mikron 400 u used for sale

Shaft height: 400mm, motor type: 3~ motor/ three-phase motor, connection: Δ/Y, rated voltage: 380/660V, rated current: 560/323A, frequency: 50Hz, rated power: 315kW, rated speed: 993/min, mounting arrangement: IM V1, protection: thermal winding protection, power factor: cos φ 0,89, thermal class (WKL): F, protection class: IP54, weight: 2,45t. An on-site inspection is possible, not connected to power.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.

This 3-axis DAEWOO PUMA 400MB was manufactured in 2002. It features a maximum machining diameter of 460 mm and a maximum machining length of 1,050 mm. The machine is equipped with a spindle speed range of 30–3,000 rpm and a tool turret with 12 stations. If you are looking to get high-quality CNC turning and milling capabilities, consider the DAEWOO PUMA 400MB machine we have for sale. Contact us for further details.

Technical data for the shelving system: Manufacturer: Dexion Type: HI280 The scope of delivery includes: 01x Grating floor, used Material colour: hot-dip galvanised Overall width: 1,270 mm Total depth: 382 mm Clear span: approx. 340 mm f. Column depth: 400 mm Total height: 20 mm Mesh size: MW 68x35 mm Bearing rod: 20|1.80 mm Weight / piece: approx. 5.33 kg max. load per floor at Evenly distributed load: 100 kg 02x Mesh floor crossbar, used Material colour: sendzimir galvanised Clear width: approx. 1,280 mm Z-Profile: 52 x 25 mm Number of hooks: 02 pcs. Weight | Pcs.: approx. 0.84 kg General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of de ...

- KITAGAWA 400 mm chuck - Spindle bore 110 mm - Chip conveyor - Feed rate X-Axis 20M/Min - Feed rate Z-Axis 25M/Min - Coolant and Filtration system

This 6-axis Takisawa TS-4000YS was manufactured in 2021. It features a maximum swing diameter of Ø 600 mm and a turning diameter of Ø 370 mm with a length of 750 mm. The machine includes a powerful 22 kW main motor and a counter spindle with a speed of 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Takisawa TS-4000YS turn-mill centre we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details.

Center height: 200mm, distance between centers: 1000mm, swing over bed/cross slide: 400mm/225mm, spindle bore: 62mm, spindle nose: DIN 55027/6, tailstock taper: MK4, max. spindle speed: 4000rpm, main drive power: 10.5kW, operating hours PLC/motor: 1218h/145h. Machine dimensions X/Y/Z: approx. 2100mm/1080mm/1800mm, weight: approx. 1800kg. An on-site inspection is possible.

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1120 mm y-travel: 350 mm z-travel: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

This 4-axis Mazak NEXUS 4000 II was manufactured in 2011. It features an X-axis travel of 560 mm, Y-axis travel of 630 mm, and Z-axis travel of 640 mm. The machine has a maximum workpiece diameter of Ø630 mm and a weight capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 4000 II horizontal machining centre we have for sale. Contact us for further details.

This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.

An Nd:YAG dental laser welding unit is offered. Manual welding chamber with hand opening, laser type: Nd:YAG laser, wavelength: 1064nm, max. pulse energy: 40J, max. average power: 30W, laser class: 4, control: analog and digital keypad control with display. Equipped with Leica stereomicroscope with binocular tube, footswitch, shielding gas connection, hand openings. Inspection by appointment is possible.

TREIF

- HA4 backgauge X, R, Z1 and Z2 - WILA NewStandard Top Tool clamping - Power on Hours 26.000 H - PILZ Laser safe  - 2 x Arm on front 1000 mm

Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

1 CNC turning and milling center Make: Heyligenstaedt Model: Hn35U/4000 Flex Year of construction: 1994 Control: CNC Siemens 840T Technical data: Working Range: - Turning length: 4000 mm - Circumferential diameter over bed: 890 mm Main Drive: - Power at 100% ED: 50 kW - Power at 50% ED: 69 kW Main spindle: - Spindle diameter in the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Form A DIN55026 Gr15 - Speed range: 1 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min Tool carrier system: - Tool interface: Capto C8 - Y-axis linear range of motion: +/- 130 mm - X-axis linear range of motion: 490 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140mm - Axial force min/max: 16000/2500 N - Inner cone quill: MK 5

Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026.

Suvamatic draadkabel 400mm Draadkabel 400mm voor gewichtsvermindering

4 head Paper Drilling machine Josef Foellmer IRAM 400/445 4 Kopf Bohrmaschine / 4 head Paper Drilling machine Josef Foellmer IRAM 400/445 Serial-No. 2190

- Only 4630 Cutting hours - Automatic door - 40 CAPTCO C6-Tool magazin - Robot interface - 5 Axis simulteneous package - Sub spindel with C-Axis and 0,0001 Degree - Internal Grundfos 15 Bar coolant - Chip conveyor - Optional tooling package with 40 holders

Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg

Hydraulic injection moulding machine manufactured in 2016. This Engel Victory 3550/400 tech features a clamping force of 4000 kN and an injection unit with a screw diameter of 80 mm. It includes a fully hydraulic tiebarless clamping system and advanced automation with conveyor belts. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 3550/400 tech machine we have for sale. Contact us for further details.

