mikron 400 u used for sale

Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5)

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 250 amp welding current transmission - Hole in face plate 40mm. Table diameter 350 mm Table load 100 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 50 kg. vertical Machine weight approx. 0.055 t Space requirement approx. 0.46 x 0.4 x 0.42 m Condition: never used / new (5)

Hydraulic power unit / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Motor: 2,2,000 2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 Load capacity 1000 kp Pn 16 Mpa stroke: 700 mm Length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic power unit BOSCH REXROTH Year of construction approx. 1970Operating pressure Nominal capacity: 50 barOperating pressure: max. 70 barVolume flow: approx. 40 litres/min. Tank capacity: 240 litresEngine power: 4 kWNee connection: 380 volts, 50 Hz- 1x electric hydraulic valve BOSCHPlating requirement length: 1020 mm, width: 610 mm height: 1000 mmown weight: approx. 170 kg; used

Hydraulic Power Unit, Hydraulic Power Unit BOSCH REXROTH Order No: 983885 Year of Manufacture 1982Tank Capacity: 150 LitresOperating Pressure: 60 bar Nominal Pressure / Max. 100 barVolume Flow: 20 Litres/min. Motor power pump : 3 kWNetz connection: 380 volts, 50 Hz.- 1 piece hydraulic pump BOSCH REXROTH, type 1PV2V3-40/25 RAO1MC63- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type E6 E51/AG24NZ4- 2 pieces hydraulic valve BOSCH REXROTH with electric solenoid coil, type 4WE10D10OFLG24NZ4- 1 piece pressure accumulator- various throttle valves, pressure regulators and

Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used

Central lubrication unit, gear pump unit, MFE5-BW30+399, SKF, mint condition Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, - comes from a spare parts warehouse of a certified production facility, - Minor damage to the level indicator plug without functional impairment. Technical data: - Central lubrication unit, MFE5-BW30+399, Vogel/SKF, new - Gear pump MFE5-2000+299, - 0.5 L/min, max. 28 bar, 230/400 V, 2700 rpm - 50 x 35 x 55 cm high - Includes level indicator - Includes level monitoring 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund th ...

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 2 milling units and 2 buffing units from BRANDT KS 25 edgebanding machine -buffing units: motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos of nameplates -Voltage: 220 V / 200 Hz -Price/Fee: complete -Overall dimensions: 1200/800/H590 mm Total weight: 175 kg

Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit, swivel gripping unit, universal swivel unit -Manufacturer: Schunk / Festo Universal swivel unit with 2x swivel gripper unit -Swivel unit: Schunk SRU 35 -Swivel gripper unit: Festo HGDS-PP-16-P1-AB 2 pieces -Delivery/Price: complete -Dimensions: 345/240/H150 mm -Weight: 5.1 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R32102089 -Ultrasonic sonotrode: 15k-FE0039H -Quantity: 1x ultrasound transducer available -Dimensions: 520/180/H130 mm -Weight: 15 kg.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: QDSonic, Ultrasonic welding transducer, Ultrasonic vibration unit -Type: 20200319 -Horn: Type -Ultrasonic sonotrode: Length 110 mm -Number: 2x ultrasound transducer units available -Price: per piece -Dimensions: 370/110/H110 mm -Weight: 6.7 kg/pc.

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2102088 -Ultrasonic sonotrode: 15k-FO224H -Quantity: 1x ultrasound transducer available -Dimensions: 520/270/H130 mm -Weight: 19.1 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2102087 -Ultrasonic sonotrode: 15k-FO13OH -Quantity: 1x ultrasound transducer available -Dimensions: 520/270/H130 mm -Weight: 19.1 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003631 -Ultrasonic sonotrode: 15k-FO655 -Quantity: 1x ultrasound transducer available -Dimensions: 520/270/H130 mm -Weight: 19.1 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 118.858/1 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/260/H70 mm -Weight: 7.8 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 061 121 642/1 see photos -Number: 3x ultrasound transducer units available -Price: per piece -Dimensions: 450/100/H145 mm -Weight: 15.7 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 4 004 635 212.433 see photos -Quantity: 1x ultrasound transducer available -Dimensions: 450/270/H145 mm -Weight: 20.1 kg

TELSONIC Ultrasonic Handystar UHG1000, 35 kHz, S/N VKK5-0166-0108, handheld

Automatic Oil Flusher Ultra 907 Quantity: 1 piece Auction-ID: A7-45974-15

Automatic Oil Flusher Ultra 907 Quantity: 1 piece Auction-ID: A7-45974-14

Retro Motorino Torino scooter. Classic style urban moped, ideal for daily use or as a light mobility vehicle. Key included. Mileage shown: approx. 790 km (not verified). Status: - Used - Untested operation - Possible signs of wear and tear Sold in the condition it is in. Pre-inspection is recommended. The lot includes only what is visible in the photographs. Keywords: retro scooter, urban moped, classic scooter, light motorcycle, urban vehicle, motorino scooter, motorino torino, vintage scooter, modern moped, city bike, classic style scooter, mobility vehicle, second hand scooter, light motorcycle, city scooter, automatic moped, black scooter, compact motorcycle, urban practical vehicle, scooter with key Auction-ID: A1-46312-4

\" The measuring device has a digital display unit with data output. Serial number according to nameplate: 0002C49. The device comes in the original Mitutoyo wooden box. Due to the design, the measuring range is in the range of approx. 600 mm (U60 version). Digital display with zero and preset function. Visually, there are usual signs of wear Manufacturer: Mitutoyo Code No.: 552-182 Model: CFC-U60 Origin: Made in Japan Condition: Used, visually good condition, in original wooden box \" Auction-ID: A7-46417-274

\" Universal measuring stand from Mitutoyo for flexible mounting and positioning of dial gauges, touch levers or transducers. Robust design with adjustable holding arm and fine adjustment for precise measurement setups in the workshop and quality assurance. • Type: Universal measuring stand • Code no.: 9124-101 • Manufacturer: Mitutoyo • Origin: Mexico • Type: mechanical, without magnetic base • Accessories: \"Holding and positioning system \" Auction-ID: A7-46417-242

Equipped with 2 toilets; 2 sinks; Clean water tank; Electric pump; Lighting; Meter cupboard; Unused Auction-ID: A1-40111-97

Roll hatch on remote control Extraction Chip shop Display case Oven Auction-ID: A1-40111-98

Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5) Auction-ID: A7-46642-62

Welding turntable with - Footswitch - Tilting/swivelling by hand - Speed infinitely adjustable - 250 amp welding current transmission - Hole in face plate 40mm. Table diameter 350 mm Table load 100 kg Swivel range 90 degrees Speed 0.2 - 2 infinitely variable rpm Table load 50 kg. vertical Machine weight approx. 0.055 t Space requirement approx. 0.46 x 0.4 x 0.42 m Condition: never used / new (5) Auction-ID: A7-46642-101

✨Densitometer / Light Box Wellhöfer✨ Unilight D + Unilight S, X-ray Film X Ray Unchecked from practice Closure Auction-ID: A7-46327-41

Manufacturer: Pepperl+Fuchs Model: HM-MT-USB-PWRX-010031P (current replacement: HM-PF-USB-PWRX-010031P) Type: USB HART modem with PowerXpress Function: Interface for commissioning, calibration and data acquisition of HART field devices Supplies power to all 2-wire HART devices (up to 40 mA) USB powered, no external power supply required Technical data: Input current: 30 mA (modem only), 255 mA (with device current) Output: 24 VDC at 40 mA Interface: USB 2.0 Galvanic isolation: 500 V DC Operating temperature: -20 ... +50 °C Degree of protection: IP20 Housing: Polycarbonate Dimensions: 96 × 47 × 24 mm Cable length: 1.8 m with test clamps [pepperl-fuchs.com], [pepperl-fuchs.com] Compatibility: Windows 7, 10, 11 (32/64 bit) Special features: Compact, robust for industrial use Mode selection: \"Powered Modem\" or \"Modem Only\" Auction-ID: A1-46686-53

