mikron 400 u used for sale

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Control: Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ---------------------------------------------------------------------- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ---------------------------------------------------------------------- - Tec ...

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

: gebraucht : 2020 : 1658 : prompt, Zwischenverkauf v : Bulgarien : 26500 € : 1 : 22600 € : 400 mm : 1000 mm : 200 mm : 52 mm : 235 mm : 320 mm : 6 : 6 MK : 12 : 50-2.240 1/min : 80 : 0.015 - 0.6 mm/U : 0.0075 - 0.3 mm/U : 40 : 0.25 - 7.5 mm : 120 - 4 Gänge/ : 0.0625 - 1.875 : 235 mm : 110 mm : 50 mm : 4 MK : 100 mm : 4 kW : 2750 mm : 1100 mm : 1600 mm : 1540 kg This machine is used in our workshop for repair work, therefore it has only been used very little so far. (New price € 36,070.00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultifix Type Bwith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection saf ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 8200 € : 158.26 € : 1250 kg : 1300 mm : 450 - 550 mm : 400 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 1250 400 M D1300) € 10.900,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sliding table length: 3200 mm; cutting width at the fence: 1350 mm; cutting width at the cross cut: 3200 mm; cutting depth: 125 mm; scoring unit: ja; sawblade diameter: electric; tilting adjustment sawblade: electric; adjustment fence: manuell; readout sawblade tilting: Scala; read out sawblade height: -; read out fence: Scala; read out crosscut stop: Scala; sawblade diameter: 400mm; number of speeds: 3000 / 4000 / 5000 U/min; motor power: 7 kW; motor brake: yes, automatic; suction connection: 80mm und 120mm; machine length: 3400mm; machine width: 2000mm; weight: 900kg;

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units separately adjustable; 1. brush: metal brush 220mm; 2. brush: tynex brush, granulation 80, diameter 220mm; height adjustment: handwheel; height adjustment: mechanical counter; feed speed: 4 - 12 m/min; motor power brush: 2 x 3 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 900mm; weight: 500kg;

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

General SKU244Y171 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Inlet diameter22 mm Specified Features - Basket centrifuge MaterialStainless steel 1.4404 (316L) Basket centrifugecheck Closed basketDuplex 2205 Capacity100 dm³ Basket sizesø 800 x 400 mm Max. loading weight125 kg Hydraulic operatedcheck Liquid outletDN100 With hydraulic unitHydra power Motor1,50 kW, 400 V, 1445 rpm With variable speed drivecheck Max. basket speed2600 rpm Max. temperature0° / 80 °C Information MakeRiera Nadeu Serial10590/P19/00726 Magento base g_extra_specificationsBasket dia. 800mm, Max. 2.600 Rpm, solid wall basket, contact parts in stainless steel AISI-316L / DIN1.4404, Basket wall in Duplex 2205, Max. allowable weight 125 KG according to technical documentation (manufacturer tag mentions 180 KG), motor 11,0 KW, 400/690 Volt, with control cabine ...

General SKU071F406 MakeFima Process GmbH TypeTZT-400x300 No.20300211 Year of construction2003 Mounted on framecheck Main Features MaterialHastelloy Motor7.5 KW Inlet diameter400 mm Specified Features - Basket centrifuge Basket centrifugecheck dryer Perforated basketcheck Capacity37 Ltr Basket sizesdia. 400x300mm Max. loading weight20 kg Motor7,5 KW, 400 Volt (Ex) Max. basket speed1800 Rpm With jacketcheck MaterialStainless steel 2.4602 (Hastelloy C-22) Information LocationBarneveld Floorspace2,5x1,1 m Total height1,3 m Weight2000 kg ATEX compatiblecheckBasket centrifugesDiscountFima ProcessCentrifuges > Basket centrifugesDiscountBrand > Fima Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...

General SKU023C129 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure vapour evaporator6 Bar Main Features Surface12.5 m2 Specified Features - Falling film evaporator Falling film evaporator(1x) Heating surface12,5 m2 Tube capacity120 Ltr Number of tubes:34 Tube diameter40mm Tube length3000mm Shell capacity210 Ltr Max. temperature140 Degr. C. Capacityvessel 550 Ltr With jacket(coil), Capacity 10 Ltr MaterialStainless steel 1.4571 (316Ti)Falling film evaporatorsDiscountRutzColumns > Falling film evaporatorsDiscountBrand > Rutz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible.

