mikron 400 u used for sale

Core diam.: 230 mm // Material Type: Cardboard, pvc, pp , pe and hdpe cores

Voltage 380 V Power 3 kW Pipe Ø min. 63 mm Pipe Ø max. 400 mm Dimensions (LxWxH) 4400 x 1600 x 2600 Mm Weight 1580 kG Including universal clamps Be Udevlxt Ue Dvycjww

Longitudinal sealing: continuous, photo cells: horizontal/vertical, working height range: 760mm-960mm, max. transport speed: 30m/min, film core diameter: 76mm, max. film roll diameter: 350mm, max. film roll width: 650mm, sealing stamp width: 300mm, product width range: 50mm-410mm, product height range: 1mm-250mm, min. product length: 50mm, film thickness range: 7µm-80µm, max. output rate: 85cycles/min, materials: POF/PE/PVC/PLA/bio films. Machine dimensions X/Y/Z: approx. 2200mm/1700mm/1800mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Brand: SICA Type of Machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacturing: 2000

Table 6000 x 3000 x 400 mm Thickness: 400 mm Length: 6000 mm Large: 3000 mm Weight: 22 ton

Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

Specifications: Manufacturer: Pressta-Eisele Type: Norma 400 TU/4 Year of Make: 1996 Saw blade diameter: 400 mm Cutting length: 4,000 mm Saw motor Speed: 2,890 rpm Power: 4.5 kW Dimensions and weight Weight: 625 kg Condition Condition: Used Functional: Tested and fully functional

General SKU362T1083 MakeBAV Maschinenbau GMBH LocationBarneveld TypeBHV/400 Main Features MaterialStainless steel Volume400 Ltr. Motor18.5 KW Rotor150 mm Specified Features - Processing vessel Continuous reactorcheck Rotor sizesDia. 150x220m InletDN125 OutletDN 65, DN 40 Number of stages:1 Max. temperature10/90 °C Motor18,5 kW, 400 Volt With frequency controllercheck With vesselcheck CapacityBruto: 400 Ltr. , Netto 330Ltr. Processing vessels MaterialStainless steel 1.4571 (316Ti) General No.R07-268 Year of construction12/2007 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,5x2,5 m Total height2,5 m Weight1480 kg Extra SpecificationsUnused after reconditioningOintmentsProcessing vesselsBiotechnologyPlastic & polymersCosmeticsDetergent & surf.Food additivesLubricants & oleoConfectioneryBiopharmaceuticalAPIGeneric medicinesBAVIndus ...

General SKU381T1144 MakeTerlet LocationBarneveld Pressure Working pressure jacket4 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor2.2 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity4000 Ltr. Vessel sizesø 1700x2080 mm Manholeø 500 mm Outletø 150 mm With jacket52 Ltr. Max. temperature100 °C With paddle stirrercheck Motor2,2 kW 380-420/660-725 Volt Speed mixing shaft52 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General No.91.0304 1 Year of construction1991 Mounted on legscheck Floorspace1,8x1,8 m Total height2,9 m Weight1080 kgOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsCosmeticsDetergent & surf.Other pharmaceuticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectio ...

General SKU344U849 MakeNovartis Services AG LocationBarneveld Pressure Working pressure1 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume400 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel Capacity400 Ltr. Vessel sizesDia: 800x800 mm Dished topcheck Dished bottomcheck ManholeDN500 Top connectionsDN25(2x), DN15 OutletDia: 25 mm Max. temperature50°C MaterialStainless steel 1.4435 (316L) General No.470 Year of construction1997 Mounted on legsWith wheels Floorspace1,3x0,9 m Total height1,2 m Weight170 kgPressure vesselsFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersCosmeticsOther pharmaceuticsAnimal feedAPIGeneric medicinesService AGTanks > Pressure vesselsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemic ...

General SKU418W1323 MakeGab Neumann LocationBarneveld TypeG3-400/250/80-4/10-D Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface2.48 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface2.48 m² Tube capacity17 l. Max. temperature-30°C/+80°C Shell capacity17 l. Shell diameter500 mm Shell length615 mm Max. temperature-30°C/+180°C Shell connections2x dia. DN50, MaterialGraphite With jacketcheck General No.15754-12721 Year of construction1985 Floorspace0,70x0,70 m Total height1,50 m Weight340 kg Technical specs Extra informationVolume 17 l., allowable pressure-1/+3 bar, allowable temperature-30°C/+180°COintments ...

