128,757 used machines on RESALE, but how to find them? Machine Search
Grinder with mixer Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg
Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.
Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.
5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal ov ...
USED VERTICAL MIXER, constructed in sturdy carbon steel, Total height 3.400 mm., Diameter 1.300 mm., Legs 2.150 mm., Barrel height 1.250 mm., Cone height 750 mm., inner screw 180 mm. diam., Nominal capacity 1.800 lt.ca, side discharging pipe, Discharging point 860 mm. from floor., hatch on barrel mm. 500 x 700, 1,5 kw drive, installed power - used power in work: about 60-65% : 1.5, capacity: 1800 lt.
Key data: 530 mm, 450 mm, 450 mm
5-Axis CNC Machining Center Mikron UCP 600 Year of Make: 2004 Control: Heidenhain iTNC 530 x-travel: 530 mm y-travel: 450 mm z-travel: 450 mm Spindle: SK 40 Speed: 12,000 rpm Swivel table STP: Ø 400 mm Tool changer: 30 x Weight: approx. 6.5 t Switch-on hours: approx. 49,000 h Spindle hours: approx. 2,500 h
USED VERTICAL MIXER, 24 m3 capacity, total height approx 5.400 mm including transmission group + cyclon, max Ø 2.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter,, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, electric voltage: 400 V, 50 Hz,, conditions: good working conditions, availability: immediate, width: 2800 mm. special transport
Manufacturer: RASOMA Type of Machine : End Milling Machine Year of Manufacture: 2018 Total Weight: 16,000 kg Voltage: 3x400V, 50Hz Control Voltage: 24V DC, 230V AC Rated Current: 92 A Maximum Fuse: 125 A Power Rating: 62 kW Find more here - / Contact us at -
Used cone mixer Vrieco Nauta mixer Type 100-RV-5 Material: Mild steel Max product weight 7,000kg Previously, gelatin was mixed with this mixer The mixer is in an uninspected condition. Revision work is also offered at the sale. See pictures
TECHNICAL SPECIFICATIONS Manufacturer: MICROMIX Description: Concrete filling station Version: Semi-mobile Type: 500 Year of Make: 2017 Plate Mixer Batch: 0.5 cbm Hourly output: 15 cbm Drive power mixer: 15 kW Aggregate silos: 2 x 6 cbm Water storage tank: 120 l Binder silo: 27.5 cbm / 35 t cement Unloading conveyor (length/width): 10,000 mm / 800 mm Discharge height unloading conveyor: 4,000 mm Drive power unloading belt: 4 kW SPECIFIC COMMENT - Control module with magnetic stripe card - Automatic scale (calibratable) - Admixture dosing - Dust bag filter with electromagnetic vibrator and dust collection container - Height adjustment of the belt conveyor/unloading belt
REF-2704 LLEAL MAX-MIX MM-500 VACUUM MIXER FOR LIQUID AND VISCOUS PRODUCTS Manufacturer: LLEAL Model: MAX-MIX MM-500 Year: 2000 Machine no.: 14890 Series: 3712 Electrical specifications: 49.8 kW/380 V/104 A/3+N+E/50 Hz Dimensions (in mm): See the drawing in the last picture. MAX-MIX MM-500 mixing, dispersion, emulsion and homogenisation system. The MAX-MIX processor is a multifunctional piece of equipment ideal for manufacturing liquid and viscous products that require dispersion, homogenisation and emulsion stages (in both solid/liquid and liquid/liquid processes) and that also require a complete deaeration, which is possible thanks to the internal vacuum circuit. The process can also include the heating or cooling of the products during their manufacture, the addition of solids and liquids in vacuum conditions, and the recirculation and discharge by positive displac ...
NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators
Mounting plate with JCB / Miller / Geith mount, - Suitable for demolition and sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Recording: JCB / Miller / Geith, - Hole pattern: 36 x 48 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
cantilevered mixer 120l when filled with water approx. 100l usable volume with control box with stud work with ball segment valve as outlet 0 operating hours at the end customer
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
Heilig V-Mix 1.250 VDR with hygiene rounding off • Volume with water filling 1,250 litres • Usable volume in the range of approx. 100 – 1,000 litres, depending on the product • Max. filling weight 1,000kg • Mixing screw drive 3.00kW • Swivel arm drive 0.37kW • All metal parts in contact with the product are made of AISI 304 stainless steel
Key data: 1000 mm, 500 mm, 530 mm
Like new: X-axis: 1,000 mm Y-axis: 500 mm Z-axis: 530 mm Table dimensions: 406 x 1,372 mm Spindle mount: BT 40 Spindle speeds: 1 - 8,000 rpm Control: Fagor Equipped with: - Coolant system -Operating instructions Country of origin: Taiwan Engine power: 10 hp Machine LxWxH: 2,900 x 2,280 x 2,550 mm Machine weight: 3,100 kg
Key data: 4230 mm, 2100 mm, 850 mm
X-axis: 4,230 mm Y-axis: 2,100 mm Z-axis: 850 mm CNC control: Heidenhain TNC 530 Spindle mount: ISO 50 Spindle speed: 6,000 rpm Tool changer: 30 places Table dimensions: 4,000 x 1,650 mm Stand spacing: 2,300 mm Equipped with: - Angle milling head - Touch probe button - Inner spindle cooling - Double chip conveyors - Cooling system -Operating instructions Country of origin: Taiwan Machine LxWxH: 9,000 x 3,500 x 4,000 mm +/- Machine weight: 30,000 kg
General SKU120X675 LocationBarneveld MakeVMA-Getzmann TypeDispermat 5 No.601-9814889 Year of constructionunknown, Milling chamber made of glass Material Disc materialPlastic Main Features MaterialStainless steel/Glass Volume0.4 Ltr. Motor2.2 KW Specified Features - Sand mill MaterialStainless steel Vertical sandmill(1x) Capacity0,4 ltr Housing dimensions dia. 120x400mm With mechanical sealcheck With jacketcheck Motor2,2 KW, 220/380 Volt With variable speed drivecheck Information Mounted on framecheck Floorspace0,9x0,6 M Total height1,5 M Weight175 KGSand millsVMA-GetzmannMills > Sand millsBrand > VMA-Getzmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barnevel ...
General SKU427W1532 LocationBarneveld MakeGel Verfahrenstechnik TypeVSTG 350L CAD1-04181 No.A10.3266 Year of construction2010 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Filtercheck Information Total height2,90 m Weight300 kg CEcheck Floor space1,10x0,70 m Extra SpecificationsInput DN70, output DN200 with pressure gas valve Miscellaneous filtersGEL VerfahrenstechnikFilters > Miscellaneous filtersBrand > GEL Verfahrenstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU316W637 LocationBarneveld MakeMixaco TypeCM-30 No.SN050024 Year of construction2005 Main Features MaterialStainless steel Volume24 Ltr. Motor5.5 KW Specified Features - Cold mixer Cold mixercheck Capacity24 l Vessel sizesø 400 x 300 mm Inlet400 mm Manual operated outletcheck Outletø 125 mm With motor5.5 kW (400V, 1425 rpm) Rotor speed1425 rpm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck Total height1,25 m Weight250 kg Floorspace1,40 x 0,90 m Extra SpecificationsWith 2x mobile barrels, volume 24 l each.Cold mixersMixacoPlastic machinery > Cold mixersBrand > Mixaco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...
General SKU301W572 LocationBarneveld MakeWab Bachofen TypeKD15 No.740364 Year of construction1973 Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill MaterialStainless steel 1.4435 (316L) Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt Information Total height1,60 m Weight590 kg Floorspace0,75x1,00 mSand millsWab BachofenMills > Sand millsBrand > Wab Bachofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU379T1136 LocationBarneveld MakeDrais TypePML-V+H No.54 310 Year of construction1992 Pressure Working pressure3 Bar Main Features MaterialStainless steel Volume1.2 Ltr. Motor3.3 KW Specified Features - Sand mill MaterialCeramic, Stainless steel 1.4571 (316Ti) Capacity1,2 Ltr. Inlet9,5 Outlet9,5 With jacketcheck Motor3,3 kW Rotor speed2900 rpm With pumpStober RD11G-1005-012-4 Motor0,12 kW 220/380 (Ex) With variable speed drivecheck Information With switchcheck With switchgearcheck Weight340 kg Floorspace1,2x0,9 m Total height0,7 m ATEX compatiblecheck Extra Specificationsthe machine comes with many additional partsSand millsDraisMills > Sand millsBrand > Drais What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...
