are in very neat top condition. Here are the technical data for the pressure vessels: Pressure tank 1: Year of Make: 1997 Operating overpressure: 3.0 bar Test overpressure: 3.9 bar Diameter: 1,200 mm Clear height: 2,770 mm Overall height: 3,170 mm Total capacity: 2.691 Liter Weight: 370 kg Pressure tank 2 + 3: Year of Make: 1997 Operating overpressure: 3.0 bar Test overpressure: 3.9 bar Diameter: 1,200 mm Clear height: 3,770 mm Overall height: 4,170 mm Total capacity: 4.103 Liter Weight: 450 kg Pressure tank 4: Year of Make: 1997 Operating overpressure: 3.0 bar Test overpressure: 3.9 bar Diameter: 1,500 m Pressure tank 5: Year of Make: 1995 Operating overpressure: 3.0 bar Test overpressure: 3.9 bar Diameter: 1,800 mm Clear height: 3,750 mm Overall height: 4,150 mm  ...

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

The entire fermentation cellar of a brewery is being sold, consisting of four fermentation tanks, a flotation tank as well as 2 coolable yeast vats and a semi-automatic control system. All tanks as well as the peripherals are made of Gresser and therefore of very high quality. The tanks are in mint condition. Technical data: Manufacturer: Gresser Regensburg Year of Make: 2001 Material: V²A Equipment: 1 flotation tank – net capacity 55.0 hl 2 flat-conical fermentation tanks – usable capacity 110.0 hl 2 flat-conical fermentation tanks – net capacity 55.0 hl 2 upright yeast vats – total capacity 3.8 hl 1 control semi-automatic If you are interested or for further data, please inquire.

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

FIS stirred tank 500 liters Manufacturer unknown, boiler is double-walled and can be heated, in a good used and functional condition. The device runs on 400 volts, completely stainless steel, workshop tested, immediately ready for use, Dimensions W/D/H 130/9100170 cm more on request.

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

Diesel tank system - company filling station - consisting of: 1 x Storage container, 10.000 liter capacity, used 1 x fuel pump, type Eco 75, brand new Description container: according to DIN 6616-D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome cover, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is reprimed and painted on the outside. (RAL sound). L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex wo ...

Heating oil Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled incl. officially recognized test certificate. Tank environmental protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The tank is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage fluid(new) 1 filling tube with TW closure (filling cap) and dip tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII)(new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, you can also design your tank s ...

Immediately available, 40,000 litres Above-ground, double-walled tank diameter 2,500 mm Length approx. 8,000 mm approved for heating oil and diesel Year of construction 1990 with test certificate Tank can be prepared/painted Otherwise immediately available, with common equipment

5BBL /800L Working Capacity Fermenting Vessel - stainless steel. Specification: Vessel = T 160 FV Gross Capacity 6 Barrels 220 Gallons 1000 Litres Material Stainless Steel – Grade 316 (1.44040) Description: Vertical stainless steel vessel, dished top and dished base. Free standing on 3-legs with adjustable feet. Fitted on the shell with a stainless steel Jacket, this is a low pressure open system jacket. Insulated on the shell in 50mm mineral wool insulation. Clad on the shell in bright polished, riveted stainless steel. Fittings: 1 x Top Manway Dia. 400m 1 x 1” RJT Feed to Dia.64 180° up pattern Spray Ball 1 x 120mm Dia, Viewing Glass 1 x 1½ RJT outlet with butterfly valve 2 x 1” BSP Male Inlet / Outlet to Jacket 1 x Temp pocket This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at ...

Spray booth water stabilizer Specifications: Agitator Pump Filler neck Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 thickness 3mm More items - new and used - can be found in our shop! International shipping costs on request!

Metal diesel tank - approx. 500 litres capacity - with frame and hand pump - can be driven under by forklift - - - - - Dispatch: - A Germany-wide transport is possible for an extra charge - In order to be able to give an exact freight price please send me a request with your postal code - - - - - Price: - 850,- € + 19 % VAT = 1.011,50 € - An invoice with VAT is issued - Payment: Prepayment - - - - - Other: - Sale of used machinery in actual condition to traders without warranty

upper floor, steel tank with welded consoles and four domes, ideal as rainwater tank can be ordered with inlet and overflow on request with partition wall in the tank (13.5 m³ + 25 m³, total volume: 38.5 m³) Total volume: 38.5 m³ Dimensions: Ø 2.95 m × 6.40 m long Consoles are 30 cm high, so the total height is 3.25 m

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Steel tank with inner coating (epoxy resin) Can be used above or below ground Volume: 32 m³ Dimensions: Ø 2.50 m × 7.00 m long can be ordered on request with extinguishing water connections or as a rainwater tank with inlet and overflow

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph