135,352 used machines on RESALE, but how to find them? Machine Search
REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control
used
Siemens MAMMOMAT INSPIRATION, built in 2009 with detector from 2007 in very good technical and optical condition
Key data: 340 mm, 1000 mm
Machine Type: CNC Lathe Manufacturer: Okuma Type: LU15-M Year of Make: 2000 Control: OSP-U100L Country of origin: Japan Delivery time: in stock Long turning length-1000 mm Towable Tailstock – Automatic G152 Partial hollow clamping device The lathe is in very good condition. The basic and additional equipment makes it possible to process long turning lengths of up to 1000 mm with this used machine. Effective productions continue to be achieved thanks to the towable tailstock – automatic, the tool breakage/wear control, the partial hollow clamping device, the K-pump and the dialogue programming (IGF). An optimal machine for economical and reliable production. The machine is user-friendly and can be integrated into production immediately. Machinery Spindle motor VAC built 22/15 kW Long turning length – 1000 mm towable tailstock – automatic G152 3-jaw chuck Forka ...
Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving th ...
Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
KRONEN AS 4 APPLE PEELING, CORING AND CUTTING MACHINE Manufacturer: KRONEN Model: AS 4 Year: 2017 Serial no.: 175012 Multipurpose semiautomatic apple processing machine designed to peel, core and cut apples into segments and slices of different sizes (depending on the cutting accessories that are used). It is capable of processing up to 3 apples at the same time. Made of stainless steel Max. capacity: 600 apples/hour (approx. 90 kg/h) Apple size: Ø 55 - 85 mm Electrical data: 230 V/50 Hz/0.18 kW/1PH Overall dimensions (mm): 300 x 660 x 400 (WxLxH) Weight: 35 kg The following cutting accessories are included: - Ø 23 mm corer - Blades for cutting into 10 and 24 segments
Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air
Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.
Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; Max. Stapling thickness 25mm with clamp slung and 40mm on both sides; 2 staple heads; Length bracket back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; lenght of clamp 14mm.
- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg
Rego SM4 Stroke Machine Stirring Machine for 40 Liters For sale is a Rego SM4 stirring and stirring machine, a robust and powerful device for bakers. The machine is ideal for whipping and stirring various creams and light doughs. Rego SM4 Stroke and Stirring Machine - Manufacturer: Rego Herlitzius - Model: SM4 - for mixing, kneading, beating and stirring a wide variety of masses (e.g. doughs, creams, shames, etc.) - for a maximum of 40 litres - Speed adjustable - 2 working functions, stirring or beating - Boiler lighting - With EMERGENCY stop button - incl. 2 whisks + 1 kettle Technical data and dimensions: - Connection 400V, 16A plug - Power: 1.6 kW - Dimensions: 720 x 680 x 1710 mm, WxDxH - Weight approx. 285 kg The machine can be visited and tested by appointment. More information and pictures as well as delivery on request.