Two heat-resistant flat belt conveyors Integra are available. 1) Center distance: 15200mm, belt length: 15800mm, belt width: 1180mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including spare edge protection rubber and motor bracket. 2) Center distance: 7500mm, belt length: 8100mm, belt width: 1080mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including 6× Kito chain hoists. Documentation available. An on-site inspection is possible.

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 € : 400 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 4000 mm : 2600 mm : 20500 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.900 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of  ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62400 € : 1179.36 € : 4100 mm : 6 mm : 4 mm : 50 mm : 12 1/min : 1.5 ° : 20 : 17 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 3 Stk. : 865 mm : 580 mm : 4510 mm : 5230 mm : 2300 mm : 3600 mm : 2150 mm : 11460 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kaltenbach metal saw type KKS 400E Technical data: - Description: see data sheets - CE

General SKU020Y107 MakeDrais Mannheim TypeTurbuMix TM-400E FM1 No.56009 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Motor18.5 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-armscheck Capacity400 l. Useful capacity120—300 l. Trough sizesø 700 x 1050 mm Top connectionsø 300 mm, ø 80 mm, ø 65 mm Inspection hatchø 700 mm Outletø 125 mm Motor8,2/11,0 kW 400 V With lump breakercheck Motor7,5 kW 400/690 V Speed lumpbreaker1450 rpm MaterialStainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace3,0 x 2,1 m Total height1,9 mCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesPowder turbo mixersOther chemicalStarc ...

General SKU107W545 MakeVevey S.A. No.467 Year of construction1970 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket5 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor6.6 KW Specified Features - Paddle dryer Paddle dryer(1x) Capacity4000 Ltr Trough sizesdia. 1400x3000mm Outletdia. 350mm With jacketcheck External heating spiral(180 Ltr) Shaft can be heated(1020 Ltr) Max. temperature-10/+200 Degr. C. With adjustable packing glandscheck Motor6,6 KW, 500 Volt (Ex) MaterialStainless steel Information ATEX compatiblecheckCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPaddle dryersAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered food ...

General SKU035T171 LocationBarneveld Material Housing materialStainless steel Rotor materialStainless steel Main Features MaterialStainless steel Motor2.2 KW Inlet diameter400 mm Specified Features - Rotating valve MaterialStainless steel Rotary valvecheck Rotor diameter400mm Rotor width480mm Inletdia. 400mm Inlet flange sizesdia. 540mm Outletdia. 400mm Outlet flange sizesdia. 540mm With motor2,2 KW, 230/400 Volt Rotor speed± 36 Rpm Information Floorspace1,2x0,6 M Total height0,6 MDiscountRotating valves-DiscountRotary valves > Rotating valvesBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU404U1219 MakeAlbi Alois Binderberger LocationBarneveld Pressure Working pressure0.99 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor3 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4000 Ltr. Vessel sizesDia. 1800x2460 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN25(2x) OutletDN50 Half coil jacketedcheck (100 Ltr.) With paddle stirrercheck Motor3 kW, 380/660Volt, 1400/103rpm Speed mixing shaft103 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) Information No.767 Year of construction1986 Floorspace1,85x1,85 m Total height2,46 m Weight±2500 kgCatalysts & fillersPaper & otherSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsSugarLubricants & ol ...

General SKU116S444 MakeHaagen & Rinau TypeHRT-4000 No.8894086, Vessel 44852/1 Year of construction1990 Mounted on framecheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4660 Ltr. Motor55 KW Specified Features - Paddle dryer Paddle dryer(1x) Capacity4660 Ltr. Trough sizesdia. 1450x3350 mm Manholedia. 500 mm With jacket(300 Ltr.) Shaft can be heated(420 Ltr.) Max. temperature250 °C With mechanical sealcheck Motor55 kW, 167-500 Volt Speed mixing shaft1,89-5,68 rpm MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld Floorspace6,5x1,8 m Total height2,7 m Weight± 16.500 kg (incl. drive unit)Catalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & ino ...

