mikron 400 u used for sale

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Manufacturer: Butler Model: Elgamill TE 4000 Condition: Used Type of Machine: Horizontal Bed-Type Milling Machine Plate Size: 4340 × 1000 Table Size: 1000 × 1000 Control System: Siemens 810 M Spindle Hub: 480 × 360 Tool Holder Spaces: 130 Travel (X, Y, Z): 4000 × 1600 × 1000 Max Weight: 10500 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dematic incline belt conveyor 10300-500-400 RA2347 Conveyor length (FL): 10300 mm (800 mm forward run, 8400 incline segment and 1100 mm arch) Outer width/nominal width (NB): 500 mm Outer width/nominal width with motor: 750 mm Belt width (GB): 400 mm Profile height: 135 mm Climbing belt with curved section Infeed conveyor with overdrive Arched section with 2 adjustable bends Rubberized drive drum Drive: SEW 400 V 0.55 kW Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) Conveying length in mm: 10300 (800 + 8400 + 1100) Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung  ...

Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Key data: 850 KW

2 X MTU 8V 4000 L63 Trigeneration Plants Hours: 34,000 Year: 2013 Fuel: NAT GAS Control Panel: MTU Capacity: 2 X 850kW Voltage: 400 HZ: 50 Service History: At 21,000 hours, major maintenance was performed relating to: pistons, liners, turbo overhaul, and intercooler replacement. At 42,000 hours, another maintenance is scheduled identical to the 21,000-hour one + connecting rod replacement. At 31,500 hours, the generator was overhauled with bearing replacement. The "exchange" overhaul is scheduled at 63,000 hours. STOPPED IN MARCH 2024 Scope of supply: Complete Trigeneration Plant. The trigeneration plant consists of two endothermic engines fueled by methane gas, each having the following main characteristics: • Chemical power input 2,130 kW • Electrical power 849 kW • Engine jacket heat recovery 511 kW at 78/90°C • Diathermic oil boiler from exhaust ...

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Specifications: Working length: 6200 mm Pressing force: 400 tons CNC control: CYBELEC ModEva 10S Number of controlled axes: 7 Controlled axes: Y1/Y2; X/1; R; Z1/Z2 Stroke: 315 mm Projection: 410 mm Crowning Motor power: 75 kW Tool clamping at the top and bottom Laser monitoring: FIESLER Dimensions (length x width x height): approx. 6300 x 2500 x 3850 mm Weight: approx. 40,5 tons Accessories: many tools Zustand / condition: very good condition

Granit marble ATELIERS MAITRE Length: 2000 mm Width: 1200 mm Thickness: 400 mm Height on feet: 910 mm Class 2 Weight: approx 2 T

Philips Practix 400 mobile X-ray machine with Varian RAD 68 0.6/1.2 tube • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer! • The offer is subject to prior sale.

Thermal press machine HIX Basic B 400 in production ready condition.

Key data: 400 , 800 , 1000

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11" cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Marelli AC Generator MX 400 SC/4 AC synchronous generator from 1991 with unknown operating hours, 1 available. 400 volts/50 Hz, 825 KVA. Manufacturer: Marelli Model: MX 400 SC/4 Type: AC Synchronous Generator Serial Number: ML-3700 Power [KVA]: 825 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 1,190 Speed [1/min]: 1,500 Year of Make: 1991 Weight [kg]: 1.795

For sale Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line . year: 2014

Center height: 400 mm Center width: 1250/1300 mm Circumferential Ø: over bed 440 mm Spindle bore: Spindle holder: Pick-up cone tailstock: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/flat 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space requirement: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg

Manufacturer: HAVER NIAGARA Model: T-Class U 400x800 1D Year of Manufacture: 2023 Type of Machine: Screening Machine/ Vibrating Screen Find more here - .ucymachines/ Contact us at - sales@ucymachines

Refer to code 1155 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical Data - Max. Pressing Force: 4000 kN - Max. Return Force: 340 kN - Ram Stroke: 500 mm - Installation Height (Platen/Ram): 1100 mm - Column Clearance (Front/Side): 1200 mm / - - Table Size: 1200 × 800 mm - T-Slots on Table (DIN 650): 22 H11 mm - Table Height: 850 mm - Ram Surface: 1200 × 800 mm² - T-Slots on Ram (DIN 650): 22 H11 mm - Drive Power: 76 kW - Max. Operating Pressure: 290 bar - Control Pressure: 90 bar - Machine Weight: 23000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

- Drill diameter: 3-10 mm (optional up to 22 mm) - Drilling depth: Max. 70 mm - Spindle distance: Adjustable between 45 mm and 540 mm - Hole spacing: Min. 3 mm, Max. 800 mm - Table size: 98 x 60 cm - Additional features: Drill length compensation, cooling/lubrication, speed regulation

