mikron 400 u used for sale

Used decanter made by Alfa Laval, model: UVNX 314. Two motors: 7,5 kW and 3 kW. Parts in contact with the product in stainless steel. Max drum speed 3250 rpm. Documentation available. The machine was used for edible oil.

Uhlmann C150 Horizontal Cartoning Machine Blister Packing, - Fully automatic blister packaging and simultaneous feeding of package inserts - max. output 150 FS/min - depending on product Folding carton format range: Min.: 30 x 15 x 70 mm, max: 100 x 85 x150 mm Brochure size: Min: 100 x 80 mm, Max. 210 x 300 mm - Operating voltage 400 V .- Connected load: 4 KW - GUK brochure folder 4-fold folding - PCE code reading - Luminizens control, presence control for package inserts in folding boxes - Embossing station - Brochure insertion - Venturi nozzle Mechanically overhauled Optional: - New hardware and software PLC Mitsubishi control and 8 inch color touch panel - Cognex 1D Barcode and 2D Matrix Codes Reading System for Leaflets and folding carton code -Remote maintenance - 10-year spare parts procurement warranty

x-travel: 3000 mm y-travel: 2500 mm z-travel: 1000 mm Control: Siemens type: 840 D Feed: 5-30.000 mm/min Table area: 2000x2170 mm table load: 1500 Kg/m² T-slots: 22 H9 distance between uprigths: 2500 mm spindle turning speed range: 6000 U/min spindle drive: 36 kW spindle taper: HSK 100 Tool changer: 30 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 8x6,4x4,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 , 230 mm, 130 mm

I sell the Weinig Unimat 300 four-sided planer, built in 2004 Feed speed 5-30 m/min. Working width 230mm Working height 130mm 5 Spindle Configuration: bottom - right - left - up - down Combined power 28kW 3-zone pneumatic pressure Good condition. Fully operational! Available soon. Includes full documentation and CE certification.

From an operational resolution: Zagro UVB Z 500 S YEAR OF MANUFACTURE unknown 380 VOlt Emergency stop Saw rollers Ø 500 mm Cutting length 700 mm Cutting width 450 mm Cutting heights 530 / 650 mm Saw blade lengths 3720 / 3920 / 4120 mm Table size 1000 x 800 mm AC 230 V / 16 A Width 1000 mm Total height 1800 mm Total weight 180 kg ----Engine cover is missing--see photo---

Weight: 0,08 tons Length mm: 1900 Width mm: 550 Height mm: 700 Condition machine : Moderate Photos/film available: Photos available

SPECIFICATIONS Pilot plane on the entrance side: 2000 mm Grooved table Machinable width: max. 180 mm Machinable height: max. 150 mm Spindle diameter: 40 mm Shaft drive Drive shaft power: 4.0 Kw Soundproof booth Spindle Configuration: I Shaft: Bottom 4.0 kW II Shaft: Right 4.0 kW III Shaft: Left 5.5 kW IV Shaft: Right 5.5 kW V Shaft: Top 11.0 kW VI Shaft: Bottom 4.0 kW VII Shaft: Top 11.0 kW VIII Shaft: Universal 4.0 kW

1x champagne cork orienter Cames / Kematec, used, type: P UNO E 94, built in 1994, capacity max. 5,000 corks/h, the machine ran flawlessly until the end, dimensions: D: 2.20 m, W: 1.35 m, H: 2.40 m, NP 17 ́ +, technical data see mail Kematec 22.11.19 Price: €6,900 plus VAT from stock Dolgesheim more offers..: vino-tec

2-hole paper drilling machine Hole spacing 80mm Paper Insertion Height 45mm Heavy Cast Iron Table Table size W61 x D80 x H68 cm 220V=1.9A / 380V=1.1A

Immediately available overhauled lubricating oil pump, also used we have all in stock

Screw shooting system with Sortimat . up to 3 pcs. available. Have only run for a short time. With Sortimat .