General SKU345S744 MakeKresta Anlagen- Stahl- und Montagebau GmbH (AT) No.94146-6 Year of construction1994 Mounted on legscheck Pressure Working pressure3.2 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor1.3 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity4000 Ltr (5500 Ltr) Vessel sizesDia: 1800 x2895mm Conical bottomcheck Dished top sidecheck ManholeDN600 Top connectionsDN150, DN50, DN40, DN25 OutletDN50 With jacketcheck(600 Ltr) Max. temperature-10/200°C With propellor stirrerHWL-040-L Motor1,3 KW, 230/400 Volt (EX) Speed mixing shaft484 rpm Information LocationBarneveld Floorspace2,21x2,21 m Total height4,1 m Weight3000 kg ATEX compatiblecheck Extra Specificationswith TÜVCatalysts & fillersSolventsStainless Steel React ...

General SKU026W131 MakeDrais TypeKT-400 Year of construction1991 Mounted on framecheck Main Features MaterialStainless steel Volume400 Ltr. Motor18.5 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Continuous mixercheck Capacity400 l. Trough sizesø 600 x 1450 mm Inlet250 x 300 mm Top connectionscheck 4x Inspection hatch400 x 370 mm Outlet290 x 250 mm With adjustable packing glandscheck Motor11,0 kW (380 V, 1450 rpm) Speed mixing shaft100 rpm With lump breakercheck Motor7,5 kW (380 V, 2780 rpm) Speed lumpbreaker2870 rpm MaterialStainless steel Information LocationBarneveld Floorspace2,8 x 1,5 m Total height1,7 m Weight1640 kgCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesPowder turbo mixersOther chemicalSt ...

General SKU310N454 MakeGebrüder Lödige Maschinenbau GmbH TypeK-TM 400 No.15383 Year of construction2004 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Motor15 KW Specified Features - Powder turbo mixer MaterialStainless steel Lödige mixercheck Continuous mixercheck Capacity400 Ltr Trough sizesdia.500mm x2000mm Inletdia.200mm Top connections(1x)dia.80mm, dia.45mm Inspection hatch(2x)500x350mm Outlet300x280mm Glands air purgedcheck Motor15 KW Speed mixing shaft117 rpm With lump breaker(only 2x connectionflange) Information Floorspace4,3x0,8 Total height0,9MCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicSpicesPowder turbo mixersOther chemicalStarchTea, herbs & coffeeGeneric medicinesPowdered foodsLoedigeIndustries > C ...

General SKU107W542 MakeVevey S.A. No.256 Year of construction1963 LocationBarneveld Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryer(1x) Capacity4000 Ltr Trough sizesdia. 1400x3000mm Manhole± 400x250mm (2x) With jacketcheck Shaft can be heatedcheck With adjustable packing glandscheck Motor± 15,0 KW MaterialStainless steelCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicPaddle dryersAgrochemicalsBiotechnologyOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsVeveyIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesDiscountIndustries > Pharmaceutical > Other pharmaceuticsIndustries  ...

General SKUR0403 LocationBarneveld Main Features MaterialMild steel Volume4000 Ltr. Motor18.5 KW Specified Features - Conical mixer Conical mixercheck Capacity4000 ltr Largest cone diameter2500mm Cone height3800mm Manholeca 1800x700mm Top drivecheck Motor18,5 kW 380 Volt Motor0,55 KW 380 Volt (78rpm) Cantilevered screwcheck Bottom dischargecheck MaterialMild steel Information MakeHeilig Type4000 SVD Floor space2,9x2,9 M Total height5,0 M Weight5000 Kg Extra Specificationsoutlet with ball valve screw stainless steel Feed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicPlastic & polymersConical mixersOther chemicalStarchFine chemicalsGeneric medicinesPowdered foodsPaints & coatingsHeiligIndustries > Food & Feed > Feed additivesIndustries > Pharmaceutical > Other pharmaceuticsIndustri ...

