mikron 400 u used for sale

Without a key.

Siemens industrial electronic control modules, version C/D, made in Germany, supplied in original boxes with manuals. Part number: 6SN1118-0DG23-0AA1. serials: F2H5012345 (05/2016), F2F8016035 (08/2015), F2FN024387 (11/2015).

Damaged

Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg

Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission 250 amps Table diameter 450 mm Table load 300 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 300 kg vertical Total power requirement 220 kW Machine weight approx. 0.078 t Dimensions approx. 0.66 x 0.45 x 0.48 m Condition: never used / new (5)

Spindle rotates; Displacement works, but does not always transmit the power supply electronically.

Machine number: 35114 Operating voltage: 400 V Frequency: 50 Hz Rated current: 14.2 A Connected load: 0.8 kVA Control: HEIDENHAIN TNC 124 Spindle speed: 0 – 4000 rpm Table dimensions: 1000 x 680 mm with 4 grooves incl. various tool holders Travel distances: X: 600 mm, Y: 300 mm, Z: 600 mm, W: 650 mm Drilling diameter Twist drill: max. 16 mm Drilling drill: 4 – 16 mm Threading: max. M12 Reference: Laubender

Clamping plate 1400 x 1200mm Height 200mm Groove 38 x 38mm see pictures

22 outer boxes on pallet, 5 assorted boxes per box.

Container Rotating Device Load capacity 2.2 t Workpiece diameter 101 - 1524 mm Feed speeds infinitely variable 0 - 3600 mm/min Wheel diameter 254 mm Wheel width 76 mm Total power requirement 0.5 kW Machine weight approx. 0.245 t Space requirements approx. 1.02 x 0.82 x 0.5 m Condition: never used / new (5)

Saw blade Ø: 355mm - Mitre angle max.: 45° - Motor power (kW): 3.50kW - Connection: 220V - Machine weight: 25kg

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - Welding current transmission - Hole in face plate 30mm, 20mm deep. - Documentation in English only. Table diameter 330 mm Table load 220 kg Swivel range 135 degrees Tilt adjustment: manual/mechanical manual Speed max. 5 rpm infinitely variable Table load 100 kg. vertical Total power requirement 0.125 kW Condition: never used / new (5)

Siemens SIVACON 8PS tap-off unit, 230V AC, 16A, 50–60 Hz, with 3 IP44 Schuko outlets and fuse holders. Marked Tap-off unit 16A / 3x1p D01+3xSD”. Includes original packaging and instruction sheet.

Includes oil cooler, cooling water mixer, 30 tool holders and various accessories

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 250 amp welding current transmission Table diameter 300 mm Table load 50 kg Swivel range 90 degrees Speed 1 - 12 infinitely variable rpm Table load 50 kg vertical Total power requirement 220 kW Machine weight approx. 0.036 t Space requirement approx. 0.45 x 0.43 x 0.38 m Condition: never used / new (5)

A Kleindienst packer and an unpacker of the Kleindienst brand are sold. Both devices are functional and come from the filling plant of a beverage company. Specifications: - Brand Kleindienst - Designation: 2-head packer - Capacity: 3,000 - 18,000 bottles. - Material: Completely stainless steel - Control: Siemens S5 -Sizes: 0.5 Ltr. NRW, 0.5 Ltr. Euro, 0.33 Ltr. Steini 0.33 Ltr. Vichy -Year.:- - Dimensions (LxWxH): 170x130x210cm

Two Dong Do industrial control/display units with keypad, PROFIBUS and RS232C interfaces, AC100–240V, 30W max, tested powered on

With accessories in wooden box.

Not tested

Changing gear set according to pictures

Mechanical filter Air volume: 2000 m³/h Device extraction capacity Colour: Light grey Electrical connection: 400V, 50/60 Hz 0.75 kW Footprint: 900 x 300 mm Weight: approx. 50 kg

Serial number: 519/85 Operating voltage: 380 V Control voltage: 220 V Connection: 0.6 kW Nominal current: 10A

Horizontal milling machine - Incl. partial table x-travel 780 mm y-travel 220 mm z-travel 410 mm Table length 1100 mm Table width 270 mm Spindle speeds 40 - 960 rpm Spindle holder SK 40 Total power requirement kW Machine weight approx. 1.7 t Space requirements approx. 1.8 x 1.6 x 1.8 m Condition: unchecked (6)

Equipped with various accessories, including 3-jaw chuck, 4-jaw chuck, etc

Precision - Universal measuring table with stabilizer "small" Table = 100 x 150 mm Measuring height/tripod approx. 245 mm Strong cast base; rectangular measuring table. Measuring table surface ground with incorporated dust grooves. Center column with adjustment nut. horizontal adjustable cross arm for dial gauges or fine indicators.