General SKU300U1181 LocationBarneveld MakePanametrics TypeMagnamike 8000 No.97299607 Year of construction2017 Specified Features - Miscellaneous Motor220 volt Information Total height0,15 m Weight4,6 kg Floor space0,31x0,26 m Extra SpecificationsWall thickness measuring Comes with tooling, Measuring range bullet diameter 1,6-9,6mm, 0-10,2mm MiscellaneousPanametricsMiscellaneous > MiscellaneousBrand > Panametrics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU292W971 LocationBarneveld MakeDynomill TypeECM-pilot No.050917 Year of construction2005 Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck Information With switchcheck Weight400 kg CEcheck Floorspace0,68 x 0,74 m Total height0,58 m ATEX compatiblecheck Extra Specificationsmounted on table. cap. 10-200 l/h, cooling water consumption 800 l/h Sand millsDynomillMills > Sand millsBrand > Dynomill What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination w ...
General SKU235W256 LocationBarneveld MakeLeffek TypeWWCU-PHE 40-76/750 No.497-07 Year of construction2008 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Information Total height2,2 m Weight2720 kg CEcheck Floor space2,1 x 2,5 m Extra SpecificationsWater-Water Cooling Unit (WWCU) with : : - deionised water circuit (including two deionisation pressure filters, 2 x 18 l/h) : : - heat exchanger : : - industrial water circuit : : - pumps : : - control cabinet and full documentation Miscellaneous filtersLeffekFilters > Miscellaneous filtersBrand > Leffek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
General SKU362U983 LocationBarneveld MakeServolift TypeMC No.11576 Year of construction2007 Main Features MaterialStainless steel Volume1200 Ltr. Motor14 KW Specified Features - Tumbler mixer Tumbler mixercheck Capacity1200 kg With motor2x 5,5 kW (400 V, 1430/64 rpm) With variable speed drive5-15 rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4541 (321) Information With switchgearcheck CEcheck Floorspace3,10 x 2,30 m Total height3,20 m Extra SpecificationsContainer type SL containers. hydraulic unit, 2,2 kW Tumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU401W1244 LocationBarneveld MakeAva-Huep TypeHTC2100 No.5974 Year of construction2009 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breakercheck 3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,36 m Weight5000 kg Floorspace5,72x1,76 m Extra SpecificationsWithout outlet lith. paddles are equipped with hardop welding. Powder turbo mixersAva-HuepMixers > Powder turbo mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working conditio ...
General SKU354T991 LocationBarneveld MakeRuberg Mischtechnik KG No.RMG 10/1647 Year of construction2000 Pressure Working pressure0 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume10 Ltr. Motor11 KW Specified Features - Paddle mixer Continuous mixercheck Useful capacity± 10 Ltr. Trough sizesDia: 140x940 mm InletDia: 64 mm OutletDia: 75 mm With jacketcheck capacity 10 Ltr. Max. temperature110 °C Glands air purgedcheck Motor11 kW, 400 Volt, 2950 rpm MaterialStainless steel 1.4301 (304) Information Mounted on framecheck With switchcheck With switchgearcheck( as is) Floor space2,8x1,1 m Total height1,9 m Weight700 kg Extra SpecificationsComes with an additional pin rotor. Paddle mixersRuberg Mischtechnik KGMixers > Paddle mixersBrand > Ruberg Mischtechnik KG What you can expect from Foeth: -- Machine is in working condition -- At ...