General SKUR1205 MakeJeger AG (CH) LocationBarneveld Type4000 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4420 (4000 ltr nett) Vessel sizesdia. 1800x2000mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsdia. 50mm (4x) dia. 300mm (1x) Outletdia. 80mm Half coil jacketed(90 Ltr) Max. temperature-30/200 degr. C With propellor stirrercheck Motor2.0 kW 220/380 Volt (Ex) Speed mixing shaft203 rpm. Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) Information No.5653 Year of construction1992 Floorspace2.4x2.4 M Total height3,2 M Weight1600 Kg ATEX compatiblecheckCatalysts & fillersSolventsStainless Steel ReactorsDetergent & surf.Other pharmaceutic ...

Overview This roll-fed hot glue labelling machine was manufactured by ACMI (Italy). The Opera PRO 400 RF is designed for high-capacity beverage production lines, processing both cylindrical and shaped containers in glass or PET. It applies wrap-around OPP labels at very high speeds, ensuring excellent efficiency and reliability. The machine is equipped with modern features such as automatic label splicing, brushless motor-driven infeed screws, and remote assistance capability. It is currently available for sale. Technical data  Capacity: Nominal 48,000 bph (max. mechanical speed: 58,000 bph) Formats: Cylindrical and shaped containers, PET or glass, e.g. 500 ml PET round bottle (wrap-around OPP label) Machine diameter: 1,320 mm Pitch: 125.60 mm Label type: Roll-fed OPP hot glue wrap-around labels (30–40 µm thickness, 30–175 mm height) Platform rotation: Motorized belt (R version) Ma ...

Litz LU 400Year of manuf. : 2016 Control : Heidenhain TNC 640 Speed : 12000 rpmMovement X/Y/Z : 400/350/350 mm____________Description:Spindle:Technology:DirectdriveSpeed:12.000 rpmPower (max.):13 kWTorque (max.):95 NmTaper:SK40NC-Swivelroundtable:B-Axis:-50°/+110°C-Axis:360°C lampingsurface:ø450 mmTableloading (max.):200 kgIn general:Toolmagazine:48 StationsRapid travers in X/Y/Z:48 m/minEquipment/Accessory:Positionsensor:Direct Scales in X/Y/ZChipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with filter and High-pressure, 30 barWorkpiecemeasurement:Touch probe, Heidenhain TS740Toolmeasurement:Laser, Renishaw NC4 TXSetup operations:Electronic HandwheelFurther Equipment:SpindlechillerFurther Accessory:Misc. used Toolholder

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

AddUP AddUP BeAM Modulo 400Year of manuf. : 2022 Control : Siemens SINUMERIK ONE NCU 1750 ____________Description:In general:System:Industrial DED systemSafety:Vacuum lock and inert gas purgingYear of manufacture:2022Weight:approx. 7,500 kgGeometry:Number of axes:5-axis kinematics with automatic tool changerTravel ranges (x/y/z):650×400×400 mmTable diameter:400 mmTable load capacity (max.):100 kgMeasurement:Renishaw probeLasers & Optics:Laser:Dual IPG laserFine machining:500 W (IPG fiber laser, 200 µm fiber)High build-up rate:2000 W (2 kW) (IPG fiber laser, 600 µm fiber)Optics:Precitec YW 30 optics with VX10/VX24 nozzles for standard and micro claddingControl unit:Control:SINUMERIK ONE NCU 1750 (SW 6.14) on a 24 SIMATIC touch panelProcess preparation:Via Siemens NX CAM and edge computing (IPC 427e)Monitoring:Live process control via HMI Display Manager and sensors for t ...

This piston pump is ideal for well drainage or dewatering work , 2 pieces in stock. NEW and unused. Directly usable, , Throughput capacity: 30 m3/h, Max. head: 22 MWK, Max dirt passage: 1500 rpm, Weight: 625 kg, , = More information =, , Year of manufacture: 2026, Empty weight: 625 kg, Connector size: 4 inch, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a cal ...