Head circuit for OASE spiral kneaders of type SPK125/150/AE for spiral kneaders with soil emptying or center emptying
AVE Labelling Machine. 3 labels, Capacity: 6 - 7 000 b/h
Kosme Hot Melt Labeller Capacity 8 000 b/h
Industrial polishing machines Hau and Metabo For sale are polishing machines from HAU and Metabo Metabo 7777 SL63-44 HAU HR4 10948 HAU SMP P850 See photos and installation plan plus accessories/spare parts (a.a. polishing paste feeder) together 4.5 - 5.3 tons. These have been standing unused since 2019 in 58-100 Świdnica in Lower Silesia in today's Poland. Until 2019, these were used in ongoing production in the Munich area and then brought to Poland to continue working with them there. However, the project in Poland was never implemented. Pricing: FOT 58-100 Świdnica, Poland, lashed to pallets. Viewing by arrangement. The photos are still from the original location in Munich. More photos on request
used
Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers
MAZAK CO2 Laser Cutting Machine STX510 MKIII 4kW -made in Japan- ! SOFORT EINSATZBEREIT ! over-recovered, very well-preserved MAZAK laser machine with 4000W Panel size: 3000mm x 1500mm minimum set-up area of 2.9m x 7.3m Puncture sensor Plasma sensor Burning Sensor automatic nozzle change Small parts conveyor belt Ball roller table Fast-punching fully encapsulated machine cover Cast bed, no foundation needed FE: up to 20mm VA: up to 15mm ALMG: up to 10mm Plastic, wood cutable incl. CAD / CAM Software 2020 Version incl. 12 months warranty (within Dtl.) incl. delivery incl. commissioning + training Testing under electricity ready for delivery immediately immediately ready for use =optional with fully automatic loading and unloading MAZAK CELL=
Soehnle Professional 2790 Weighing Terminal Floor Scale 9013 The SOEHNLE 2790 display unit is very handy and also protected according to protection class IP65, which means that it can also be used in wet areas without any problems With only five buttons, the SOEHNLE 2790 digital display device is particularly easy to operate. The built-in functions are on/off, tare, clear tare, zero and print. In addition, the 2790 indicator also has a piece counting function. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included in the scope of delivery, but also with batteries for up to 100 hours independently of the mains. The 20 mm high digital display is backlit when plugged in and is therefore particularly easy to read. In battery or battery operation, an automatic switch-off can also be set to protect the batteries and batteries. Soehnle ...
Krones Canmatic labeling machine Capacity: 24,000 b / h
Modular station Krones Contiroll HS
DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operating revenue, improves operations with integrated queuing and collection system through various innovative features of the SM-5500B. Experience real retail solutions offered by DIGI's PC scales. • Linerless printing with integrated automatic cutting device • Watermark printing • Speed ID • InfoTag and electronic signage e.Label • Integrated queuing and collection system •Waste management • Interactive screen display Power source 230 V (50/60 Hz.) Operating Humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator display 12.1" Customer Display 7"WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, Dimensions (in mm) 385(W) x 507(D) x 148(H) ...
Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
General Manufacturer: Stama Type: MT 733 two Year of Make: 2020 Control: Siemens Sinumerik 840D SL Travel: X 615 mm Y 290 mm Z 500 mm Rapid traverse: 65 m/min Feed: x 4,000 N / Y 4,000 N / Z 8,000 N Main spindle unit Speed: 12,500 rpm Tool holder: HSK-T63 Pull-in force: 18 kN Spindle bearing diameter: 80 mm Tool magazine Number of available magazine slots: 64 Tool diameter max. when fully equipped: 78 mm Tool diameter max. with free secondary positions: 140 mm Tool length: max. 300 mm Tool holder: HSK-A/T63 Tool weight: max. 10 kg Total chain load: max. 115 kg Rotary swivel unit Swivel angle: +30 to -180° Swivel axis repeatability: ±1" Swivel axis speed: max. 61 1/min Clamping torque tangential swivel axis: 3,000 Nm Clamping torque tangential counter bearing: 1,800 Nm Condition Condition: Used Functional: tested and fully functional
Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6
New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.
Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Tailstock travel: 175 mm Tailstock quill holder: Morse cone: 4 MK Quill stroke: 140 mm Quill diameter: 95 mm Pressure capacity: 17 kN Connection 50 Hz 3x: 380 Volts Total power requirement: 65 kVA Spindle speeds: Infinitely variable from 0 rpm to: 4000 rpm Spindle bore: 77 mm Tool shank cross-section: 25x25 mm Turning diameter above the bed: 420 mm Turning diameter maximum: 250 mm Turret slide: Longitudinal travel (Z-axis): 1150 mm Flat travel (X-axis): 230 mm More items - new and used - can be found in our shop! International shipping costs on request!
capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning
The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm
Description Seiger lathe SLZ 800E x 4000 Details Machine no. 4443 Year of construction 2008 Siemens Cycle Control Spindle holder according to DIN 55027 size 11 Spindle bore Ø 130 mm Spindle diameter in the front bearing 170 mm Spindle taper 1:20 Drive power 20/28 kW Main spindle speed switching stage "I" 9-1,800 min-1 Main spindle speed switching stage "II" 9-400 min-1 Maximum torque: 3,200 Nm Center width 4,000 mm Circulation Ø above the bed 810 mm Circulation Ø above the face slide 540 mm Bed width 480 mm Machine dimensions 2,000+center width x 2,750 x 2,000 mm Permissible workpiece masses between points without setting stick 2,000 kg Permissible workpiece masses between points with a setting stick 2,200 kg Permissible workpiece masses between tips with two setting sticks 2,500 kg Permissible workpiece masses flying i ...