General SKU345X792 MakeFryma TypeVME-400 LocationBarneveld Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume480 Ltr. Motor6.8 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity480 l. Vessel sizesDia. 1000x900 mm Dished bottomcheck Flat top sidecheck With covercheck ManholeDia. 900 mm Top connectionscheck OutletDN25 + DN80 With jacketvolume 61 l. Max. temperature150°C With anchor stirrercheck With dissolver stirrer6,8 kW, 380 volt, 1485 rpm, (Ex) Motor… kW, 380 volt With homogenisercheck Motor5,5 kW, 380 volt, 2910 rpm, (Ex) MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L) With jacketcheck General No.M11362 Year of construction1985 Mounted on legsin frame With switchcheck Floorspace1,35x2,00 m Total height2,30 m Weight1900  ...

General SKU200W003 MakeInotec TypeReblend tank No.IN110/15037 Year of construction2015 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity400 Ltr. (4x) total 1600 Ltr. Vessel sizesDia. 800x1000 mm Dished topcheck With covercheck Dished bottomcheck OutletDia. 65 mm Max. temperature100°C MaterialStainless steel 1.4401 (316) General With switchgear( as is) Floorspace4,30x1,25 m Total height2,30 m Weight1000 kg CEcheck Extra SpecificationsStainless steel mounted dosing systemyear of construction 2015, CE, volume 4x 400 ltr, stainless steel 316L, design temp 0-100ºCwith Endress+ Hauser flow meters, Indi flow valvesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersVertical tanksCatalysts & fillersFeed additivesSolventsCosmeticsDetergent & s ...

General SKU388X975 MakeQuattro Fluid Systems TypeQuattro flow 4000 S Mach.No.4174 Year of construction2007 Pressure Working pressure4 Bar Main Features MaterialStainless steel Motor2.2 KW Specified Features - Diaphragm pump Pumpcheck Number of pumps:1 Capacity60-4000 lph With motor2,2 kW, 400 volt With frequency invertercheck InletDN35 OutletDN35 Diaphragm pumps MaterialStainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) General LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace0,95x0,45 m Total height1,10 m Weight80 kg CEcheckDiaphragm pumpsFine chemicalsOther chemicalBiotechnologyCatalysts & fillersFeed additivesCosmeticsDetergent & surf.DairyBiopharmaceuticalAPIGeneric medicinesPaints & coatingsQuattro Fluid SystemsPumps > Diaphragm pumpsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > ...

turning diameter over bed: 800 mm turning diameter over slide rest: 540 mm turning length: 4000 mm centre height: 400 mm centre distance: 4000 mm spindle turning speed range: 9 - 1140 U/min weight of the machine ca.: 8,0 t - with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU300U577 MakeFeutron Klimasimulation GmbH LocationBarneveld CEcheck TypeKlimaprüfkammer KPK 400 Main Features MaterialStainless steel Volume400 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying ovencheck Climate boxcheck Max. temperature+5/100 °C Capacity400 Ltr. Internal width720 mm Internal depth620mm Internal height860 mm Electric heatingcheck Electric capacity6,3 kW Number of doors:1 With air circulationcheck With fancheck Motor0,18 kW 220/230 Volt With air humidificationcheck With cooling compressorcheck With trays(3x) MaterialStainless steel 1.4301 (304) General No.004 Year of construction2002 With switchcheck Floorspace1,2x1,4 m Total height2,3 m Weight600 kg Extra SpecificationsClimate Range: 10…95 °CTemperature Tolerance: (0.2…0.5)KHumidity Range: 10…98% relative humidityHumidity Tolerance: (2…3)% relative humi ...

Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors

Included hydraulic-unit and control panel build in container. With conveyor for outlet.

General SKU354T1034 LocationBarneveld MakeKtron Main Features MaterialStainless steel Motor1.1 KW Inlet diameter370 mm Specified Features - Metering screw Metering screwcheck Screw diameter42mm Pitch31mm Screw length700 With hoppercheck Hopper sizes370x370x370 Inlet370x370mm Outlet44mm With motorcheck With DC motor0,55kW, 180Volt, 1800rpm With breaking/mixing shaftcheck Motor0,37kW, 220/380Volt, 1390rpm Metering screws MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General TypeS-400 No.240-739 Year of constructionunknown Mounted on framecheck With switchgear(as is) Floorspace1,15x0,65m Total height1,8m Weight200kg Extra Specificationsktron features additional transport/mixing screw.screw Dia: 77mmscrew Dia: 50mmscrew Length: 480mmscrew Shaft Dia: 22mmproduct Exhaust: 80x80mmmotor data: 1.1kW, 220/380Volt, 2820rpmpropeller is equipped  ...