General SKU300P750 LocationBarneveld MakeFryma Maschinen AG (DE) TypeDelmix MZM-VK-7 No.L 14500 Year of construction1991 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter90 mm Specified Features - Colloid mill MaterialStainless steel EmulsifierVacuum emulsifying system Vacuum (t)check Rotor sizesdia.120mm With hopper+/- 7 ltr Hopper jacketed(+ 1 bar) Inletdia.90mm Outletdia.60mm Motor2,2 KW, 220/380 Volt With gate type stirrercheck With scraperscheck Motor0,12 KW, 220/380 Volt With vacuum pumpEdwards RV12 Motorcheck Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,8 M Total height1,7 M Weight240 KGColloid millsFrymaMills > Colloid millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination wor ...
General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: ...
General SKU207U080 LocationBarneveld Makem-tec mathis technik GmbH TypeTaumelmischanlage No.75300040001 Year of construction2004 Main Features MaterialMild steel Volume800 Ltr. Motor9.2 KW Specified Features - Tumbler mixer MaterialMild steel Tumbler mixercheck Barrel mixercheck Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Outletdia. 260 mm With motor9,2 kW 230/400 Volt Tumbler mixers Capacity190 Ltr., 800 Ltr. Inletdia. 450 mm Information Mounted on framecheck Total height3,6 m Weight3260 kg CEcheck Floorspace2,4x2,8 m Extra Specificationswith tank: : max. 190 Ltr., inlet: 450, outlet: 260 mm max. 800 Ltr., inlet: 450, outlet: 260 mmTumbler mixersM-Tec, Mathis TechnikMixers > Tumbler mixersBrand > M-Tec, Mathis Technik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any desti ...
General SKU202U012 LocationBarneveld MakeFryma-Maschinenbau GMBH TypeMS-18 No.M17181 Year of construction1996 Pressure Working pressure2.5 Bar Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1.1 Ltr. Motor10 KW Specified Features - Sand mill MaterialStainless steel Attritorcheck Vertical sandmillcheckCoBall mill Capacity1,1 Ltr. Housing dimensions Dia 200x135 mm Inlet15 mm Outlet15 mm With jacketcheck Max. temperature80 °C Motor10 kW, 400 Volt, 1465 rpm, (EX) Rotor speed1296 rpm Without ballscheck With pumpcheck Motor0,37 kW, 380-420/218-242 Volt, 1430 rpm Information Mounted on framecheck With switchcheck With switchgearcheck( as is) Weight480 kg CEcheck Floorspace1,2x0,9 m Total height1,76 m ATEX compatiblecheckSand millsFrymaMills > Sand millsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition ...
General SKU033E083 LocationBarneveld MakeWerner und Pfleiderer No.87170 Main Features MaterialStainless steel Volume0.5 Ltr. Motor2.2 KW Specified Features - Z-blade mixer Jacketcheck Capacity0,5Ltr. Double shaft kneader(1x) Single gearedcheck Trough sizes140x90x100mm With adjustable packing glandscheck With covercheck With manual operated tiltingcheck Motor1,6x2,2Kw.380Volt, flameproof Z-blade mixers MaterialStainless steel Information With switchcheck Floorspace1,2x0,6M Total height1,5M Extra SpecificationsStamp Z-blade mixersWerner & PfleidererKneaders > Z-blade mixersBrand > Werner & Pfleiderer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...
General SKU321S565 LocationBarneveld MakeHerbst Maschinenfabrik GmbH (D) TypeHRV-15 HO No.3103 Year of construction2000 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume15 Ltr. Motor0.37 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftcheck With scrapercheck Motor0,37 kW With pancheck Capacity15 ltr Pan sizesdia. 280x280mm Outletdia. 25mm With jacketcheck With electric heating3 kW With hydraulic liftingcheck With vacuum pumpcheck Motor0.12 kW 220-255/380-440 Volt MaterialStainless steel Planetary mixers Closed stirring vesselcheck Capacity15 ltr Vessel sizesdia280x280mm Dished bottomcheck Outletdia. 25mm With homogeniser900 Watt Information Mounted on wheelscheck With switchgearcheck Total height1,9 M Weight300 Kg CEcheck Floor space1,0x0,9 M Extra Specificationsincluding homogenizer P ...