All spare parts are sold individually or as a complete set. Those who purchase everything will receive an attractive discount.

turning diameter: max. 420 mm turning length: 1250 mm control: INDEX, C 200-4 D swing diameter: 630 mm travel x1: 320 mm travel z1: 1250 mm travel x2: 170 mm travel z2: 1250 mm travel x3: 320 mm travel z3: 1250 mm main spindle speed: max. 3000 U/min main spindle drive: 53 kW spindle passage: 102 mm spindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nm sub spindle - spindle speed range: max. 3000 U/min sub spindle drive: 53 kW sub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nm travel sub spindle: 1250 mm feed power: X1 14000/Z1 14000 N rapid traverse: X1 20/Z1 40 m/min feed power: X2 8600/Z2 14000 N rapid traverse: X2 20/Z2 40 m/min feed power: X3 14000/Z3 14000 N rapid traverse: X3 20/Z3 40 m/min numbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head p ...

Saw blade Ø: 360 mm Cutting range at 90° round: 110 mm Cutting area at 90° rectangle: 110 x 400 mm Cutting range mitred at 45° round: 110 mm Cutting area mitred at 45° rectangle: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space requirement: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg

max. wheel diameter: 400 mm gear width: 275 mm max. module: 6 Overall size: 300x330x245 cm weight of the machine ca.: 5,5 t dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min Specification: Max wheel diameter: 400 mm Min module: 1 Max module: 6 Table diameter: 370 mm Max wheel diameter: -With counterstay: 340 mm -Without counterstay: 400 mm Max axial offset: 275 mm Max tangential adjustment: 100 mm Tooth helical angle: 45 degrees Max cutter diameter: 145 mm Max hobbing length: 170 mm Hob turning speeds capacity: 63-180 U/min Feeds infinitely variable axial: 0,2-10 mm/U Feeds infinitely variable tangential: 0,1-5 mm/U Radial for spur gears: 0,1-4 mm/U Radial for worm gears: 0,025-1 mm/U Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial for spur gears: 400 mm/U Radial for worm gears: 100 mm/U Motor power: 7.4 kW The data for t ...

Halliburton HD 400 Pump Container . EX-container, VOLVO diesel engine D16. Diesel tank. Fan. Halliburton with 6" valve - can be replaced.

Offer 24228 Specifications: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E. - Welding cable - Ground cable -Trunk - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Technical data: Type : Casting resin transformer Finish : Dry Make : ABB Year of construction : 2000 Condition : Used Rated power : 1250 KVA Medium voltage : 10 KV Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type :AN Gross vehicle weight : 3090 kg Nationwide delivery included.

This 4-axis Gildemeister CTX -400 twin was manufactured in 2002. It features a robust turn-mill centre design, ideal for complex machining tasks. The machine is equipped with a chip conveyor system for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister CTX -400 twin turn-mill centre we have for sale. Contact us for further details.

This 3-axis Gildemeister CTX 400E was manufactured in 1998. It features an X-axis travel of 220 mm and a Z-axis travel of 635 mm. The machine is equipped with driven tools and a counter-spindle for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400E horizontal turning machine we have for sale. Contact us for further details.

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Daylight: 760 mm Ram surface: 800 x 800 mm Table surface: 810 x 1000 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

Hydraulic injection moulding machine manufactured in 2024. This Arburg Allrounder 270 C 400-70 features a clamping force of 400 kN and a maximum specific injection pressure of 2738 bar. It includes a mould height range of 160 - 475 mm and a distance between tie bars of 280 x 280 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 270 C 400-70 machine we have for sale. Contact us for further details.

REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)

Wide-chamber pin mill with grey cast iron housing, output / throughput: 600 kg/h max. (depending on material), required motor power: 12 kW to 22 kW (optional). Rotor and stator disc in very good condition. Cleaned, anti-rust primed and repainted. Rust protection inside can be easily removed before commissioning.

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months

Size: 980 x 600 mm Equipments: Investment table with tabulator 98 x 60 cm 4 head paper drills Speed regulation

Specifications will follow asap

Transnorm conveyor belt GF 2100-400-300 RA2405 Technical data: Make: Transnorm Model: TS 6565 motor-driven belt diverter D=65mm Conveyor length (NL): 2100 mm Frame width (NB): 400 mm, 600 mm with motor Belt width (GuB): 300 mm Overall height (BH): 200 mm Support feet: optionally available Conveyor speed (v m/s): 2.0 Drive: Nord Electrical data: 50Hz V380-500, kW 1.1 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2017 condition: Ausstellungsstück Conveying length in mm: 2100 Nominal / outside width in mm: 400 Belt width in mm: 300 Driven: YES Engine type: Nord KW: 1,1/S1 Conveyor speed m / s: 2 scope of delivery: without supports and side guides For indi ...