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Conversion kit cylinder head, without thermocouple, new for the G9512 12 cylinder. We sell here a complete conversion kit Liebherr G9512, new for the Liebherr 12 cylinder gas engine. consists of the following items: 12x cylinder head; 3rd version, without thermocouple 10152182 12x cylinder head gasket; G9508/G9512 10118055 72x Cylinder Head Bolt; M18 x 2 x 246, G9512 9080476 24x Cylindrical pin 10470574 12x gasket; intake manifold, G9508/G9512 10118991 36x Six-round screw 10332845 12x Gasket; Exhaust Pipe, G9508/G9512 9078308 12x valve cover gasket; G9508/G9512 9079885 12x O-ring; valve cover, G9508/G9512 7381028 24x Cap Bolt; M12 x 80, G9508/G9512 4043173 2x O-ring; 144.5 x 3.00 7380154 24x sealing ring; 14.7 x 22 x 1.5 10011866 4x Expansion Joint; Exhaust Gas, G9508/9512 10133038 10x clamp; exhaust gas compensator 10144932 Shipping: DHL, DHL Express, freight ...

Fine impact mill B 315 with 15 kW motor, newly mounted

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

Untha RS40 Operating hours only 420 Motor 2x11KW Shaft length 750mm Knives are in top condition! For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message. Net price

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

Untha LR 1400 Year of construction 2008 Motor 30KW Rotor length 140cm Weight 3t The machine is used for: Pallets Solid wood OSB / Particleboard / MDF Construction timber and waste wood Wood with nails or screws For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively inspected before sale to ensure reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Máquina serigráfica con 1 cabezal Área máx. impresión: 340 x 380 mm Ancho máx. de banda: 350 mm Diámetro máx. de bobina: 700 mm Registro por marca Desbobinador y rebobinador independiente Secado UV

Year: 2001 - technically efficient, ready to work (directly from the client) - corner cleaning machine SV 494 CNC - for-head welding machine AKS 6110 - turning station - cooling station - flash limitation: 0.2 - 2 mm

Used APV ultrafiltration plant. New 1994. Nominal capacity of 20 000 kg/h. Information on the membranes that were last used in UF3: Burkert T CUT Core UF200-125 075 3659 – 3.6 m x 80 pieces. Each membrane contains 19 filter tubes, i.e. these are AC19 membranes. Tubular core for ultrafiltration Membrane - Material: PES - MWCO: 200 kDa - Tube diameter: 12.3 mm (inside) - Membrane area: 2,7 m² Module - Length: 3,658 mm - Diameter: 75 mm - Head material: Polysulfone -Electrical connection power: 120kW

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Used Stork UHT Plant – Model 2000 Reliable UHT processing plant designed for the sterilization and treatment of dairy and plant-based beverages. The Stork Model 2000 offers efficient thermal processing and is suitable for medium-capacity production of UHT products. General Information - Manufacturer: Stork - Model: 2000 - Refurbishment: Completely refurbished in 2015 - Condition: Very good used condition Technical Specifications - Capacity: 1,600 l/h - Control System: Siemens S7 PLC Suitable Products - The plant is designed for processing a wide range of UHT beverages, including: - UHT milk (plain / white) - Chocolate milk - Flavoured milk - Soya UHT drinks Key Advantages - Reliable Stork UHT processing technology - Completely refurbished in 2015 - Suitable for dairy and plant-based beverages - Equipped with Siemens S7 PLC control system - Compact solutio ...

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic rebating machine / automatic cross-cutting machine 2 spindles

Cutter Manufacturer: Seydelmann Model: K 204 Ultra Made of stainless steel Volume: 200 liters 2 knife speeds 2 bowl speeds 2 mixing speeds Dimensions: 280x205x255cm Electric power: 78kW Voltage: 400V, 3 phases, 50 Hz

OKUMA MULTUS U4000 1SW 1500 Mfg. Year 2016, Installed 2018 OSP P300S control Movements: X-axis: 695 mm Y-axis: 300 mm Z-axis: 1,600 mm W-axis: 1,554 mm B-axis: -30° to +210° max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Big Bore sub spindlel 32/22 kW, spindle nose A2-11 Max. speed: 3,000 rpm Milling spindle 22 kW, max. speed: 12,000 rpm Full B-axis Tool magazine for 80 tools High accuracy option C-axis on main and sub spindle Hydraulic steady rest, SMW Autoblok K4 - Clamping range: 30-245 mm Preparation for Multitool Renishaw System, RMP60 probe Renishaw TRS2 Tool Breakage detection swarf conveyor Mayfran MT10 20 bar high pressure pump API Library 2 One-Touch IGF Advance M-D Kit Helical turning function Z-axis automatic zero point offset by touch sensor main and sub spindle C-axis automatic zero offs ...