General SKU323T842 LocationBarneveld MakeNetzsch TypeLME 60 No.204768 Year of construction1980 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor55 KW Specified Features - Sand mill MaterialMild steel, Stainless steel Horizontal sand millcheck Capacity60 ltr Housing dimensions Dia 410x1100 mm InletDia: 25 mm OutletDia: 60 mm With mechanical sealcheck With jacketcheck Motor55kW, 380 Volt, 1480 rpm (EX) Without ballscheck Information Mounted on framecheck With switchcheck(as is) Weight2500 kg Floorspace2,35x1,6 mtr Total height2,3 mtr ATEX compatiblecheckSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit u ...
General SKU315T1309 LocationBarneveld MakeTrefa TypeT2000 No.200.298 Year of construction2004 Main Features MaterialStainless steel Motor15 KW Rotor255 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Inlet70 mm, 65 mm Outlet70 mm (2x) Motor2x 15 kW, 400/690 Volt Rotor speed3480 rpm Capacity100-2000 kg/hour each head MaterialStainless steel Information Mounted on stainless st. framecheck With switchcheck Weight1400 kg CEcheck Floorspace2,8x1,1 m Total height1,8 m Extra SpecificationsDouble headFoam mixersTrefa AeratingMixers > Foam mixersBrand > Trefa Aerating What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mac ...
General SKU349T951 LocationBarneveld No.61.006 Year of construction1984 Main Features MaterialStainless steel Volume2000 Ltr. Motor5.5 KW Specified Features - Tumbler mixer Tumbler mixercheck Double cone tumbler mixercheck Capacity2000 Ltr. (± 1300 Ltr. net) Inlet50 mm (conus inlet dia. 100mm) With motor5,5 kW 220-242/380-420 Volt With brake motorcheck MaterialStainless steel 1.4301 (304) Information Mounted on mild steel framecheck With switchgearcheck(as is) Floorspace2x2,5 m CEcheck Total height4,05 m Weight3500 kg Extra Specificationsis supplied with control components (as is) Tumbler mixersServoliftMixers > Tumbler mixersBrand > Servolift What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nether ...
General SKU309T740 LocationBarneveld MakeBEBA Mischtechnik TypeBM 800 Main Features MaterialStainless steel Motor3 KW Rotor70 mm Specified Features - Foam mixer Foam mixeroscillation method Rotor/Stator with pinscheck Rotor sizesdia. 70 mm InletDN25 OutletDN25 Motor3 kW 400-690 Volt With frequency controllercheck With MonopumpNetzsch NM021RY Motor0,75 kW Netzsch NM021RY Speed301 rpm Capacity40-300 Ltr/h MaterialStainless steel 1.4571 (316Ti) Information With switchgearcheck Floorspace2,5x1,2 m Total height1,1 m CEcheck Weight680 kg Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersBEBA MischtechnikMixers > Foam mixersBrand > BEBA Mischtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Bar ...
General SKU069C433 LocationBarneveld MakeDalton Corp. Japan Type5-DMV No.0211 Year of constructionunknown Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume3 Ltr. Specified Features - Planetary mixer Planetary mixer(1x) 1 Mixing/kneading shaftcheck With scrapercheck Motorcheck With covercheck With pan(1x) Capacity3,0 Ltr (useful) Pan sizesdia. 200x150mm With jacketcheck With electric heatingcheck With manual operated liftingcheck MaterialStainless steel Information With switchcheck Floor space0,7x0,6 M Total height1,0 M Weight150 KGPlanetary mixersDalton JapanMixers > Planetary mixersBrand > Dalton Japan What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...
General SKU068B368 LocationBarneveld MakeRomicon (filter) TypeCTG 3 HF (Hollow Fiber) 21-75 PM-500 Year of constructionunknown Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel Filter/Rotary pump (1x) Information Mounted on wheelscheck Floor space1,1x0,7 M Total height2,1 M Weight200 KG Extra Specifications- Sanitary Rotary Pump make Nakamura Japan, type 25 VT-D Size 1,5 motor 0,75 KW, 220/380 Volt, with frequency inverter Miscellaneous filtersRomicon NakamuFilters > Miscellaneous filtersBrand > Romicon Nakamu What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU304M417 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0101-00 Year of construction1995 Main Features Motor1.35 KW Specified Features - Tumbler mixer Zig-Zag tumbler mixercheck Inlet300 X 185mm OutletDia. 240mm With motor1,35 KW, 400/690 Volt (Ex) Speed mixer26 Rpm With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 M Weight920 KG ATEX compatiblecheckTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU304M416 LocationBarneveld MakeNIRO A/S TypeCSS ZIG-ZAG 300mm No.080-0104-00 Year of construction1996 Main Features Motor1.35 KW Specified Features - Tumbler mixer MaterialStainless steel Zig-Zag tumbler mixercheck InletDia. 160mm / 300 x 185mm OutletDia. 195mm With motorcheck With safety gatescheck Information Floorspace2,4 x 1,2 M Total height1,6 KG Weight860 KGTumbler mixersGEA NiroMixers > Tumbler mixersBrand > GEA Niro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU294W557 LocationBarneveld MakeSchwarz TypeLP 600/800 No.01-56738 Year of construction1999 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L) Filtercheck Information Mounted on wheelsOn legs Floor space1,10 x 1,10 m Total height3,0 m Extra SpecificationsVolume 190 l. max pressure 10 bar. max temperature +2°C/+150°C Miscellaneous filtersSchwarzFilters > Miscellaneous filtersBrand > Schwarz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU292W526 LocationBarneveld MakeNetzsch TypeLMZ 25 No.204057 Year of construction1998 Main Features MaterialStainless steel Volume25 Ltr. Motor36 KW Specified Features - Sand mill MaterialStainless steel 1.4301 (304) Horizontal sand millcheck Capacity25 l Housing dimensions ø 345 x 570 mm InletDN50 OutletDN500 With sieve200 µm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor36 kW (400 V, 1480 rpm (Ex)) With variable speed drivecheck Information With switchcheck Weight2300 kg Floorspace2,0 x 0,80 m Total height1,7 m ATEX compatiblecheckSand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...
General SKU292W496 LocationBarneveld MakeNetzsch TypeLMZ25 No.204449 Year of construction1992 Pressure Working pressure2.5 Bar Main Features MaterialStainless steel Volume25 Ltr. Motor37 KW Specified Features - Sand mill Horizontal sand millcheck Capacity25 Ltr. Housing dimensions Dia. 400x600 mm InletDN25 OutletDN37 With sievecheck 0,4 mm With mechanical sealcheck With jacketcheck Motor37 kW, 380 volt With variable speed drive500-1000 rpm MaterialHeat-resistant stainless steel 1.4767 Sand mills Motor37 kW, 380 volt, 500-1000 rpm Information Mounted on framecheck With switchcheck Weight2000 kg Floorspace1,90 x 1,00 m Total height1,85 m ATEX compatiblecheck Technical specs Extra informationwith cooled rotor.Sand millsNetzschMills > Sand millsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared ...
General SKU300U1003 LocationBarneveld MakeCI Electronics Type195/36 Sade P2 No.TP595 Main Features MaterialStainless steel Specified Features - Miscellaneous transport MaterialStainless steel Information Floorspace0,80x0,65 m CEcheck Total height1,37 m Weight70 kg Extra SpecificationsTablet/capsule weight sorter, capacity: 5-2000 milligrams, processing 55 tablets/capsules per minute.Miscellaneous transportCI ElectronicsConveying systems > Miscellaneous transportBrand > CI Electronics What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0238 LocationBarneveld MakeZoz GmbH (D) TypeSimoloyer CM 01-2 L No.4205 Year of construction1999 Main Features MaterialStainless steel Volume2 Ltr. Motor1.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity2 Ltr. Housing dimensions dia. 140x130mm Inletdia 25mm Outletdia. 25mm With jacketcheck Motor1,5 kW 230/400 Volt Rotor speed200-1500 rpm MaterialStainless steel Information With switchgearcheck Total height1,4 M Weight400 Kg CEcheck Floorspace1,3x0,7 M Extra Specificationswith 3 extra houses with 5 extra rotors various spare parts Sand millsZozMills > Sand millsBrand > Zoz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...
maximum number of results exceeded
please refine your search