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2007 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2006 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads Bjgcgttd8s incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Fiber Laser Machine HLF Power: 4kW Sheet metal size: 3000 x 1500mm Alternating table Sheet metal layer detection Siemens touchscreen control with LAN/USB Siemens Drives Precitec Auto Focus Procutter Cutting Head THX Guided Tours IPG resonator with 4kW is included: Guarantee CAD CAM Software Commissioning Delivery within Dtl Training offered
Description Heyligenstaedt Lathe NDb-630 Details Year of manufacture 1980 Tip height above bed 630 mm Turning length 3,000 mm Turning diameter over bed 1,240 mm Turning diameter over bed slide 960 mm Max. workpiece weight without support 10,000 kg Bed width over guideways 850 mm Number of guideways 2 Bed height 650 mm Slide path 3,000 mm Face plate diameter 1,100 mm Main spindle diameter in the front bearing 280 mm Max. torque at the face plate 25,000 Nm max. workpiece weight clamped on the fly at center of gravity distance 250 mm in front of face plate 4,000 kg Main spindle speed range 2.24 - 450 rpm. Number of main spindle speeds 4 mech. Levels Power main motor 50 kW Main motor speed 100-1,000-2,500 rpm. Number of supports: 1 Cutting force support 4,000 kg Guide length front bed track 1,300 mm Quill diameter 250 mm ...
Diosna spiral mixer Model: SP80 D Serial: 9611-2118 80kg stainless bowl, stainless dough hook, two speeds, two timers, 3Ph
2 heads, manually adjustable approx. 50 - 320 mm, foot switch, approx. 300 mm working depth
- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...
Spiral kneader Gostol with 2 extendable stainless steel boilers We have 2 kneading machine and 4 boilers in the warehouse. -Stainless steel spiral -Stainless steel boiler -2 speeds -2 timers automatic
Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available
Ceever Spraymaster Turning Spray Washer The Spraymaster series of industrial washing systems are advanced solutions for spray cleaning of small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotary table that allows the parts to be evenly wetted with the spray jet, these systems ensure maximum effectiveness in surface treatment. Inside the treatment chamber, a channel system with strategically positioned nozzles allows for complete spray cleaning of all surfaces, optimizing chemical, mechanical and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Loading: 500 kg/batch Voltage: 380 volts Current consumption: 90 A Connected load: 62 kW More items - new and used - can be found in our shop! International shipping costs on request!
• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...
Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
- CE certification - Complete, original wood Her machine documents and operating instructions - Weight: 720 kg (basic machine), approx. 860 kg (machine with aggregates) Assembly: • Control panel (1888) SK 180 • Fully automatic edge feeding (1903) - Edge thickness striped goods 0.3 - 8 mm - Edge thickness rolled goods 0.3 - 3 mm - max edge height 51 mm • Adhesive application station (1906 M) - with hot melt adhesive cartridge - via sword nozzle with electro-pneumatic control - Temperature selector - Heating time approx. 5 min - Temperature approx. 190 - 240 degrees Celsius - Workpiece thickness 6 - 45 mm • Printing Unit (1912) • Cross-cut unit (1918) • Combino milling unit (1942 M) - for flushing, chamfering and radius milling • Pull blade unit (1929) - Edge thickness max. 3mm • Sandbar unit (1940) • 2 x suction connections 70 mm each • Compre ...
Dimensions (L/W/H): 2150x1300x1780 mm Weight: 1000 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