Size: 1.800 x 4.000mm - Year of Manufacture: 1998 - With Electrical motor (11 kW/6), Cardan shaft and springs - Will be overhauled, sandblasted and painted.

General SKU225T219 MakeAlfa Laval LocationBarneveld TypeTV Main Features MaterialStainless steel Volume400 Ltr. Motor0.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity400Ltr. Vessel sizesDia:1000x1200mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia: 420mm Top connectionsDia: 50mm (3x) OutletDia: 80mm With paddle stirrercheck Motor0.55kW, 220/380Volt, 1380rpm Speed mixing shaft102rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) General No.PH 139576 Year of construction1982 Mounted on legscheck Floorspace1,3x1,2m Total height1,8m Weight350kgOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsCosmeticsDetergent & surf.Other pharmaceuticsFood additivesSugarLubricants & oleoDairyAni ...

grinding length: 400 / 500 / 600 mm grinding width: 200 / 300 mm workpiece height: 300 / 350 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU373X905 MakeMeidinger AG TypeDFV 4000-DSF 10 No.172557/5 Year of constructionunknown LocationBarneveld Pressure Pressure buildup0.056 Bar Main Features Capacity0.31 m3/Min Motor2.2 KW Pressure0.056 Bar Specified Features - Blower Blowercheck Capacity19m³/h Motor2,2kW (400 V, 2850 rpm (Ex)) InletDN50 OutletDN50 Materialstainless steel aisi aws316l 1.4430 General Floorspace0,8 x 0,6 m Total height1,0 m Weight190 kgOintmentsBlowersTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsCosmeticsDetergent & surf.Other pharmaceuticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicGeneric medicinesPowdered f ...

Pefra Tarpaulin Trailer Type 4-RL Model 4000 Manufacturer: Pefra Type: 4-RL Model No.: 4000 Vehicle Identification No.: 45780-1535 Dimensions: 7500 × 2480 mm Payload: 8500 kg Net weight: 2600 kg Version: Trailer with tarpaulin Condition: used Accessories: 2 spare wheels (worn) Quantity available: 2 pieces Location: Hagenbach

Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 15,480 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile size: C 80 x 50 x 15 x 3.5 Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) Height: 5,400 mm Depth: 1,100 mm 30x Pallet rack crossbar, used Material colour: grey IPE profile: 100 x 55 mm Agraffe: 3 HK (hook) Clear width: 3,000 mm 60x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Finish: Carbon s ...

Key data: 400 mm, 4800 mm, 870 mm

Metora MBS 400 - Metal Band Saw - Hydraulically controlled lowering of the saw frame - Hydraulic raising of the saw frame - Mounted on turntable Specifications - Capacity: 400 mm - Working height: 870 mm - Saw blade dimensions: 4800 x 34 x 1.1 mm - Motor power: 3.2 kW - Machine dimensions WxHxD: 2600 x 1550 x 1200 mm - Weight: approx. 1300 kg

Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW

Sanding belt length 2200 mm, sanding belt width 400 mm, table length 1200 mm, usable height 120 mm, sanding width 390 mm, sanding belt speed approx. 21 m/sec, feed speeds 6 - 11 - 16 m/min, drive motor 7.5kW, feed motor 0.26 - 0.55 - 1kW, pneum. Belt oscillation and belt blow-out, incl. landing gear

Key data: 650 mm, 1500 mm

Year of construction 2014, commissioning 2017 OSP P300S Controller Travel: X1/X2 axle: 695/235 mm Y-axis: 300 mm Z1/Z2 axle: 1,600/1,461 mm B-axis: -30° to +210° Max. turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, Max. torque: 955 Nm, bore 112 mm Hollow Clamping Cylinder SMW VNK320-127, Bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 tool positions, HSK-A63 Lower turret with 12 tool stations Self-centered bezel on the lower turret Hydraulic bezel SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP Probes Drum trough filter TMF300 with 980 L tank 8 bar circulation pump 70 bar high pressure pump Hinge belt chip conveyor Tool monitoring system for tool life and breakage Tool measur ...