Combi steamer RATIONAL SCC61 with Ultra-Vent hood combination with substructure mobile – top condition: Combination of: -Ultravent hood ready to plug, 230 V, 0.45 kW, 2.5 A, 2300,00 €, -Chassis mobile with brakes, 85x70x90 cm with 12 shelves for 1/1 GN container, closed at the sides, 650,00 €, -Combi steamer SCC61 for 6 x 1/1 GN containers, 400 V, 10 kW, 16 A, plug 16 A, SelfCooking Control® – with 9 applications: large roast, pan-fried, poultry, fish, side dishes, potato products, egg dishes/dessert, baking, finishing®, combi steamer mode with the operating modes: steam 30-130 °C, hot air 30-300 °C, combination of steam and hot air 30 – 300 °C, finishing®, care control – self-cleaning program, touch screen, central command dial with "push" function, Hand shower with automatic return, core temperature sensor, Cool Down for fast and safe cooking chamber cooling ...

Mobile semi-automatic stretch bander. Max. band width: 30mm

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

Samco Unilev 15 edge sander Tape dimensions 150 x 2170 mm Two belt speeds Adjustable Boot Table top adjustable at 0-30 degrees Adjustable sanding height Pneumatic tensioning of the sanding belt Sanding belt oscillation Motor power 3kw

turning diameter: max 300 mm turning length: max. 2000 mm control: Siemens Serie 810D turning spindle: Durchlass 90 mm : 300 mm Feed speed: 6/6 m/min. number of tools: 8 quill stroke: 300 mm diameter of quill: 105 mm taper MK: 6 coolant tank: 100 l total power requirement: 15 kW weight of the machine ca.: 4650 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2 x 2 x 2 m No. 3999 Universal tool milling machine HERMLE UWF 801 Working area: 500 x 430 x 400 Drive: 3 Control: Heidenhain TNC 135 Fixed table 800 x 390 mm chip tray documentation Spindle SK 40 Speed range 50 - 2500 min-1 Space requirement approx. 3 x 3 x 2 m Weight approx. 1400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hopper and vibratory trough for Uhlmann UPS

x-travel: mm y-travel: mm z-travel: mm x-axis: 6000 mm y-axis: 2600 mm z-axis: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...

Universal Machine Mixer Type 45 Bowl capacity approx. 45 litres with tilt function 180° Capacity approx. 10 to 180 litres/hour E-system NEW Connection 400V, 5.5 kW,16A-CEE plug Machine More blenders in stock!

CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 28 cooling units are available. All 28 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

• Set up for ALU/ALU operation and ALU/PVC • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 18 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), mech. clamping • Cover film-Ø max. 240mm, core-Ø 76 mm, mech. tensioning • Splice Detection • Film feed after forming and sealing • \kerning2 Print mark control\kerning0 • \kerning2 Film stretching unit\kerning0 • Pin hole detection for form foil and lid foil, Visiotec VisioScan MT-160/200 • Without Heating plate station for PVC (can be delivered later upon request for extra charge) • Forming station with compressed air for PVC form foil, pre-equipped for pre-stretching die • Mechanical forming station for ALU forming foil • \kerning2 PLC Beckhoff IPC, Servo control ...

Shredder UNTHA RS-60 Main shaft speed: 17.3 rpm Secondary shaft speed: 20.5 rpm Chopping discs width: 19 mm Drive power 2x30 kW 400 V, 50 Hz Screen perforation round: Ø 35 mm External dimensions of the cutting unit with drive: LxWxH: 2440x1470x1040 mm Total weight without base: approx. 7,500 kg Control cabinet with wiring : complete incl. 1xComplete second knife set after overhaul at Untha Incl. funnel and base clean machine, checked, always maintained, 1 owner !

Baked goods freezer Double Door Freezer for Euro sheets 60/80 - 58/78 Dimensions: 810 x 1020 x 2200 mm, WxDxH Connection 220V, 1500 Watt Occasion

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

table length: 2000 mm table width: 1800 mm table load: 12,5 t Travel: 1250 mm width of T-slots: 28 mm T - slots distance: 160 mm total power requirement: 6 kW weight of the machine ca.: 9,2 t dimensions of the machine ca.: 3,7x2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.