EREMA flush filter with partial flush back. SW 4/134 RTF

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Unused in the original packaging Rated input voltage 220 Frequency Hz: 50/60 Rated input power Kw: 7.5 Rated input current A: 42 Duty cycle 40C 10 min

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools

Complete plastics recycling plant in operation. PRICE MACHINE WITH 2 PISTON FILTERS: 520.000€ PRICE MACHINE WITH 1 PISTON FILTER AND A 1 BRITAS FILTER MODEL ABMF 1050-12: 660.000€ 8,500 HOURS OF WORK. IN PERFECT CONDITION. PRODUCTION /HOUR: 900/1,000 KGS. MATERIAL: LDPE, QUALITIES 98/2 AND 99/1 AFTER 1 WASH.

Double Swivel Head Fast Runner SK40 for the Deckel FP Milling Machine without Motor However, the motor of the normal high-speed engine should fit just as well. Although the complete head probably has 70kg at the end, it probably even fits from FP1 upwards to FP4 Very good used condition, either never used, or only a few times. Except for slight traces of storage, no signs of wear to be seen. The spindle rotates cleanly and easily. However, the (drilling) stroke is a bit heavy, probably has to be adjusted. Pickup. However, a delivery can be arranged in advance, can... You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Manufacturer: CME Year: 1991 Type: CNC universal milling machine Numerical control: Heidenhain TNC 124 Axes: 3 axes (X, Y, Z) Strokes: X 1100 mm / Y 700 mm / Z 500 mm Table: 1400 x 450 mm Spindle: ISO / SK 40 – 40 to 1800 rpm – motor power 10.6 kW Dimensions: 2400 x 2150 x 2100 mm Weight: approx. 3800 kg Notes: Robust Spanish-made universal CNC milling machine.

Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool sparing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping area 1370 x 400 mm Number of T-slots 5 pcs. Spindle speeds: 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Daikin ERQ200A7W1B Condensing unit Serial: 8008515 2020, condensing unit, Gas R410A, 3Ph

This 5-axis SCHÜCO AS 100 was manufactured in 2022. It features a machine bed length of 9,000 mm and allows for 6-sided processing with two 5-axis towers. The machine includes 5 movable clamping blocks with independent drives and a saw blade diameter of 450 mm. If you are looking to get high-quality profile machining capabilities, consider the SCHÜCO AS 100 universal machining centre we have for sale. Contact us for further details.

This 4-axis SCHÜCO PBX AL was manufactured in 2008. It features a processing length of 7,200 mm and is designed for the machining of aluminum profiles, including double-bar processing and through-feed capability for longer profiles. The machine includes an automatic tool changer and clamping blocks for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the SCHÜCO PBX AL universal machining centre we have for sale. Contact us for further details.

Year of manufacture 2001 Heidenhain TNC 310 Travel distances 350 x 240 x 340 Spindle speed 20 - 5000 Drive power 6.3/10 KW Total connected load 15 kW Tool holder SK40 Accessories: el. Handwheel Universal swivel rotary table 400 x 280 mm, Rotation range 360°, swivel range +105/-15° with electronic angle display Coolant Setup

Countertop dryer with conveyor

Palamine 80ton Upstroke Press (hot press) Platen size: 1525x1150 Daylight gap between top and bottom platen 185cm Max. temperature on platens 600 degrees Type of platen heating Electric 240V Overall footprint size 2160cm x 1525cm

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

DECKEL S11, universal tool & cutter grinder, under power in our warehouse, Mimu machine-tools (Italy)

Key data: 600 mm, 525 mm, 200 mm

Tool Milling Machine - Universal DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial No.033 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled Machine is sold as a defect