Universal CNC lathe INDEX G 400 RATIO Line Hersteller [manufacturer]: INDEX Type [ type]: G 400 Control unit: Siemens C200-4D incl. milling of cylindrical tracks Incl. handwheel Baujahr[construction year]: 10/2004 Turning length 1250 Main spindle D102 with swing-in gear 1700 Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE TOOL CARRIER 1 COMPL. AXES X,Y,Z,B with turning/milling operation Disc turret VDI40 10 stations MILLING SPINDLE HSK A63 Tool carrier axles 2 XZ Disc turret VDI40 10 stations SUB-SPINDLE D102 DIRECT DRIVE 1300Nm Size 11 Hollow Clamping Cylinder 102 ARB-SPI ALIGNMENT. AND SWITCHING DEVICE DISC MAGAZINE ON THE LEFT OF THE HSK63 SINGLE-SWING GEARBOX WITH 32 TOOL HOLDERS DISC MAGAZINE RIGHT COMPL. M.32 TOOL HOLDERS HSK 63A Travel path: X= 320mm Z=1250mm Displacement measuring system X-axis glass mast. (abs) Fe ...

ABB SDS 100 Servo Drives SDS102-069A0-400V00-0000 3ADT211027R0001 46kW overhauled by the manufacturer Output 670V DC Input 380-400V AC 39 kg Very large selection of ABB Servo Drive. Our equipment has all been overhauled. See pictures. Devices are shipped regardless of the date of refurbishment. Please note that the colors on your screen may differ slightly from the original colors. H1R1a23 More items - new and used - can be found in our shop! International shipping costs on request!

A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible.

Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.

Transnorm Belt conveyor 1880-400-300 RA1391 Manufacturer: Transnorm Type: TS 1200 belt conveyor Year of manufacture: 1996 Condition: good (used) Motor: fully functional conveyor length (FL): 1880 mm nominal / external width (NB): 400 mm belt width (GB): 300 mm Motor type: SEW gear motor Motor power: kW 0.37 220-240V Conveyor speed: 1.05m/s, adjustable conveying speed with frequency converter also possible at extra cost Drive: head drive Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: good (used) Conveying length in mm: 1880 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,10 scope of delivery: without supports and side guides For individual, professional advice, simply get in to ...

• Machine set up for ampoule labelling • With new format sets, also suitable for cylindrical objects such as vials or cartridges • Suitable for ampoules of 1, 2, 3, 5, 10, 20, 30 ml • Output: 12,000\endash27,000 ampoules/hour • Label processing range: min. 25 x 10, max. 110 x 78 mm • Label roll diameter 400 mm • Inclined belt infeed magazine for cassette filling • Label presence check with luminous sensor • Allen hot printing device, type holder 5 lines • Scanware camera for 100% print control • Scanware camera for colour ring control • Automatic reject ejection with counter-check • Inline outfeed to downstream tray packaging/cartoning machine • With format sets for 1, 2, 3, 5, 10, 20 ml ampoules in accordance with DIN EN ISO 9187-1 • Modem for remote monitoring • Electronic batch protocol with audit trail • 21 CFR Part 11 compliance • Beckhoff service ...

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Rectangle: 200 x 80 or 150 x 70 mm mitred at 45° rectangular/flat: 150 x 70 mm Portrait: 100 x 60 mm 2 cutting speeds by pole-switchable motor: 19 and 28 m/min Feed speed hydraulically infinitely variable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Space requirement: 1200 x 1100 x 1620 mm

A paper filling system for dispensing packaging paper is available. Speed: 85m/min, operating modes: 3, grammage: approx. 50g/m²/70g/m². Machine dimensions X/Y/Z: approx. 910mm/910mm/1650mm, weight: approx. 25kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The image is a sample unit.

Several air cushion machines activaTec are available. Production speed: 15m/min, film thickness range: 13mm-40µm, roll length: 700m/1500m. Machine dimensions X/Y/Z: approx. 315mm/300mm/315mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture shows an example unit.

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

Year of manufacture 2005 4 drum feeders TAS (standing) 2 drum feeders TAL (horizontal) 1 UFA 400 transfer feeder Stapler ST 400 4 staple heads 2 eyelet stitching heads Three-knife trimmer TR 400 Medium-cut device Compensating stacker Gämmerler BL 408 Price on request. Worldwide delivery & installation.

connected load frequency: 230 V dimensions: 1,6 x 0,8 x 1,55 mm weight: kg Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic

Height=1.36 m, Overall length= 1.72 m, Overall width= 0.74 m, Net weight= 193 kg,

Height=2.31 m, Overall length= 3.62 m, Overall width= 0.82 m, Net weight= 504 kg,

Dimensions (L/W/H): 2700x1400x1750 mm Weight: 1800 kg Total power requirement: 5 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1500x1295x1300 mm Weight: 1500 kg Total power requirement: 16,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x600x500 mm Weight: 60 kg Total power requirement: 0,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x900x1700 mm Weight: 1900 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1900x1000x1250 mm Weight: 800 kg Total power requirement: 12,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.