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : OH0110 : 230 € : 1 : 17 mm : 600 mm : 400 mm : 110 mm scraped surface 2 T-sluts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 31080 € : 593.63 € : 0.4 - 3 mm : 400 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Distance between the centres ( mm) 755 Type cnc Stroke ( X/mm) 230 Stroke ( Z/mm) 700 Number of spindle per minute mm 1 ' 20 Number of inserts in the tool magazine 12 Bar passage ( mm) 64 Chuck connection din 55026 a2-6” Hole diameter in the chuck (mm) 76 Sleeve diameter ( mm) 95 Machine Conditions ce marked

turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...

x-travel:560 mm y-travel:560 mm z-travel:660 mm control:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/min spindle drive:25/ 35 kW max. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mm Tool diameter with no neighbouring tools:170 mm tool length - max.:450 mm weight of tools max.:12 kg numbers of pallets:2 Pallet dimension:400 x 400 mm max. workpiece diameter:630 mm workpiece height max.:900 mm table load:400 kg rapid travel x/y/z:60 m/min Feed x/y/z:60 m/min internal coolant system feed:70 bar weight of the machine ca.:8,5 t dimensions:3200 x 4800 x 2900 mm Renishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spind ...

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - tool weight max.:100000 kg - number of T-slots:12 - distance between T-slots:375 mm - height above floor level:390 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm - number of T-slots:12 - distance between T-slots:375 mm - stroke:2900 mm - tool weight max.:50000 kg RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:180 mm/s - working velocity max.:50 mm/s - restoring force of ram:95 to TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage be ...

pressure:1000 t table length:4000 mm table width:1600 mm Controls:SIEMENS S7-1500F PRESS DESIGN:. - frame design : Transfer press :. - Drive type : mechnical :. - openings in uprights : yes :. - opening in table : yes :. - moving bolster : yes :. - number of tables:2 PRESS FORCES:. - total force (nominal):1000 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):1600 mm - height above floor level:600 mm - autom. tool clamping device : yes :. RAM:. - stroke:400 mm RAM (MECHAN. PRESS):. - ram adjustment:300 mm - ram adjustment:100 mm - number of strokes min:8 /min - number of strokes max:50 /min - hydraulic overload protection : yes :. TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):900 mm - shut height (stroke down, adjustment up):766 mm - distance between columns (H-frame):4250 mm - Free passage between side c ...

rotor dia:30-500 mm hobbing length:500-1000 mm total power requirement:80 kW weight of the machine ca.:15 t dimensions of the machine ca.:3,6 x 2,5 x 3,0 m max. module:8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel

turning diameter:760 mm turning length:1.524 mm spindle speeds::3.300/12.000 MILL/3.300 spindle diameter:78/78 mm no. of tools in magazin:80 tool taper:Capto max. tool length:400 mm max. tool diameter:125/90 mm weight of the machine ca.:13,4 t Machine with Mazak Matrix CNC control Main and counter spindles Milling unit (milling spindle) Kitagawa QJ-312 dual-action chuck Pallet pool with robot IKZ Exhaust system not included

turning diameter:830 mm turning length:4.000 mm turning diameter over bed slide:540 spindle bore:130 mm turning speed range:2 - 1.600 U/min rapid speed:4/5 m/min feed speeds:1 - 2.000 mm/min total power requirement:55 kW dimensions of the machine ca.:7 x 2,2 x 2 m weight of the machine ca.:7,5 t

x-travel:1190 mm total power requirement:25 kW feeds::3 - 2000 mm/min weight of the machine ca.:4,3 t table-size:1600 x 400, 5 Spannbacken mm dimensions of the machine ca.:4000 x 3600 x 2200 mm speeds:45 - 1800 U/min y-travel:530 mm z-travel:540 mm tool taper:ISO 50 control cabinet:940 kg

x-travel:500 mm y-travel:250 mm z-travel:325 mm table-size:400 x 200 mm T-slots:10/ 20 mm T-slots:4 St workpiece height max.:300 mm template table:380 x 380 mm speeds::2500 - 20000 U/min no. of turning speeds:3 total power requirement:0,25 kW weight of the machine ca.:430 kg dimensions of the machine ca.:1000 x 1200 x 1500 mm

saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden

x-travel:600 mm y-travel:580 mm z-travel:580 mm numbers of pallets:2 pallet size::400 x 400 mm max. workpiece weight:400 kg spindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/min rapid speed:50 m/min total power requirement:25 kW weight of the machine ca.:12 t dimensions of the machine ca.:3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders