mi used for sale

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

Assembly line with 4 assembly stationsRoller conveyor made of aluminium system profile and INTERROLL metal rollersVery universally applicable due to modular elements and assembly pallets 400x700 mmRoller conveyor elements made of aluminium system profile MiniTec - like BOSCH REXROTHExperium height: 815 mmComplete length: 13250 mm4 pieces Longitudinal roller conveyor: usable width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each3 pieces transverse roller conveyor: usable width 705 mm, length 1000 mm, width: 810 mm, 10 rollers each1 piece transverse roller conveyor: Usable width 705 mm, length 2500 mm, overall width: 810 mm, 30

Four Chiron CNC machining centers are available. Travel X/Y/Z: 1250mm/840mm/550mm, rapid traverse X/Y/Z: 60m/min, speed: 12000rpm, power: 22.5kW, torque: 140NM, tool positions: 24, tool holder: HSK-63, max. tool length: 320mm, machine weight: approx. 10000kg, control: Siemens 840D. Including IKZ, chip conveyor and Fibro swivel axis. Documentation available. On-site inspection is possible. Individual sale possible.

A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioni ...

Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible.

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible.

Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...

Niro-tech RX-150 single shaft paddle mixer, This RX-150 is made of stainless steel. The machine allows mixing in both directions. It is equipped with a single mixing shaft and moisture proof button control panel. Motor power 1.5 kW provides 5-48 rot. /min. The tank capacity is 150 liters, which allows filling it with 110 kg of meat. Unloading provided by tilting the drum to about 96 degrees. The mixer adapted to unloading directly to the standard buggies of 200 liters capacity., The dimensions of the machine: 1300 x 700 x 1600 (all in mm)

ratio: 1:47 revolutions per minute: 3.500 U/min taper ISO: 50 weight: 4,5 kg used milling accessory high-speed head: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: JÄCKEL MIG 405 output: 400 AP : water cooling unit: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 400 mm y-travel: 400 mm z-travel: 380 mm total power requirement: 2,6 kW weight of the machine ca.: 1,5t t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: 320 mm threading length: 570 mm thread pitch: 315 mm total power requirement: 17 kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 700 mm table width: 400 mm table load: t total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 80 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 ____________________________________________________________ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min.  ...

max. wheel diameter: 0 mm gear width: 150 mm max. module: 2,5 min. module: total power requirement: 10 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 150 mm gear width: 300 mm max. module: 4,5 min. module: total power requirement: 20 kW weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m P O S A L U X (Switzerland) Horizontal 3-Spindle Fine Boring Machines Model MICROFOR PNC 3 Year 1984 Serial Nos. 6.8230/9 Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With s ...

cycle time: 0 sec total power requirement: 2,5 kW weight of the machine ca.: 1 t dimensions of the machine ca.: m : : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mm Spindle stroke 0 - 18 mm Working stroke, max. 0 - 12 mm Quick feed 60 mm/sec Boring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpm Distance between spindles, vertical, approx. 80 mm Table speeds (for deburring) approx. 100 rpm Table Æ, approx. 100 mm Table bore, approx. 70 mm Table slide swivelling device, approx. 60 °/sec Swivelling range 0 - 100 ° Total drive, approx. 2.5 kW Weight 1,000 kg Accessories / Special Features Serial No. 6.8230/9 Machine is equipped with a modern POSALUX SELECTRON Control with keyboard and LED for direct programming on the machine (in principle the same as with a punchboard control). With setting microscope and machine lamp. The data for this ad was  ...

x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain turning speeds: 3150 U/min table surface area: 700x350 mm Table load: 400 kg spindle taper ISO: 40 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solutio ...

feed pressure: 8 bar Effective free air delivery: 120/220 L/min Receiver capacity: 50l / 10bar l / bar weight of the machine ca.: 24 kg. Number of cylinders: 1 Stk. motor: 230V / 1,5KW V / KW range L-W-H: 1,1 x 0,32 x 24 mm This compressor comes standard with: - Maintenance-free oil-free engine. - Safety valve. - Reduction valve with pressure gauge and coupling. - Drain cock on the tank. - Italian compressor of the highest quality. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V bore capacity in steel: 16 mm throat: 169 mm quill stroke: 50 mm turning speed range - drilling: 50 - 2250 U/min spindle drive: 0,5 kW total power requirement: 0,75 kW weight of the machine ca.: 0,175 t dimensions of the machine ca.: 1,3 x 0,65 x 1,3 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 85 mm capacity 90 degrees: square: 75 mm capacity 90 degrees: flat: 100x65 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: square: 75 mm capacity 60 degrees: flat: 90x60 mm total power requirement: 0,8 kW weight of the machine ca.: 0,04 t SPECIAL PRICE! The assembly saw with extensive standard equipment and a large cutting area · For miter cuts left up to 45° · For sawing steel, stainless steel and, to a limited extent, aluminum profiles · Automatic cooling directly on the saw blade · 24 V safety switch in the handle with restart lock · 38 kg total weight = easy to transport · Length stop, assembly tool Options: Saw blade 57 EUR Machine base type 20505 192,-EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 8 bar Effective free air delivery: 250/350 L/min Receiver capacity: 200l / 10bar l / bar weight of the machine ca.: 105 kg. Number of cylinders: 2 Stk. motor: 230V / 2,2KW V / KW range L-W-H: 1140 x 510 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1000 mm table load: 1200 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 1,0 U/min max. torque on the faceplate: 900 Nm welding current: 500 Ampere total power requirement: 0,75 + 0,75 kW weight of the machine ca.: 0,8 t Welding rotary tilting table - Remote control - 2 x welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 300 A open-circuit voltage: 55 - 76 V connected load frequency: 400 V weight: 150 kg Dimensions (LxWxH): 900 x 400 x 900 mm Accessories for inert gas welding machine: Hose package 4m. Earth cable 4m Accessories for inert gas welding machine: Hose package 4m. Ground cable 4m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

Rotary atomizer, nominal process gas flow rate: approx. 100 kg/h, water evaporation capacity: between 0.5 and 6 kg/h, inspection by appointment.