WEINIG UNICONTROL 10 3-spindle machining centre , cut-off saw and glazing saw. Width 30–220 mm, height 30–100 mm, length 330–2600 mm. Outputs 7.5–12 kW, speeds 2800–7000 rpm. Spindles Ø40 mm, transverse clamping 240 mm, longitudinal 160–240 mm. Estimated weight 2500 kg. Auction-ID: A1-46801-63

Stromag / LUST DriveTronics Models included: Stromag Stromatic UDC 012.3 Stromag Stromatic ADC 006.3 Stromag Stromatic ADC 006.3 / II Quantity: 3 drive modules (sold as one lot) Input: DC 540 V Output: 3AC, up to 0–380 V Frequency range: 0–300 Hz Rated power approx.: 2.2–4.5 kVA (depending on module) Industrial servo/drive controller units Integrated cooling fans Multiple control and feedback connectors Suitable for industrial automation and machine drive systems Made in Germany Auction-ID: A7-46756-504

Capacities : Thickness × width: 120 × 230 mm Minimum / maximum width: 20 – 230 mm Minimum / maximum height: 8 – 120 mm Minimum length single piece: 750 mm Speeds: Variable feed: 5 to 24 m/min Spindle rotation speed: 6,000 rpm Composition and equipment: 2,500 mm Input table 2,500 mm Motorised adjustment of machining width and height Adjustments accessible on the front panel with the hood closed SIKO digital meters on each setting Wrap-around and sound-absorbing enclosure with panoramic bay Tool shafts Ø 40 mm Shaft configuration (7 shafts): Lower horizontal shaft: 5.5 kW (7.5 hp) Right rotor: 11 kW (15 hp) Left rotor: 11 kW (15 hp) Vertical shaft: 5.5 kW (7.5 hp) Upper horizontal shaft: 7.5 kW (10 hp) Lower horizontal shaft: 7.5 kW (10 hp) Universal shaft: 5.5 kW (7.5 hp) Dimensions (estimated)Approx . 5,800 × 2,100 × 1,900 mm (to be confirmed) Weight (estimate): Approx. 4 ...

2 toilets; 2 sinks; ventilation grille; ventilation unit; light; toilet paper holder holder; lockable; 220v; drainage; forklift slots; crane hooks; 5891 Auction-ID: A1-46416-16

Hydraulic copy unit, incomplete setup Model: RT10/F22 Serial number: 512 Manufacturing year: 2010 Manufacturer: Spirsin S.L. Made in Zaragoza, Spain Lathe accessory / spindle unit Auction-ID: A7-46053-23

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

Stephan Shredding Machine Type: MCH-D 60A or MCH-D 30 Machine almost complete Nirosta Product-contact parts 100% Nirosta Power: Approx. 45 KW Product output approx. 2000 Kg hour MCH-D 30 Product output approx. 4000 Kg hour MCH-D 60

Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!

Spur gear with drive motor 30 kW (e.g. suitable for a ball mill), shaft diameter 45 mm, N1 = 1,450 UPM, N2 = 14.5 UPM, drive shaft diameter 130 mm, with electric brake, coupling with counter window 600 mm diameter. Oil 190 CSX/50C - Wa-No. 369226. Complete on foundation frame.

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!

Filtration / cooling unit Furbished with 2 pcs of water coolers and 2 filterhousings PALL 8304 X= Lengths All kind of filterelements available in differnt micron ratings. Ideal to solve both filtration and cooling on various installations using Hydraulic Oil

Filtration unit furbished with 2 PALL 8304 X-length housings For Hydrolic and lube oil filtration Any filterelements available on request

Cutting width approx. 700 mm Cutting height approx. 150 mm Saw blade diameter 500 mm Engine power approx. 4.0 kW hydraulic saw blade stroke

cutting width 700 mm cutting height 150 mm saw blade diameter 500 mm motor power about 4.0 kW hydraulic Saw stroke

Cat.-Nr. 08-1210 in a very good condition with flat bottom Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Material: Normal steel Fan percussion More information and price on request The machine is extensively overhauled and then is as new as new.