mikron 400 u used for sale

Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible.

Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.

Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps.

Max. pipe diameter: 400mm, power: 2.9kW, max. pipe thickness: 6mm. Documentation available. On-site inspection is possible.

A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible.

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible.

: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mm serial number: 109967 volt: 380 V frequency: 50 Hz weight of the machine ca.: 500 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca 1990 fabric-no.: 42965 : x-travel: 500 mm y-travel: 400 mm quill stroke: 300 mm weight: 3,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 28043 weight: 3 t pressure: 30 t volt: 380 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm miter: . : Kühlung weight of the machine ca.: 1 t number: 4 Stück The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibration tester for Electronic devices. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...

max. width of grinding wheel: 50 mm ratio: 0 max. dia. of grinding wheel: 400 mm total power requirement: 3 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: m Pre-Dressing Device for Gear Grinding Wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 650 mm y-travel: 450 mm workpiece height: 585 mm Control: ADCOS CNC 400 total power requirement: 15 kW weight of the machine ca.: 5000 kg dimensions of the machine ca.: m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____________________________________________________________________ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Dista ...

max. wheel diameter: 400 mm gear width: 280 mm max. module: 1 min. module: 4 total power requirement: 15 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 6 total power requirement: 25 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 250 mm total power requirement: 0 kW weight of the machine ca.: 0,250 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 75 mm max. module: 0,5 min. module: 60 total power requirement: 25 kW weight of the machine ca.: 7 t dimensions of the machine ca.: m L O R E N Z (Germany) High Performance Automatic Gear Shaper Model LS 400 Year 1975 Serial No. 12 592 ______________________________________________________________________ ___________ External gear, max. Ø 400 mm (possibly larger) Internal gear dia. 350 mm Gear width, max. 75 mm Module range 0.5 - 6 Length of stroke 82 mm Adjustment of stroke position 0 - 100 mm Distance between shaper spindle and machine body 250 mm Spindle taper MK 5 No. of strokes, roughing/finishing process 118 - 1,000 per min Table size 400 mm Table bore 125 mm Mounting height between table and shaper head 190 / 290 mm Axial travel of tool slide, approx. 295 mm No. of teeth, approx. 12 ...

buckles: 4 knives: 0 max. paper size: 42 x 63 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,8/2,2 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,5 x 1,78 x 1,3 m ACTION PRICE ! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Sa ...

clamping range of chuck: 120 - 380 mm height: 95 mm daylight: 170 mm external diameter: Futter 400 mm external diameter: Spannhebel 600 mm weight: 26 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

measuring length: bis 4000 mm Tube length: 4280 mm numbers of toolholders: 5 : Rohr Edelstahl dimensions: 4,3 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 280 mm turning length: 1000 mm turning diameter in the gap: mm turning speeds: 70 - 2000 U/min centre height: 195 mm spindle bore: 54 mm tailstock quill taper MT: 3 MK connected load frequency: 400 V total power requirement: 2,2 kW weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1,95 x 1,0 x 1,75 m Professional industrial machine 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 310 mm capacity 90 degrees: square: 280 mm : 400x250 saw band length: 4020x34x1,1 mm band speed: 18 - 100 m/min table height: 890 mm total power requirement: 2,2 kW weight of the machine ca.: 0,99 t dimensions of the machine ca.: 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters suc ...

impact length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 137 kg length in width: 620 mm length in total: 4400 mm Roller conveyors including stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roller conveyor length: 4000 mm Weight of Material maxium: 300 Kg/m Wheel width: 350 mm roll diameter: 60 mm work height adjustable: 840 - 950 mm weight: 110 kg length in width: 620 mm length in total: 4000 mm Roller conveyors without stop system. Stable execution. are available from 2 to 6 meters in length. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible.

Suitable for cleaning cooling oil used in carbide grinding. Accessories: 6 filter towers, automatic backflushing, magnetic separator., container content: 4000 l , Flow rate max: approx. 360 l/min., Filter fineness:: greater than 0.003 mm, Connected load approx.: 9.0 kW (400 V / 50 Hz), Dimensions W x D x H: 6000 x 1200 x 1650 mm, Weight approx.: 2000 kg, colour: light grey

A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.

An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.

A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible.

Input voltage (+/-15%): 3 x 400V, output voltage (+/-15%): 3 x 0V-400V, input frequency: 50Hz-60Hz, power: 0kW-200kW, output frequency: 0Hz-200Hz, rated current: 72A. Overload capacity: 1.2: 60A, 42kVA, 30kW, 1.5: 45A, 31kVA, 22kW. Voltage: 265V, frequency: 195Hz, initial voltage: 13.6V, initial frequency: 0Hz. Dimensions X/Y/Z: approx. 2100mm/800mm/500mm. Documentation available. On-site inspection is possible.

surface area: 620 300 mm no. of flutes: 6 groove width: 14 mm total power requirement: 0 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Path width: 1600mm, processing position: 50mm-1500mm, processing heads: 10x longitudinal scribes, longitudinal scribe line width: 50µm-100µm, laser power per head: under 40W. Laser head L400: wavelength: 10.6µm, output power: 400W, power stability: +/-2%. Machine dimensions X/Y/Z: approx. 3000mm/4500mm/4000mm, weight: approx. 5000kg. Including cooling unit PC 080 and supply cabinet. Retrofitting with 4x cross scoring is possible. Documentation available. On-site inspection is possible.

Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible.

longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

longitudinal travel: 400 mm cross travel: 160 mm table length: - mm table width: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 700 mm table width: 400 mm x-travel: 450 mm y-travel: ? mm total power requirement: 0 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,210,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 400 mm width: 150 mm total power requirement: 24 V weight of the machine ca.: ? t dimensions of the machine ca.: 800 150 180 m Sine table with 24 V electromagnetic plate, swivelling over the longitudinal axis The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 600 mm control: Turn Plus CNC Pilot 3190 total power requirement: 44 kVA weight of the machine ca.: 5 t dimensions of the machine ca.: 6 2,5 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 - 1600 mm y-travel: 250 - 800 mm z-travel: 350 - 800 mm Control: CNC weight of the machine ca.: 1,6 - 16 t dimensions of the machine ca.: - m MAHO - Package from stock clearance - Special price for sale 4 x milling machine -MAHO MH 400 C - CNC 432 -MAHO MH 700 C - CNC 432 -MAHO MH 800 T - CNC 332 -MAHO MH 1600 S - CNC 432 EXW - Ex works Bensheim / Lorsch Free lorry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

: 3000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 12 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 400 mm plate thickness: 4 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.5x1x2.2 m www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

400 m pallet rack STOW, as good as new Features • Colour: Galvanised frame / yellow beam •Ultimate load: o Bay load: 12,000 kg o Shelf load: 2,400 kg per level/evenly distributed load + 145 pcs. frame, height approx. 11000 mm, depth 1100 mm + 1440 pcs beams 2700 mm length, 2400 kg additional load/with evenly distributed load + 2880 pcs of suspension safety devices + 2160 pcs. insert wire mesh 875 x 1115 mm, mesh size 50 x 112 mm, 500 kg load capacity per grid + 580 concrete anchors M12 x 110 mm for fastening Price / 79.900,- € net excl. VAT • Other heights and quantities on request • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at a ...