Suction capacity: 78m³/h, final pressure: 60mbar, motor power: 1.5kW, speed: 1500rpm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Laser power: 10W, Laser type: HyperRapid NX10, Mains voltage: 400V, 60Hz, Phases: L1+L2+L3+N+PE, rated current: 12.5A, peak current: 25A, rated power: 8.65kW, max. power: 17.3kW. Applications: Laser cleaning, laser marking, laser structuring, laser cutting. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2200mm, weight: approx. 4000kg. Documentation available.

Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible.

A Mitutoyo roundness analysis system without monitor is available. Rotation accuracy: 0.02 + 0.0006H, rotation speed: 2/4/6/8/10 rpm, max. workpiece weight: 30kg, max. workpiece diameter: 500mm, machine weight: approx. 200kg, control: Roundpak-400, version: 3.002. Documentation available. On-site inspection is possible.

total power requirement: 2,6 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 900 700 1175 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

table diameter: 800 mm table load: ? kg table height: - mm weight of the machine ca.: 560 kg dimensions of the machine ca.: 111 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible.

Two old Mitutoyo and Nikon projectors are available. 1) Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. 2) Nikon V-12, projection screen: 305mm, rotation range: 360°, lens compatibility: 10x/20x/50x/100x, resolution: +/-0.1%, max. workpiece height: 100mm, weight: approx. 80kg. On-site inspection is possible.

internal diameter: 2 - 40 mm grinding depth: 70 mm swing diameter: 285 mm total power requirement: 5,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m Machine in good working condition, with new e-motor for the working spindle drive. Machine video: https://youtu.be/N95AzX9D_QY Max. Distance chuck flange - wheelhead 390 mm Accessories: Grinding spindle, make PRECISE 20.000 - 66.000 rpm, power 1.3 kW Grinding spindle, make PRECISE 60.000 - 120.000 rpm, power 0.23 kW Magazine Machine documentation. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

x-travel: 710 mm y-travel: 500 mm z-travel: 500 mm table-size: 1080x580 mm spindle taper: SK40 spindle turning speed range: 10000 U/min tool change unit: 30 weight of the machine ca.: 10 t HEIDENHAIN TNC430 Coolant through spindle www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 3 x-travel: 1020 mm y-travel: 560 mm z-travel: 600 mm table surface area: 1000x560 mm table load: 1.35 t tool magazin:: numbers of tools: 40 max. tool diameter: 76 mm max. tool-dia with free toolbox: 125 mm max. tool length: 305 mm max. tool weight: 7 kg milling head: spindle taper:: SK40 spindle turning speed - stepless: 100-10000 U/min Power: 12/18 KW feeds -stepless-: 16000 mm/min rapid motion -longitudinal/cross/vertical: 40 m/min dimensions of the machine ca.: 3x2.3x2.6 m weight of the machine ca.: 6.8 t 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: SIEMENS 828 D for axes: 4 x-travel: 1800 mm y-travel: 800 mm z-travel: 700 mm table surface area: 1960x750 mm tool magazin:: numbers of tools: 24 max. tool diameter: 110 mm max. tool length: 300 mm max. tool weight: 15 kg spindle taper ISO: 50 spindle turning speed - stepless: 0-6000 U/min spindle drive: 18.5 kW feeds -stepless-: 0-10000 mm/min rapid motion -longitudinal/cross/vertical: 10 m/min voltage: 400 V dimensions of machine: 5000x3630x3295 mm weight: 16 t rotary table:: GSA+ CNC-320R tail stock: TS-B21 Coolant through spindle: pressure: 20 Bar 3D measuring tracer: RENISHAW OMP-60 Coolant installation: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 600x400 mm table height: x mm table load: x t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 900 mm z-travel: 800 mm control: HEIDENHAIN iTNC 530 for axes: 3 table surface area: 1700x850 mm tool magazin:: 30 spindle taper:: SK 40 spindle turning speed - stepless: 100-10000 U/min feeds infinitely variable to rapid traverse: 2-20000 mm/min voltage: 400 V dimensions of the machine ca.: 385x420x325 cm weight of the machine ca.: 18.6 t Coolant through spindle: pressure: 18 bar 3D measuring tracer: RENISHAW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 800 mm y-travel: 500 mm z-travel: 540 mm table-size: 910x500 mm spindle turning speed range: 10000 U/min tool magazin:: 24 weight of the machine ca.: 8 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deck Oven Miwe Electro EL 5.1216 A used Miwe Elektro EL 5.1216 deck oven with a total baking area of 10sqm is for sale and immediately available in the warehouse in Bielefeld. The oven is electrically heated with 5 shelves each 120cm wide and 160cm stove depth and with exhaust hood including fan.Backstuben oven used fully functional from Miwe for sale. - 5 shelves each 120x160cm - 5 floors are with 17cm bunk entrance height - Top floor is with 24cm floor entrance height - Each floor with separate Miwe FP control - Each floor can be turned on and off separately - Each floor with separate top and bottom heat control - Each floor with sepreate steam box for steam generation - With exhaust hood including fan - Stove cladding completely in stainless steel - Year of construction 2008 - 66 kW

There are 3 used kebab box packaging machines 2x 26 oz machine 1x 16 oz Machine The one 26 oz machine serves as spare parts The other two machines can be tested on site and are still in operation If you are interested, just write to us.