VEB DLZ 1000/4000

CNC shearing machine manufactured in 2023. This Durma VS 4006 features a cutting length capacity of 4100 mm and can handle a maximum sheet thickness of 6 mm for structural steel. It includes a powerful 11 kW motor and a rear stop/back gauge range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the Durma VS 4006 machine we have for sale. Contact us for further details.

This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details.

width of the table: 400 mm length of the table: 2450 mm fence can be tilted 4 knive cutterblock motor 3 kW

Length of infeed table: 6000mm, length of outfeed table: 4300mm, length: 2400mm, width: 1300mm, height: 1800mm, with saw blades and length stop as accessories and documentation, was not regularly maintained, without maintenance reports, no known defects.

Bread slicer Band slicer PS Mako Slicer 400 - Ribbon bread slicer - Manufacturer: PS Mako - Type: Slicer 400 - Operating voltage: 400 volts - Rated current: 8A - Year of construction: 2002

Technical data for the shelving system: Shelving system: SSI Schaefer Type: R 3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: 1,056 mm Number of fields per row of shelves: 01 pcs. The scope of delivery includes: 02x Shelf stand, used Material colour: sendzimir galvanised Frame profile dimensions: 31 x 60 mm incl. gravel bars and base plates The stands are pre-assembled 2,494 mm high 400 mm deep 02x Shelf, used Designation: ZB 4423 V Material colour: sendzimir galvanised Dimensions: 994 x 400 x 30 mm Weight | Pcs.: approx. 4.65 kg Max. load per shelf 200 kg at the same weight. Distributed load 01x Plinth panel, used for floor length: 994 mm Material colour: sendzimir galvanised Dimensions: C 28 x 22 x 8 x 0.6 mm Weight | Pcs.: approx. 0.51 kg 05x Shelf crossbar, second choice (new) Material colour: sendzimi ...

Bread slicer Treif Diskus 400+ circular knife -digital control - Cutting width adjustable from 3 mm to 15 mm - 400V 50Hz - Stainless steel cladding - Weight 195 kg - Operating voltage 400 volts - Control voltage 24V/DC V AC - Nominal power 0.9 kW - Year of construction 2015 External dimensions: width 80 cm depth 70 cm height 112 cm

Key data: 400 t, 160 mm

Nominal forming force of the press 400 t Table 1250x825 mm Dimensions of the ram 900x560 mm Lifting of the ram 30-160 mm Machine weight 22 T Power of the main electric motor 30 kW Dimensions L x W x H --> 1550 x 2900 x 3360 mm complete with press line = Production LASA, Spain year 2008 = - Decoiler 4 t - coil width 400 mm, coil outer diam. 1600 mm Coil inner diameter 450/550 mm, unwinding speed up to 25 m/min - Pre-feed machine RAPID PRESS max. width 420 mm, material up to 3 mm, max. speed 70 m/min - Documents, electrical diagrams, etc.

Troughed belt continuous blasting machine Manufacturer: Rösler Drum ø: 400mm Max. workpiece length: 700/1000mm Single piece weight max. kg: 12 kg Loading capacity: 100kg Blasting wheels: 4 pieces á 7.5 kW Installed power : 45kW Warranty: 6 months functional and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Dlewyb OPTIONAL: Delivery to your factory Supervisor assembly / commissioning / training

Horizontal broaching machine RAWT 25 x 4000 x 500 company Hoffmann Year of manufacture 2003 Max. Operating pressure: 70bar, filling quantity hydraulic fluid: 630l, with loading gantry and sliding guide with carriage Find more here - .ucymachines/

Key data: 420 mm, 1524 mm, 3300 1/min

Stock number: 3963 CNC LATHE Manufacturer: MAZAK, Type: INTEGREX 400 III-S Machine NO.: 173882, Year of manufacture: 2005 Specifications: Max. circumferential diameter 420 mm dia. Max. turn. About Bed 850 mm Dia. Turning length 1524 mm Main motor power 30 kw Main spindle speed range 3300 rpm Drilling through drawing tube 102 mm dia. C axis - head spindle movement 0.001 degrees Y axis +/- 115 mm B Axis Movement -30/+195 degrees B axis spindle speed 12000 rpm B axis spindle effect 18.5 B axis tool system Capto C6 Sub-spindle C axis - counter pindle movement 0.001 degrees Engine power sub-spindle 26/22 Kw Total Power Consumption 99.9 kva Control Mazatrol 640 Fabr. Spindle Hours 7167 Hours Controlled in 6 Axes Accessories: ATC Tool magazine with 40 stations Hydr. Chuck main spindle 300 mm dia Hydr. Chuck Subspindle 300 mm dia  ...

Drive: . kW Capacity: . kg/h material: . 5 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.