127,270 used machines on RESALE, but how to find them? Machine Search
centre height: 160 mm chucking diameter: 160 mm indexing: 15 ° groove width: 12 mm weight: 50 kg dimensions of the machine ca.: 550 x 230 x 200 mm - S/N: 1117 - AROWA three-jaw chuck including jaws - indexing every 15° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 762 , 508 , 508
HAAS UMC-750SS Machining Center TECHNICAL FEATURES: Year: 2019 Number of continuous axes: 5 X-axis stroke: 762 [mm] Y-axis travel: 508 [mm] Z-axis travel: 508 [mm] C-axis angular travel: 360 [°] Table dimensions: Ø630 x 500 [mm] Maximum weight Tabletop Allowance: 300 [Kg] B-axis angular travel: +110 [°] / 350 [°] Pin Attachment: CT 40 Maximum speed Spindle: 15000 [rpm] Spindle power: 22.4 [kW] Number of tool magazine stations: 40 Capacity of the garden tray: 284 [l] Number of hours in operation: 5277 [h] EQUIPMENT INCLUDED: x1 Center-Spindle Watering x1 High Pressure Coolant Pump 21 [bar] x1 RENISHAW Wireless Coin Probe x1 Calibration Sphere x1 RENISHAW Tool Probe x1 HAAS Oil Mist Vacuum x1 HAAS offset crank x1 HENNIG Chip Conveyor Type 101435 Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request, ...
thickness of jaw: 160 mm : 50 mm clamping width: 125 mm clamping capacity: / t weight: 40 kg dimensions of the machine ca.: 390 x 285 x 165 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Engine Brand: PERKINS, Condition: USED, Working Hours: 7700 Hour(s), Engine Condition: Used , Starter Voltage: 12 Volt , , https://www.hamofa.com/stock/compressors/ingersoll-rand-p70wn-compress or-7-bar-used/42278, , = More information =, , Type number: P70WN COMPRESSOR 7 BAR
thickness of jaw: 215 mm : 45 mm clamping width: 170 mm weight: 62 kg dimensions of the machine ca.: 545 x 445 x 160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm : 52 mm clamping width: 260 mm clamping capacity: 4,5 t weight: 52 kg dimensions of the machine ca.: 550 x 250 x 125 mm - Serial-No.: 7514 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 260 mm tool adaptor: 40 SK : S 20 x 2 für DECKEL Slide cross: 48 mm Weight: 5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 10000 mm y-travel: 1500 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Head type: 3-SH/60-125-PE/T (DeCo) Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No
Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.
I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !
Palletizer KRONES PRESS UNI, production year 2007 Along with the conveyors presented in the layout. • Palletizer for collective packages, capacity: approx. 50 pallets / h for specific palletizing formats, • Top loading, packs served in 2 tracks, • Pallet magazine, • A feeder for cardboard pads with a magazine for cardboard pads, • Control cabinet based on Siemens S7 control, • A platform for the operator in accordance with the dimensions presented in the layout, • Operator Panel, Packs and pallet conveyors in accordance with the presented layout 1. Empty pallets infeed conveyors 2. Packs conveyors
liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition
Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation
Universum Winding Machine Type: LWT -3 - EB 2-40 with transport work table wood Long castors and flat castors Stainless steel cladding 380 V 50Hz on rolls Dimensions universe: Height: 170cm Width: 170cm Depth: 80cm Dimensions table Height: 85cm Width: 200cm Depth: 100cm
I sell the Fensterbau Profil Umfälzautomat Zentrum Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 4 pcs. available. Condition very good !
I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !
I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !
DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz
APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...
Ultrafiltration Membrane filter device for the clarification of all kinds of fruit juices. manufacturer: Mabex Engineering GmbH type: UF412 dynamic cross-flow filtering. Mabex tubular membranes in bundles A-19. filtering capacity 12,000 l / h electric power 26 kW water supply capacity 80m3 / h compressed air 6 bar The device is complete and functional. Technical Documentation Software We send photos at the customer's request.
Used 2-stage evaporation station UNIPEKTIN. New 1997. 1-stage aroma trap, 2-stage concentration. For apple juice (cloudy / filtered): Input quantity: 4212 kg / h / 2840 kg / h Input dry pulp: 12 / 17.8% Temp. entrance: 15/45 degrees C. Water evaporation: 3500 kg / h Output quantity: 2,840 / 712 kg / h Temp. output: 50/55/25 degrees C. Initial dry mass: 17.8 / 71% Aroma (15x): 26.8 l / h Temp. aroma: 7 degrees C. Steam consumption: 1450 kg / h Fresh water consumption: 5 m3 / hour
Type MZUTL 15 Working capacity ~ 15 liters Total capacity ~ 26 liters Minimum working capacity of 5 liters Tank inner diameter ø 292 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, SILICONE, NBR, PTFE, EPDM Homogenizing mixer weight ~ 474 kg Height 1760 mm Height with Raised Lid ~1950mm Length 1770 mm Length with tilted cabinet 2160 mm Width ~ 780 mm Width with tilted cabinet ~ 1050 mm PTFE double-acting scrapers Anchor Agitator Drive Electric Motor 0.55 KW, 1400/88 RPM Gear ratio reducer i=15.84 Rotation of the anchor agitator Continuously 32+160 rpm Comb homogenizer HZB N Homogenizer Drive Electric Motor 7.5KW, 2885rpm Max. sound pressure level 89 dB (characteristic A) Homogenizer rotation Continuously variable 1430+6630 rpm Jacket heating ZBG heating tank (7 kW) Jacket Cooling HE Heat Exchanger Minimum / maximum temperature in the t ...
Type MZUT- EMBF 15 C Working capacity 15 liters Minimum working capacity ~ 5 liters Total capacity ~ 26 liters Tank inner diameter 294 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, NBR, PTFE, EPDM Task Mixer Weight ~ 276 kg Height ~ 1630 mm Length ~ 1390 mm Width ~ 720 mm EMBF Emulsifier Emulsifier drive Electric motor 5.5 kW, 2890 rpm Emulsifier rotation Continuously 1500-5500 rpm Emulsifier rotation during CIP Max 4500 rpm Heating jacket heating tank (7 kW) Minimum / maximum temperature in the tank 5 / 95° C Minimum / maximum operating temperature in the tank 20 / 90° C Minimum / maximum jacket temperature 5/ 130° C Minimum / maximum operating temperature in the jacket 25/ 120°C Permissible tank pressure 0 bar Maximum jacket pressure 4 bar Electrical power supply 3x400V+N+PE, protection 50 A Power Consumption -15kW Tank Lighting L ...
Unimix SRC1600 vacuum processing vessel (vessel -1/2bar, 133C, total capacity 2145Ltr, working capacity 1600Ltr; jacket 4bar, 151c, 130Ltr., dished bottom, hydraulic lift to open the top, with EKATO S-Jet Homogeniser SJ 1000 SO EX in the bottom of the tank (380 V, 18kw, 3000rpm, new 2009), anchor stirrer/scraper (new 2022) with ATEX PTB motor on the top ( 380´V, 13,5kw), , vacuum pump Elmo Rietschle L300 2BV5111 incorporated inside main body, working pressure -1/+3bar, reactor outer sizes 1950x2300x2900 heigh (including motor), mounted on frame (floor size 2200x3300, frame height 300mm) ,material stainless steel, new operation software 2022, reactor is still in use for cosmetics production, Year of construction of main vessel 1992, all reconditioning data available. At a reduced price compared to new. Ready for shipping in 30 days after transaction agreed. You are welcome to inspect the ...
Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...
UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg
Used Used Filling Syncrobloc CFT Isobaric 30.30.6 12.000 bph: Year: 2017 Condition: Good SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Production Capacity: Up to 12,000 bottles/hour Container Types: ? 0.33 L glass bottles (long neck and champagne type) ? 0.75 L glass bottles (champagne type) Supported Caps: ? Crown ?26 mm on 0.33 L long neck bottles ? Crown ?29 mm on 0.33 L champagne-type bottles ? Crown ?29 mm on 0.75 L champagne-type bottles Labeling: ? Self-adhesive front and back labels for 0.33 L long neck bottles ? Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: ? 12,000 bottles/hour without orientation ? 11,000 bottles/hour with orientation Operation: ? PLC + touch-screen panel for control ? Automatic speed adjustment via inverter and sensors ? Status indicator column light Main Components: ? 4 self- ...
Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg
Industrial cutter Seydelmann K 206 Ultra, 200 litre bowl made of stainless steel, largely solid stainless steel, operation via cross lever switch, separate digital display, main cover and product ejector hydraulic, transparent noise protection cover made of special plastic, separate stainless control cabinet with built-in main switch, central lubrication point for knife shaft, balanced, exchangeable knife head, 2 knife speeds, 2 mixing gears forward, 2 separately switchable Bowl speeds, DGA control, temperature sensor, 6-knife head, 400 volts, 50 Hz, 200 amps
Seydelmann Kutter K 40 Ultra, Seydelmann K 40 U, 40 liter bowl made of stainless steel, largely solid stainless steel, operation via toggle lever switch, separate digital display, noise protection cover made of transparent special plastic, central lubrication point for knife shaft, balanced, replaceable knife head with new knives of your choice, 2 knife speeds, 2 bowl speeds, 2 mixing gears forward, DGA control, 6-knife head, 3-knife head optional for an extra charge available, operating voltage 400 V / 50 Hz
ID3737 Nordmeyer on Unimog Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled in the last 3 years for approx. €40,000 (power swivel, hydraulic pumps, main gearbox for engine overhauled, new flushing pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled the last 3 years for about 40,000 euros (power turntable, hydraulic pumps, main gearbox for engine overhauled, new mud pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm
Product number: 2357 Model: Slicer with Franz slice unit Type: AE0148179 Serial number: 044 Year of construction: 2018 Capacity: max 120 strokes/min. Cutting thickness: max 20 mm Strip cutter: Franz MST64/545 OS Air pressure: 6 Bar, 72 Nl/min. Power: 3 x 400V, 50Hz, 5.5kW Weight: 1100 kg
Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...
Unimog Mercedes - many more bodies/attachments could also be provided. Price ex works, in 2007 the Unimog was retyped.
; Gross weight [kg]: 18000; Engine: Baudouin 12M26 G1000/5; Accessories: Tanker, Battery, Control Panel, Stahldach, Fuel tank available but capacity unknown., 40FT dimensions with twistlocks
Omschrijving Lengte mm Aantal Bovenmes H=66,5mm, R=0,8 85gr 835 2 Bovenmes H=66,5mm, R=0,8 85gr 415 2 Bovenmes H=66,5mm, R=0,8 85gr 300 1 Bovenmes H=66,5mm, R=0,8 85gr 150 1 Bovenmes H=66,5mm, R=0,8 85gr 50 1 Bovenmes H=66,5mm, R=0,8 85gr 40 1 Bovenmes H=66,5mm, R=0,8 85gr 20 1 Bovenmes H=66,5mm, R=0,8 85gr 15 2 Bovenmes H=66,5mm, R=0,8 85gr 10 1 Bovenmes H=66,5mm, R=0,8 85gr LEFT 100 1 Bovenmes H=66,5mm, R=0,8 85gr RIGHT 100 1 Ondermatrijs V10, R=0,8, 85gr 835 2 Ondermatrijs V10, R=0,8, 85gr 415 2 Ondermatrijs V10, R=0,8, 85gr 300 1 Ondermatrijs V10, R=0,8, 85gr 150 1 Ondermatrijs V10, R=0,8, 85gr 50 1 Ondermatrijs V10, R=0,8, 85gr 40 1 Ondermatrijs V10, R=0,8, 85gr 20 1 Ondermatrijs V10, R=0,8, 85gr 15 2 Ondermatrijs V10, R=0,8, 85gr 10 1 Totaal 26 Price € 2250,-- New prijs € 3250,--
Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm
maximum number of results exceeded
please refine your search
